电厂建设运行中的水土流失预测与水土保持设计

在燃煤电厂建设运行的同时,将引起一系列的水土流失问题.以四川国电金堂电厂二期扩建工程为例,简要说明项目区水土流失预测的内容和方法,并在其基础上对可能产生的水土流失和危害进行了分析,同时介绍了建设期和运行期采取的综合防治措施,为类似工程的水土保持提供借鉴.     

Photo-oxidation and Photo-toxicity of Crude and Refined Oils

The fate and effects of an oil spill are effected by solar radiation through the action of photo-oxidation and photo-toxicity. Photo-oxidation, an important process in the weathering of oil, produces a variety of oxidized compounds, including aliphatic and aromatic ketones, aldehydes, carboxylic acids, fatty acids, esters, epoxides, sulfoxides, sulfones, phenols, anhydrides, quinones and aliphatic and aromatic alcohols. Some of these compounds contribute to the marine biota toxicity observed after an oil spill. Photo-toxicity occurs when uptake of certain petroleum compounds, e.g. certain polycyclic aromatic hydrocarbons and benzothiophenes, is followed by solar exposure which results in much greater toxicity than after dark uptake. The mechanism of PAH photo-toxicity includes absorbance of solar radiation by the PAH which produces a free radical and this free radical in turn reacts with oxygen to produce reactive oxygen species that can damage DNA and other cellular macromolecules. While most studies on photo-toxicity have been carried out in the laboratory, there are studies showing that water from an oil spill is photo-toxic to bivalve embryos for at least a few days after the spill. Other studies have found that oil contaminated sediments are photo-toxic to several marine invertebrates. More studies are required to determine if marine fauna at an oil spill site are effected by the action of photo-toxicity and photo-oxidation.     

Fate and effect of linuron and metribuzin on the co-composting of green waste and sewage sludge

The fate and effect of the herbicides linuron and metribuzin on the co-composting of sewage sludge and green waste were addressed in this work. The experiments were conducted in metal cubic containers of 1.0 m³ volume simulating a windrow composting system. A mixture of sludge and green waste was prepared at a ratio of 1:5 v/v. The mixture was split in four equal parts and the two herbicides were added, using a pressure sprayer, as sole or mixed pollutant in each of the three mixtures. The forth mixture was composted without any addition of herbicide, to serve as control. Temperature, physicochemical characteristics, herbicide concentration, carbon dioxide emission, methane emission and microbiological parameters were measured either daily or every time the mixtures were turned, for a period of 80 days. Both herbicides’ concentration decreased significantly resulting in removal efficiencies of 99.1–99.7% and 95.8–96.0% for linuron and metribuzin, respectively. Incubation of microbiologically inactive mixtures at a temperature schedule following the spontaneous temperature evolution in the composters resulted in very little (1–11%) decomposition for both herbicides. Comparison of the variation of physicochemical parameters and microbial populations during composting indicated that both herbicides did not affect the composting process.     

Preparation and Characterization of Xylan Derivatives and Their Blends

Although hemicellulose is found widely in nature, it is currently under-utilized as a raw material for commercial applications. It would be desirable to find new uses for hemicellulose in order to add value to this agro-based material. A common type of hemicellulose is xylan, which is found in a number of wood species and in cotton. In this work we prepared cationic and anionic xylan derivatives and characterized them by ¹³C NMR, FT-IR, size exclusion chromatography (SEC), thermal analysis, and rheology. In particular, the ¹³C NMR spectra of carboxymethyl xylan (CMX) and quaternary ammonium-adducted xylan (QAX) were fully assigned with the help of samples with different degrees of substitution. SEC indicated that the beechwood xylan showed a bimodal molecular weight distribution, but with derivatization the distribution tended to become unimodal. Thermal analysis and rheology studies did not uncover any surprises; the solution of xylan and its derivatives exhibited mostly Newtonian behavior. The blends of CMX and QAX produced a precipitate at almost all ratios, indicating the formation of a polyelectrolyte complex. When cationic and anionic xylan samples were added together to paper, the paper dry strength increased. Thus, the combination of cationic/anionic xylan may be of interest in selected applications.     

