The role of humic substances in chromium sorption onto natural organic matter (peat)

To elucidate mechanisms of Cr³⁺ sorption onto the unaltered solid natural organic matter, the comparative studies of this ion binding from a solution at pH 4.0 onto three selected particle size fractions: 2000–1000 μm, 630–200 μm and 63–20 μm of markedly different HS content and structure, separated by a wet sieving from an overall sample of peat (Brushwood Peat Humus) were carried out. Comparable patterns of COOH groups and CEC_t confirmed that for cation exchange capacity were responsible mainly cations connected with COO⁻ functional groups. It was though found that aliphatic acids in the solid state did not take part in Cr³⁺ binding, thus the finest studied fraction 63–20 μm of the highest contents of functional groups showed the lowest sorption capacity for Cr³⁺, while similar patterns of sorbed Cr³⁺, soluble HS content and base CEC₀ indicated that these parameters were directly interrelated. The base ion exchange processes determined by CEC₀ (with Ca²⁺ as a predominant exchangeable cation) appeared to be not the major mechanisms responsible for Cr³⁺ sorption. For this metal, strong binding to insoluble large molecular weight organic pool two- to threefold prevailed over the ion exchange processes. Very low acid desorption indicated generally low mobility of Cr³⁺-organic compounds.     

Fate of cancerostatic platinum compounds in biological wastewater treatment of hospital effluents

The present work focuses on the fate of two cancerostatic platinum compounds (CPC), cisplatin and carboplatin, as well as of two inorganic platinum compounds, [PtCl₄]²⁻ and [PtCl₆]²⁻ in biological wastewater treatment. Laboratory experiments modelling adsorption of these compounds onto activated sludge showed promising specific adsorption coefficients K_D and K_OC and Freundlich adsorption isotherms. However, the adsorption properties of the investigated substances were differing significantly. Adsorption decreased following the order cisplatin > [PtCl₆]²⁻ > [PtCl₄]²⁻ > carboplatin. Log K_D-values were ranging from 2.5 to 4.3 , log K_OC from 3.0 to 4.7.

A pilot membrane bioreactor system (MBR) was installed in a hospital in Vienna and fed with wastewater from the oncologic in-patient treatment ward to investigate CPC-adsorption in a sewage treatment plant. During three monitoring periods Pt-concentrations were measured in the influent (3–250 μg l⁻¹ Pt) and the effluent (2–150 μg l⁻¹ Pt) of the treatment plant using ICP-MS. The monitoring periods (duration 30 d) revealed elimination efficiencies between 51% and 63% based on averaged weekly input–output budgets. The derived log K_D-values and log K_OC-values ranged from 2.4 to 4.8 and from 2.8 to 5.3, respectively. Species analysis using HPLC-ICP-MS proofed that mainly carboplatin was present as intact drug in the influent and – due to low log K_D – in the effluent of the MBR.     

As(V) adsorption on amorphous iron oxide: Triple layer modelling

The adsorption of As(V) by amorphous iron oxide was investigated at 25°C, 0.01 M NaNO₃ background electrolyte as a function of solution pH(4–10) at three initial As(V) concentrations and two Fe(III) concentrations. As(V) adsorption increased with decreasing pH. A modified Langmuir isotherm has been used for describing an equilibrium partition existing between solid and liquid phases. The triple-layer model was used for simulating As(V) adsorption on iron oxide surface. This model was able to describe As(V) adsorption over the pH range 4–10, all at the concentrations of As(V) and Fe(III) studied. =Fe(H₂AsO₄)⁰, = Fe(HAsO₄)⁻ and = Fe(AsO₄)²⁻ have been shown through simulation with inner-sphere complexation products to be more consistent with experimental adsorption observations than complexation with other surface species.     

