Sulfate and glutathione enhanced arsenic accumulation by arsenic hyperaccumulator Pteris vittata L.

This experiment examined the effects of sulfate (S) and reduced glutathione (GSH) on arsenic uptake by arsenic hyperaccumulator Pteris vittata after exposing to arsenate (0, 15 or 30 mg As L⁻¹) with sulfate (6.4, 12.8 or 25.6 mg S L⁻¹) or GSH (0, 0.4 or 0.8 mM) for 2-wk. Total arsenic, S and GSH concentrations in plant biomass and arsenic speciation in the growth media and plant biomass were determined. While both S (18-85%) and GSH (77-89%) significantly increased arsenic uptake in P. vittata, GSH also increased arsenic translocation by 61-85% at 0.4 mM (p < 0.05). Sulfate and GSH did not impact plant biomass or arsenic speciation in the media and biomass. The S-induced arsenic accumulation by P. vittata was partially attributed to increased plant GSH (21-31%), an important non-enzymatic antioxidant countering oxidative stress. This experiment demonstrated that S and GSH can effectively enhance arsenic uptake and translocation by P. vittata.     

Sorption behavior of bensulfuron-methyl on andisols and ultisols volcanic ash-derived soils: Contribution of humic fractions and mineral-organic complexes

Bensulfuron-methyl sorption was studied in Andisol and Ultisol soils in view of their characteristic physical and chemical properties, presenting acidic pH and variable charge. Humic and fulvic acids (HA and FA) and humin (HUM) contributions were established. Sorption was studied by using two synthetic sorbents, an aluminum-silicate with iron oxide coverage and the same sorbent coated with humic acid. Freundlich model described Bensulfuron-methyl behavior in all sorbents (R² 0.969-0.998). K_f for soils (8.3-20.7 μg^1−1/n mL^1/n g⁻¹) were higher than those reported in the literature. Organic matter, halloysite or kaolinite, and specific surface area contributed to the global process. The highest K_f for HA, FA and HUM were 539.5, 82.9, and 98.7 μg^1−1/n mL^1/n g⁻¹. Model sorbents described the participation of variable charge materials with high adsorption capacity. The constant capacitance model was used to assess effects of Bensulfuron-methyl adsorption on the distribution of SOH, SOH₂⁺ and SO⁻ sites of sorbents.     

Phytotoxicity of silver nanoparticles to Lemna minor L

The use of silver nanoparticles (AgNPs) in commercial products has increased significantly in recent years. Although there has been some attempt to determine the toxic effects of AgNPs, there is little information on aquatic plants which have a vital role in ecosystems. This study reports the use of Lemna minor L. clone St to investigate the phytotoxicity of AgNPs under modified OECD test conditions. AgNPs were synthesised, characterised and subsequently presented to the L. minor. Results showed that inhibition of plant growth was evident after exposure to small (∼20 nm) and larger (∼100 nm) AgNPs at low concentrations (5 μg L⁻¹) and this effect became more acute with a longer exposure time. There was a linear dose-response relationship after 14 d exposure. Using predicted environmental concentrations for wastewaters it was found that AgNPs may pose a significant potential risk to the environment.     

Diquat associated with copper sources for algae control: Efficacy and ecotoxicology

The aims of this research were to evaluate the efficacy of copper oxychloride (CuCl₂.3Cu(OH)₂), copper hydroxide (Cu(OH)₂) and diquat (1.1′-ethylene-2.2′-bipyridyldiylium dibromide), isolated and in association with 0.1% of both copper sources, in the control of the unicellular algae Ankistrodesmus gracilis and the filamentous algae Pithophora kewesis, and to determine the acute toxicity of the tested chemicals in Hyphressobrycon eques, Pomacea canaliculata, Lemna minor and Azolla caroliniana. The efficacy was estimated by the methods of chlorophyll a and pheophytin a readings, changed into growth inhibition percentage. Both algae were exposed to the following concentrations: 0.2; 0.4; 0.8; 1.2 mg L^?1 of diquat and its association with the copper sources; and 0.1; 0.3; 0.5; 0.7; 1.0 and 1.5 mg L^?1 in the isolated applications of copper hydroxide and copper oxychloride. An untreated control was kept. The acute toxicity was estimatedby 50% lethal concentration (LC50). The copper sources were effective for A. gracilis control, at rates as high as 0.1 mg L^?1 (>95% efficacy). Isolated diquat and its association with copper hydroxide were both effective at rates as high as 0.4 mg L^?1, with 95 and 88% control efficacy, respectively. The copper oxychloride was effective at 0.2 mg L^?1, with 93% efficacy. None of the tested chemicals and associations was effective on P. kewesis control. The most sensitive non target organism to the tested chemicals was L. minor; the less sensitive was H. eques.     

