Genotoxic effects of Bismuth (III) oxide nanoparticles by Allium and Comet assay

Genotoxic effects of Bismuth (III) oxide nanoparticles (BONPs) were investigated on the root cells of Allium cepa by Allium and Comet assay. A. cepa roots were treated with the aqueous dispersions of BONPs at five different concentrations (12.5, 25, 50, 75, and 100 ppm) for 4 h. Exposure of BONPs significantly increased mitotic index (MI) except 12.5 ppm, total chromosomal aberrations (CAs) in Allium test. While stickiness chromosome laggards, disturbed anaphase–telophase and anaphase bridges were observed in anaphase–telophase cells, pro-metaphase and c-metaphase in other cells. A significant increase in DNA damage was also observed at all concentrations of BONPs except 12.5 ppm by Comet assay. The results were also analyzed statistically by using SPSS for Windows; Duncan’s multiple range test was performed. These results indicate that BONPs exhibit genotoxic activity in A. cepa root meristematic cells.     

DNA integrity of onion root cells under catechol influence

Catechol is a highly toxic organic pollutant, usually abundant in the waste effluents of industrial processes and agricultural activities. The environmental sources of catechol include pesticides, wood preservatives, tanning lotion, cosmetic creams, dyes, and synthetic intermediates. Genotoxicity of catechol at a concentration range 5?×?10^?1–5 mM was evaluated by applying random amplified polymorphic DNA (RAPD) and time-lapse DNA laddering tests using onion (Allium cepa) root cells as the assay system. RAPD analysis revealed polymorphisms in the nucleotidic sequence of DNA that reflected the genotoxic potential of catechol to provoke point mutations, or deletions, or chromosomal rearrangements. Time-lapse DNA laddering test provided evidence that catechol provoked DNA necrosis and apoptosis. Acridine orange/ethidium bromide staining could distinguish apoptotic from necrotic cells in root cells of A. cepa.     

Fast determination of sulfonamides and their acetylated metabolites from environmental water based on magnetic molecularly imprinted polymers

Group-selective magnetic molecularly imprinted polymers (MMIPs) that can extract four widely used sulfonamide antibiotics and their acetylated metabolites from environmental water were synthesized in this study. The MMIPs with saturation magnetization value of 16.7 emu g^-1 could be separated from the environmental water samples easily by the application of an adscititious magnetic field, reducing the time consumption of pretreatment. The extraction conditions were evaluated, and optimal extraction conditions were as follows: extraction time, 25 min; amount of polymers, 90 mg; washing solvent, 30 % methanol aqueous solution; and elution solvent, methanol–acetic acid (95:5, v/v). The target analytes were detected by liquid chromatography–tandem mass spectrometry, and the detection limits of the method are in the range of 0.38–1.32 ng L^-1. The relative standard deviations of intra- and inter-day are in the range of 1.3–6.8 % and 1.7–9.1 %, respectively. The proposed method is suitable for the analysis of environmental water samples.     

Enhanced reduction of phenol content and toxicity in olive mill wastewaters by a newly isolated strain of Coriolopsis gallica

The search for novel microorganisms able to degrade olive mill wastewaters (OMW) and withstand the toxic effects of the initially high phenolic concentrations is of great scientific and industrial interest. In this work, the possibility of reducing the phenolic content of OMW using new isolates of fungal strains (Coriolopsis gallica, Bjerkandera adusta, Trametes versicolor, Trichoderma citrinoviride, Phanerochaete chrysosporium, Gloeophyllum trabeum, Trametes trogii, and Fusarium solani) was investigated. In vitro, all fungal isolates tested caused an outstanding decolorization of OMW. However, C. gallica gave the highest decolorization and dephenolization rates at 30 % v/v OMW dilution in water. Fungal growth in OMW medium was affected by several parameters including phenolic compound concentration, nitrogen source, and inoculum size. The optimal OMW medium for the removal of phenolics and color was with the OMW concentration (in percent)/[(NH₄)₂SO₄]/inoculum ratio of 30:6:3. Under these conditions, 90 and 85 % of the initial phenolic compounds and color were removed, respectively. High-pressure liquid chromatography analysis of extracts from treated and untreated OMW showed a clear and substantial reduction in phenolic compound concentrations. Phytotoxicity, assessed using radish (Raphanus sativus) seeds, indicated an increase in germination index of 23–92 % when a 30 % OMW concentration was treated with C. gallica in different dilutions (1/2, 1/4, and 1/8).

