Excellent performance of Cu-Mn/Ti-sepiolite catalysts for low-temperature CO oxidation

The Ti-modified sepiolite (Ti-Sep)-supported Mn-Cu mixed oxide (yMn5Cu/Ti-Sep) catalysts were synthesized using the co-precipitation method. The materials were characterized by the X-ray diffraction scanning electron microscope, N₂ adsorption-desorption, H₂-TPR, O₂-TPD, and XPS techniques, and their catalytic activities for CO oxidation were evaluated. It was found that the catalytic activities of yMn5Cu/Ti-Sep were higher than those of 5Cu/Ti-Sep and 30Mn/Ti-Sep, and the Mn/Cu molar ratio had a distinct influence on catalytic activity of the sample. Among the yMn5Cu/Ti- Sep samples, the 30Mn5Cu/Ti-Sep catalyst showed the best activity (which also outperformed the 30Mn5Cu/Sep catalyst), giving the highest reaction rate of 0.875 × 10^–3 mmol·g^–1·s^–1 and the lowest T _50% and T _100% of 56°C and 86°C, respectively. Moreover, the 30Mn5Cu/Ti-Sep possessed the best low-temperature reducibility, the lowest O₂ desorption temperature, and the highest surface Mn³⁺/Mn⁴⁺ atomic ratio. It is concluded that factors, such as the strong interaction between the copper or manganese oxides and the Ti-Sep support, good low-temperature reducibility, and good mobility of chemisorbed oxygen species, were responsible for the excellent catalytic activity of 30Mn5Cu/Ti-Sep.

Open image in new window

     

Iron-doped copper 1,4-benzenedicarboxylate as photo-Fenton catalyst for degradation of methylene blue

Abstract

A metal-organic framework of iron-doped copper 1,4-benzenedicarboxylate was synthesized and, for the first time, utilized as a heterogeneous photo-Fenton catalyst for degradation of methylene blue dye in aqueous solution under visible light irradiation. The synthesized materials were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and energy-dispersive X-ray spectroscopy. The influence factors, kinetics, and stability of the synthesized catalysts were investigated in detail. Iron-doped copper 1,4-benzenedicarboxylate showed higher degradation efficiency than pure copper 1,4-benzenedicarboxylate. An almost complete degradation was achieved within 70?min under visible light irradiation at a solution pH of 6, a catalyst loading of 1?g?L^?1, a H₂O₂ dosage of 0.05?mol L^?1 and methylene blue concentration of 50?mg?L^?1. Recycling studies demonstrated that the iron-doped copper 1,4-benzenedicarboxylate is a promising heterogeneous photo-Fenton catalyst for long-term removal of methylene blue dye from industrial wastewater.     

Characterization and performance of V2O5/CeO2 for NH3-SCR of NO at low temperatures

A series of CeO₂ supported V₂O₅ catalysts with various loadings were prepared with different calcination temperatures by the incipient impregnation. The catalysts were evaluated for low temperature selective catalytic reduction (SCR) of NO with ammonia (NH₃). The effects of O₂ and SO₂ on catalytic activity were also studied. The catalysts were characterized by specific surface areas (S_BET) and X-ray diffraction (XRD) methods. The experimental results showed that NO conversion changed significantly with the different V₂O₅ loading and calcination temperature. With the V₂O₅ loading increasing from 0 to 10 wt%, NO conversion increased significantly, but decreased at higher loading. The optimum calcination temperature was 400°C. The best catalyst yielded above 80% NO conversion in the reaction temperature range of 160°C–300°C. The formation of CeVO₄ on the surface of catalysts caused the decrease of redox ability.     

Pt/Mg-Ce-O catalyst for NO/H<Subscript>2</Subscript>/O<Subscript>2</Subscript> lean de-No<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> reaction

The NO/H₂/O₂ reaction was studied under oxidizing conditions in the 100-400 °C range over 0.1 wt% Pt supported on various metal oxides such as MgO, CeO₂, SiO₂, La₂O₃, CaO, Y₂O₃ and TiO₂. The Pt/MgO and Pt/CeO₂ catalysts showed good catalytic behaviours. Here, we find that the Pt/Mg-Ce-O catalyst, prepared from MgO and CeO₂ by the sol-gel method, is a very active and selective catalyst towards N₂ formation in the whole 100–400 °C range. This catalyst appears to be the most active, selective and stable one ever reported in the literature for the NO/H₂/O₂ reaction, even in the presence of 5%v H₂O or 20 ppmv of SO₂ in the feed stream.Selected article from the Regional Symposium on Chemistry and Environment, Krusevac, Serbia, June 2003, organised by Dr. Branimir Jovancicevic.     