PM10 measurements at McMurdo Station,Antarctica

PM₁₀ aerosols at McMurdo Station, Antarctica were sampled continuously during the austral summers of 1995–1996 and 1996–1997. PM₁₀ (particles with aerodynamic diameters less than 10 μm) mass concentrations at Hut Point, located less than 1 km from downtown McMurdo, averaged 3.4 μg m⁻³, more than an order of magnitude lower than the USEPA annual average National Ambient Air Quality Standard (NAAQS) of 50 μg m⁻³. Concentrations of methanesulfonate and nitrate were similar to those measured at other Antarctic coastal sites. Non-sea-salt sulfate (NSS) concentrations on Ross Island were higher than those found at other coastal locations. The average elemental carbon concentration (129 ng m⁻³) downwind of the station was two orders of magnitude higher than those measured at remote coastal and inland Antarctic sites during summer. Average sulfur dioxide concentrations (746 ng m⁻³) were 3–44 times higher than those reported for coastal Antarctica. Concentrations of Pb and Zn were 17 and 46 times higher than those reported for the South Pole. A methanesulfonate to biogenic sulfate ratio (R) of 0.47 was derived that is consistent with the proposed temperature dependence of R.     

Identification of a phytotoxic photo-transformation product of diclofenac using effect-directed analysis

The pharmaceutical diclofenac (DCF) is released in considerably high amounts to the aquatic environment. Photo-transformation of DCF was reported as the main degradation pathway in surface waters and was found to produce metabolites with enhanced toxicity to the green algae Scenedesmus vacuolatus. We identified and subsequently confirmed 2-[2-(chlorophenyl)amino]benzaldehyde (CPAB) as a transformation product with enhanced toxicity using effect-directed analysis. The EC₅₀ of CPAB (4.8 mg/L) was a factor of 10 lower than that for DCF (48.1 mg/L), due to the higher hydrophobicity of CPAB (log K_ow = 3.62) compared with DCF (log D_ow = 2.04) at pH 7.0.     

Uptake and translocation of arsenite by Pteris vittata L.: effects of glycerol, antimonite and silver

AsIII uptake in living cells is through aquaglyceroporin transporters, but it is unknown in arsenic-hyperaccumulator Pteris vittata. We investigated the effects of AsIII analogs glycerol and antimonite (SbIII) at 0-100 mM and aquaporin inhibitor AgNO₃ at 0-0.1 mM on the uptake of 0.1 mM AsIII or AsV by P. vittata over 1-2 h. Glycerol or SbIII didn’t impact AsIII or AsV uptake by P. vittata (p < 0.05), with As concentrations in the fronds and roots being 4.4-6.3 and 3.9-6.2 mg/kg. However, 0.01 mM AgNO₃ reduced As concentrations in the fronds and roots by 64% and 58%. Hence, AsIII uptake in P. vittata might be via an aquaporin transporter different from glycerol and SbIII transporters. Further as AsIII analogs and aquaporin inhibitor had no impact on AsV uptake, AsIII and AsV were likely taken up by different transporters in P. vittata. Our results imply a different AsIII transporter in P. vittata from other plants.     

Combined effect of polystyrene plastics and triphenyltin chloride on the green algae Chlorella pyrenoidosa

The combined effect of polystyrene (PS) particles and triphenyltin chloride (TPTCl) to the green algae Chlorella pyrenoidosa was studied. The 96 h IC₅₀ of TPTCl to the green algae C. pyrenoidosa was 30.64 μg/L. The toxicity of PS particles to C. pyrenoidosa was size-dependent, with the 96 h IC₅₀ at 9.10 mg/L for 0.55 μm PS but no toxicity observed for 5.0 μm PS. The exposure to 0.55 μm PS led to damage on structure of algal cells, which could in turn cause inhibition on photosynthesis and population growth of the green algae. TPTCl concentrations in test medium were lowered by 15–19% at presence of 0.55 μm PS particles, indicating a reduced bioavailability of TPTCl. In spite of this reduced bioavailability, the presence of PS increased the toxicity of TPTCl, which might be attributed to facilitated uptake of TPTCl by the green algae after the damage of cell structure. The overall results of the present study provided important information on the effect of PS on the bioavailability and toxicity of TPTCl to phytoplankton species.

