Total human exposure: basic concepts, EPA field studies, and future research needs

Historically, environmental regulatory programs designed to protect public health have monitored pollutants only in geophysical carrier media (for example, outdoor air, streams, soil). Field studies have identified a gap between the levels observed in geophysical carrier media and the concentrations with which people actually come into contact: their daily exposures. A new approach--Total Human Exposure (THE)--has evolved to fill this gap and provide the critical data needed for accurately assessing public health risk. The THE approach considers a three-dimensional "bubble" around each person and measures the concentrations of all pollutants contacting that bubble, either through the air, food, water, or skin. Two basic THE approaches have emerged: (1) the direct approach using probability samples of populations and measuring pollutant concentrations in the food eaten, air breathed, water drunk, and skin contacted; and (2) the indirect approach using human activity pattern-exposure models to predict population exposure distributions. Using the direct approach, EPA has conducted over 20 field studies for pollutants representing four groups--volatile organic compounds, carbon monoxide, pesticides, and particles--in 15 cities in 12 states. The indirect modeling approach has been applied to several of these pollutants. Additional research is needed in a great variety of areas. Even from the few projects completed thus far, the THE approach has yielded a rich new data base for risk assessments and has provided many surprises about the relative contribution of various pollutant sources to public health risk.     

Total Human Exposure: Basic Concepts,EPA Field Studies,and Future Research Needs

Historically, environmental regulatory programs designed to protect public health have monitored pollutants only in geophysical carrier media (for example, outdoor air, streams, soil). Field studies have identified a gap between the levels observed in geophysical carrier media and the concentrations with which people actually come into contact: their daily exposures. A new approach—Total Human Exposure (THE)—has evolved to fill this gap and provide the critical data needed for accurately assessing public health risk. The THE approach considers a three-dimensional "bubble" around each person and measures the concentrations of all pollutants contacting that bubble, either through the air, food, water, or skin. Two basic THE approaches have emerged: (1) the direct approach using probability samples of populations and measuring pollutant concentrations in the food eaten, air breathed, water drunk, and skin contacted; and (2) the indirect approach using human activity pattern-exposure models to predict population exposure distributions. Using the direct approach, EPA has conducted over 20 field studies for pollutants representing four groups—volatile organic compounds, carbon monoxide, pesticides, and particles—in 15 cities in 12 states. The indirect modeling approach has been applied to several of these pollutants. Additional research is needed in a great variety of areas. Even from the few projects completed thus far, the THE approach has yielded a rich new data base for risk assessments and has provided many surprises about the relative contribution of various pollutant sources to public health risk.     

Occurrence of carcinogenic amino-alpha-carbolines in some environmental samples

The carcinogenic amino-alpha-carbolines, 2-amino-9H-pyrido[2,3-b]indole and AalphaC, have been measured in airborne particles, rain water, soil and cigarette-smoke-polluted indoor air by high-performance liquid chromatography. These carcinogens were found in all kinds of environmental samples examined, although MeAalphaC was not detected in soil. Considering the present results, together with the previous findings that these carcinogens were present in foodstuffs, cigarette smoke and diesel-exhaust particles, amino-alpha-carbolines are likely to be ubiquitous environmental pollutants. Our data also support the hypothesis that amino-alpha-carbolines are formed through combustion of various materials such as food, grass and petroleum.     

Exposure of ruminants to persistent organic pollutants and potential of decontamination