Study on the fluorescence characteristics of bromadiolone in aqueous and organized media and application in analysis

The fluorescence spectroscopic behavior of bromadiolone (anticoagulant rodenticide), a substituted 4-hydroxycoumarin derivative, was investigated in water and in organized media like micelles and cyclodextrins. A detailed study on various photophysical parameters like fluorescence intensity (I_F), quantum yield (), lifetime (τ) and steady state fluorescence anisotropy (r) of bromadiolone in aqueous and in organized media was carried out. Bromadiolone in aqueous solution was observed to be in an aggregated state, thereby showing weak emission due to self-quenching. Marked enhancement of fluorescence intensity was observed in organized media like micelles and β-cyclodextrin. A preliminary investigation has been done to find out whether this enhancement of fluorescence can be used to develop a sensitive analytical method for determination of bromadialone in aqueous media. A linear relationship between the fluorescence intensity and concentration of bromadiolone was observed in the range of 0.15–7.9 μg ml⁻¹ in cetyltrimethylammonium bromide (CTAB) and 0.5–26.4 μg ml⁻¹ in β-cyclodextrin medium. The lower detection limit was found to be 37 ng ml⁻¹ in presence of CTAB and 23 ng ml⁻¹ in β-cyclodextrin. Comparison with 4-hydroxycoumarin, an unsubstituted analogue, was made.     

Removal of a cationic dye from aqueous solutions by adsorption onto bentonite clay

The ability of bentonite to remove malachite green from aqueous solutions has been studied for different adsorbate concentrations by varying the amount of adsorbent, temperature, pH and shaking time. Maximum adsorption of the dye, i.e. >90% has been achieved in aqueous solutions using 0.05 g of bentonite at a pH of 9. Thermodynamic parameters such as ΔH°, ΔS° and ΔG° were calculated from the slope and intercept of the linear plots of ln K_D against 1/T. Analysis of adsorption results obtained at 298, 308, 318 and 328 K showed that the adsorption pattern on bentonite seems to follow the Langmuir, Freundlih and D–R isotherms. The temperature increase reduces adsorption capacity by bentonite, due to the enhancement of the desorption step in the mechanism. The numerical values of sorption free energy (E_a) of 1.00–1.12 kJ mol⁻¹ indicated physical adsorption. The kinetic data indicated an intraparticle diffusion process with sorption being first order. The rate constant k was 0.526 min⁻¹. The concentration of malachite green oxalate was measured before and after adsorption by using UV–Vis spectrophotometer.     

Assessment of toxicity of a glyphosate-based formulation using bacterial systems in lake water

A new Aeromonas bioassay is described to assess the potential harmful effects of the glyphosate-based herbicide, Roundup^®, in the Albufera lake, a protected area near Valencia. Viability markers as membrane integrity, culturability and β-galactosidase production of Aeromonas caviae were studied to determine the influence of the herbicide in the bacterial cells. Data from the multifactor analysis of variance test showed no significant differences (P > 0.05) between A. caviae counts of viability markers at the studied concentrations (0, 50 and 100 mg l⁻¹ of glyphosate).

The effects of Roundup^® on microbial biota present in the lake were assessed by measuring the number of indigenous mesophilic Aeromonas in presence of different amounts of the herbicide at 0, 50 and 100 mg l⁻¹ of glyphosate. In samples containing 50 and 100 mg l⁻¹ of glyphosate a significant (P < 0.05) increase in Aeromonas spp. counts and accompanying flora was observed.

The acute toxicity of Roundup^® and of Roundup^® diluted with Albufera lake water to Microtox^® luminescent bacterium (Vibrio fischeri) also was determined. The EC₅₀ values obtained were 36.4 mg l⁻¹ and 64.0 mg l⁻¹ of glyphosate respectively. The acidity (pH 4.5) of the herbicide formulation was the responsible of the observed toxicity.     

