Alternative energy balances for Bulgaria to mitigate climate change

Alternative energy balances aimed to mitigate greenhouse gas (GHG) emissions are developed as alternatives to the baseline energy balance. The section of mitigation options is based on the results of the GHG emission inventory for the 1987–1992 period. The energy sector is the main contributor to the total CO₂ emissions of Bulgaria. Stationary combustion for heat and electricity production as well as direct end-use combustion amounts to 80% of the total emissions. The parts of the energy network that could have the biggest influence on GHG emission reduction are identified. The potential effects of the following mitigation measures are discussed: rehabilitation of the combustion facilities currently in operation; repowering to natural gas; reduction of losses in thermal and electrical transmission and distribution networks; penetration of new combustion technologies; tariff structure improvement; renewable sources for electricity and heat production; wasteheat utilization; and supply of households with natural gas to substitute for electricity in space heating and cooking. The total available and the achievable potentials are estimated and the implementation barriers are discussed.

     

Life cycle assessment of a pulverized coal power plant with post-combustion capture, transport and storage of CO2

In this study the methodology of life cycle assessment has been used to assess the environmental impacts of three pulverized coal fired electricity supply chains with and without carbon capture and storage (CCS) on a cradle to grave basis. The chain with CCS comprises post-combustion CO₂ capture with monoethanolamine, compression, transport by pipeline and storage in a geological reservoir. The two reference chains represent sub-critical and state-of-the-art ultra supercritical pulverized coal fired electricity generation. For the three chains we have constructed a detailed greenhouse gas (GHG) balance, and disclosed environmental trade-offs and co-benefits due to CO₂ capture, transport and storage. Results show that, due to CCS, the GHG emissions per kWh are reduced substantially to 243 g/kWh. This is a reduction of 78 and 71% compared to the sub-critical and state-of-the-art power plant, respectively. The removal of CO₂ is partially offset by increased GHG emissions in up- and downstream processes, to a small extent (0.7 g/kWh) caused by the CCS infrastructure. An environmental co-benefit is expected following from the deeper reduction of hydrogen fluoride and hydrogen chloride emissions. Most notable environmental trade-offs are the increase in human toxicity, ozone layer depletion and fresh water ecotoxicity potential for which the CCS chain is outperformed by both other chains. The state-of-the-art power plant without CCS also shows a better score for the eutrophication, acidification and photochemical oxidation potential despite the deeper reduction of SO_x and NO_x in the CCS power plant. These reductions are offset by increased emissions in the life cycle due to the energy penalty and a factor five increase in NH₃ emissions.     

CO2-free paper?

Black liquor gasification–combined cycle (BLGCC) is a new technology that has the potential to increase electricity production of a chemical pulping mill. Increased electricity generation in combination with the potential to use biomass (e.g. bark, hog fuel) more efficiently can result in increased power output compared to the conventional Tomlinson-boiler. Because the BLGCC enables an integrated pulp and paper mill to produce excess power, it can offset electricity produced by power plants. This may lead to reduction of the net-CO₂ emissions. The impact of BLGCC to offset CO₂ emissions from the pulp and paper industry is studied. We focus on two different plant designs and compare the situation in Sweden and the US. The CO₂ emissions are studied as function of the share of recycled fibre used to make the paper. The study shows that under specific conditions the production of “CO₂-free paper” is possible. First, energy efficiency in pulp and paper mills needs to be improved to allow the export of sufficient power to offset emissions from fossil fuels used in boilers and other equipment. Secondly, the net-CO₂ emission per ton of paper depends strongly on the emission reduction credits for electricity export, and hence on the country or grid to which the paper mill is connected. Thirdly, supplemental use of biomass to replace fossil fuel inputs is important to reduce the overall emissions of the pulp and paper industry.     

Estimation of annual CH4 and N2O emissions from fluidised bed combustion: An advanced measurement-based method and its application to Finland

The aim of this study was to develop and apply an advanced, measurement based method for the estimation of annual CH₄ and N₂O emissions and thus gain improved understanding on the actual greenhouse gas (GHG) balances of combustion of fossil fuels, peat, biofuels and REF. CH₄ and N₂O emissions depend strongly on combustion conditions, and therefore the emission factors used in the calculation of annual emissions contain significant uncertainties. Fluidised bed combustion (FBC) has many good properties for combustion of different types of fuels and fuels of varying quality, e.g., biofuels and wastes. Therefore, it is currently increasing its market share. In this study, long term measurements (up to 50 days) were carried out at seven FBC boilers representing different size classes, loadings and fuel mixes. Both decreasing load and increasing share of coal in fuel mix increased N₂O emissions. Measurement results from different loading levels were combined with the common loading curves of similar plants in Finland to estimate annual emissions. Based on the results, recommendations for emission factors for the Finnish GHG emission inventory are given. The role of FBC as a potential technology for the utilisation of biofuels and wastes with future GHG reduction requirements is discussed.     

