CuO/AOCF类Fenton催化剂的制备及光催化性能

以偕胺肟纤维(AOCF)为载体,采用配位-沉淀法研制了一种新型的类Fenton催化剂CuO/AOCF.用SEM、EDS和XRD对CuO/AOCF的表面形貌、晶体结构和表面成分进行分析,结果显示:CuO纳米颗粒均匀分布在AOCF表面.以活性红染料为目标降解物及其去除率为评价指标,考察CuO/AOCF与H_2O_2组成类Fenton催化剂的光催化性能.结果表明:在氙灯光照作用下,0.6 g·L~(-1)CuO/AOCF、2 m L·L~(-1)H_2O_2、反应时间为80 min,活性红溶液几乎完全被降解.对比同质量粉体CuO,CuO/AOCF对光催化性能有着更好的促进作用.CuO/AOCF重复使用5次后降解率仍能大于80%.动力学研究表明,该类Fenton催化降解反应遵循一级反应动力学规律.     

MOFs衍生CuO/ZnO催化剂的制备及其光催化性能的研究

利用Cu₃(BTC)₂为材料模板制备金属氧化物CuO,通过光沉积引入Zn2+煅烧合成双金属氧化物催化剂CuO/ZnO,研究了该催化剂在可见光条件下对罗丹明B的光催化降解性能,确定了罗丹明B在降解过程中的主要活性物种,并利用液相原位红外技术探究其降解机理。结果表明:MOFs衍生物CuO/ZnO催化剂具有优良的光催化降解能力,可见光响应150 min后,对10 mg/L罗丹明B的降解率最高达到67.56%以上,其中发挥主要作用的活性物种是超氧自由基·O₂-;经过5次循环实验后降解率仍在50%以上,证明该材料具有较好的可重复利用性。通过液相原位红外光谱检测,分析推断罗丹明B分子在降解过程中存在乙基、羧基和苯环芳香环结构的破坏以及氨基副产物的释放过程。该研究结果可为高效光催化体系的开发及污染物降解机理的研究提供参考。     

CNT/CdS/壳聚糖-H2O2可见光光催化甲基橙脱色研究

利用共沉淀法制备了具有可见光响应的CNT/CdS复合薄膜光催化材料.以氙灯模拟日光光源,并以双氧水辅助氧化,对甲基橙进行光催化降解,探讨了不同工艺、催化剂用量、双氧水用量、甲基橙初始浓度、溶液pH值、无机阴离子对光催化降解脱色的影响以及催化剂的重复使用性.实验结果表明:双氧水对CNT/CdS光催化甲基橙脱色产生协同作用...     

Detection of intermediates in the TiO2-assisted photodegradation of Rhodamine B under visible light irradiation

The photocatalytic degradation of dye Rhodamine B （RhB） in the presence of TiO2 nanostdpe or P25 under visible light irradiation was investigated. The degradation intermediates were identified using Infrared spectra （IR spectra）, ^1H nuclear magnetic resonance （^1HNMR） spectra, and gas chromatography-mass spectroscopy （GC-MS）. The IR and the ^1HNMR results showed that the large conjugated chromophore structure of RhB was efficiently destroyed under visible light irradiation in both the photocatalytic systems （TiO2 nanostfipe or P25 and Rhodamine B systems）. GC-MS results showed that the main identified intermediates were ethanediotic acid, 1,2-benzenedicarboxylic acid, 4-hydroxy benzoic acid and benzoic acid, which were almost the same in the TiO2 nanostdpes and P25 systems. This work provides a good insight into the reaction pathway（s） for the TiO2-assisted photocatalytic degradation of dye pollutants under visible light irradiation.     

In situ preparation of visible-light-driven carbon quantum dots/NaBiO3 hybrid materials for the photoreduction of Cr(VI)

In this study, different carbon quantum dots (CQDs)/NaBiO₃ hybrid materials were synthesized as photocatalysts to effectively utilize visible light for the photocatalytic degradation of contaminants effectively. These hybrid materials exhibit an enhanced photocatalytic reduction of hexavalent chromium (Cr(VI)) in the aqueous medium. Zero-dimensional nanoparticles of CQDs were embedded within the two-dimensional NaBiO₃ nanosheets by the hydrothermal process. Compared with that of the pure NaBiO₃ nanosheets, the photocatalytic performance of the hybrid catalysts was significantly high and 6 wt.% CQDs/NaBiO₃ catalyst exhibited better photocatalytic performance. We performed the first-principles density functional theory calculations to study the interfacial properties of pure NaBiO₃ nanosheets and hybrid photocatalysts, and confirmed the CQDs played an important role in the CQDs/NaBiO₃ composites. The experimental results indicated that the enhanced reduction of Cr(VI) was probably due to the high loading of CQDs (electron acceptor) on NaBiO_3, which made NaBiO₃ nanomaterials to respond in visible light and significantly improved their electron-hole separation efficiency.     