     

Influence of flooding and metal immobilising soil amendments on availability of metals for willows and earthworms in calcareous dredged sediment-derived soils

Soil amendments previously shown to be effective in reducing metal bioavailability and/or mobility in calcareous metal-polluted soils were tested on a calcareous dredged sediment-derived soil with 26 mg Cd/kg dry soil, 2200 mg Cr/kg dry soil, 220 mg Pb/kg dry soil, and 3000 mg Zn/kg dry soil. The amendments were 5% modified aluminosilicate (AS), 10% w/w lignin, 1% w/w diammonium phosphate (DAP, (NH₄)₂HPO₄), 1% w/w MnO, and 5% w/w CaSO₄. In an additional treatment, the contaminated soil was submerged. Endpoints were metal uptake in Salix cinerea and Lumbricus terrestris, and effect on oxidation-reduction potential (ORP) in submerged soils. Results illustrated that the selected soil amendments were not effective in reducing ecological risk to vegetation or soil inhabiting invertebrates, as metal uptake in willows and earthworms did not significantly decrease following their application. Flooding the polluted soil resulted in metal uptake in S. cinerea comparable with concentrations for an uncontaminated soil.     

Nano-TiO2 enhances the toxicity of copper in natural water to Daphnia magna

The acute toxicity of engineered nanoparticles (NPs) in aquatic environments at high concentrations has been well-established. This study demonstrates that, at a concentration generally considered to be safe in the environment, nano-TiO₂ remarkably enhanced the toxicity of copper to Daphnia magna by increasing the copper bioaccumulation. Specifically, at 2 mg L⁻¹ nano-TiO₂, the (LC₅₀) of Cu²⁺ concentration observed to kill half the population, decreased from 111 μg L⁻¹ to 42 μg L⁻¹. Correspondingly, the level of metallothionein decreased from 135 μg g⁻¹ wet weight to 99 μg g⁻¹ wet weight at a Cu²⁺ level of 100 μg L⁻¹. The copper was found to be adsorbed onto the nano-TiO₂, and ingested and accumulated in the animals, thereby causing toxic injury. The nano-TiO₂ may compete for free copper ions with sulfhydryl groups, causing the inhibition of the detoxification by metallothioneins.     

Ecotoxicity evaluation of selected sulfonamides

Sulfonamides (SAs) are a group of antibiotic drugs widely used in veterinary medicine. The contamination of the environment by these pharmaceuticals has raised concern in recent years. However, knowledge of their (eco)toxicity is still very basic and is restricted to just a few of these substances. Even though their toxicological analysis has been thoroughly performed and ecotoxicological data are available in the literature, a systematic analysis of their ecotoxicological potential has yet to be carried out. To fill this gap, 12 different SAs were chosen for detailed analysis with the focus on different bacteria as well as non-target organisms (algae and plants). A flexible (eco)toxicological test battery was used, including enzymes (acetylcholinesterase and glutathione reductase), luminescent marine bacteria (Vibrio fischeri), soil bacteria (Arthrobacter globiformis), limnic unicellular green algae (Scenedesmus vacuolatus) and duckweed (Lemna minor), in order to take into account both the aquatic and terrestrial compartments of the environment, as well as different trophic levels. It was found that SAs are not only toxic towards green algae (EC₅₀ = 1.54-32.25 mg L⁻¹) but have even stronger adverse effect on duckweed (EC₅₀ = 0.02-4.89 mg L⁻¹) than atrazine - herbicide (EC₅₀ = 2.59 mg L⁻¹).     

Effects of ammonia from livestock farming on lichen photosynthesis

This study investigated if atmospheric ammonia (NH₃) pollution around a sheep farm influences the photosynthetic performance of the lichens Evernia prunastri and Pseudevernia furfuracea. Thalli of both species were transplanted for up to 30 days in a semi-arid region (Crete, Greece), at sites with concentrations of atmospheric ammonia of ca. 60 μg/m³ (at a sheep farm), ca. 15 μg/m³ (60 m from the sheep farm) and ca. 2 μg/m³ (a remote area 5 km away). Lichen photosynthesis was analysed by the chlorophyll a fluorescence emission to identify targets of ammonia pollution. The results indicated that the photosystem II of the two lichens exposed to NH₃ is susceptible to this pollutant in the gas-phase. The parameter PI_ABS, a global index of photosynthetic performance that combines in a single expression the three functional steps of the photosynthetic activity (light absorption, excitation energy trapping, and conversion of excitation energy to electron transport) was much more sensitive to NH₃ than the F_V/F_M ratio, one of the most commonly used stress indicators.     