The role of electricity in sustainable development

Current projections estimating world population growth read in conjunction with corresponding projections of increased world energy consumption, point to electricity as the cleaner fuel of the future, especially because of its high efficiency and low levels of pollution. Due mostly to the fact that the electrical end-use devices are considerably more efficient than those using other forms of energy, most developed countries show decreasing curves of energy intensity as technologies become more sophisticated and shift over to increased reliance on electricity. It is therefore argued in this article that a gradual shift away from fossil fuels to electricity is a promising possibility to bring down global air pollution and emissions of greenhouse gases to acceptable levels. Examples are given of greater efficiency achieved by electrification. Overall gains in energy efficiency from the change over from fossil fuels to electricity, are possible even in situations where the electricity is generated by fossil fuel combustion, despite the loss of primary energy in the conversion process. The article also presents electricity generating projects designed for developing countries and countries with economies in transition. The generation of electricity from the combustion of renewable sources (biomass waste), fossil fuels, and other innovative methods are outlined.     

Co-production of hydrogen and electricity with CO2 capture

Electricity and hydrogen can be used as energy carriers to reduce emissions of CO₂ from small and mobile energy users. One of the most promising technologies for the production of electricity and hydrogen with low CO₂ emissions is coal gasification with CO₂ capture and storage. Performance and cost data are presented for plants which produce electricity and hydrogen alone and plants which co-produce both of these energy carriers. The co-production plants include plants which produce a fixed ratio of hydrogen to electricity and plants which are able to vary the ratio while continuing to operate the gasification and CO₂ capture parts of the plant at full load. The paper also assesses the ability of these types of plants to satisfy the varying demands for hydrogen and electricity in future energy supply systems. The lowest cost option for the scenarios assessed in the paper is the use of flexible co-production plants with underground buffer storage of hydrogen.     

Estimating the potential of greenhouse gas mitigation in Kazakhstan

As part of the studies related to the obligations of the UN Framework Convention on Climate Change, the Republic of Kazakhstan started activities to inventory greenhouse gas (GHG) emissions and assess of GHG mitigation options. The objective of this paper is to present an estimate of the possibility of mitigating GHG emissions and determine the mitigation priorities. It presents a compilation of the possible options and their assessment in terms of major criteria and implementation feasibility. Taking into account the structure of GHG emissions in Kazakhstan in 1990, preliminary estimates of the potential for mitigation are presented for eight options for the energy sector and agriculture and forestry sector. The reference scenario prepared by expert assessments assumes a reduction of CO₂ emissions in 1996–1998 by about 26% from the 1990 level due to general economic decline, but then emissions increase. It is estimated that the total potential for the mitigation of CO₂ emissions for the year 2000 is 3% of the CO₂ emissions in the reference scenario. The annual reduction in methane emissions due to the estimated options can amount to 5%–6% of the 1990 level.

     

The environmental life cycle assessment of agricultural sector in Thailand: EIO‐LCA approach

Agriculture is one of the major sectors in Thailand, with more than half of the population employed in agriculture‐related occupations. This study evaluated energy consumption and greenhouse gas (GHG) emissions of the Thai agricultural sector by applying the economic input–output life cycle assessment (EIO‐LCA) approach. The model evaluates the entire agricultural sector supply chain. Based on one million Thai baht (approximately $27,800 U.S. dollars) final demand of the rice paddy sector, the carbon dioxide (CO₂) emissions from the electricity sector are responsible for 27% (1,246 kilograms [kg] CO₂) of the total CO₂ emissions, whereas the emissions from paddy activities associated with the fertilizers and pesticides sector account for 16% (760 kg CO₂) and 11% (513 kg CO₂), respectively. The top three largest GHG emissions from the total agricultural sector supply chain are associated with the oil palm, the coffee and tea, and the fruit sectors. The government should promote and encourage sustainable agriculture by reducing the use of fertilizers and pesticides and by utilizing energy‐saving technologies.     