锌铜复合氧化物光催化降解甲基对硫磷

采用共沉淀法制了锌铅复合氧化物光催化剂，并通过其光催化降解甲基对硫磷农药。结果发现，锌铜复合氧化物能有效地利用空气中的氧，使甲基对硫磷快速光降解，其中ＺｎＯ是一个较好的氧化物半导体。     

溴氧化铋可见光催化降解高效氯氰菊酯的研究

在可见光(λ≥420 nm)照射下,利用溴氧化铋(bismuth oxide bromide,BiOBr)作为光催化剂降解农药高效氯氰菊酯(beta-cypermethrin,beta-CP),采用气相色谱仪跟踪检测beta-CP降解过程中的变化,研究了BiOBr在可见光照条件下催化降解beta-CP的特性;同时,探讨了介质pH条件和催化剂用量对其光催化降解效果的影响;采用化学需氧量(COD)测定仪测定了beta-CP光催化体系深度矿化氧化的效果.结果表明,在可见光激发下BiOBr能有效降解农药beta-CP,在实验条件下光催化反应10 h后,beta-CP的降解率达到94.68%;随着催化剂用量和pH的增大,beta-CP的降解速率在不断加快;光催化反应36 h,Vis/BiOBr/beta-CP体系的COD去除率达67.99%.利用对苯二甲酸荧光法和过氧化物酶催化氧化方法跟踪测定光催化过程中氧化物种的变化,结果表明其光催化反应机制涉及·OH氧化过程.     

Photocatalytic degradation of the dye sulforhodamine-B： A comparative study of different light sources

The photocatalytic degradation of dye pollutant sulforhodamine-B （SRB） in aqueous titanium dioxide （TiO2） dispersions was examined under three lighting regimes： UV light （330 nm〈λ〈 380 nm）, sunlight, and visible light （λ〉450 nm）, all investigated at pH=2.5. Total organic carbon （TOC） and chemical oxygen demand （CODer） assays show that the degradation rate of SRB is much higher when irradiated with UV and sunlight compared with visible light. The temporal concentration changes of SRB illustrated a first-order reaction and the rate constant, k, is 0.197 min^-1, 0.152 min^-1, 0.027 min^-1, respectively, under the three lighting conditions. The final mineralized products were amine compounds identified by infrared spectrophotometry. When irradiated with visible light, the photocatalytic degradation rate could be improved by lowering the H2O2 concentration and inhibited by increasing the H2O2 concentration, but results contrary to the above were obtained when UV light was used for irradiation.     

TiO_2/beads as a photocatalyst for the degradation of X_(3B) azo dye

ＩｎｔｒｏｄｕｃｔｉｏｎＥｎｖｉｒｏｎｍｅｎｔａｌｐｒｏｔｅｃｔｉｏｎｅｘｐｅｒｔｓｉｎｍａｎｙｃｏｕｎｔｒｉｅｓｐａｙｈｉｇｈａｔｔｅｎｔｉｏｎｔｏｔｈｅｄｉｓｐｏｓａｌｏｆｔｈｅｗａｓｔｅｗａｔｅｒｗｉｔｈｄｙｅｏｒｗｉｔｈｄｅｅｐｃｈｒｏｍａ.Ｔｈｏｕｇｈａｔｐｒｅｓｅｎｔｂｉｏｄｅｇｒａｄａｔｉｏｎｉｓｕｓｅｄｉｎｔｈｅｄｉｓｐｏｓａｌｏｆｔｈｅｗａｓｔｅｗａｔｅｒ,ｔｈｅｃｏｎｃｅｎｔｒａｔｉｏｎａｎｄｃｈｒｏｍａｉｎｔｈｅｄｉｓｐｏｓｅｄｗａｔｅｒａｒｅｓｔｉｌｌｖｅｒｙｈｉｇｈａｎｄ…     

TiO2/beads as a photocatalyst for the degradation of X3B azo dye

The feasibility of photocatalytic degradation of X3B azo dye by TiO2/beads photocatalyst was studied.The effects of parameters such as the amount of TiO2/beads,airflow ,as well as the concentrations of H2O2,Fe^3 ,Mg^2 and Na^ on the photocatalytic degradation of X3B azo dye were also studied.The results showed that 25mg/dm^3 X3B azo dye can be photocatalytically degraded completely by 30 min illumination with a 375W medium pressure mercury lamp.Adding a small amount of H2O2 or Fe^3 ,the efficiencies of photocatalytic degradation of X3B azo dye were increased rapidly.The mechanisms of the reaction and the role of the additives were also investigated.After 120 hours TiO2/beads showed no significant loss of the photocatalytic activity.     