Thermochemical conversion of municipal solid waste into energy and hydrogen: a review

The rising global population is inducing a fast increase in the amount of municipal waste and, in turn, issues of rising cost and environmental pollution. Therefore, alternative treatments such as waste-to-energy should be developed in the context of the circular economy. Here, we review the conversion of municipal solid waste into energy using thermochemical methods such as gasification, combustion, pyrolysis and torrefaction. Energy yield depends on operating conditions and feedstock composition. For instance, torrefaction of municipal waste at 200 °C generates a heating value of 33.01 MJ/kg, while the co-pyrolysis of cereals and peanut waste yields a heating value of 31.44 MJ/kg at 540 °C. Gasification at 800 °C shows higher carbon conversion for plastics, of 94.48%, than for waste wood and grass pellets, of 70–75%. Integrating two or more thermochemical treatments is actually gaining high momentum due to higher energy yield. We also review reforming catalysts to enhance dihydrogen production, such as nickel on support materials such as CaTiO₃, SrTiO₃, BaTiO₃, Al₂O₃, TiO₃, MgO, ZrO₂. Techno-economic analysis, sensitivity analysis and life cycle assessment are discussed.

     

Acute associations between air pollution on premature rupture of membranes in Hefei,China

Numerous studies had focused on the association between air pollution and health outcomes in recent years. However, little evidence is available on associations between air pollutants and premature rupture of membranes (PROM). Therefore, we performed time-series analysis to evaluate the association between PROM and air pollution. The daily average concentrations of PM_2.5, SO₂ and NO₂ were 54.58 μg/m³, 13.06 μg/m³ and 46.09 μg/m³, respectively, and daily maximum 8-h average O₃ concentration was 95.67 μg/m³. The strongest effects of SO₂, NO₂ and O₃ were found in lag4, lag06 and lag09, and an increase of 10 μg/m³ in SO₂, NO₂ and O₃ was corresponding to increase in incidence of PROM of 8.74% (95% CI 2.12–15.79%), 3.09% (95% CI 0.64–5.59%) and 1.68% (95% CI 0.28–3.09%), respectively. There were no significant effects of PM_2.5 on PROM. Season-specific analyses found that the effects of PM_2.5, SO₂ and O₃ on PROM were more obvious in cold season, but the statistically significant effect of NO₂ was observed in warm season. We also found the modifying effects by maternal age on PROM, and we found that the effects of SO₂ and NO₂ on PROM were higher among younger mothers (<?35 years) than advanced age mothers (≥?35 years); however,?≥?35 years group were more vulnerable to O₃ than?<?35 years group. This study indicates that air pollution exposure is an important risk factor for PROM and we wish this study could provide evidence to local government to take rigid approaches to control emissions of air pollutants.

     

Evidence for a new mechanism of Fe2O3 decomposition in lightweight aggregate formation

Hematite (Fe₂O₃) chemical reduction into FeO and Fe₃O₄ by releasing O₂ at high temperatures is considered one of the generally accepted mechanisms for processing waste minerals and clay into lightweight aggregate construction materials. In many case studies, this mechanism has not been strictly confirmed. To verify whether hematite can effectively release O₂ at 1,000–1,260°C, a material containing hematite, simulating waste sediments from a Taiwanese reservoir, was shaped into pellets and fired into lightweight aggregates at high temperatures for 20 min and studied with various techniques. As revealed by the X-ray absorption near-edge structure technique, almost all the hematite remained as Fe(III) in the pellets when fired at 1,000–1,260°C, implying a negligible release of O₂ leading to the creation of pores. This finding shows that the generally accepted mechanism for lightweight aggregate formation associated with hematite decomposition into FeO, Fe₃O₄, and O₂ is invalid. Furthermore, Fe(III)-containing composites were formed in the fired pellets. Although firing at 1,000°C can trigger the decomposition of the components K₂CO₃, Na₂CO₃, and CaCO₃ with a release of CO₂, the sintering reaction was seemingly too weak to encapsulate the gases effectively. For pellets fired at 1,050–1,150°C, pores grew in size because the sintering reaction sufficed to generate a glassy phase that could better encapsulate gases.     

