Removal of heavy metals from aqueous solutions using activated carbon prepared from Cicer arietinum

Removal of Cu²⁺, Cd²⁺, Pb²⁺, and Zn²⁺ from aqueous solutions by activated carbon prepared from stems and seed hulls of Cicer arietinum, an agricultural solid waste, has been studied. The influence of various parameters, such as pH, contact time, adsorbent dose, and initial concentration of metal ions on removal was evaluated. The activated carbon was characterized by FT-IR spectroscopy, X-ray diffraction, and elemental analysis. Sorption isotherms were studied using Langmuir and Freundlich isotherm models. All experimental sorption data were fitted to the sorption models using nonlinear least-squares regression. The maximum adsorption capacity values for activated carbon prepared from Cicer arietinum waste for metal ions were 18 mg g^?1 (Cu²⁺), 18 mg g^?1 (Cd²⁺), 20 mg g^?1 (Pb²⁺), and 20 mg g^?1 (Zn²⁺), respectively. The Freundlich isotherm model fit was best, followed by the pseudo-second-order kinetic model. Desorption studies were carried out with dilute hydrochloric acid for quantitative recovery of the metal ions and for regeneration of the adsorbent.     

A novel polyacrylonitrile–zeolite nanocomposite to clean Cs and Sr from radioactive waste

Radioactive wastes containing Cs⁺ and Sr²⁺ are among the most dangerous environmental pollutants. Therefore, removing Cs⁺ and Sr²⁺ from environmental media is needed. Removal can be done by nanocrystalline ion exchangers. Nanocrystalline ion exchangers are studied in depth for the treatment of nuclear wastes because these exchangers have high exchange capacity and fast kinetics. However, operating the columns of these exchangers is very difficult. This issue may be overcome by the preparation and use of nanocomposites. Here, we prepared a novel polyacrylonitrile–zeolite nanocomposite for the removal of Cs⁺ and Sr²⁺ in a fixed-bed column operation. We studied the effect of influent flow rate, nanocomposite bed height and initial concentrations. Experimental data were analysed using the Thomas model and the bed-depth service time model. The results reveal that total adsorbed ion and bed capacity increased with increasing initial ions concentration and bed height; and decreased with increasing influent flow rate. The maximum bed capacity was 0.085 meq/g for Cs⁺ and 0.128 meq/g for Sr²⁺. The critical bed height (Z ₀) was 4.35 cm for Cs⁺ and 2.89 cm for Sr²⁺. These findings demonstrate that the new nanocomposite is suitable for removal of Cs⁺ and Sr²⁺.     

Cationic dye adsorption onto natural and synthetic zeolites in the presence of Cs+ and Sr2+ ions

Adsorption of diazine dye safranine O (SO) in the presence of Cs⁺ and Sr²⁺ ions was investigated onto natural and synthetic zeolites in order to predict competition of cationic organic species with their radionuclides, which are the main fission products released into the environment. Adsorption of SO was measured up to the 40th day and the surface-diffusion coefficients (D_s) were estimated by applying Nernst–Planck approximation based on a homogeneous-surface-diffusion model. The values of D_s were 10 times higher on natural zeolite than those of synthesized zeolite from fly ash (FA) under hydrothermal conditions. Similarly, distribution coefficients (K_D) were considerably higher on the clinoptilolite-type natural zeolite. The zeolitized product of FA is mainly composed of analcime and sodalite. SO adsorption on natural zeolite was not influenced by Cs⁺ and Sr²⁺ ions, but it decreased at high concentrations on synthetic zeolite. The higher influence of the Sr²⁺ ions on SO⁺ adsorption showed that they compete with each other for the same adsorption sites. These results suggested that natural zeolite cannot be used for remediation of wastewater polluted with Cs and Sr radionuclides in the presence of organic cations, whilst FA zeolite has a potential for Sr removal.     

Effects of La3+, Ce3+ on nitrogen removal in sequencing batch reactor

Batch experiments were conducted to study the short-term biological effects of rare earth ions (La³⁺, Ce³⁺) and their mixture on the nitrogen removal in a sequencing batch reactor (SBR). The data showed that higher NH₄ ⁺-N removal rate, total inorganic nitrogen removal efficiency, and denitrification efficiency were achieved at lower concentrations of rare earth elements (REEs) (<1 mg/L). In the first hour of the aeration stage of SBR, the presence of REEs increased the total inorganic nitrogen removal efficiency and NH₄ ⁺-N removal efficiency by 15.7% and 10%–15%, respectively. When the concentrations of REEs were higher than 1 mg/L, the total inorganic nitrogen removal efficiency decreased, and nitrate was found to accumulate in the effluent. When the concentrations of REEs was up to 50.0 mg/L, the total inorganic nitrogen removal efficiency was less than 30% of the control efficiency with a high level of nitrate. Lower concentrations of REEs were found to accelerate the nitrogen conversion and removal in SBR.     

