The privatization effect of MSW incineration services by using data envelopment analysis

This paper attempts to compare the relative efficiency across MSW incineration facilities under the three operating modes including government-owned government-operated (GOO), government-owned private-operated (GOPO), and private-owned private-operated (POPO) by using the Data Envelopment Analysis (DEA), and to examine the factor in affecting the efficiency variation. The results show that technical efficiency scores are 0.7538, 0.9046 and 0.9917 for GOO, GOPO and POPO, respectively. An ANOVA is conducted and the analysis result confirms that the operating mode has significant impact on technical efficiencies. A further examination on the operating contracts signed between governments and operating firms of GOPO facilities finds that both the price protection and quantity protection also play vital roles in affecting efficiencies.     

Application of the operating window concept to remediation‐option selection

An Erratum has been published for this article in Remediation 14(4) 2004, 141. The selection of remediation options for the management of unacceptable risks at contaminated sites is hindered by insufficient information on their performance under different site conditions. Therefore, there is a need to define “operating windows” for individual remediation options to summarize their performance under a variety of site conditions. The concept of the “operating window” has been applied as both a performance optimization tool and decision support tool in a number of different industries. Remediation‐option operating windows could be used as decision support tools during the “options appraisal” stage of the Model Procedures (CLR 11), proposed by the Environment Agency (EA) for England and Wales, to enhance the identification of “feasible remediation options” for “relevant pollutant linkages.” The development of remediation‐option operating windows involves: 1) the determination of relationships between site conditions (“critical variables”) and option performance parameters (e.g., contaminant degradation or removal rates) and 2) the identification of upper‐ and lower‐limit values (“operational limits”) for these variables that define the ranges of site conditions over which option performance is likely to be sufficient (the “operating window”) and insufficient (the “operating wall”) for managing risk. Some research has used case study data to determine relationships between critical variables and subsurface natural attenuation (NA) process rates. Despite the various challenges associated with the approach, these studies suggest that available case study data can be used to develop operating windows for monitored natural attenuation (MNA) and, indeed, other remediation options. It is envisaged that the development of remediation‐option operating windows will encourage the application of more innovative remediation options as opposed to excavation and disposal to landfill and/or on‐site containment, which remain the most commonly employed options in many countries. © 2004 Wiley Periodicals, Inc.     

主成分分析法在印染废水混凝试验中的应用

运用主成分分析法的双重图对印染废水混凝试验数据进行分析,揭示了在用复合絮凝剂处理印染废水混凝试验中多维工艺操作参数之间的相关性和各参数对混凝脱色的重要性,从而根据双重图来对混凝试验操作参数实行优化和控制。     

Transient design of landfill liquid addition systems

This study presents the development of design charts that can be used to estimate lateral and vertical spacing of liquids addition devices (e.g., vertical well, horizontal trenches) and the operating duration needed for transient operating conditions (conditions until steady-state operating conditions are achieved). These design charts should be used in conjunction with steady-state design charts published earlier by Jain et al., 2010a, Jain et al., 2010b. The data suggest that the liquids addition system operating time can be significantly reduced by utilizing moderately closer spacing between liquids addition devices than the spacing needed for steady-state conditions. These design charts can be used by designers to readily estimate achievable flow rate and lateral and vertical extents of the zone of impact from liquid addition devices, and analyze the sensitivity of various input variables (e.g., hydraulic conductivity, anisotropy, well radius, screen length) to the design. The applicability of the design charts, which are developed based on simulations of a continuously operated system, was also evaluated for the design of a system that would be operated intermittently (e.g., systems only operated during facility operating hours). The design charts somewhat underestimates the flow rate achieved and overestimates the lateral extent of the zone of impact over an operating duration for an intermittently operated system. The associated estimation errors would be smaller than the margin of errors associated with measurement of other key design inputs such as waste properties (e.g., hydraulic conductivity) and wider variation of these properties at a given site due to heterogeneous nature of waste.     

添加剂在630MW机组湿法脱硫系统上的应用

在湿法脱硫系统吸收塔浆液中加入少量添加剂,可以促进浆液中石灰石的溶解和SO2的吸收,提高系统的脱硫率1.5%～2.0%。同时也可在浆液较低的pH值下,防止脱硫设备结垢堵塞,增加系统运行的稳定性。加入添加剂后,系统在保证脱硫效率的前提下可少开1台浆液循环泵,降低了运行成本。     

State-of-the-art VOC abatement from soil-venting operations

The development of treatment technologies to limit the discharge of volatile organic compounds (VOCs) into the atmosphere has proceeded apace with the increasing use of soil venting for the remediation of contaminated soil. This article surveys the commonly-used emission control systems that have developed under air pollution control regulations in California. Emphasis is on equipment operating characteristics, typical performance results (destruction efficiencies of VOCs), and operating costs. A recently commercialized process for treating halogen-containing VOCs is described, and some operating and cost data are included.     