Human activities are emitting persistent organic pollutants (POPs) to the environment. These compounds have raised concerns about the risk of transfer through the food chain via animal products. They are characterized by a strong persistence in environmental matrices and a lipophilicity which may lead to their accumulation in fat tissues. In EU Regulations (no. 1881/2006, 1259/2011), maximum acceptable levels for polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans (PCDD/Fs), and dioxin-like or nondioxin-like polychlorinated biphenyls (PCBs) in food of animal origin have been set. Transfer rates from contaminated fodder to milk have been established: for PCBs, the rate of transfer varies from 5 to 90 % and for PCDD/Fs from 1 to 40 %. The differential transfer of the compounds towards milk is related to the hydrophobicity of the pollutants and to their metabolic susceptibility. According to numerous authors, soil is the major reservoir for POPs, and its involuntary ingestion by farm animals reared outdoors may be the main cause of animal product contamination (meat, milk, or eggs). Recent studies seem to indicate that soil is a real risk matrix in terms of transfer of pollutants to the food chain. A POP crisis management is extremely difficult, since it impacts many farmers located in the contaminated area. The question arising is to know if livestock contaminated by POPs may be decontaminated and further used for their initial purpose. Recent data demonstrate that the decontamination process appear feasible and depends on initial level of contamination or the physiological status of the animals.     

Derivation of exemption formulas for air quality regulatory applications

The regulatory agencies and the industries have the responsibility for assessing the environmental impact from the release of air pollutants, and for protecting environment and public health. The simple exemption formula is often used as a criterion for the purpose of screening air pollutants. That is, the exemption formula is used for air quality review and to determine whether a facility applying for and described in a new, modified, or revised air quality plan is exempted from further air quality review. The Bureau of Ocean Energy Management’s (BOEM) air quality regulations are used to regulate air emissions and air pollutants released from the oil and gas facilities in the Gulf of Mexico. If a facility is not exempt after completing the air quality review, a refined air quality modeling will be required to regulate the air pollutants. However, at present, the scientific basis for BOEM’s exemption formula is not available to the author. Therefore, the purpose of this paper is to provide the theoretical framework and justification for the use of BOEM’s exemption formula. In this paper, several exemption formulas have been derived from the Gaussian and non-Gaussian dispersion models; the Gaussian dispersion model is a special case of non-Gaussian dispersion model. The dispersion parameters obtained from the tracer experiments in the Gulf of Mexico are used in the dispersion models. In this paper, the dispersion parameters used in the dispersion models are also derived from the Monin-Obukhov similarity theory. In particular, it has been shown that the total amount of emissions from the facility for each air pollutant calculated using BOEM’s exemption formula is conservative.

Implications:?The operation of offshore oil and gas facilities under BOEM’s jurisdiction is required to comply with the BOEM’s regulations. BOEM’s air quality regulations are used to regulate air emissions and air pollutants released from the oil and gas facilities in the Gulf of Mexico. The exemption formulas have been used by BOEM and other regulatory agencies as a screening tool to regulate air emissions emitted from the oil and gas and other industries. Because of the BOEM’s regulatory responsibility, it is important to establish the scientific basis and provide the justification for the exemption formulas. The methodology developed here could also be adopted and used by other regulatory agencies.     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO2, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well. Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO2 pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.     

Heavy metal pollution in China: Origin,pattern and control

GOAL, SCOPE AND BACKGROUND: Heavy metal is among one of the pollutants, which cause severe threats to humans and the environment in China. The aim of the present review is to make information on the source of heavy metal pollution, distribution of heavy metals in the environment, and measures of pollution control accessible internationally, which are mostly published in Chinese. METHODS: Information from scientific journals, university journals and governmental releases are compiled focusing mainly on Cd, Cu, Pb and Zn. Partly Al, As, Cr, Fe, Hg, Mn and Ni a included also in part as well. RESULTS AND DISCUSSION: In soil, the average contents of Cd, Cu, Pb and Zn are 0.097, 22.6, 26.0 and 74.2 mg/kg, respectively. In the water of the Yangtze River Basin, the concentrations of Cd, Cu, Pb and Zn are 0.080, 7.91, 15.7 and 18.7 microg/L, respectively. In reference to human activities, the heavy metal pollution comes from three sources: industrial emission, wastewater and solid waste. The environment such as soil, water and air were polluted by heavy metals in some cases. The contents of Cd, Cu, Pb and Zn even reach 3.16, 99.3, 84.1 and 147 mg/kg, respectively, in the soils of a wastewater irrigation zone. These contaminants pollute drinking water and food, and threaten human health. Some diseases resulting from pollution of geological and environmental origin, were observed with long-term and non-reversible effects. CONCLUSIONS: In China, the geological background level of heavy metal is low, but with the activity of humans, soil, water, air, and plants are polluted by heavy metals in some cases and even affect human health through the food chain. RECOMMENDATIONS AND OUTLOOK: To remediate and improve environmental quality is a long strategy for the polluted area to keep humans and animals healthy. Phytoremediation would be an effective technique to remediate the heavy metal pollutions.     