Application of Zr(IV) tungstate for removal of metal ions from aqueous solutions

A heteropolyacid Zr(IV) tungstate-based cation exchanger has been synthesized. An amorphous sample, prepared at pH 1.2 and having a Na⁺ ion exchange capacity of 0.92?meq?g^?1, was selected for further studies. Its physicochemical properties were determined using Fourier transform infrared spectrometer, X-ray diffraction, thermogravimetric, and scanning electron studies. To understand the cation exchange behavior of the material, distribution coefficients (K _d) for metal ions in various solvent systems were determined. Some important binary separations of metal ions, namely Mg²⁺–Bi³⁺, Cd²⁺–Bi³⁺, Fe³⁺–Bi³⁺, Th⁴⁺–Bi³⁺, and Fe³⁺–Zn²⁺, were achieved on such columns. The practical utility of these separations was demonstrated by separating Fe³⁺ and Zn²⁺ ions quantitatively in commercial pharmaceutical formulation. The cation exchanger has been successfully applied also for the treatment of industrial wastewater and a synthetic mixture. All the results suggests that Zr(IV) tungstate has excellent potential for the removal of metals from aqueous systems using packed columns of this material.     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

In vitro toxic effects of heavy metals on fungal growth and phosphate-solubilising abilities of isolates obtained from Phragmites australis rhizosphere

In this research, we evaluated the toxic effect of metal ions on mycelial growth and phosphate-solubilising activity of soil-borne micromycetes isolated from the Phragmites australis rhizosphere using Pikovskaya-agar plates supplemented with four metal concentrations. The diameter growth rate (DGR) decreased as the metal concentration rise for all tested fungi. Trichoderma atroviride had the fastest growth rate (1.48?cm²?day^?1) and was the least susceptible to Al³⁺, Cd²⁺, Cr³⁺, Cu²⁺ and Pb²⁺ with a median effective concentration (MEC₅₀) of 12.19, 0.48, 4.51, 11.44 and 50.05?mM, respectively. Aspergillus japonicus was the most tolerant to Co²⁺, Ni²⁺ and Zn²⁺, with MEC₅₀ values of 3.36, 1.095 and 2.34?mM, respectively. Penicillium italicum was the most tolerant to Cr6⁺ (MEC₅₀?=?0.677?mM). The ability to solubilise phosphate remained, despite the decrease in the DGR, and P. italicum and Penicillium dipodomyicola had the highest Phosphate Solubilisation Indexes (PSIs) at 1.97 and 2.12, respectively. In particular, P. italicum recorded the highest PSI of all the studied isolates at 0.62?mM Cr³⁺ (PSI?=?4.74). A. japonicus and T. atroviride were the most tolerant isolates to all tested metals, which suggests that these isolates are promising candidates for further study with regard to mycoremediation and biofertilisation of metal-polluted soils.     

Isolation and characterisation of a carbofuran degrading Burkholderia sp. PCL3 from carbofuran-phytoremediated rhizosphere soil

A bacterial strain capable of degrading carbofuran as the sole carbon source was isolated from carbofuran-phytoremediated rhizosphere soil of rice. A 16S rRNA study identified the strain as Burkholderia sp. (isolate PCL3). Free cells of isolate PCL3 possessed inhibitory-type degradation kinetics with a q _max of 0.087 day^?1 and S _m of 248.76 mg·L^?1. Immobilised PCL3 on corncob and sugarcane bagasse possessed Monod-type degradation kinetics with a q _max of 0.124 and 0.098 day^?1, respectively. The optimal pH and temperature with the highest degradation rate coefficient of carbofuran were pH 7.5 and 35 °C, respectively.     