Temperature effects on chlorinated-benzene sorption to hydrophobic surfaces

Sorption and desorption of chlorinated benzenes were investigated in a series of column experiments using porous silica that had phenyl groups bonded to the surface; the mass-fraction organic carbon was 0.016. Both sorption and desorption curves were asymmetrical, but they were mirror images of each other for most experiments, indicating good sorption reversibility. The resulting breakthrough curves were fit to an advection-dispersion mathematical model, with sorption as a first-order, reversible reaction. Significantly greater tailing in the chlorinated-benzene breakthrough curves versus the salt-tracer ones was evidence of slow sorption and desorption. ΔH° values for di-, tri- and tetra-chlorobenzene were 13–21 kJ mol₋₁, indicative of strong van der Waals binding. Despite these small values, slow desorption was attributed to slow binding and release rather than diffusion through the bonded organic phase. Desorption rates decreased in going from di- to tri- to tetra- to penta-chlorobenzene. This decrease was significantly more than the decrease in molecular-diffusion coefficients in the same series, suggesting a chemical rather than a physical rate control. There was less difference in sorption rates through the series, suggesting an inverse relation between partition coefficient and desorption rate. ΔG° values were −17 to −23 kJ mol⁻¹, giving TΔS° values of about 4 kJ mol⁻¹. Thus enthalpic contributions to sorption appear to be of greater importance than entropic contributions.     

Relationship between electron donor and microorganism on the dechlorination of carbon tetrachloride by an anaerobic enrichment culture

An investigation involving the supplement of different concentrations of substrates and microorganisms was carried out under anaerobic condition to assess the feasibility of bioremediation of carbon tetrachloride (CCl₄) with the amendment of low concentrations of auxiliary substrate and microorganisms. The concentrations of substrate and microorganisms ranged from 10 to 100 mg/l and from 3.7 × 10⁴ to 3.7 × 10⁶ cell/ml, respectively. The biotransformation rate of CCl₄ increased progressively with the increase in the concentrations of the substrate and microorganisms. In the low biomass-amended system (3.7 × 10⁴cells/ml), 28–71% and 57–96% of CCl₄ removals were exhibited when 10–100 mg/l of acetate or glucose was supplemented, respectively, whereas nearly complete degradation of CCl₄ was observed in the heavily inoculated systems (3.7 × 10⁶ cells/ml). An addition of electron donor in the low microbial activity batches enhanced greater efficiency in dechlorination than in the high microbial activity batches. The second-order rate constants ranged from 0.0059 to 0.0092 l/mg/day in high biomass input system, while a two- to four-fold increase in rate constant was obtained in the low microbial activity system. This study indicates that biomass was the more important environmental parameter than substrate affecting the fate of CCl₄. The addition of auxiliary substrates was effective only in low biomass-amended batches (0.56 mg-VSS/l) and diminished inversely with the increase of microbial concentration.     

Characterization of atmospheric particulate and metallic elements at Taichung Harbor near Taiwan Strait during 2004-2005

Air aerosol samples for TSP (total suspended particulate), coarse particulate (particle matter with aerodynamical diameter 2.5–10 μm, PM_2.5–10), fine particulate (particle matter with aerodynamical diameter <2.5 μm, PM_2.5) and metallic elements were collected during March 2004 to January 2005 at TH (Taichung Harbor) in central Taiwan. The seasonal variation average concentration of TSP (total suspended particulate), coarse particulate (particle matter with aerodynamical diameter 2.5–10 μm, PM_2.5–10) and fine particulate (particle matter with aerodynamical diameter <2.5 μm, PM_2.5) were in the range 132–171.1 μg m⁻³ and 43–49.5 μg m⁻³, respectively. Seasonal variation of metallic elements Cu, Mn, Zn and Fe in the TSP (total suspended particulate) shows that higher concentration was observed during spring. Seasonal variation of metallic elements Pb, Cr and Mg in the TSP (total suspended particulate) shows that higher concentration was observed during winter. The average metallic element TSP (total suspended particulate) concentration order was Fe > Zn > Mg > Cu > Cr > Mn > Pb in spring. In addition, at the TH sampling site, the average concentration variation of TSP (total suspended particulate) displayed the following order: spring > winter > autumn > summer. However, the average concentration variation of coarse particulate (particle matter with aerodynamical diameter 2.5–10 μm, PM_2.5–10) displayed the following order: spring > winter > summer > autumn. Finally, the average concentration variations of fine particulate (particle matter with aerodynamical diameter <2.5 μm, PM_2.5) were in the following order: winter > spring > summer > autumn at the TH sample site.     

