共查询到18条相似文献,搜索用时 218 毫秒
1.
2.
本文选用超硬铝Lc9,对径向叶片的等温挤压成形工艺进行试验研究。文中给出了材料预处理和等温挤压成形的温度和速度等工艺条件;分析了径问叶片等温挤压的成形过程及该工艺对成形件强度的影响;论述了控制流动性和充填性的材料、加工及模具等主要因素。试验研究结果表明,等温挤压成形工艺对于超硬铝材料复杂形状零件的塑性成形具有实际意义。 相似文献
3.
重庆大学王孝培教授和他的弟子们研究管材翻卷成形工艺已多年。近来在内翻卷成形技术方面又有了新的突破。据了解,国外在六十年代后期才有人涉猎研究管材的翻卷成形,但有关信息资料较少。国内从八十年代中期有院校研究翻卷成形工艺,但都限于外翻成形。在王孝培教授的指导之下,他的研究生代兵首次对管材的内翻卷成形进行了较为系统深入的研究,建立了相当完整的管材内翻卷成形理论,内容涉及管材内翻卷成形的具体变形过程以及管材材质、几何尺寸、润滑材料、模具形状对变形过程和变形力大小的影响,还确定了影响管材内翻卷失稳的具体因素。研究生代兵的论文经过严格推导,得出了考虑材料、模具及其它有关工艺参数影响的内翻卷成形过程的微分方 相似文献
4.
5.
6.
7.
8.
9.
本文叙述了大口径薄壁较长紫铜管强力旋压成形的试验过程。通过可旋性、主要工艺参数,以及不同工艺条件对工件尺寸精度影响等试验,确定了较为合理的工艺参数,旋出了合格的紫铜管材。 相似文献
10.
11.
12.
Yoshihiro Sagisaka Tamotsu Nakamura Kunio Hayakawa Itaru Ishibashi 《Journal of Manufacturing Processes》2013,15(1):96-101
It is required to replace the aluminum fluoride coating, which is a popular lubricant for aluminum alloy cold forging in Japan, with environmentally friendly lubricants, because the aluminum fluoride coating has high environmental risks and needs much expense. Evaluations of lubrication performance are necessary before lubricant replacement. The authors proposed new friction test based on combined forward spline-backward can extrusion. It can realize large surface expansion, which is a characteristic of aluminum cold forging. In the present paper, a double-layer-type environmentally friendly solid lubricant film and the aluminum fluoride coating were applied to a precipitation hardened aluminum alloy. The lubrication performance was evaluated by the friction test. The double-layer-type lubricant showed superior performance enough for the replacement. The effect of surface treatment applied to workpiece on the lubrication performance was also investigated. The surface asperity generated by a wet-blasting showed high pickup resistance and low friction. 相似文献
13.
14.
15.
16.
此文介绍了一种求解轴对称塑性成形问题的新方法——简化滑移线法,并得到了轴对称杯形件反挤压变形力的简化滑移线解.计算结果表明,简化滑移线解高于限解,更接近真实载荷,是求解轴对称塑性成形问题的一种简单而实用的新方法. 相似文献
17.
应用上限法建立了由矩形毛坯正挤压矩形截面工件的等挤压比流动模型 ,推导出了三次多项式表示的流线方程 ,给出了变形区的动可容速度场、应变速率场及上限功率的表达式 ,获得了挤压力的上限数值解 ;分析了变形程度、工件截面形状等参数对挤压力的影响 ,并获得了相对挤压应力与截面形状系数之间的近似关系式。研究证明采用流线速度场进行上限分析比其他方法更符合实际情况 ,根据流线设计的凹模优于常规凹模 ,如平底模。 相似文献