Thermodynamic and kinetic studies on Cs+- and Sr2+-exchange in natural zeolite from Akita,Japan

Thermodynamic and kinetic studies on the adsorption of Cs⁺ and Sr²⁺ by Na-exchanged clinoptilolite-rich zeolite rock from Akita (Northern Japan) were performed for the purpose of nuclear waste treatment. The thermodynamic parameters such as selectivity coefficient, thermodynamic equilibrium constant, and standard free energy of exchange were evaluated. These values indicated that the selectivity order was determined as Cs⁺ > Na⁺ > Sr²⁺. In order to discuss the adsorption mechanism of Cs⁺ and Sr²⁺ onto Na-exchanged clinoptilolite, the effective diffusion coefficients were calculated and two kinetic models, pseudo-first-order and pseudo-second-order kinetic model, were tested. For all systems studied, chemisorption seems significant in the rate-controlling step, and the pseudo-second-order kinetic model provided the best correlation of the experimental data.     

Toxic effects of dietary of Al3+ ions in tilapias (Oreochromis niloticus) and protective effect of Zn2+ ion

The lethal effects of aluminum ion (Al³⁺) in tilapia (Oreochromis niloticus) raised in concrete tanks were investigated. Tilapias were fed daily with commercial feed enriched with known concentrations of Al³⁺ and analyzed by differential pulse anodic stripping voltammetry (DPASV). The concentrations of Al³⁺ in feces, water, muscle tissue, viscera, and heads were determined every 3 months for a period of 365 days. The Tilapia head was the most affected tissue by Al³⁺. In general, Al³⁺ bioaccumulation reached the lethal dose (LD₅₀) after 335 days of experiment as follows: 34.9?mg?kg^?1 (muscle tissue), 88.2?mg?kg^?1 (viscera), and 126.9?mg?kg^?1 (head without gills). After determining Cu²⁺, Zn²⁺, and Ca²⁺ by absorption spectrometry, a decrease in the Ca²⁺ concentration was noted in the head during the experimental period. These observations were associated with the occurrence of a decalcification in the bone tissue in the presence of Al³⁺. In contrast, it was found that Zn²⁺ ions may act as a protective agent against Al³⁺-induced contamination.     

Synthesis and characterization of an ion exchanger based on tamarind kernel powder and its application for removal of some metal ions from industrial effluents

A resin synthesized from tamarind kernel powder possesses high selectivity for metal ions. Distribution coefficients for some metal ions has been determined by the batch method. The influence of pH on ion exchange capacity and K _d value of metal ions were studied. The resin has been characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, chemical composition and ion exchange capacity (IEC). The selectivity order is Pb²⁺?>?Cu²⁺?>?Fe²⁺?>?Zn²⁺?>?Ni²⁺. Removal of metal ions from the aqueous solution and from effluents of a steel mill has been studied.     

Fast and complete removal of the 5-fluorouracil drug from water by electro-Fenton oxidation

Cytostatic drugs are a troublesome class of emerging pollutants in water owing to their potential effects on DNA. Here we studied the removal of 5-fluorouracil from water using the electro-Fenton process. Galvanostatic electrolyses were performed with an undivided laboratory-scale cell equipped with a boron-doped diamond anode and a carbon felt cathode. Results show that the fastest degradation and almost complete mineralization was obtained at a Fe²⁺ catalyst concentration of 0.2 mM. The absolute rate constant for oxidation of 5-fluorouracil by hydroxyl radicals was 1.52 × 10⁹ M^?1 s^?1. Oxalic and acetic acids were initially formed as main short-chain aliphatic by-products, then were completely degraded. After 6 h the final solution mainly contained inorganic ions (NH₄ ⁺, NO₃ ^? and F^?) and less than 10% of residual organic carbon. Hence, electro-Fenton constitutes an interesting alternative to degrade biorefractory drugs.     

Geochemistry and quality of groundwater of the Yarmouk basin aquifer,north Jordan

Quality of groundwater in the Yarmouk basin, Jordan has been assessed through the study of hydrogeochemical characteristics and the water chemistry as it is considered the main source for drinking and agriculture activities in the region. The results of the relationship between Ca²⁺ + Mg²⁺ versus HCO₃^? + CO₃^2?, Ca²⁺ + Mg²⁺ versus total cations, Na⁺ + K⁺ versus total cations, Cl^? + SO₄^2? versus Na⁺ + K⁺, Na⁺ versus Cl^?, Na⁺ versus HCO₃^? + CO₃^2?, Na⁺ versus Ca²⁺, and Na⁺: Cl^? versus EC describe the mineral dissolution mechanism through the strong relationship between water with rocks in alkaline conditions with the release of Ca²⁺, Mg²⁺, Na⁺, K⁺, HCO₃^?, CO₃^2?, SO₄^2?, and F^? ions in the groundwater for enrichment. Furthermore, evaporation processes, groundwater depletion, and ion exchange contribute to the increased concentration of Na⁺ and Cl^? ions in groundwater. Anthropogenic sources are one of the main reasons for contamination of groundwater in the study area and for increasing the concentration of Mg²⁺, Na⁺, Cl^?, SO₄^2?, and NO₃^? ions. Results show the quality of groundwater in the study area is categorized as follows: HCO₃^? + CO₃^2? > Cl^? > SO₄^2? > NO₃^? > F^? and Na⁺ > Ca²⁺ > Mg²⁺ > K⁺. In conclusion, the results of TDS, TH, and chemical composition showed that 26% of the groundwater samples were unsuitable for drinking. About 28% of groundwater samples in the study area have a high concentration of Mg²⁺, Na⁺, and NO₃^? above the acceptable limit. Also, based on high SAR, 10% of the groundwater samples were not suitable for irrigation purposes.     