Octyl and nonylphenol ethoxylates and carboxylates in wastewater and sediments by liquid chromatography/tandem mass spectrometry

This work presents an LC–MS–MS-based method for the quantitation of nonylphenol ethoxylates (NPEOs) and octylphenol ethoxylates (OPEOs) in water, sediment, and suspended particulate matter, and three of their carboxylated derivatives in water. The alkylphenol ethoxylates (APEOs) were analyzed using isotope dilution mass spectrometry with [¹³C₆]-labeled analogues, whereas the carboxylated derivatives were determined by external standard quantitation followed by confirmation using standard additions. The method was used to study APEO’s behavior in a wastewater treatment plant (WWTP), where total dissolved NP0-16EO concentration was reduced by approximately 99% from influent (390 μg l⁻¹) to final effluent (4 μg l⁻¹), and total OP0-5EO concentration decreased by 94% from 3.1 to 0.2 μg l⁻¹. In contrast, the carboxylated derivatives were formed during the process with NP0-1EC concentrations increasing from 1.4 to 24 μg l⁻¹. Short-chain APEOs were present in higher proportions in particulate matter, presumably due to greater affinity for solids compared to the long-chain homologues. NP (0.49 μg l⁻¹) and NP0-1EC (4.8 μg l⁻¹) were the only APEO-related compounds detected in a surface water sample from a WWTP-impacted estuary; implying that 90% of the mass was in the form of carboxylated derivatives. Sediment analysis showed nonylphenol to be the single most abundant compound in sediments from the Baltimore Harbor area, where differences in homologue distribution suggested the presence of treated effluent in some of the sites and non-treated sources in the rest.     

Study of sorption kinetics of some ionic liquids on different soil types

In the present contribution sorption kinetics experiments under static conditions were utilized in three selected ionic liquids cations (1-ethyl-3-methylimidazolium, 1-butyl-3-methylimidazolium, 1-hexyl-3-methylimidazolium chlorides) study with five type of soil, differing in total organic carbon (TOC) content. The experimental results indicate the sorption capacity growth with increase in TOC content and hydrophobicity of ionic liquid cation. The obtained kinetic sorption parameters as well as distribution coefficients (K_d) were used to estimate the sorption properties of the soil types towards the ionic liquids in question. The Gibbs free energy values indicate that ionic liquid cations sorption on soils could be generally considered as a physical adsorption with exothermic effect. But the values of −dG for studied cations sorption on soil with very high of TOC content in soil (45%) may testify to nature of chemical adsorption. Sorption of the analyzed compounds occurs probably by means of hydrogen bonds, electrostatic and π  π interaction with the organic matter and the clay minerals of the soils.     

Evaluating the impacts of some environmentally relevant factors on the availability of bisphenol A with negligible-depletion SPME

The effect of some environmentally relevant factors including salinity, pH, and humic acids on the availability of bisphenol A (BPA) was evaluated by using the negligible-depletion solid-phase microextraction (nd-SPME) biomimetic method. With the variation of salinity (0–500 mM NaCl) and pH (5.0–8.5) of aqueous solutions, the partition coefficients of BPA between the nd-SPME fiber and the aqueous solution varied in the range of log D = 3.55–3.86, which indicates that the salinity and pH can influence the availability of BPA. By using Acros humic acid as model dissolved organic matter (DOM), it was also demonstrated that the environmental factors such as salinity and pH could affect the partitioning of BPA between DOM and aqueous solutions. The determined partition coefficients of BPA between dissolved organic carbon (DOC) and aqueous solutions were in the range of log D_DOC = 4.03–5.60 for Acros humic acid solutions with 1–50 mg l⁻¹ DOC. The influence of salinity and pH on log D_DOC was more significant at low concentration (0–5 mg l⁻¹) of DOC.     