Bioethanol from waste: Life cycle estimation of the greenhouse gas saving potential

This paper considers two alternative feedstocks for bioethanol production, both derived from household waste—Refuse Derived Fuel (RDF) and Biodegradable Municipal Waste (BMW). Life Cycle Assessment (LCA) has been carried out to estimate the GHG emissions from bioethanol using these two feedstocks. An integrated waste management system has been considered, taking into account recycling of materials and production of bioethanol in a combined gasification/bio-catalytic process. For the functional unit defined as the ‘total amount of waste treated in the integrated waste management system’, the best option is to produce bioethanol from RDF—this saves up to 196 kg CO₂ equiv. per tonne of MSW, compared to the current waste management practice in the UK.However, if the functional unit is defined as ‘MJ of fuel equiv.’ and bioethanol is compared with petrol on an equivalent energy basis, the results show that bioethanol from RDF offers no saving of GHG emissions compared to petrol. For example, for a typical biogenic carbon content in RDF of around 60%, the life cycle GHG emissions from bioethanol are 87 g CO₂ equiv./MJ while for petrol they are 85 g CO₂ equiv./MJ. On the other hand, bioethanol from BMW offers a significant GHG saving potential over petrol. For a biogenic carbon content of 95%, the life cycle GHG emissions from bioethanol are 6.1 g CO₂ equiv./MJ which represents a saving of 92.5% compared to petrol. In comparison, bioethanol from UK wheat saves 28% of GHG while that from Brazilian sugar cane – the best performing bioethanol with respect to GHG emissions – saves 70%. If the biogenic carbon of the BMW feedstock exceeds 97%, the bioethanol system becomes a carbon sequester. For instance, if waste paper with the biogenic carbon content of almost 100% and a calorific value of 18 MJ/kg is converted into bioethanol, a saving of 107% compared to petrol could be achieved. Compared to paper recycling, converting waste paper into bioethanol saves 460 kg CO₂ equiv./t waste paper or eight times more than recycling.     

Impact of Human Activities on Carbon Dioxide (CO<Subscript>2</Subscript>) Emissions: A Statistical Analysis

Summary The balance of evidence suggests a perceptible human influence on global ecosystems. Human activities are affecting the global ecosystem, some directly and some indirectly. If researchers could clarify the extent to which specific human activities affect global ecosystems, they would be in a much better position to suggest strategies for mitigating against the worst disturbances. Sophisticated statistical analysis can help in interpreting the influence of specific human activities on global ecosystems more carefully. This study aims at identifying significant or influential human activities (i.e. factors) on CO₂ emissions using statistical analyses. The study was conducted for two cases: (i) developed countries and (ii) developing countries. In developed countries, this study identified three influential human activities for CO₂ emissions: (i) combustion of fossil fuels, (ii) population pressure on natural and terrestrial ecosystems, and (iii) land use change. In developing countries, the significant human activities causing an upsurge of CO₂ emissions are: (i) combustion of fossil fuels, (ii) terrestrial ecosystem strength and (iii) land use change. Among these factors, combustion of fossil fuels is the most influential human activity for CO₂ emissions both in developed and developing countries. Regression analysis based on the factor scores indicated that combustion of fossil fuels has significant positive influence on CO₂ emissions in both developed and developing countries. Terrestrial ecosystem strength has a significant negative influence on CO₂ emissions. Land use change and CO₂ emissions are positively related, although regression analysis showed that the influence of land use change on CO₂ emissions was still insignificant. It is anticipated, from the findings of this study, that CO₂ emissions can be reduced by reducing fossil-fuel consumption and switching to alternative energy sources, preserving exiting forests, planting trees on abandoned and degraded forest lands, or by planting trees by social/agroforestry on agricultural lands.     