The pollution characteristics of PM<Subscript>2.5</Subscript> and correlation analysis with meteorological parameters in Xinxiang during the Shanghai Cooperation Organization Prime Ministers’ Meeting

The pollution characteristics of PM_2.5 and correlation analysis with meteorological parameters in Xinxiang during the Shanghai Cooperation Organization Prime Ministers’ Meeting were investigated. During the whole meeting, nine PM_2.5 samples were collected at a suburban site of Xinxiang, and the average concentration of PM_2.5 was 122.28 μg m^?3. NO₃ ^?, NH₄ ⁺, SO₄ ^2? accounted for 56.8% of the total water-soluble ions. In addition, with an exception of Cl^?, all of water-soluble ions decreased during the meeting. Total concentrations of crustal elements ranged from 6.53 to 185.86 μg m^?3, with an average concentration of 52.51 μg m^?3, which accounted for 82.5% of total elements. The concentrations of organic carbon and elemental carbon were 7.71 and 1.52 μg m^?3, respectively, lower than those before and after the meeting. It is indicated that during the meeting, limiting motor vehicles is to reduce exhaust emissions, delay heating is to reduce the fossil fuel combustion, and other measures are to reduce the concentration of PM_2.5. The directly dispersing by mixing layerheight increase and the indirectly reducing the formation of secondary aerosol by low relative humidity, andthese are the only two key removing mechanisms of PM_2.5 in Xinxiang during the meeting.     

Synthetischer Crandallit

Crandallite (Ca,Sr) Al₃ (PO₄)₂ (OH)₅ · H₂O crystallizes in the alunitecrystal lattice. Because of its open structure, the cations Ca²⁺, Sr²⁺, and Al³⁺ can be replaced by various elements depending on their diadochial properties; the element entering into the crystal network thus becomes immobilized. Artificial amorphous crandallite has been shown to eliminate the heavy metal ions: Pb²⁺>>Cu²⁺>Hg²⁺>>Cd²⁺ from contamined water in the presence of lateritic phosphates. Pb²⁺ could be removed nearly quantitatively in all cases.     

Experimental determination of Cd2+ adsorption mechanism on low-cost biological waste

Carbonate shells have an astonishing ability in the removal of Cd²⁺ in a short time period with emphasis on being a low cost adsorbent. In the present study, the sorption capacity of carbonate shells was studied for Cd²⁺ in batch experiments. The influence of different carbonate shell sizes and physico-chemical factors were evaluated and the results were analyzed for its correlation matrices by using Predictive Analytics Software (PASW). The mineralogy state of aqueous solution regarding the saturation index was simulated using PHREEQC to identify the Cd²⁺ uptake mechanism. The Cd uptake rates were calculated as well as Ca²⁺, HCO ₃ ^? concentration, pH, ambient humidity and temperature were measured. Cd²⁺ removal of 91.52% was achieved after 5 h adsorption. The adsorption efficiencies were significantly influenced by pH as they increased with the increase of pH from acidic solution (5.50±0.02) to slightly alkaline (7.60±0.05). In addition, the mineralogy state of aqueous solution calculated from PHREEQC confirmed that the increment of Ca²⁺ and HCO ₃ ^? concentrations in solution was attributed to the dissolution of carbonate shells. Moreover, the ion exchange adsorption mechanism of Cd²⁺ toward Ca²⁺ was identified as the process involved in Cd²⁺ uptake.     