Synthesizing alternative sequences via a P-graph-based approach in azeotropic distillation systems

The present work proposes a P-graph based approach capable of systematically generating all combinatorially feasible alternative sequences for both continuous and batch azeotropic distillation systems when the feeds, products, and operating units and their concomitant intermediate materials are known. To facilitate synthesis, a highly effective method has been established to identify processing or operating units necessary for constructing azeotropic-distillation systems by means of first principles and logical sequencing of such units. The materials represented in the space of the residue curve map are partitioned into lumped materials bounded by thermodynamic boundaries and pinches, e.g. distillation boundaries and liquid–liquid phase equilibrium envelope. Subsequently, the operating units are identified on the basis of these lumped materials. The proposed approach automatically discards the operating units and intermediates whose inclusion will lead to infeasible sequences. The efficacy of the approach is illustrated with a realistic example.     

2×130t/h热电锅炉烟气脱硫工程调试及优化

分析了2×130t/h锅炉配套石灰石—石膏脱硫系统调试过程中出现的问题,提出了解决措施并对运行参数进行了优化。结果表明,在实际工况下,燃用中低硫煤,控制吸收塔液位为7.3m,pH值为5.4,投运2台循环泵时,脱硫系统运行最为经济有效。     

Simulation of the flue gas cleaning system of an RDF incineration power plant

Because of the stringent pollutant emission standards introduced with the European Union guidelines for waste incineration, it is very important to optimize the flue gas cleaning systems which are able to result in a low environmental impact according to the emission limits. In this paper a thermochemical model has been proposed for the simulation of the flue gas cleaning system of an RDF incineration plant. The model simulates the operation of the flue-gas treatment section and the combustion section by using a simplified approach. The combustion includes the grate incinerator and the post-combustion chamber, while the cleaning section includes the NO(x) reduction process (urea injection) and the scrubbing of SO(2) and HCl (Ca(OH)(2) as sorbent). The modelling has been conducted by means of ASPEN PLUS code. The simulation results have been validated with the operating data. The model proposed by the authors can be a useful tool in both evaluating the efficiency of the gas cleaning system by verifying the environmental pollution of an incinerator power plant in nominal operating conditions and in forecasting the efficiency of the cleaning system in off-design operating conditions.     

A laboratory pilot study of thermal decontamination of soils polluted by PCBs. Comparison with thermogravimetric analysis

Real soils contaminated with a mixture of polychlorinated biphenyls were thermally decontaminated in a laboratory scale thermal desorption apparatus, under different operating conditions including two operating pressures (P= 0.01 and 0.1 MPa), different sample masses (80-320 g), carrier gas flow rates (0-30-280 Nl h(-1)) and two initial contamination levels. A standard European soil artificially contaminated with 4-chlorobiphenyl was decontaminated using a thermogravimetric analyser (TGA). The same parametric study as cited earlier was performed. With both techniques, the extent of decontamination was studied as a function of temperature during the heating programs (2-3 degrees C min(-1) for the thermal desorption apparatus; 5 degrees C min(-1) for TGA). Only a few differences were noticed between the two techniques. The decontamination starts when the melting temperature of the contaminant is reached (30 degrees C) and is complete before 350 degrees C. Thermogravimetric analysis which does not necessitate any chemical analysis appears to be a very attractive technique to investigate the feasibility of a decontamination and to quickly determine the best operating conditions.     

Sulfide emissions from different areas of a municipal solid waste landfill in China

Degradation of municipal solid waste in landfills generates sulfide compounds, which are considered one of the main sources of odor emissions. Field sampling was conducted at surfaces of operating, inoperative, and soil-covered areas of a landfill site in northern China to characterize the sulfide compounds. The results showed that dimethyl disulfide dominated the sulfide compounds, accounting for up to 73.6% of the total detected sulfide. With the biggest odor concentration of 365, diethyl sulfide was the most significant sulfide compound. The estimated sulfide emission rates at surfaces of operating and soil-covered areas were similar, and the emission rate of dimethyl disulfide at Surface of Operating Area was up to 345.9 μg/m³ h. Dimethyl disulfide could be released from the fresh waste, and its normalized concentration at 0.2 m beneath operating surface was 10.4 times that at 0.4 m.     

Effectiveness of gutter brushes in removing street sweeping waste

Litter on roadways has to be removed for hygiene and to reduce pollution, amongst other reasons. Therefore, the effective operation of street sweepers is important in the collection of solid waste. In this article, the effectiveness of gutter brushes of street sweepers in removing different debris types, namely medium-size gravel, small and fine particles, and wet thin debris is studied by means of sweeping tests using a brushing test rig. Two types of gutter brushes, cutting and F128, are tested under a variety of operating conditions. The experimental tests provide a means of identifying suitable ranges of brush penetration for the different debris types under defined operating parameters such as brush angle of attack, brush rotational speed, and sweeper velocity. These ranges may provide sufficiently high removal forces and avoid the occurrence of sweeping problems such as backward sweeping and inappropriate bristle–surface contact. Optimum operating parameters for the three debris types studied, as well as a mixture of all of them, are determined. Lastly, the results indicate that, as far as the sweeping effectiveness is concerned, the F128 brush is the preferred one for the cases studied.     