A novel process integration,optimization and design approach for large-scale implementation of oxy-fired coal power plants with CO2 capture

The widespread use of fossil fuels within the current energy infrastructure is considered as the largest source of anthropogenic emissions of carbon dioxide, which is largely blamed for global warming and climate change. At the current state of development, the risks and costs of non-fossil energy alternatives, such as nuclear, biomass, solar, and wind energy, are so high that they cannot replace the entire share of fossil fuels in the near future timeframe. Additionally, any rapid change towards non-fossil energy sources, even if possible, would result in large disruptions to the existing energy supply infrastructure. As an alternative, the existing and new fossil fuel-based plants can be modified or designed to be either “capture” or “capture-ready” plants in order to reduce their emission intensity through the capture and permanent storage of carbon dioxide in geological formations. This would give the coal-fired power generation units the option to sustain their operations for longer time, while meeting the stringent environmental regulations on air pollutants and carbon emissions in years to come.Currently, there are three main approaches to capturing CO₂ from the combustion of fossil fuels, namely, pre-combustion capture, post-combustion capture, and oxy-fuel combustion. Among these technology options, oxy-fuel combustion provides an elegant approach to CO₂ capture. In this approach, by replacing air with oxygen in the combustion process, a CO₂-rich flue gas stream is produced that can be readily compressed for pipeline transport and storage. In this paper, we propose a new approach that allows air to be partially used in the oxy-fired coal power plants. In this novel approach, the air can be used to carry the coal from the mills to the boiler (similar to the conventional air-fired coal power plants), while O₂ is added to the secondary recycle flow as well as directly to the combustion zone (if needed). From a practical point of view, this approach eliminates problems with the primary recycle and also lessens concerns about the air leakage into the system. At the same time, it allows the boiler and its back-end piping to operate under slight suction; this avoids the potential danger to the plant operators and equipment due to possible exposure to hot combustion gases, CO₂ and particulates. As well, by integrating oxy-fuel system components and optimizing the overall process over a wide range of operating conditions, an optimum or near-optimum design can be achieved that is both cost-effective and practical for large-scale implementation of oxy-fired coal power plants.     

Nexus between renewable energy consumption,economic growth,and CO2 emissions in Algeria: New evidence from the Fourier-Bootstrap ARDL approach

Governments often impose new energy strategies to support new CO₂ emission-reducing technologies without affecting economic growth. Hence, this study aims to re-investigate the relationship between economic growth, renewable energy use, and CO₂ emissions in Algeria from 1990 to 2018. Motivated by the mixed findings of the existing literature, which ignore the Fourier function and bootstrap test and apply the newly developed Fourier bootstrap autoregressive distributed lag model (FARDL). Our findings indicate that renewable energy use and growth have a long-run relationship with CO₂ emissions and do not accept the existence of the Environmental Kuznets Curve (EKC) hypothesis for CO₂ emissions in Algeria. In the long term, the results show that renewable energy use has a negative and significant impact, and growth has a positive and statistically significant effect on CO₂ emissions. In the short run, the findings indicate that renewable energy use reduces CO₂ emissions, while both the growth and squared growth had positive and statistically insignificant impacts on CO₂ emissions, confirming the lack of evidence supporting the EKC hypothesis. Moreover, the causality test indicates a one-way causation from growth to renewable energy use, confirming the conservation hypothesis for Algeria and from growth to CO₂ emissions. Interestingly, we found one-way causality from CO₂ emissions to renewable energy use, attributing this to the fact that renewable energy usage has yet to reach a point that it can significantly cause a CO₂ emissions reduction. Based on the results, we recommend that policymakers design appropriate policies to decarbonize energy consumption, e.g., increasing fossil fuel costs and implementing a carbon tax. In contrast, Algeria should promote new CO₂ emission-reducing technologies without affecting economic growth, e.g., tax exemptions and reductions for enterprise owners in the renewable energy industry.     

Comparative Life Cycle Assessment of Lignocellulosic Ethanol Production: Biochemical Versus Thermochemical Conversion

Lignocellulosic biomass can be converted into ethanol through either biochemical or thermochemical conversion processes. Biochemical conversion involves hydrolysis and fermentation while thermochemical conversion involves gasification and catalytic synthesis. Even though these routes produce comparable amounts of ethanol and have similar energy efficiency at the plant level, little is known about their relative environmental performance from a life cycle perspective. Especially, the indirect impacts, i.e. emissions and resource consumption associated with the production of various process inputs, are largely neglected in previous studies. This article compiles material and energy flow data from process simulation models to develop life cycle inventory and compares the fossil fuel consumption, greenhouse gas emissions, and water consumption of both biomass-to-ethanol production processes. The results are presented in terms of contributions from feedstock, direct, indirect, and co-product credits for four representative biomass feedstocks i.e., wood chips, corn stover, waste paper, and wheat straw. To explore the potentials of the two conversion pathways, different technological scenarios are modeled, including current, 2012 and 2020 technology targets, as well as different production/co-production configurations. The modeling results suggest that biochemical conversion has slightly better performance on greenhouse gas emission and fossil fuel consumption, but that thermochemical conversion has significantly less direct, indirect, and life cycle water consumption. Also, if the thermochemical plant operates as a biorefinery with mixed alcohol co-products separated for chemicals, it has the potential to achieve better performance than biochemical pathway across all environmental impact categories considered due to higher co-product credits associated with chemicals being displaced. The results from this work serve as a starting point for developing full life cycle assessment model that facilitates effective decision-making regarding lignocellulosic ethanol production.     