Size and seasonal distributions of airborne bioaerosols in commuting trains

Aerobiological studies in commuting trains in northern Taiwan were carried out from August, 2007 until July, 2008. Two six-stage (>7 μm, 4.7～7 μm, 3.3～4.7 μm, 2.1～3.3 μm, 1.1～2.1 μm, 0.65～1.1 μm) cascade impactors of 400 orifices were used to collect viable bacteria and fungi, respectively. The levels of carbon monoxide (CO), carbon dioxide (CO₂), formaldehyde (HCHO), temperature, and relative humidity in the commuting trains were also recorded during the sampling period. Results show that bacterial concentrations ranged from 25 to 1530 CFU m^?3, and averaged 417 CFU m^?3. The fungal concentrations ranged from 45 to 1906 CFU m^?3, and averaged 413 CFU m^?3. Additionally, the highest fractions occurred in the fifth stage (1.1～2.1 μm) for both bacteria and fungi. The respirable fractions, R_b and R_f, for bacteria and fungi were 62.8% and 81.4%, respectively, which are higher than those in other studies. Furthermore, the bacterial concentration reached its highest level in autumn, and its lowest level in winter. However, the fungal concentration was highest in spring and lowest in winter. Though the total bacterial or fungal concentration did not exceed the recommendation standard in Taiwan, the relatively high respirable fraction in commuting trains probably implies a higher adverse health risk for sensitive commuters. This study further conducted multiple regression analysis to determine the relationship of various stage fractions of airborne bacteria and fungi with indoor air pollutants (CO and HCHO) and environmental parameters (CO₂, temperature, and relative humidity). The correlation coefficients of multiple regression analysis for total bacteria and fungi concentrations with indoor air pollutants and environmental parameters were 0.707 (p < 0.00376) and 0.612 (p < 0.00471), respectively. There are currently no formally regulated laws for indoor air quality (IAQ) in Taiwan, and this preliminary study can provide references to the Taiwan government on IAQ management.     

Particulate matter emissions from on-road vehicles in a freeway tunnel study

Particulate matter, including coarse particles (PM_2.5–10, aerodynamic diameter of particle between 2.5 and 10 μm) and fine particles (PM_2.5, aerodynamic diameter of particle lower than 2.5 μm) and their compositions, including elemental carbon, organic carbon, and 11 water-soluble ionic species, and elements, were measured in a tunnel study. A comparison of the six-hour average of light-duty vehicle (LDV) flow of the two sampling periods showed that the peak hours over the weekend were higher than those on weekdays. However, the flow of heavy-duty vehicles (HDVs) on the weekdays was significant higher than that during the weekend in this study. EC and OC content were 49% for PM_2.5–10 and 47% for PM_2.5 in the tunnel center. EC content was higher than OC content in PM_2.5–10, but EC was about 2.3 times OC for PM_2.5. Sulfate, nitrate, ammonium were the main species for PM_2.5–10 and PM_2.5. The element contents of Na, Al, Ca, Fe and K were over 0.8 μg m^?3 in PM_2.5–10 and PM_2.5. In addition, the concentrations of S, Ba, Pb, and Zn were higher than 0.1 μg m^?3 for PM_2.5–10 and PM_2.5. The emission factors of PM_2.5–10 and PM_2.5 were 18 ± 6.5 and 39 ± 11 mg km^?1-vehicle, respectively. The emission factors of EC/OC were 3.6/2.7 mg km^?1-vehicle for PM_2.5–10 and 15/4.7 mg km^?1-vehicle for PM_2.5 Furthermore, the emission factors of water-soluble ions were 0.028(Mg²⁺)–0.81(SO₄^2?) and 0.027(NO₂^?)–0.97(SO₄^2?) mg km^?1-vehicle for PM_2.5–10 and PM_2.5, respectively. Elemental emission factors were 0.003(V)–1.6(Fe) and 0.001(Cd)–1.05(Na) mg km^?1-vehicle for PM_2.5–10 and PM_2.5, respectively.     