Effects of three different nanoparticles on bioaccumulation,oxidative stress,osmoregulatory, and immune responses of Carcinus aestuarii

Abstract

In this study, the toxicity of CuO (40?nm), α-Al₂O₃ (40?nm), and α-Fe₂O₃ (20–40?nm) nanoparticles was comparatively investigated on Carcinus aestuarii. Crabs were semi-statically exposed to 1?mg/L of each for 14?days and their accumulation and distribution in tissue and hemolymph, potential oxidative stress mechanism, total hemocyte counts and types, and the osmoregulatory and ionoregulatory responses were determined. The tissue distribution of CuO nanoparticles was hepatopancreas?>?hemolymph?≥?gill?> muscle, for α-Fe₂O₃ gill?>?hepatopancreas?>?muscle?> hemolymph, and for α-Al₂O₃ gill?>?muscle?≥?hemolymph?> hepatopancreas. While α-Al₂O₃ and α-Fe₂O₃ NPs, induced lipid peroxidation and changes in antioxidant enzyme activity in the hepatopancreas tissue, the oxidative damage caused by the CuO nanoparticles was minimal. All three nanoparticles, copper in particular, elicit osmoregulatory and ionoregulatory toxicity at this concentration, due to the inhibition of Na⁺, K⁺-ATPase activity in the gill and depletion of hemolymph and carcass ion concentrations.     

Abatement of mixed volatile organic compounds in a catalytic hybrid surface/packed-bed discharge plasma reactor

In this study, post plasma-catalysis degradation of mixed volatile organic compounds (benzene, toluene, and xylene) has been performed in a hybrid surface/packed-bed discharge plasma reactor with Ag-Ce/g-Al₂O₃ catalyst at room temperature. The effect of relative air humidity on mixed VOCs degradation has also been investigated in both plasma-only and PPC systems. In comparison to the plasma-only system, a significant improvement can be observed in the degradation performance of mixed VOCs in PPC system with Ag-Ce/γ-Al₂O₃ catalyst. In PPC system, 68% benzene, 89% toluene, and 94% xylene were degraded at 800 J·L^–1, respectively, which were 25%, 11%, and 9% higher than those in plasma-only system. This result can be attributed to the high catalytic activity of Ag-Ce/γ-Al₂O₃ catalyst to effectively decompose O₃ and lead to generating more reactive species which are capable of destructing the VOCs molecules completely. Moreover, the presence of Ag-Ce/γ-Al₂O₃ catalyst in plasma significantly decreased the emission of discharge byproducts (NO_x and O₃) and promoted the mineralization of mixed VOCs towards CO₂. Adding a small amount of water vapor into PPC system enhanced the degradation efficiencies of mixed VOCs, however, further increasing water vapor had a negative impact on the degradation efficiencies, which was primarily attributed to the quenching of energetic electrons by water vapor in plasma and the competitive adsorption of water vapor on the catalyst surface. Meanwhile, the catalysts before and after discharge were characterized by the Brunauer-Emment-Teller and X-ray photoelectron spectroscopy.

Open image in new window

     

Synthesis, physicochemical characterizations and catalytic performance of Pd/carbon-zeolite and Pd/carbon-CeO2 nanocatalysts used for total oxidation of xylene at low temperatures

In this work, xylene removal from waste gas streams was investigated via catalytic oxidation over Pd/carbon-zeolite and Pd/carbon-CeO₂ nanocatalysts. Activated carbon was obtained from pine cone chemically activated using ZnCl₂ and modified by H₃PO₄. Natural zeolite of clinoptilolite was modified by acid treatment with HCl, while nano-ceria was synthesized via redox method. Mixed supports of carbon-zeolite and carbonceria were prepared and palladium was dispersed over them via impregnation method. The prepared samples were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller surface area (BET), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric (TG) techniques. Characterization of nanocatalysts revealed a good morphology with an average particle size in a nano range, and confirmed the formation of nano-ceria with an average crystallite size below 60 nm. BET analysis indicated a considerable surface area for catalysts (～1000 m²·g^?1). FTIR patterns demonstrated that the surface groups of synthesized catalysts are in good agreement with the patterns of materials applied in catalyst synthesis. The performance of catalysts was assessed in a low-pressure catalytic oxidation pilot in the temperature range of 100° C-250°C. According to the reaction data, the synthesized catalysts have been shown to be so advantageous in the removal of volatile organic compounds (VOCs), representing high catalytic performance of 98% for the abatement of xylene at 250°C. Furthermore, a reaction network is proposed for catalytic oxidation of xylene over nanocatalysts.     