Pyrolysis of virgin and waste polypropylene and its mixtures with waste polyethylene and polystyrene

A comparison of waste and virgin polypropylene (PP) plastics under slow pyrolysis conditions is presented. Moreover, mixtures of waste PP with wastes of polyethylene (PE) and polystyrene (PS) were pyrolyzed under the same operating conditions. Not only the impact of waste on degradation products but also impacts of the variations in the mixing ratio were investigated. The thermogravimetric weight loss curves and their derivatives of virgin and waste PP showed differences due to the impurities which are dirt and food residues. The liquid yield distribution concerning the aliphatic, mono-aromatic and poly-aromatic compounds varies as the ratio of PP waste increases in the waste plastic mixtures. In addition to this, the alkene/alkane ratio of gas products shows variations depending on the mixing ratio of wastes.     

Novel and innovative pyrolysis and gasification technologies for energy efficient and environmentally sound MSW disposal

Within the context of European Union (EU) energy policy and sustainibility in waste management, recent EU regulations demand energy efficient and environmentally sound disposal methods of Municipal Solid Waste (MSW). Currently, landfill with its many drawbacks is the preferred option in the EU and many other industrialised countries. Within the waste management hierarchy thermal disposal especially incineration is a viable and proven alternative. But, the dominating method, mass-burn grate incineration has drawbacks as well particularly hazardous emissions and harmful process residues. In recent years, pyrolysis and gasification technologies have emerged to address these issues and improve the energy output. To keep the many players in the field comprehensively informed and up-to-date, novel and innovative technology approaches emphasising European developments are reviewed.     

Laboratory Experiments and Estimation of Cumulative Infiltration and Sorptivity

Soil water cumulative infiltration affects the environment by controlling the irrigation rate and consequently the water and pollutants movement through the ground. In order to study the cumulative infiltration in a sandy soil sample, experiments were performed in the laboratory. The sample was placed uniformly in a transparent column with an inner diameter of 6 cm. A constant head boundary condition of a 2 mm height was applied on the surface of the sample and the cumulative volume of the incoming water was measured. Soil moisture at four locations of the column was measured, by using the TDR method in order to obtain the moisture profiles. By comparing the values of the infiltrated water volumes with those calculated by the integration of the moisture profiles, a good agreement was found out. Also the Parlange theoretical model fitted very well with the infiltration experimental points.     

TEMPO-Mediated Oxidation of Norway Spruce and Eucalyptus Pulps: Preparation and Characterization of Nanofibers and Nanofiber Dispersions

This study deals with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-mediated oxidation of cellulose. Softwood and hardwood pulp fibers were suspended in water and oxidized to various extents at pH 10 and 22 °C using sodium hypochlorite in the presence of TEMPO radical and sodium bromide. This reaction system is known to be the most efficient one for the introduction of both surface carboxyl and aldehyde groups. Important relationships between formation of these functional groups and the fibrillation yield, light transmittance of the water dispersions and degree of polymerization of the oxidized softwood and hardwood pulps were established in the present study. A birefringence test confirmed the presence of nanofibers which according to atomic force microscopy analyses had diameters in the 1.6–3.8 nm range.     

Synthesis and Characterization of Polyols and Polyurethane Foams from PET Waste and Crude Glycerol

In this study, polyethylene terephthalate (PET) waste from post-consumer soft-drink bottles and crude glycerol from the biodiesel industry were used for the preparation of polyols and polyurethane foams. PET waste was firstly depolymerized by the glycolysis of diethylene glycol. The glycolyzed PET oligomers were then reacted with crude glycerol at different weight ratios to produce polyols via a series of reactions, such as esterification, transesterification, condensation, and polycondensation. The polyols were characterized by titration, viscometry, gel permeation chromatography (GPC), and differential scanning calorimetry. Subsequently, polyurethane (PU) foams were made via the reaction between the produced polyols and polymeric methylene-4,4′-diphenyl diisocyanate and were characterized by mechanical testing, scanning electron microscopy, and thermogravimetric analysis. Polyols from crude glycerol and their PU foams were also prepared to compare properties with those of polyols and PU foams from PET and crude glycerol. The influence of aromatic segments existing in glycolyzed PET and glycerol content on the properties of the polyols and PU foams was investigated. It was found that aromatic segments of polyols from glycolyzed PET helped increase their molecular weights and improve thermal stability of PU foams, while high glycerol content in polyols increased the hydroxyl number of polyols and the density and compressive strength of PU foams.     