Coadsorption of carbofuran and lead at the air/water interface. Possible occurrence of non-volatile pollutant cotransfer to the atmosphere

The weak solubility of carbofuran allows adsorption at the air/water interface. Carbofuran-rich layers can then induce the coadsorption of metallic salts such as lead nitrate; on the other hand, when carbofuran is missing, no adsorption of this salt takes place. This phenomenon was quantitatively studied through surface tension measurements under concentration conditions close to the environmental ones. Heavy metal salt adsorbed about ten times more than carbofuran. Evidence was then provided that the simultaneous presence of both pollutants in water favours their adsorption and passing from water to the atmosphere through mechanisms such as bubbling.     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover, the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO₂, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.

Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO₂ pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.     

Frank A. Chambers

Abstract

This work assessed the usefulness of a current air quality model (American Meteorological Society/Environmental Protection Agency Regulatory Model [AERMOD]) for predicting air concentrations and deposition of perfluorooctanoate (PFO) near a manufacturing facility. Air quality models play an important role in providing information for verifying permitting conditions and for exposure assessment purposes. It is important to ensure traditional modeling approaches are applicable to perfluorinated compounds, which are known to have unusual properties. Measured field data were compared with modeling predictions to show that AERMOD adequately located the maximum air concentration in the study area, provided representative or conservative air concentration estimates, and demonstrated bias and scatter not significantly different than that reported for other compounds. Surface soil/grass concentrations resulting from modeled deposition flux also showed acceptable bias and scatter compared with measured concentrations of PFO in soil/grass samples. Errors in predictions of air concentrations or deposition may be best explained by meteorological input uncertainty and conservatism in the PRIME algorithm used to account for building downwash. In general, AERMOD was found to be a useful screening tool for modeling the dispersion and deposition of PFO in air near a manufacturing facility.     

Gas–particle partitioning of persistent organic pollutants in the Western Balkan countries affected by war conflicts

Background, aim, and scope  

Bombing and destruction of the industrial and military targets accompanied by complete or incomplete combustion during the war conflict and NATO operation in former Yugoslavia caused the emission of persistent organic pollutants into the atmosphere, water, and soil. A total of 129 ambient air samples from 24 background, urban, and industrial sites, including hot spots, were collected to assess a gas–particle partitioning behavior of various persistent organic pollutants.     

Organochlorine pollution in tropical rivers (Guadeloupe): role of ecological factors in food web bioaccumulation

Concentrations of organochlorine pesticides and stable isotope ratios of nitrogen and carbon were measured in a tropical freshwater ecosystem to evaluate the contamination level of biota and examine the bioaccumulation patterns of pollutants through the food web. Chemical analyses showed a general and heavy contamination of the entire food web. They revealed the strong accumulation of pollutants by juveniles of diadromous fishes and shrimps, as they re-enter the river. The role of ecological factors in the bioaccumulation of pesticides was evaluated. Whereas the most persistent pollutants (chlordecone and monohydro-chlordecone) were related to the organisms diet and habitat, bioaccumulation of β-HCH was only influenced by animal lipid content. The biomagnification potential of chlordecone through the food chain has been demonstrated. It highlighted the importance of trophic transfer in this compound bioaccumulation process. In contrast, bioconcentration by passive diffusion from water seemed to be the main exposure route of biota to β-HCH.     