纳滤膜处理含锰废水

采用纳滤膜处理电解锰生产过程中产生的含锰废水,考察了操作压力、阻垢剂和反冲洗等因素对膜通量和各金属离子截留率的影响。实验结果表明:操作压力越大,膜通量越大,且膜通量随运行时间延长下降得越快;在操作压力为2.0 MPa的条件下,纳滤膜对Mg2+的截留率为90.69%,对Mn2+的截留率为89.72%,对Ca2+的截留率最高,达100%;加入阻垢剂后,纳滤膜的膜通量比未加入阻垢剂时的膜通量略大;反冲洗4次后,膜通量均可完全恢复。     

Solar pyrolysis of scrap tire: optimization of operating parameters

Journal of Material Cycles and Waste Management - Pyrolysis of scrap tire using concentrated solar radiation is a novel way to upgrade feedstock. In this investigation, best operating condition for...     

Results of the German dioxin measurement programme at MSW incinerators

This paper described the findings and data resulting from the German National Dioxin Measurement Programme at 11 plants with 15 incineration units. The programme's main focus was to provide answers to the question of the causes of dioxins and furans formation in the plant and to look for ways to reduce dioxin and furan emissions, including waste management measures and technical measures taken inside the plants. The investigations confirmed the finding that a major proportion of the dioxin and furan emissions is due to de novo synthesis. Two areas have to be mentioned here, the cooling zone behind the combustion chamber and the dust removal system.Significant differences in dioxin and furan concentration levels were ascertained between variations of operating parameters, e.g. much air, little air, extremely unfavourable operating conditions (i.e. start-up and shut-down without auxiliary burners) and the normal operating conditions specific to a plant. To comply the limit value of 0.1 ng I-TE m⁻³ it is necessary that conventional thermal treatment plants take additional measures to remove dioxins and furans from the flue gas. The measurements were carried out from 1985 to 1990. In addition, samples of fractions of household waste were analysed for their dioxins and furans.     

制皂工业废水处理新工艺

介绍了用脱硫-混凝-膜过滤处理制皂工业废水的新工艺,并就担任条件的变化对试验结果的影响进行了分析和探讨。     

Aerobic composting of waste activated sludge: kinetic analysis for microbiological reaction and oxygen consumption

In order to examine the optimal design and operating parameters, kinetics for microbiological reaction and oxygen consumption in composting of waste activated sludge were quantitatively examined. A series of experiments was conducted to discuss the optimal operating parameters for aerobic composting of waste activated sludge obtained from Kawagoe City Wastewater Treatment Plant (Saitama, Japan) using 4 and 20 L laboratory scale bioreactors. Aeration rate, compositions of compost mixture and height of compost pile were investigated as main design and operating parameters. The optimal aerobic composting of waste activated sludge was found at the aeration rate of 2.0 L/min/kg (initial composting mixture dry weight). A compost pile up to 0.5 m could be operated effectively. A simple model for composting of waste activated sludge in a composting reactor was developed by assuming that a solid phase of compost mixture is well mixed and the kinetics for microbiological reaction is represented by a Monod-type equation. The model predictions could fit the experimental data for decomposition of waste activated sludge with an average deviation of 2.14%. Oxygen consumption during composting was also examined using a simplified model in which the oxygen consumption was represented by a Monod-type equation and the axial distribution of oxygen concentration in the composting pile was described by a plug-flow model. The predictions could satisfactorily simulate the experiment results for the average maximum oxygen consumption rate during aerobic composting with an average deviation of 7.4%.     

油田高含盐污水雾化蒸发的数值模拟

基于FLUENT软件,对油田高含盐污水的雾化蒸发过程进行了数值模拟,得到了逆流型雾化蒸发塔内的流场分布特性,对比分析了不同操作参数对蒸发效果的影响。结果表明:液滴蒸发速率沿塔体中心轴线自上而下呈加快趋势;进口空气流速与温度是影响液滴蒸发的关键操作参数,提高流速及温度均可加快液滴的蒸发速率;当进口空气流速达到0.4 m/s后,对蒸发速率的影响减弱;当进口空气温度达到313 K后,对蒸发速率的提高作用不大;喷雾锥角的变化对蒸发速率影响不明显;液滴越细化,蒸发速率越快。     

A/O装置处理表面活性剂废水的运行经验

介绍了表面活性剂废水处理装置的工艺流程,重点分析了影响A／O装置处理效果的因素,提出了适合该废水处理的运行模式及工艺控制指标,出水COD＜120mg／L。     

Survey of carbonization facilities for municipal solid waste treatment in Japan

The operations of carbonization facilities for municipal solid waste treatment in Japan were examined. Input waste, system processes, material flows, quality of char and its utilization, fuel and chemical consumption, control of facility emissions, and trouble areas in facility operation were investigated and analyzed. Although carbonization is a technically available thermochemical conversion method for municipal solid waste treatment, problems of energy efficiency and char utilization must be solved for carbonization to be competitive. Possible solutions include (1) optimizing the composition of input waste, treatment scale, organization of unit processes, operational methods, and quality and yield of char on the basis of analysis and feedback of long-term operating data of present operating facilities and (2) securing stable char demands by linking with local industries such as thermal electric power companies, iron manufacturing plants, and cement production plants.