磷对环境的污染及防治对策

我国水体富营养化严重，其主要控制因子是磷。在分析磷污染的污染状况，污染源的基础上，介绍了防治对策，采用低磷循环冷却水处理剂，减少磷排放，是防止工业磷污染的有效方法。     

Electrical and electronic equipment consumption pattern and e-waste disposal behaviour of individuals and households in India

Journal of Material Cycles and Waste Management - Despite electronic waste (e-waste) rules in force, there is still a huge gap in awareness among communities about the handling of discarded...     

Legal and technical defensibility of data and the Triad approach

The Triad approach was developed primarily to limit decision uncertainty during cleanups at hazardous waste sites. The fundamental principles of the Triad approach include development of a site characterization model and use of emerging technologies, which can provide data at a higher density than could be affordably collected using traditional data collection methodologies, to refine the model in essentially real time. New data formats are used collaboratively with data in traditional formats to iteratively pin down the relative concentration, nature, and extent of contaminants, thus minimizing decision uncertainties. This article examines the potential admissibility as evidence in legal proceedings of data collected by technologies designed to improve the density of information that are commonly used during the course of Triad‐type projects. The article explains that such criteria may vary depending on the purpose for which the evidence is to be used (e.g., as direct evidence to prove site conditions or as support for the testimony of an expert witness) and the court in which the legal proceeding would take place (e.g., federal court or state court). Admissibility in federal courts of data both as direct evidence and as support for expert witness testimony is covered. © 2005 Wiley Periodicals, Inc.     

Engineered nanoparticles in wastewater and wastewater sludge – Evidence and impacts

Nanotechnology has widespread application in agricultural, environmental and industrial sectors ranging from fabrication of molecular assemblies to microbial array chips. Despite the booming application of nanotechnology, there have been serious implications which are coming into light in the recent years within different environmental compartments, namely air, water and soil and its likely impact on the human health. Health and environmental effects of common metals and materials are well-known, however, when the metals and materials take the form of nanoparticles – consequential hazards based on shape and size are yet to be explored. The nanoparticles released from different nanomaterials used in our household and industrial commodities find their way through waste disposal routes into the wastewater treatment facilities and end up in wastewater sludge. Further escape of these nanoparticles into the effluent will contaminate the aquatic and soil environment. Hence, an understanding of the presence, behavior and impact of these nanoparticles in wastewater and wastewater sludge is necessary and timely. Despite the lack of sufficient literature, the present review attempts to link various compartmentalization aspects of the nanoparticles, their physical properties and toxicity in wastewater and wastewater sludge through simile drawn from other environmental streams.     