Calculation of environmental concentration and comparison of output for existing chemicals using regional multimedia modeling

The environmental fate of 40 existing chemicals is discussed using the EUSES multimedia distribution and risk assessment model with site-specific parameter setting in an urban area of Japan including a highly industrial region. There has been a strong need to assess the environmental fate of a huge number of existing chemicals. Data on the emission amounts of chemicals are essential for such prediction, and PRTR surveys may yield this data. The study delivered the following results: (1) Volatile compounds with large amounts of emission showed higher predicted concentrations in air, and the concentrations of several compounds agreed well with averaged monitoring data within an order of magnitude. (2) A close relationship was found between the concentration of water and that of sediment, suggesting that the fate of chemicals in sediment essentially depended on the water environment. (3) A group of volatile solvents had high mass distribution ratio to air. Some compounds having high solubility in water were also included in that group due to the high ratio of air emission. Highly hydrophobic compounds with logK(OW) larger than 6.0 showed a high distribution ratio to soil and sediment. (4) Volatile compounds were mostly taken through air. The exposure through fish is a dominant pathway for highly hydrophobic compounds. (5) Exposure ratio could be gathered from physicochemical properties. The exposure from fish intake was roughly estimated by logK(OW), whereas exposure from air and water intake was difficult to estimate simply by vapor pressure and solubility in water, respectively.     

Kinetic models for predicting bioaccumulation of pollutants in ecosystems

Steady state kinetic models, which may be useful for the prediction from simple data, of the bioaccumulation of liophilic pollutants in ecosystems are discussed. For some aquatic species, such as Mytilus edulis, bioconcentration factors (BCFs) are closely related to water solubilities, and octanol: water partition coefficients (Kows). In other cases, more complex models are necessary to take account of metabolism and/or uptake from food. Somewhat different considerations apply in the estimation of bioaccumulation factors (BFs) for terrestrial organisms that cannot excrete lipophilic compounds by diffusion into ambient water. The relationship between half-lives and BFs is discussed. Metabolism is necessary for the effective elimination of lipophilic pollutants by terrestrial animals, and a model is proposed for the prediction of BFs from kinetic data obtained from in vitro metabolism studies. If such a model can be successfully developed it will make possible the prediction of bioaccumulation of pollutants by a wide range of species which cannot be studied by present methods.     

Solubility analysis and disposal options of combustion residues from plants grown on contaminated mining area

Biomass, as a renewable energy source, is an excellent alternative for the partial replacement of fossil fuels in thermal and electric energy production. A new fuel type as biomass for energy utilisation includes ligneous plants with considerable heavy metal content. The combustion process must be controlled during the firing of significant quantities of contaminated biomass grown on brownfield lands. By implementing these measures, air pollution and further soil contamination caused by the disposal of the solid burning residue, the ash, can be prevented. For the test samples from ligneous plants grown on heavy metal-contaminated fields, an ore mine (already closed for 25 years) was chosen. With our focus on the determination of the heavy metal content, we have examined the composition of the soil, the biomass and the combustion by-products (ash, fly ash). Our results confirm that ash resulting from the combustion must be treated as toxic waste and its deposition must take place on hazardous waste disposal sites. Biomass of these characteristics can be burnt in special combustion facility that was equipped with means for the disposal of solid burning residues as well as air pollutants.     

Congener-specific intake fractions for PCDDs/DFs and Co-PCBs: modeling and validation

Intake fractions (iFs) for emissions to air, water, and soil for 17 PCDDs/DFs and 12 Co-PCBs were calculated with a level III multimedia model and a food-chain exposure model in succession. The two integrated models were tested by comparing the predicted and measured concentrations in the environment and by comparing intakes through food. Measurement-based iFs were also calculated and compared with the model-based iFs. The air concentrations predicted by the fate model were close to the median of the observed concentrations, whereas the predicted soil and water concentrations were one-third to one-tenth the observed concentrations. This difference was large in case of PCDDs and Co-PCBs, which was explained by the past pollution such as commercial PCB products and PCDD impurities in chloronitrofen (CNP) and pentachlorophenol (PCP). For fish, the predicted and observed exposures agreed well each other. For meat and milk, the predicted exposures were about 10 times the observed exposures for PCDDs/DFs, whereas the predicted and observed values agreed well for Co-PCBs. When the model was modified to consider feeding of fish meal to livestock and geographic bias in feed-grass production, the predicted congener profile was comparable to the measured profile. The comparison also suggested that chickens should be modeled separately from other terrestrial livestock. The model-based iFs for air emission of OCDD and 2378-TCDD were 0.001% and 0.1%, respectively. The iFs of most Co-PCBs were higher than those of PCDDs/DFs. These iF differences suggest the importance of the fate factor in assessing emissions of the 29 congeners.     