Leaching and degradation of 21 pesticides in a full-scale model biobed

Filling and cleaning of pesticide sprayers presents a potential risk of pollution of soil and water. Three different solutions for handling sprayers have been suggested: Filling and cleaning in the field, filling and cleaning on hard surfaces with collection of the waste water, and filling and cleaning on a biobed, which is an excavation lined with clay and filled with a mixture of chopped straw, sphagnum and soil with turf on top, and with increased sorption capacity and microbial activity for degradation of the pesticides. In the present study the degradation and leaching of 21 pesticides (5 g of each) was followed in an established full-scale model biobed. Percolate was collected and analysed for pesticide residues, and the biobed material was sampled at three different depths and analysed by liquid chromatography double mass spectrometry (LC-MSMS). During the total study period of 563 days, no traces of 10 out of 21 applied pesticides were detected in the percolate (detection limits between 0.02 and 0.9 μg l⁻¹) and three pesticides were only detected once and at concentrations below 2 μg l⁻¹. During the first 198 days before second application, 14% of the applied herbicide bentazone was detected in the leachate with maximum and mean concentrations of 445 and 172 μg l⁻¹, respectively. About 2% of the initial mecoprop and fluazifop dose was detected in the percolate, with mean concentrations of 23 μg l⁻¹, while MCPA and dimethoate had mean concentrations of 3.5 and 4.7 μg l⁻¹, respectively. Leachate concentrations for the remaining pesticides were generally below the detection limit (0.02–0.9 μg l⁻¹, below 1% of applied). Sorption studies of five pesticides showed that compounds with a low K_d value appeared in the leachate. After 169 days, all pesticides in the biobed profile were degraded to a level below 50% of the calculated initial dose. Pesticides with K_oc values above 100 were primarily found in the uppermost 10 cm and degraded slowest due to the low bioavailability. The 11 most degradable pesticides were all degraded such that less than 3% remained in the biobed after 169 days.

Following second pesticide application of the biobed, leachate was sampled 215 and 365 days after the treatment. This showed the same pesticides to be leached out and at concentrations comparable to those of the first treatment. The same pesticides as after the first treatment were retained in the biobed.     

Determination of trichloroacetic acid in environmental studies using carbon 14 and chlorine 36

Radioisotopes carbon 14 and chlorine 36 were used to elucidate the environmental role of trichloroacetic acid (TCA) formerly taken to be a herbicide and a secondary air pollutant with phytotoxic effects. However, use of ¹⁴C-labeling posed again known analytical problems, especially in TCA extraction from the sample matrix. Therefore—after evaluation of available methods—a new procedure using decarboxylation of [1,2-¹⁴C]TCA combined with extraction of the resultant ¹⁴C-chloroform with a non-polar solvent and its subsequent radiometric measurement was developed. The method solves previous difficulties and permits an easy determination of amounts between 0.4 and 20 kBq (10–500 ng g⁻¹) of carrier-less [1,2-¹⁴C]TCA in samples from environmental investigations. The procedure is, however, not suitable for direct [³⁶Cl]TCA determination in chlorination studies with ³⁶Cl. Because TCA might be microbially degraded in soil during extraction and sample storage and its extraction from soil or needles is never complete, the decarboxylation method—i.e. 2 h TCA decomposition to chloroform and CO₂ in aqueous solution or suspension in closed vial at 90 °C and pH 4.6 with subsequent CHCl₃ extraction—is recommended here, estimated V < 7%. Moreover, the influence of pH and temperature on the decarboxylation of TCA in aqueous solution was studied in a broad range and its environmental relevance is shown in the case of TCA decarboxylation in spruce needles which takes place also at ambient temperatures and might amount more than 10–20% after a growing season. A study of TCA distribution in spruce needles after below-ground uptake shows the highest uptake rate into current needles which have, however, a lower TCA content than older needle-year classes, TCA biodegradation in forest soil leads predominatingly to CO₂.     