Global Warming Impact of Electricity Generation from Beef Cattle Manure: A Life Cycle Assessment Study

We compare calculated greenhouse gas emissions for a North American beef feedlot operation, which includes biogas production by anaerobic digestion with subsequent electricity generation (the AD case), to the emissions for a “business as usual” case, which includes both a feedlot and an equivalent amount of grid-generated electricity. Anaerobic digestion, biogas production and electricity production are the major sources of differences in emissions. Fertilizer production, crop production, manure collection and spreading, as well as the associated transport stages are also considered within the LCA system boundaries; impacts on life cycle emissions from these sources are lower. Running a feedlot and producing electricity using typical grid power plants produces 3,845 kg CO_2?eq/MWh while running a feedlot, which generates biogas to produce electricity, produces 2,965 kg CO_2?eq/MWh. This savings of 880 kg CO_2?eq/MWh arises because the net power generation in the AD case emits about 90% less life cycle GHG emissions compared to grid-average electricity. The high overall emission levels arise due to emissions associated with enteric fermentation in beef cattle as the main source of GHG emissions in both the “business as usual” and the AD cases. It contributed 57% of total emissions for the feedlot /biogas /electricity system and 44% of total emissions for the feedlot /grid electricity system.     

Panel heterogeneous distribution analysis of trade and modernized agriculture on CO2 emissions: The role of renewable and fossil fuel energy consumption

In line with the global target of reducing climate change and its impact, this study explored the causal relationship between CO₂ emissions, modernized agriculture, trade openness, aggregate and disaggregate energy consumption in 14 African countries from 1990–2013 using a panel quantile estimation procedure. The empirical results showed that value addition to agricultural commodities declines CO₂ emissions in countries with high pollution levels. The study revealed a positive nexus between CO₂ emissions and energy consumption homogeneously distributed across quantiles. Trade openness was found to lower CO₂ emissions in countries with lower and higher levels of environmental pollution. While fossil fuel energy consumption was found to exacerbate CO₂ emissions, renewable energy consumption confirmed its mitigating effect on environmental pollution. The institution of climate‐smart agricultural options will sustainably increase productivity and income while adapting to climate change by reducing greenhouse gas emissions. Diversification of energy technologies with clean and modern energy sources like renewables avoid the over‐dependence on fossil fuels for agricultural purposes. Trade policies can stimulate flows of technology and investment opportunities for specialization in production and economies of scale. Hence, the consideration of policies that boost agricultural sector productivity and create an efficient market for international trade in Africa will help in improving livelihoods.     

The Effect of Local Biomass Projects on Energy Balance and GHG Emission: A Life Cycle Approach

Emerging attention has been given to the use of biomass in local areas for its contribution to reducing fossil fuel dependence and mitigating global warming. The objective of the present study is to develop a method that quantitatively assesses the effects of local biomass projects on fossil fuel consumption and greenhouse gas (GHG) emission. A practical method based on a life cycle approach is proposed and applied to a case of bioethanol project in Miyako Islands of Japan. The project is aiming to produce bioethanol from molasses within the islands, and to replace the entire gasoline consumed in the islands to E3 fuel (i.e., a mixture of 3% ethanol and 97% gasoline by volume). The assessment using the developed method revealed that, first, the complete shift from gasoline to E3 fuel allows for decreases in fossil fuel consumption and GHG emission. Second, the performance of the project is improved by the integration of the ethanol plant and the sugar factory. Moreover, the assessment found that, in small-scale bioethanol projects, the contribution of capital goods to life cycle fuel consumption and GHG emission is not negligible.     