动态法测试空气净化器甲醛去除性能的研究

通过动态法测试水吸收型空气净化器A和活性炭过滤吸附型净化器B对甲醛的去除性能,探索更为合理的方法以评价空气净化器对气态污染物的去除性能.对净化器A去除甲醛的短期测试结果表明,净化器对甲醛浓度为0.3、0.5、0.8和1 mg/m3的连续空气流均有明显的净化效果,对甲醛的去除速率在0.91～2.78 mg/h之间.对净化...     

The Impact of Particulate Emissions Control On the Control of Other MWC Air Emissions

On December 20, 1989, the Environmental Protection Agency (EPA) proposed revised new source performance standards for new municipal waste combustion (MWC) units and guidelines for existing sources. The proposed national regulations require tighter particulate matter control and address pre-combustion, combustion, and post-combustion controls, the latter two depending on capacity and age of the facility.

The air pollutants of concern when municipal solid waste (MSW) is burned will be discussed. Generally, particulate control is an inherent part of the systems used to limit the emissions of these air pollutants. The relationships between MWC air emissions (acid gases, trace organics, and trace heavy metals) control and particulate control will be discussed. Test results to quantify air pollutant emissions from MWC units and their control will be presented and compared with the proposed regulations.     

Removal of organic contaminants in bioretention medium amended with activated carbon from sewage sludge

Bioretention, also known as rain garden, allows stormwater to soak into the ground through a soil-based medium, leading to removal of particulate and dissolved pollutants and reduced peak flows. Although soil organic matter (SOM) is efficient at sorbing many pollutants, amending the bioretention medium with highly effective adsorbents has been proposed to optimize pollutant removal and extend bioretention lifetime. The aim of this research was to investigate whether soil amended with activated carbon produced from sewage sludge increases the efficiency to remove hydrophobic organic compounds frequently detected in stormwater, compared to non-amended soil. Three lab-scale columns (520 cm³) were packed with soil (bulk density 1.22 g/cm³); activated carbon (0.5% w/w) was added to two of the columns. During 28 days, synthetic stormwater—ultrapure water spiked with seven hydrophobic organic pollutants and dissolved organic matter in the form of humic acids—was passed through the column beds using upward flow (45 mm/h). Pollutant concentrations in effluent water (collected every 12 h) and polluted soils, as well as desorbed amounts of pollutants from soils were determined using GC-MS. Compared to SOM, the activated carbon exhibited a significantly higher adsorption capacity for tested pollutants. The amended soil was most efficient for removing moderately hydrophobic compounds (log K _ow 4.0–4.4): as little as 0.5% (w/w), carbon addition may extend bioretention medium lifetime by approximately 10–20 years before saturation of these pollutants occurs. The column tests also indicated that released SOM sorb onto activated carbon, which may lead to early saturation of sorption sites on the carbon surface. The desorption test revealed that the pollutants are generally strongly sorbed to the soil particles, indicating low bioavailability and limited biodegradation.

     

Transport of ammonium perfluorooctanoate in environmental media near a fluoropolymer manufacturing facility

In order to understand better the pathways for transport of ammonium perfluorooctanoate (APFO) from a point source, a focused investigation of environmental media (water and soil) near a fluoropolymer manufacturing facility (Site) was undertaken. Methods were developed and validated at 2 microg kg(-1) [the limit of quantitation (LOQ)] in soil, and at 50 ng l(-1) in water. Environmental media were sampled from a public water supply well field located north of the Site, across a river. The data suggest that APFO air emissions from the Site are transported to the well field, deposited onto the soil, and then migrate downward with precipitation into the underlying aquifer.