Effect of nitrification inhibitor on plant biomass and N2O emission rates in alpine meadows on the Tibetan Plateau

ABSTRACT

Treatment with nitrification inhibitors, such as dicyandiamide (DCD) and 3,4-dimethylpyrazole phosphate (DMPP) have been strongly indicated to increase grassland biomass and mitigate soil N₂O emission rates. However, the responses of both alpine meadow aboveground biomass and N₂O emission rates to nitrification inhibitors remains unclear. We separately applied three doses of DCD and DMPP to alpine grassland soils with three duplicates. The biomass and N₂O emission rates were subsequently measured by a clear-cut method and in-situ static chamber gas chromatography during the growing season. Our findings indicated that aboveground biomass increased significantly, and N₂O emission rate decreased significantly at 6.8?kg?ha^?1 DCD and DMPP. Furthermore, the biomass increase effect was more significant than the N₂O emission rate mitigation effect (p?<?0.05). The highest ratios of DCD treatments on meadow production increase and N₂O emission rate decrease were 27.2% and 36.3%, respectively. Our findings provide insight into the enhanced grassland primary production and decreased N₂O flux by nitrification inhibitor treatment in alpine meadows, which may be beneficial to help mitigate global warming.     

Synthesis and antibacterial activity of a Fe3O4–AgCl nanocomposite against Escherichia coli

In this investigation, Fe₃O₄ magnetic nanoparticles (MNPs) were prepared by the alkalinization of an aqueous medium containing ferrous sulfate and ferric chloride. In the next step, a Fe₃O₄–AgCl magnetic nanocomposite was fabricated by the drop-by-drop addition of silver nitrate solution into a NaCl solution containing Fe₃O₄ MNPs. All prepared nanoparticles were characterized by transition electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). Both particle types varied in size from 2.5 to 20?nm, with an average size of 7.5?nm for Fe₃O₄ MNPs and 12.5?nm for Fe₃O₄–AgCl nanocomposites. The antibacterial effect of the Fe₃O₄ MNPs and fabricated Fe₃O₄–AgCl nanocomposites against Escherichia coli (ATCC 35218) were investigated by conventional serial agar dilution method using the Müller–Hinton Agar medium. The minimum inhibitory concentration was 4?mg?mL^?1 for Fe₃O₄ MNPs and 2?mg?mL^?1 for the Fe₃O₄–AgCl magnetic nanocomposites. Time-kill course assays showed that the Fe₃O₄–AgCl magnetic nanocomposites successfully killed all inoculated bacterial cells during an exposure time of 60?min. The antibacterial activity of recycled Fe₃O₄–AgCl magnetic nanocomposites over four 60?min cycles of antibacterial treatment was further tested against E. coli by the colony-forming unit (CFU) method. The antibacterial efficiency of the nanocomposites was constant over two cycles of antibacterial testing.     

Investigation of fluorescence characterization and electrochemical behavior on the catalysts of nanosized Pt-Rh/γ-Al2O3 to oxidize gaseous ammonia

This work describes the environmentally friendly technology for oxidation of ammonia (NH₃) to form nitrogen at temperatures range from 423K to 673K by selective catalytic oxidation (SCO) over a nanosized Pt-Rh/γ-Al₂O₃ catalyst prepared by the incipient wetness impregnation method of hexachloroplatinic acid (H₂PtCl₆) and rhodium (III) nitrate (Rh(NO₃)₃) with γ-Al₂O₃ in a tubular fixed-bed flow quartz reactor (TFBR). The characterization of catalysts were thoroughly measured using transmission electron microscopy (TEM), threedimensional excitation-emission fluorescent matrix (EEFM) spectroscopy, UV-Vis absorption, dynamic lightscattering (DLS), zeta potential meter, and cyclic voltammetry (CV). The results demonstrated that at a temperature of 673K and an oxygen content of 4%, approximately 99% of the NH₃ was removed by catalytic oxidation over the nanosized Pt-Rh/γ-Al₂O₃ catalyst. N₂ was the main product in NH₃-SCO process. Further, it reveals that the oxidation of NH₃ was proceeds by the over-oxidation of NH₃ into NO, which was conversely reacted with the NH₃ to yield N₂. Therefore, the application of nanosized Pt-Rh/γ-Al₂O₃ catalyst can significantly enhance the catalytic activity toward NH₃ oxidation. One fluorescent peak for fresh catalyst was different with that of exhausted catalyst. It indicates that EEFM spectroscopy was proven to be an appropriate and effective method to characterize the Pt clusters in intrinsic emission from nanosized Pt-Rh/γ-Al₂O₃ catalyst. Results obtained from the CV may explain the significant catalytic activity of the catalysts.     