LCA and economic evaluation of landfill leachate and gas technologies

Landfills receiving a mix of waste, including organics, have developed dramatically over the last 3-4 decades; from open dumps to engineered facilities with extensive controls on leachate and gas. The conventional municipal landfill will in most climates produce a highly contaminated leachate and a significant amount of landfill gas. Leachate controls may include bottom liners and leachate collection systems as well as leachate treatment prior to discharge to surface water. Gas controls may include oxidizing top covers, gas collection systems with flares or gas utilization systems for production of electricity and heat.The importance of leachate and gas control measures in reducing the overall environmental impact from a conventional landfill was assessed by life-cycle-assessment (LCA). The direct cost for the measures were also estimated providing a basis for assessing which measures are the most cost-effective in reducing the impact from a conventional landfill. This was done by modeling landfills ranging from a simple open dump to highly engineered conventional landfills with energy recovery in form of heat or electricity. The modeling was done in the waste LCA model EASEWASTE. The results showed drastic improvements for most impact categories. Global warming went from an impact of 0.1 person equivalent (PE) for the dump to −0.05 PE for the best design. Similar improvements were found for photochemical ozone formation (0.02 PE to 0.002 PE) and stratospheric ozone formation (0.04 PE to 0.001 PE).For the toxic and spoiled groundwater impact categories the trend is not as clear. The reason for this was that the load to the environment shifted as more technologies were used. For the dump landfill the main impacts were impacts for spoiled groundwater due to lack of leachate collection, 2.3 PE down to 0.4 PE when leachate is collected. However, at the same time, leachate collection causes a slight increase in eco-toxicity and human toxicity via water (0.007E to 0.013PE and 0.002 to 0.003 PE respectively). The reason for this is that even if the leachate is treated, slight amounts of contaminants are released through emissions of treated wastewater to surface waters.The largest environmental improvement with regard to the direct cost of the landfill was the capping and leachate treatment system. The capping, though very cheap to establish, gave a huge benefit in lowered impacts, the leachate collection system though expensive gave large benefits as well. The other gas measures were found to give further improvements, for a minor increase in cost.     

Nitrous oxide emission from some English and Welsh rivers and estuaries

Nutrient and N₂O concentrations in the water columns were measured seasonally over a full salinity range in the nutrified rivers Colne, Stour, Orwell, Deben, Trent, Ouse and Humber and their estuaries on the east coast of England between August 2001 and May 2002, and in the oligotrophic rivers Conwy, Dovey and Mawddach in North and West Wales between August 2002 and May 2003. Nutrient and N₂O concentrations in the nutrified English rivers and estuaries were much higher than those in the Welsh rivers. N₂O concentrations and % saturation in the estuaries were significantly correlated with nitrate, nitrite and ammonium concentrations in the water. The strongest correlation was with nitrite (r² = 0.56, p < 0.01), suggesting that nitrite was the most significant factor among the different nutrients in regulating N₂O concentration in the estuaries. N₂O concentrations in the English rivers and estuaries were supersaturated throughout the year with annual averages from 186.9 to 992.9%, indicating that these rivers and estuaries were sources of atmospheric N₂O, whereas in the Welsh rivers N₂O concentrations were much lower with annual averages from 113.6 to 137.4% saturation. Although the estuarine area in the Colne was almost the same as that in the Conwy, the annual N₂O emission from the Colne was much higher (937498 mol N yr^–1) than in the Conwy (23020 mol N yr^–1). On the east coast, riverine emissions of N₂O were only 0.5–12.5% of the total emission from rivers and estuaries. Thus rivers were negligible, but estuaries were significant contributors to the UK N₂O inventory.     

电除尘器及其电离荷电机制的研究新进展

详细介绍了电除尘技术研究现状、现存问题及其研究趋势.目前电除尘技术的理论尚不完备,属于经验工程的学科,电除尘器的技术性能优劣取决于设计命中率.为此,论述烟尘荷电凝聚机制并研究电离放电通道中的带电粒子复合问题及其输运特性等,以便解决除尘电场中的电离占空比、输运项甚低等问题;研究了烟尘荷电、凝聚的物理过程,以便进一步提高电除尘器的性能.     

Concurrent and Complete Anaerobic Reduction and Microaerophilic Degradation of Mono‐, Di‐, and Trichlorobenzenes