Removal of Remazol Brilliant Violet-5R dye using periwinkle shells

The purpose of this research is to obtain optimal processing conditions for the adsorption of Remazol Brilliant Violet-5R (RBV-5R) dye onto activated carbon prepared from periwinkle shells (PSAC) by chemical activation with KOH using response surface methodology. Central composite design (CCD) was used to determine the effects of three preparation variables; CO₂ activation temperature, CO₂ activation time and KOH:char impregnation ratio (IR) on two responses; percentage RBV-5R dye removal and PSAC yield. Based on the CCD, two quadratic models were developed for percentage RBV-5R dye removal and PSAC yield, respectively. The most influential factor on each experimental design response was identified from the analysis of variance (ANOVA). The optimum conditions for the adsorption of RBV-5R dye onto PSAC were CO₂ activation temperature of 811 °C, CO₂ activation time of 1.70 h and IR of 3.0, resulting in 81.28% RBV-5R dye removal and 28.18% PSAC yield. PSAC prepared under optimum conditions was mesoporous with a Brunauer–Emmett–Teller surface area of 1894 m²·g^?1, total pore volume of 1.107 cm³·g^?1 and average pore diameter of 2.32 nm. The surface morphology and functional groups of the activated carbon were respectively determined from the scanning electron microscopy and Fourier transform infrared analysis.     

Characteristics of mass distributions of aerosol particle and its inorganic water-soluble ions in summer over a suburb farmland in Beijing

Agricultural activity is one of the most important sources of aerosol particles. To understand the mass distribution and sources of aerosol particles and their inorganic water-soluble ions in a suburb farmland of Beijing, particle samples were collected using a microorifice uniform deposit impactor (MOUDI) in the summer of 2004 in a suburb vegetable field. The distribution of the particles and their inorganic water-soluble ions in the diameter range of 0.18–18 μm were measured. The dominant fine particle ions were SO₄ ^2?, NO₃ ^?, and NH₄ ⁺. The association of day-to-day variation of the concentration of these ions with temperature, humidity, and solar radiation suggested that they are formed by the reaction of NH₃ released from the vegetable field with the acid species produced from photochemical reactions. Fine particle K⁺ is likely from vegetation emission and biomass burning. Coarse particles like Ca²⁺, Mg²⁺, NO₃ ^?, and SO₄ ^2? are suggested to come from the mechanical process by which the soil particle entered the atmosphere, and from the reaction of the acid species at the surface of the soil particle. The results show that fertilizer and soil are important factors determining the aerosol particle over agricultural fields, and vegetable fields in suburban Beijing contribute significantly to the aerosol particle.     

Suitability of various chemically prepared activated carbons for the removal of copper(II) ions

Studies on the suitability of various chemically prepared activated carbons (CPACs) like straw carbon (SC), sawdust carbon (SDC), dates nut carbon (DNC) and commercial activated carbon (CAC) for the removal of copper(II) ions by adsorption from simulated wastewater have been carried out under batch mode at 30?±?1°C and the results are compared. The percentage removal of Cu(II) ions increased with a decrease in initial concentration, particle size and added electrolytes (ionic strength) and increased with an increase in contact time, dose of adsorbent and initial pH of the solution. The adsorption data were fitted with the Langmuir isotherm. The applicability of the first order kinetic equation viz. Lagergren equation was tested by correlation analysis. The adsorption process is concluded to be a spontaneous, first order reaction, occurring with increased randomness at the solid–liquid interface. Studies on the desorption of Cu²⁺-loaded activated carbons (ACs) were carried out with nitric acid (0.2–1?N). The possibility of reuse of the regenerated ACs in cycle (in cue-one after another) was tested. SC was found to be a suitable adsorbent alternative to CAC among CPACs for the removal of metal ions, in general, and Cu²⁺ ions, in particular.     

Arsenic (V) removal from groundwater by GE-HL nanofiltration membrane: effects of arsenic concentration, pH, and co-existing ions

A laboratory-scale investigation was performed to study arsenic (As (V)) removal by negatively charged GE-HL nanofiltration (NF) membrane in simulated drinking water. Effects of As (V) concentration (0–200 μg·L^?1), pH, and co-ions and counter-ions were investigated. The NF membrane presented good stability, and the rejection rates exceeded 90%. The rejection rates of As (V) decreased with the increase of As (V) concentration, while it increased with the increase of pH (reached 96% at pH 6.75). Moreover, a negative relationship was observed between the co-existing ions of Cl^?, Na⁺, SO ₄ ^2? , and Ca²⁺ and the removal of As (V), in which bivalent ions presented more significant effects than monovalent ions.