Enhanced heterogeneous Fenton-like activity by Cu-doped BiFeO<Subscript>3</Subscript> perovskite for degradation of organic pollutants

Heterogeneous Fenton-like reaction has been extensively investigated to eliminate refractory organic contaminants in wastewater, but it usually shows low catalytic performance due to difficulty in reduction from Fe(III) to Fe(II). In this study, enhanced catalytic efficiency was obtained by employing Cu-doped BiFeO₃ as heterogeneous Fenton-like catalysts, which exhibited higher catalytic performance toward the activation of H₂O₂ for phenol degradation than un-doped BiFeO₃. BiFe_0.8Cu_0.2O₃ displayed the best performance, which yielded 91% removal of phenol (10 mg L^–1) in 120 min. The pseudo first-order kinetic rate constant of phenol degradation in BiFe_0.8Cu_0.2O₃ catalyzed heterogeneous Fenton-like reaction was 5 times higher than those of traditional heterogeneous Fenton-like catalysts, such as Fe₃O₄ and goethite. The phenol degradation efficiency could still reach 83% after 4 cycles, which implied the good stability of BiFe_0.8Cu_0.2O₃. The high catalytic activity of BiFe_0.8Cu_0.2O₃ was attributed to the fact that the doping Cu into BiFeO₃ could promote the generation of Fe(II) in the catalyst and then facilitate the activation of H₂O₂ to degrade the organic pollutants.

Open image in new window

     

Novel synthetic approaches and TWC catalytic performance of flower-like Pt/CeO2

A novel Ultrasonic Assisted Membrane Reduction （UAMR）-hydrothermal method was used to prepare flower-like Pt/CeO2 catalysts. The texture, physical/chemical properties, and reducibility of the flower-like Pt/CeO2 catalysts were characterized by X-Ray Diffraction （XRD）, Scanning Electron Microscope （SEM）, Transmission Electron Microscope （TEM）, N2 adsorption, and hydrogen temperature programmed reduction （HE-TPR） techniques. The catalytic performance of the catalysts for treating automobile emission was studied relative to samples prepared by the conventional wetness impregnation method. The Pt/CeO2 catalysts fabricated by this novel method showed high specific surface area and metal dispersion, excellent three-way catalytic activity, and good thermal stability. The strong interaction between the Pt nanoparticles and CeO2 improved the thermal stability. The Ce4＋ ions were incorporated into the surfactant chains and the Pt nanoparticles were stabilized through an exchange reaction of the surface hydroxyl groups. The SEM results demonstrated that the Pt/CeO2 catalysts had a typical three-dimensional （3D） hierarchical porous struc- ture, which was favorable for surface reaction and enhanced the exposure degree of the Pt nanoparticles. In brief, the flower-like Pt/CeO2 catalysts prepared by UAMR-hydrothermal method exhibited a higher Pt metal dispersion, smaller particle size, better three-way catalytic activity, and improved thermal stability versus conven- tional materials.     

Role of Rh promoter on increasing stability of Au/Al2O3 catalyst for CO oxidation at low temperature

The Au/Al₂O₃ and Au–Rh/Al₂O₃ catalysts were prepared by deposition–precipitation. The promotional effect of Rh on the performance of the Au/Al₂O₃ catalyst for CO oxidation was studied. The results indicate that using Au/Al₂O₃ catalyst, CO can be completely oxidized at 0°C or much lower temperature but the catalyst deactivated very fast. Rh can improve the stability of Au/Al₂O₃ catalyst more than 10 times, which gives an important hint to develop high stable catalyst for CO oxidation at low temperature.     