H_3PW_(12)O_(40)/TiO_2可见光下光催化降解孔雀石绿的研究

以钛酸四丁酯为原料,采用溶胶-凝胶法制备TiO2光催化剂,然后浸渍法制备出H3PW12O40/TiO2复合型光催化剂,并运用XRD、SEM、FT-IR和DRS对催化剂进行表征和分析.研究了可见光光照下H3PW12O40/TiO2对孔雀石绿降解的光催化活性,考察了浸渍量、催化剂用量、底物浓度、pH值对光催化降解率的影响.实验表明,在pH=5条件下,H3PW12O40/TiO2催化剂用量为0.3g.L-1,浓度为10mg·mL-1的孔雀石绿溶液在2L·min-1曝气、300W可见光下光照4h后光催化降解率为78%,比TiO2光催化活性提高了24%.     

类单晶纳米片状WO3的制备及其光催化性能

通过调控水热温度、反应pH值和前驱体比例制备了类单晶WO₃纳米片光催化材料,通过XRD,SEM,TEM,XPS,UV-vis和光电流密度测试等手段对WO₃纳米片的形貌、晶型、组成以及电荷分离性能进行了表征,并研究了可见光照条件下其对罗丹明B的催化降解活性.结果表明,研究获得了厚度约10nm,边长尺寸约300~500nm的单斜晶相WO₃纳米片,且纳米片具有连续整齐的晶格结构、较高的能带结构和较好的电荷载流子分离性能.光催化实验结果表明,WO₃纳米片催化降解罗丹明B的反应过程符合一级动力学,反应速率常数为2.91h^-1,是WO₃纳米颗粒催化罗丹明B降解反应速率常数（0.56h^-1）的5.2倍,推测WO₃纳米片较好的催化活性是源于其较高的载流子分离效率.自由基捕获实验证明,可见光照下·OH和·O₂^-均为WO₃纳米片催化降解污染物过程中的活性自由基.循环降解实验证明制备的光催化剂具有良好的稳定性.     

活性炭负载TiO2催化剂对直接耐酸大红4BS溶液的光催化降解研究

采用溶胶-凝胶法制备了活性炭负载型TiO2催化剂,采用了XRD、BET和SEM对催化剂进行表征。研究了催化剂对直接耐酸大红4BS的紫外光催化降解,比较了活性炭、P25和TiO2／AC对4BS溶液的降解能力,探讨了催化剂煅烧温度和投加量以及染料溶液的初始浓度对光催化降解率的影响,并对催化剂进行了回收再生实验。结果表明,500℃下煅烧的TiO2／AC催化剂比表面积为1147．88m^2／g、TiO2粒径为21．9nm、晶相组成以锐钛矿为主,具有良好的光催化活性和稳定性;90min后2g／L催化剂对150mg／L的4BS溶液紫外光催化降解率达到99．8％。     

α-FeOOH类Fenton可见光光催化降解有毒有机污染物

用氨水滴定法制备了针铁矿α-FH,以α-FeOOH作为光催化剂,橙Ⅱ(Orange-Ⅱ)和2,4-二氯苯酚(2,4-dichlorophenol,DCP)为目标化合物,研究了可见光照射下(λ＞420 nm) α-FeOOH对其光催化降解的催化特性.结果表明:在可见光照射下,pH为7.02,H2O2浓度为1.5×10-2...     

混晶纳米TiO_2的制备及其光催化降解有毒有机污染物

以无定形TiO2沉淀为前驱体,在水热条件下得到了含板钛矿(121)相混晶纳米TiO2,考察了水热反应的温度和时间等因素对含板钛矿型TiO2光催化活性的影响.采用XRD、TEM对制备的TiO2进行初步表征,并结合光催化(λ≤387 nm)降解有机染料的光活性探针反应.结果表明,水热温度为150℃,时间为24 h时,可制得具有较高光催化活性的纳米TiO2,其纳米尺寸为14.20 nm,板钛矿相含量63.6%,锐钛矿含量为36.4%.光催化实验中跟踪研究了其对染料酸性桃红(sulforhodmineB,SRB)的褪色及2,4-DCP的降解情况,并对降解中间产物H2 O2、.OH进行跟踪测定,实验结果表明板钛矿相混晶TiO2的光催化主要涉及.OH氧化历程,光照射9 h对SRB和2,4-DCP的矿化氧化分别达到89%和78%,循环5次光催化降解SRB实验,催化剂表现出较好的稳定性,催化性能无明显变化.     