Bioaccumulation of anthropogenic contaminants by detritivorous fish in the Río de la Plata estuary: 1-aliphatic hydrocarbons

The temporal variability and bioaccumulation dynamics of C_12–25 n-alkanes, isoprenoids and unresolved aliphatic hydrocarbons (UCM) were studied in a detritivorous fish (Sábalo: Prochilodus lineatus) collected from 1999 to 2005 in the sewage impacted Buenos Aires coastal area. Fish muscles contain huge amounts of n-C_12–25 (165 ± 93, 70 ± 48 or 280 ± 134 μg g⁻¹, dry, fresh and lipid weight, respectively) and UCM (931 ± 560, 399 ± 288 and 1567 ± 802 μg g⁻¹) reflecting the chronic bioaccumulation of fossil fuels from sewage particulates. On a temporal basis, lipid normalized aliphatic concentrations peaked by the end of 2001–2002 during the rainiest period over the last four decades (1750 vs. 1083 ± 4.6 mm in 1999, 2004 and 2005), reflecting an enhanced exposition due to massive anthropogenic fluxes from Metropolitan Buenos Aires in wet years. The hydrocarbon composition in fish muscles is enriched in n-C_15–17 and isoprenoids relative to a fresh crude oil and settling particulates, with fresher signatures during the 2001–2002 maxima. Fish/settling material bioaccumulation factors (BAFs: 0.4–6.4 dry weight or 0.07–0.94 lipid-organic carbon) plotted against K_ow showed a parabolic pattern maximizing at n-C_14–18 and isoprenoids. The optimal bioaccumulation window corresponds to highly hydrophobic (log K_ow: 7.2–9.9), intermediate-size C_14–18 n-alkanes and C_15–20 isoprenoids (MW: 198–282; length: 17.9 to 25.4 Å) with melting points ranging from −19.8 to 28 °C. The uptake efficiency is inversely correlated to melting points and increased from 75% for n-C₂₅ to above 90% for n-C_14–15 and isoprenoids.     

Synchronous-scan fluorescence spectra of Chlorella vulgaris solution

The characterization of the Chlorella vulgaris solution was carried out using synchronous-scan spectroscopy. The range of concentration of algae and Fe(III) in aqueous solutions were 5 × 10⁸–8 × 10⁹ cells l⁻¹ and 10–60 μM, respectively. Effective characterization method used was synchronous-scan fluorescence spectroscopy. The wavelength difference (Δλ) of 90 nm was maintained between excitation and emission wavelengths; 90 nm was found to be the best Δλ for effective characterization of Chlorella vulgaris solution with or without quencher species (e.g., Fe(III), humic acid (HA)) for the first time. The peak was observed at about EX 236.6 nm/EM 326.6 nm for synchronous-scan fluorescence spectra. The fluorescence quenching of algae in system of algae–Fe(III)–HA was studied using synchronous-scan spectroscopy for the first time. Fe(III) was clearly the effective quencher. The relationship between I₀/I (quenching efficiency) and c (concentration of Fe(III) added) was a linear correlation for the algae solution with Fe(III). Also, Aldrich humic acid was found to be an effective quencher. pH effect on synchronous-scan fluorescence intensity of algal solution with Fe(III) and/or HA was evident.     