Bio‐Trap^®–based in situ microcosm studies were conducted to evaluate EHC‐M^® stimulated degradation of mono‐, di‐, and trichlorobenzenes in anaerobic groundwater at a site in Michigan. The data show that the EHC‐M^® amendment stimulated an overall increase in microbial activity and a shift in the microbial community structure, indicating more reduced conditions. Stable isotope probing with ¹³C₆‐chlorobenzene demonstrated attenuation of chlorobenzene and subsequent separation and characterization of the ¹²C‐ and ¹³C‐deoxyribonucleic acid (DNA) fractions were used to identify the attenuating microbes. These data clearly show the participation of an obligate aerobe in the chlorobenzene biodegradation process. Decreases in concentrations of trichlorobenzenes were also observed in comparison to a control. Due to the thermodynamically favorable reducing conditions stimulated by EHC‐M^®, the mechanism of degradation of the trichlorobenzenes is presumed to be reductive dehalogenation. However, on the strength of the DNA‐based analysis of microbial community structure, concurrent microaerophilic degradation of chlorobenzene or its metabolites was definitively demonstrated and cannot be ruled out for the other chlorobenzenes. © 2013 Wiley Periodicals, Inc.     

Nitrous oxide emission from some English and Welsh rivers and estuaries

Nutrient and N₂O concentrations in the water columns were measured seasonally over a full salinity range in the nutrified rivers Colne, Stour, Orwell, Deben, Trent, Ouse and Humber and their estuaries on the east coast of England between August 2001 and May 2002, and in the oligotrophic rivers Conwy, Dovey and Mawddach in North and West Wales between August 2002 and May 2003. Nutrient and N₂O concentrations in the nutrified English rivers and estuaries were much higher than those in the Welsh rivers. N₂O concentrations and % saturation in the estuaries were significantly correlated with nitrate, nitrite and ammonium concentrations in the water. The strongest correlation was with nitrite (r ² = 0.56, p < 0.01), suggesting that nitrite was the most significant factor among the different nutrients in regulating N₂O concentration in the estuaries. N₂O concentrations in the English rivers and estuaries were supersaturated throughout the year with annual averages from 186.9 to 992.9%, indicating that these rivers and estuaries were sources of atmospheric N₂O, whereas in the Welsh rivers N₂O concentrations were much lower with annual averages from 113.6 to 137.4% saturation. Although the estuarine area in the Colne was almost the same as that in the Conwy, the annual N₂O emission from the Colne was much higher (937498 mol N yr^?1) than in the Conwy (23020 mol N yr^?1). On the east coast, riverine emissions of N₂O were only 0.5–12.5% of the total emission from rivers and estuaries. Thus rivers were negligible, but estuaries were significant contributors to the UK N₂O inventory.     

A Comparison Between Corrosion Rates and Runoff Rates from New and Aged Copper and Zinc as Roofing Material

Recently there has been anincreased environmental concern in severalcountries in Europe, in particular in Sweden andin the Netherlands regarding the amount of copperand zinc that is released from building materialsinto society. Due to lack of runoff data, thelegislators have so far used corrosion ratesmeasured during the last 20 years to calculatequantities of metal released from buildingsassuming that the quantity of metal corrosionequals the quantity of metal runoff. Withdecreasing levels of environmental pollutantsduring the last decade in Europe, it is importantto determine more recent and hence morerepresentative corrosion and runoff rates to beused in the calculations. For this reason a field exposure program was implemented during 48 weeks in an urbanatmosphere in Sweden determining corrosion andrunoff rates for copper and zinc of differentage. New copper exposed for 48 weeks in the urbanatmosphere shows a corrosion rate of 6.7gm^-2y^-1 and an almost constant runoff rate of1.3 gm^-2y^-1 during the period. Therunoff rate is significantly lower than thecorrosion rate and represents only a fraction(20%) of the total amount of corroded metalduring this period. Zinc shows a graduallydecreasing corrosion rate with time being 5.0gm^-2y^-1 after 48 weeks of exposure. Therunoff rate is relatively stable with an averagerate of 3.1 gm^-2y^-1 during the sameperiod. This value represents 60% of the totalamount of corroded zinc. The effect of panel age has been investigatedin parallel field and laboratory studies. Theresults show that naturally aged copper exhibitssomewhat higher average runoff rates (2 gm^-2y^-1) than new copper, probably due to acombined effect of storage and weatherconditions. No significant difference in runoffrate can be found between new and naturally agedzinc. The field and laboratory investigationsshow that precipitation rate and amount influence the magnitude of the runoff rate forboth copper and zinc.