吸附树脂/铁酞菁对甲基橙的光催化降解

针对铁酞菁在水溶液中易于聚合而降低催化活性,同时在均相光催化体系中分离困难、难以重复利用的问题,将铁酞菁负载在吸附树脂上,制得多相催化剂。该催化剂在可见光的照射下能有效地催化H2O2降解偶氮染料甲基橙。考察了催化剂用量、H2O2投加量、pH值、温度等因素对甲基橙去除效果的影响。结果表明,甲基橙初始浓度为50 mg/L,卤灯功率为100 W,催化剂投加量为1.0 g/L,H2O2用量为0.2 mol/L,pH为3,温度为35℃时,反应10 h,甲基橙去除率达到91%,且催化剂所含铁离子无流失,具有很好的稳定性,可重复使用。     

上转换发光剂掺杂纳米TiO2的制备及可见光降解乙基紫的研究

合成了一种新型含有稀土金属Er的上转换发光剂40CdF₂·60BaF₂·1.6Er₂O₃,此上转换发光剂在488 nm可见光的激发下,产生了5个波长均小于387 nm的上转换紫外光发射峰.采用超声波分散的方法制备出了上转换发光剂掺杂的纳米TiO₂可见光光催化剂.利用X-射线衍射(XRD)及透射电镜(TEM)对催化剂进行了表征.以乙基紫染料为研究对象,研究了在(三基色灯下发出的)可见光的照射下该可见光光催化剂的催化降解性能,并与未掺杂的纳米TiO₂粉末的催化性能进行了对比.结果表明,作为掺杂成分的上转换发光剂可有效地将可见光转化为紫外光并被纳米TiO₂粉末吸收利用,在可见光照射12.0 h后乙基紫降解率达到了99.68%,大大高于未掺杂纳米TiO2时的降解率.     

Solar photocatalytic decomposition of two azo dyes on multi-walled carbon nanotubes (MWCNTs)/TiO2 composites

Multi-walled carbon nanotubes (MWCNTs)/TiO₂ composite photocatalysts with high photoactivity were prepared by sol-gel process and further characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FT-IR), and UV-vis absorption spectra. Compared to pure TiO₂, the combination of MWCNTs with titania could cause a significant absorption shift toward the visible region. The photocatalytic performances of the MWCNTs/TiO₂ composite catalysts were evaluated for the decomposition of Reactive light yellow K-6G (K-6G) and Mordant black 7 (MB 7) azo dyes solution under solar light irradiation. The results showed that the addition of MWCNTs enhanced the adsorption and photocatalytic activity of TiO₂ for the degradation of azo dyes K-6G and MB 7. The effect of MWCNTs content, catalyst dosage, pH, and initial dye concentration were examined as operational parameters. The kinetics of photocatalytic degradation of two dyes was found to follow a pseudo-first-order rate law. The photocatalyst was used for seven cycles with photocatalytic degradation efficiency still higher than 98%. A plausible mechanism is also proposed and discussed on the basis of experimental results.     

流化床光催化反应器处理偶氮染料4BS废水中试研究

采用 3 0～ 40目负载型光催化剂 ,以高压汞灯为紫外光源 ,研究了偶氮染料 4BS废水在流化床光催化中试反应器中的降解 ,针对有关工艺参数和反应动力学进行了考察。结果表明 :所用中试反应器对 4BS具有较好的降解效果 ;催化剂浓度存在最佳值 ;适当增加光强及溶解氧浓度均有利于光催化降解效率的提高 ;染料 4BS溶液的光催化降解过程符合表现一级反应动力学规律 ,并且表观反应速率常数与 4BS初始浓度之间具有近似负一级的动力学关系     

硫氯共掺杂g-C3N4纳米片光催化降解染料

采用气泡模板法制备了硫氯共掺杂的g-C₃N₄纳米片,通过XRD、FT-IR、XPS、SEM、UV-vis DRS和PL等手段对样品进行了表征,利用可见光照射下光催化降解罗丹明B（RhB）来评价其催化性能.结果表明,改性后的硫氯共掺杂的g-C₃N₄纳米片具有更大的比表面积,电子-空穴的分离效率提高,并且掺杂引起了能带结构的改变,使降解RhB的氧化基团从单一的·O₂^-变为·O₂^-和·OH双氧化基团,极大地提高了降解能力,制备的硫氯共掺杂g-C₃N₄纳米片对RhB的降解速率常数达到了0.01683min^-1,是纯氮化碳的5.5倍.