Paper and biomass for energy?: The impact of paper recycling on energy and CO2 emissions

The pulp and paper industry is placed in a unique position as biomass used as feedstock is now in increasingly high demand from the energy sector. Increased demand for biomass increases pressure on the availability of this resource, which might strengthen the need for recycling of paper. In this study, we calculate the energy use and carbon dioxide emissions for paper production from three pulp types. Increased recycling enables an increase in biomass availability and reduces life-cycle energy use and carbon dioxide emissions. Recovered paper as feedstock leads to lowest energy use (22 GJ/t) and CO₂ emissions (−1100 kg CO₂/t) when biomass not used for paper production is assumed to be converted into bio-energy. Large differences exist between paper grades in e.g. electricity and heat use during production, fibre furnish, filler content and recyclability. We found large variation in energy use over the life-cycle of different grades. However, in all paper grades, life-cycle energy use decreases with increased recycling rates and increased use of recovered fibres. The average life-cycle energy use of the paper mix produced in The Netherlands, where the recycling rate is approximately 75%, is about 14 GJ/t. This equals CO₂ savings of about 1 t CO₂/t paper if no recycled fibres would be used.     

Environmental and socio-economic assessment of co-combustion of coal, biomass and non-hazardous wastes in a Power Plant

Under the framework of the European project named COPOWER, the possibility to partially substitute coal used in a 243 MW_th Power Plant by biomass and non-hazardous wastes for the production of electricity and steam was assessed. Three combustion scenarios were studied, based on the combustion tests performed in a Power Plant located in Duisburg (Germany): Scenario 0 (Sc0) - combustion of coal; Scenario 1 (Sc1) - combustion of coal + sewage sludge (SS) + meat and bone meal (MBM); Scenario 2 (Sc2) - coal + SS + wood pellets (WP). An environmental and socio-economic assessment of these three scenarios was performed. In the environmental point of view, Sc0 was the worst scenario, mainly due to the emission of greenhouse gases (GHG). Sc1 was the best scenario, mainly due to the reduction of GHG emission, eutrophication chemical species and ozone depletion gases. In the socio-economic point of view, Sc0 was the worst scenario, mainly due to the absence of GHG abatement, and Sc1 was the best scenario due to the best cost of electricity production and negative cost of avoided emissions.     

Environmental benefits from the use of the residual biomass in nurseries

Every year, nurseries waste about 40 t of residual biomass for each ha of potted plants cultivation. The European nursery sector deals with about 90,000 ha of cultivated land and 120,000 ha of nurseries, with a turnover of 19.8 billion Euros in 2011. In recent years, a number of Italian projects highlighted that GHG (greenhouse gas) emissions for the nursery sector range between 37 tCO₂eq/ha/year and 45 tCO₂eq/ha/year for potted plants, mainly due to the consumption of electric energy, plastics and peat. Moreover, other studies analyse the impacts associated to nurseries, recommending best practices for energy reductions and waste recycle or reuse. Therefore, the present work focused its attention to the possible environmental benefits associated to the reuse of residues (wood and substrate) of potted plants that are discarded from the nursery production chain. GHG emissions and fossil energy requirement were quantified by considering the CO₂eq (CO₂ equivalent) and the CER (cumulative energy requirement) respectively, in order to assess the environmental impacts of two different scenarios proposed for the materials recovery. Final results highlighted that the solutions which are able to recover the substrate and the wood allow impact reductions compared to landfill disposal. In particular, the scenario consisting in the immediate separation of the substrate from the root-plant system and the successive chipping of wood for energetic reuse, allows higher savings than those obtainable through shredding and subsequent wind separation. Moreover, for what concerns the CO₂eq, an adequate use of the residual biomass make it possible to compensate the GHG emissions of the nurseries up to 15%.     

A disaggregated emissions inventory for Taiwan with uses in hybrid input‐output life cycle analysis (IO‐LCA)

This paper reports on a life‐cycle analysis (LCA) of Taiwan's “agriculture and forestry”, “crude petroleum, coal and natural gas extraction” and “electricity generation” sectors, revealing for the first time Taiwan's CO₂ and CH₄ emissions inventories and matching Taiwan's input‐output sectors. Integrated hybrid input‐output life cycle analysis is used to disaggregate the electricity generation sector into nuclear, hydro, gas, oil and coal, and cogeneration. Results show that the fossil‐fuel‐related electricity sub‐sectors have higher CO₂ emissions intensity than the remaining sectors in the economy and that the “paddy rice” sector is Taiwan's most CH₄‐intensive sector, making rice cultivation an important source of CH₄ emissions. This work is vital to sound policy decisions concerning power generation, coal, and agriculture and forestry at the national level.