Efficient removal and mechanisms of water soluble aromatic contaminants by a reduced-charge bentonite modified with benzyltrimethylammonium cation

A novel strategy utilizing the phenyls interaction and the hydrophobic affinity of available siloxane surface in the interlayer of bentonite was proposed to improve the sorption capabilities of organobentonites for water soluble aromatic contaminants. A unique organobentonite (65BTMA) was synthesized by intercalating benzyltrimethylammonium cation (BTMA⁺) into the interlayer of a reduced-charge bentonite with cation exchange capacity (CEC) of 65 cmol kg⁻¹. Phenol, aniline and toluene were used as model compounds of water soluble aromatic contaminants. Their respective removal efficiencies by 65BTMA were achieved at 83.3%, 89.2% and 97.3% at the initial concentration of 20 mg l⁻¹. To reveal the sorption mechanism, sorption characteristics of aromatic contaminants to 65BTMA were compared with that of aliphatic contaminants in similar molecular size. And various organobentonites were prepared by combining TMA⁺ (tetramethylammonium), BTMA⁺, HTMA⁺ (heptyltrimethylammonium) and CTMA⁺ (cetyltrimethylammonium) with two bentonites (CEC = 108 and 65 cmol kg⁻¹). To 65BTMA, sorption magnitudes of aromatic contaminants were much greater than that of aliphatic compounds with similar size; and dramatically higher than those to other organobentonites at low pollutant concentrations. These observations revealed that the strong phenyls interactions contributed significantly to sorb the aqueous soluble aromatic contaminants to 65BTMA (>90%), and which favored to design uniquely powerful sorbents.     

Biogeochemical distinction of methane releases from two Amazon hydroreservoirs

Biogeochemical distinction of methane emissions to the atmosphere may essentially rely on the surface area and morphometry of Amazon hydroreservoirs. Tucuruí (deep) and Samuel (shallow) reservoirs released in average 13.82 ± 22.94 and 71.19 ± 107.4 mg CH₄ m⁻² d⁻¹, respectively. δ¹³C–CH₄ values from the sediments to the atmosphere indicate that the deep reservoir has extended methanotrophic layer, oxidizing large quantities of light isotope methane coming from the sediments, while sediment-generated methane can easily evade the shallow reservoir.     

Quantifying the sorption of organic chemicals on sediments

The use of a reference compound to quantify the sorption of nonpolar organic chemicals is proposed. This is because organic carbon normalized sorption coefficients (K_OC) do appear to be dependent on the type of sediment, and are thus not generally applicable to characterize the sorption properties of chemicals. Therefore, in this paper the hypothesis that nonpolar chemicals sorb in a constant ratio, independent of the sediment, has been investigated. Evidence for this hypothesis is shown with data from the literature. This enables one to compare sorption properties of nonpolar compounds on different sediments, if the differences between the sediments are normalized with a reference chemical rather than with the organic carbon content. Sediments with an organic carbon content of less than 0.1% seem to be unsuitable, because the compounds do not sorb mainly on the organic carbon, but also on other parts of the sediment. Sorption coefficients of compounds with aqueous solubilities in the μg per liter range or octan-1-ol water partition coefficients of more than 10⁵ are strongly influenced by the experimental techniques used. For these compounds the sorption coefficients measured by different techniques are less comparable. To enable comparison of sorption coefficients of hydrophobic chemicals, the use of a chlorobenzene as a reference compound in sorption experiments is suggested.     

Cold season CH4, CO2 and N2O fluxes from freshwater marshes in northeast China

Cold season (winter and thaw) CH₄, CO₂ and N₂O fluxes from freshwater marshes (47°35′N, 133°31′E, Northeast China) were measured, using the static chamber method. The mean CH₄ and CO₂ fluxes from Carex lasiocarpa (Cl) were 0.5 ± 0.19 and 6.23 ± 1.36 mg C m⁻² h⁻¹, respectively, and those from Deyeuxia angustifoli (Da) were 0.18 ± 0.15 and 5.22 ± 2.48 mg C m⁻² h⁻¹, respectively in winter. There was no significant difference between Cl and Da (p > 0.05). The contributions of winter CH₄ fluxes were about 5.5% and 3% in the Cl and Da, respectively. Marshes are an important potential N₂O sink in winter season in northeast China. During thaw, the CH₄ and CO₂ emissions rapidly increased, 4.5–6 times of winter emissions. Wetland became a source of N₂O. Cold season gases flux from northern wetlands play an important role in the seasonal gas exchange.