Catalytic ozonation performance and surface property of supported Fe3O4 catalysts dispersions

Fe₃O₄ was supported on mesoporous Al₂O₃ or SiO₂ (50 wt.%) using an incipient wetness impregnation method, and Fe₃O₄/Al₂O₃ exhibited higher catalytic efficiency for the degradation of 2,4-dichlorophenoxyacetic acid and para-chlorobenzoic acid aqueous solution with ozone. The effect and morphology of supported Fe₃O₄ on catalytic ozonation performance were investigated based on the characterization results of X-ray diffraction, X-ray photoelectron spectroscopy, BET analysis and Fourier transform infrared spectroscopy. The results indicated that the physical and chemical properties of the catalyst supports especially their Lewis acid sites had a significant influence on the catalytic activity. In comparison with SiO₂, more Lewis acid sites existed on the surface of Al₂O₃, resulting in higher catalytic ozonation activity. During the reaction process, no significant Fe ions release was observed. Moreover, Fe₃O₄/Al₂O₃ exhibited stable structure and activity after successive cyclic experiments. The results indicated that the catalyst is a promising ozonation catalyst with magnetic separation in drinking water treatment.     

Removal of Eu3+, Ce3+, Sr2+, and Cs+ ions from radioactive waste solutions by modified activated carbon prepared from coconut shells

As a biomass agricultural waste material, coconut shells were used for the preparation of high-quality modified activated carbon. Chemical modification of the surface of the prepared activated carbon is done by oxidation using H₂O₂ and HNO₃, respectively. The surface area and pore volume of the coconut shells activated carbon are increased by the chemical modification, and followingly the removal of the metals is improved. The structural morphology and composition of the modified activated carbon coconut shells (MACCS) were evaluated by Fourier transform infrared (FTIR) spectra, thermogravimetric analysis–differential thermal analysis (TGA-DTA), scanning electron microscope (SEM), X-ray diffraction (XRD), surface area analysis (SAA), X-ray fluorescence (XRF), and carbon, hydrogen, nitrogen, and sulfur (CHNS) elemental analysis. The prepared MACCS has reasonably good chemical stability. The influence of solution pH, contact time, adsorbent dosage, adsorption temperature, initial metal concentrations, and interfering ions on the adsorption performance of the investigated ions onto the prepared sorbent was examined by a batch method. The selectivity sequence for sorption of Eu³⁺, Ce³⁺, Sr²⁺, and Cs⁺ ions on MACCS was found to be Eu^3+?>?Ce^3+?>?Sr^2+?>?Cs⁺. The saturation capacities of MACCS for the studied metal ions were found to be 136.84, 85.55, 69.85, and 60.00?mg?g^?1 for Eu³⁺, Ce³⁺, Sr²⁺, and Cs⁺ ions, respectively. The thermodynamic parameters, ΔH°, ΔS°, and ΔG° were also evaluated.     

Green synthesis and characterization of metal ions-mixed titania for application in dye-sensitized solar cells

Abstract

The objective of the present study is to synthesize various metal ions mixed TiO₂ nanoparticles using a continuous hydrothermal synthesis pilot reactor for dye-sensitized solar cells (DSCs). In the pilot plant, aqueous solutions of the metal salts are mixed with a flow of supercritical water (450?°C and 24.1?MPa) in a confined jet mixer for continuous synthesis of metal ions-mixed nano-titania. Characterization of the particles was made using Brunauer–Emmett–Teller technique for specific surface area, powder X-ray diffraction analysis and transmission electron microscopy for identification and crystallite size, X-ray photoelectron spectroscopy for surface analysis and infrared spectroscopy for distinct group identification. Following the already existing procedures and using the titanates synthesized, dye-sensitized cells of 1?cm² area were assembled and their photovoltaic parameters were evaluated under standard test conditions. The power conversion efficiencies (η %) for 40?mol % Zn²⁺, 5?mol % Zr⁴⁺ and 10?mol % Zn⁴⁺ titania were obtained to be 4.8, 4.95 and 4.9, respectively. The promising efficiency results from a greener and large-scale production of nano-titania is a step forward towards commercializing DSC technology.     

Acid dissolution methods for heavy metals determination in pine needles

Microwave digestion procedures using HNO₃, HNO₃+H₂O₂, HNO₃+HClO₄, HF mixtures and dry ashing with HF were investigated for heavy metals analysis by either inductively coupled plasma-optical emission spectroscopy (ICP-OES) or ICP-mass spectrometry (ICP-MS) in pine needles. The HF digestion procedures gave about 1.5 times higher values than a mixture of HNO₃+H₂O₂ alone. For Ti determination in needles, the HF procedure using dry ashing is thus recommended. The mean concentrations amounted to 900 mg/kg for Fe and 21.8 mg/kg for Ti in needles collected at an area polluted by a stainless steel works. Those concentrations were 10.6 and 4.3 times higher than in needles collected at an area nearby a pulp mill complex (84.5 mg/kg Fe and 5.0 mg/kg Ti).