Atmospheric corrosion effects of HNO3—Influence of temperature and relative humidity on laboratory-exposed copper

The effect of HNO₃ on the atmospheric corrosion of copper has been investigated at varied temperature (15–35 °C) and relative humidity (0–85% RH). Fourier transform infrared (FT-IR) spectroscopy and X-ray diffraction (XRD) confirmed the existence of cuprite and gerhardtite as the two main corrosion products on the exposed copper surface. For determination of the corrosion rate and for estimation of the deposition velocity (V_d) of HNO₃ on copper, gravimetry and ion chromatography has been employed. Temperature had a low effect on the corrosion of copper. A minor decrease in the mass gain was observed as the temperature was increased to 35 °C, possibly as an effect of lower amount of cuprite due to a thinner adlayer on the metal surface at 35 °C. The V_d of HNO₃ on copper, however, was unaffected by temperature. The corrosion rate and V_d of HNO₃ on copper was the lowest at 0% RH, i. e. dry condition, and increased considerably when changing to 40% RH. A maximum was reached at 65% RH and the mass gain remained constant when the RH was increased to 85% RH. The V_d of HNO₃ on copper at ⩾65% RH, 25 °C and 0.03 cm s⁻¹ air velocity was as high as 0.15±0.03 cm s⁻¹ to be compared with the value obtained for an ideal absorbent, 0.19±0.02 cm s⁻¹. At sub-ppm levels of HNO₃, the corrosion rate of copper decreased after 14 d and the growth of the oxide levelled off after 7 d of exposure.     

Response of methane emission to invasion of Spartina alterniflora and exogenous N deposition in the coastal salt marsh

Spartina alterniflora exhibits great invading potential in the coastal marsh ecosystems. Also, nitrogen (N) deposition shows an apparent increase in the east of China. To evaluate CH₄ emissions in the coastal marsh as affected by the invasion of S. alterniflora and N deposition, we measured CH₄ emission from brackish marsh mesocosms vegetated with S. alterniflora and a native plant, Suaeda salsa, and fertilized with exogenous N at the rates of 0 and 2.7 g N m^?2, respectively. Dissolved porewater CH₄ concentration and redox potentials in soils as well as aboveground biomass and stem density of plants were also monitored. The averaged rate of CH₄ emission during the growing season in the S. alterniflora and S. salsa mesocosms without N application was 0.88 and 0.54 mg CH₄ m^?2 h^?1, respectively, suggesting that S. alterniflora plants significantly increased CH₄ emission mainly because of higher plant biomass rather than stem density compared to S. salsa, which delivered more substrates to the soil for methanogenesis. Exogenous N input dramatically stimulated CH₄ emission by 71.7% in the S. alterniflora mesocosm. This increase was attributable to enhancement in biomass and particularly stem density of S. alterniflora driven by N application, which transported greater photosynthesis products than oxygen into soils for CH₄ production and provided more pathways for CH₄ emission. In contrast, there was no significant effect of N fertilization on CH₄ emission in the S. salsa mesocosm. Although N fertilization significantly stimulated CH₄ production by increasing S. salsa biomass, no significant increase in stem density was observed. This fact, along with the low gas transport capacity of S. salsa, failed to efficiently transport CH₄ from wetlands into the atmosphere. Thus we argue that the stimulatory or inhibitory effect of N fertilization on CH₄ emission from wetlands might depend on the gas transport capacity of plants and their relative contribution to substrates for CH₄ production and oxygen for CH₄ oxidation in soil.     

Nitrous oxide emissions from mineral and organic soils of a Norway spruce stand in South–West Germany

Due to the high temporal and spatial variability of N₂O fluxes, estimates of N₂O emission from temperate forest ecosystems are still highly uncertain, particularly at larger scales. Although highest N₂O emissions with up to 7.0 kg N ha⁻¹ yr⁻¹ were mainly reported for soils affected by stagnant water, most of the reported gas flux measurements were performed at forest sites with well-aerated soils yielding mostly to low mean annual emission rates less than 1.0 kg N ha⁻¹ yr⁻¹. This study compares N₂O fluxes from upland (Cambisols) and temporally water-logged (Gleysols, Histosols) soils of the Central Black Forest (South-West Germany) over a period of 2 yr. Mean annual N₂O fluxes from investigated soils ranged between 0.2 and 3.9 kg N ha⁻¹ yr⁻¹. The fluxes showed a large variability between the different soil types. Emissions could be clearly ranked in the following order: Cambisols (0.26–0.75 kg N ha⁻¹ yr⁻¹)<Gleysols (1.37–2.68 kg N ha⁻¹ yr⁻¹)<Histosol (3.66–3.95 kg N ha⁻¹ yr⁻¹). Although the Cambisols cover two-thirds of the investigated area, only about half of the overall N₂O is emitted from this soil type. Therefore, regional or national N₂O fluxes from temperate forest soils are underestimated if soils characterised by intermediate aeration conditions are disregarded.     

Copper-induced response of physiological parameters and antioxidant enzymes in the aquatic macrophyte Potamogeton pusillus

Bioaccumulation and toxicity of copper was evaluated on Potamogeton pusillus L. The effect of copper (5–100 μg L^?1) applied for several days was assessed by measuring changes in the chlorophyll's, phaeophytin's, malondialdehyde, electrical conductivity, glutathione peroxidase (GPX), glutathione reductase (GR) and guaiacol peroxidase (POD) activities. Plants accumulated copper with a maximum of 162 μg g^?1 dw after 7-days exposure at 100 μg L^?1, however most of the metal was accumulated after 1-day exposure. The toxic effect caused by Cu was evident by the reduction of photosynthetic pigments, increase of malondialdehyde and electrical conductivity. P. pusillus shows Cu-induced oxidative stress by modulating antioxidant enzymes like GPX, GR and POD. Antioxidant enzymes activity increased significantly after exposure to 40 μg L^?1 during 24 h, followed by a drop at longer times. Thus, P. pusillus is proposed as a good biomonitor for the assessment of metal pollution in aquatic ecosystems.     

Source apportionment of time and size resolved ambient particulate matter measured with a rotating DRUM impactor

Ambient particulate chemical composition data acquired from samples collected using a three-stage Davis Rotating-drum Universal-size-cut Monitoring (DRUM) impactor in Detroit, MI, between February and April 2002 were analyzed through the application of a three-way factor analysis model. PM_2.5 (particulate matter ⩽2.5 μm in aerodynamic diameter) was collected by a DRUM impactor with 3-h time resolution and three size modes (2.5 μm>D_p>1.15 μm, 1.15 μm>D_p>0.34 μm and 0.34 μm>D_p>0.1 μm). A novel three-way factor analysis model was applied to these data where the source profiles are a three-way array of size, composition and source while the contributions are a matrix of sample by source. Nine factors were identified: road salt, industrial (Fe+Zn), cloud processed sulfate, two types of metal works, road dust, local sulfate source, sulfur with dust, and homogeneously formed sulfate. Road salt had high concentrations of Na and Cl. Mixed industrial emissions are characterized by Fe and Zn. The cloud processed sulfate had a high concentration of S in the intermediate size mode. The first metal works represented by Fe in all three size modes and by Zn, Ti, Cu, and Mn. The second included a high concentration of small size particle sulfur with intermediate size Fe, Zn, Al, Si, and Ca. Road dust contained Na, Al, Si, S, K, and Fe in the large size mode. The local and homogeneous sulfate factors show high concentrations of S in the smallest size mode, but different time series behavior in their contributions. Sulfur with dust is characterized by S and a mix of Na, Mg, Al, Si, K, Ca, Ti, and Fe from the medium and large size modes. This study shows that the utilization of time and size resolved DRUM data can assist in the identification of sources and atmospheric processes leading to the observed ambient concentrations.     

Prediction of Cadmium uptake by brown rice and derivation of soil–plant transfer models to improve soil protection guidelines

Cadmium (Cd) levels in paddy fields across Taiwan have increased due to emission from industry. To ensure the production of rice that meets food quality standards, predictive models or suitable soil tests are needed to evaluate the quality of soils to be used for rice cropping. Levels of Cd in soil and rice grains were measured in 19 paddy fields across the western plains in Taiwan. Cadmium levels in soil range from less than 0.1 mg kg^?1 to 30 mg kg^?1. Measured Cd levels in brown rice were predicted very well (R² > 0.8) based on Cd and Zinc in a 0.01 M CaCl₂ extract or a soil–plant transfer model using the reactive soil Cd content, pH, and cation exchange capacity. In contrast to current soil quality standards used in Taiwan, such models are effective in identifying soils where Cd in rice will exceed food quality standards.