Distinctive effects of nano-sized permethrin in the environment

Pesticides are an essential tool in integrated pest management. Nanopermethrin was prepared by solvent evaporation from an oil-in-water volatile microemulsion. The efficacy of the formulated nanopermethrin was tested against Aedes aegypti and the results compared to those of regular, microparticular permethrin. The 24 h LC₅₀ for nanopermethrin and permethrin was found to be 0.0063 and 0.0199 mg/L, respectively. The formulated nanopermethrin was tested for toxicity against non-target organisms. Nanopermethrin did not show antibacterial activity against Escherichia coli (ATCC 13534 and 25922) or against Bacillus subtilis. Phytotoxicity studies of nanopermethrin to the seeds of Lycopersicum esculentum, Cucumis sativus, and Zea mays showed no restraint in root length and germination percentage. In the Allium cepa test, regular microparticular permethrin treatment of 0.13 mg/L showed a mitotic index (MI) of 46.8 % and chromosomal aberration of 0.6 %, which was statistically significant (p?<?0.05) compared to control. No significant differences were observed in 0.13 mg/L nanopermethrin exposure as compared to control (MI of 52.0 and 55.03 % and chromosomal aberration of 0.2 and 0 %, respectively). It was concluded that formulated nanopermethrin can be used as a safe and effectual alternative to commercially available permethrin formulation in agricultural practices.     

Semi-specific Microbacterium phyllosphaerae-based microbial sensor for biochemical oxygen demand measurements in dairy wastewater

Although the long incubation time of biochemical oxygen demand (BOD₇) measurements has been addressed by the use of microbial biosensors, the resulting sensor-BOD values gained from the measurements with specific industrial wastewaters still underestimates the BOD value of such samples. This research aims to provide fast and more accurate BOD measurements in the dairy wastewater samples. Unlike municipal wastewater, wastewater from the dairy industry contains many substrates that are not easily accessible to a majority of microorganisms. Therefore, a bacterial culture, Microbacterium phyllosphaerae, isolated from dairy wastewater was used to construct a semi-specific microbial biosensor. A universal microbial biosensor based on Pseudomonas fluorescens, which has a wide substrate spectrum but is nonspecific to dairy wastewater, was used as a comparison. BOD biosensors were calibrated with OECD synthetic wastewater, and experiments with different synthetic and actual wastewater samples were carried out. Results show that the semi-specific M. phyllosphaerae-based microbial biosensor is more sensitive towards wastewaters that contain milk derivates and butter whey than the P. fluorescens-based biosensor. Although the M. phyllosphaerae biosensor underestimates the BOD₇ value of actual dairy wastewaters by 25–32 %, this bacterial culture is more suitable for BOD monitoring in dairy wastewater than P. fluorescens, which underestimated the same samples by 46–61 %.     

Use of hairy roots extracts for 2,4-DCP removal and toxicity evaluation by Lactuca sativa test

2,4-Dichlorophenol (2,4-DCP) is widely distributed in wastewaters discharged from several industries, and it is considered as a priority pollutant due to its high toxicity. In this study, the use of different peroxidase extracts for 2,4-DCP removal from aqueous solutions was investigated. Tobacco hairy roots (HRs), wild-type (WT), and double-transgenic (DT) for tomato basic peroxidases (TPX1 and TPX2) were used to obtain different peroxidase extracts: total peroxidases (TPx), soluble peroxidases (SPx), and peroxidases ionically bound to the cell wall (IBPx). All extracts derived from DT HRs exhibited higher peroxidase activity than those obtained from WT HRs. TPx and IBPx DT extracts showed the highest catalytic efficiency values. The optimal conditions for 2,4-DCP oxidation were pH 6.5, H₂O₂ 0.5 mM, and 200 U mL^?1 of enzyme, for all extracts analyzed. Although both TPx extracts were able to oxidize different 2,4-DCP concentrations, the removal efficiency was higher for TPx DT. Polyethylene glycol addition slightly improved 2,4-DCP removal efficiency, and it showed some protective effect on TPx WT after 2,4-DCP oxidation. In addition, using Lactuca sativa test, a reduction of the toxicity of post removal solutions was observed, for both TPx extracts. The results demonstrate that TPx extracts from both tobacco HRs appear to be promising candidate for future applications in removing 2,4-DCP from wastewaters. This is particularly true considering that these peroxidase sources are associated with low costs and are readily available. However, TPx DT has increased peroxidase activity, catalytic efficiency, and higher removal efficiency than TPx WT, probably due to the expression of TPX1 and TPX2 isoenzymes.     

Health care industries: potential generators of genotoxic waste

Health care waste includes all the waste generated by health care establishments, research facilities, and laboratories. This constitutes a variety of chemical substances, such as pharmaceuticals, radionuclides, solvents, and disinfectants. Recently, scientists and environmentalists have discovered that wastewater produced by hospitals possesses toxic properties due to various toxic chemicals and pharmaceuticals capable of causing environmental impacts and even lethal effects to organisms in aquatic ecosystems. Many of these compounds resist normal wastewater treatment and end up in surface waters. Besides aquatic organisms, humans can be exposed through drinking water produced from contaminated surface water. Indeed, some of the substances found in wastewaters are genotoxic and are suspected to be potential contributors to certain cancers. The aim of this study was to evaluate the genotoxic and cytotoxic potential of wastewaters from two hospitals and three clinical diagnostic centers located in Jaipur (Rajasthan State), India using the prokaryotic Salmonella mutagenicity assay (Ames assay) and the eukaryotic Saccharomyces cerevisiae respiration inhibition assay. In the Ames assay, untreated wastewaters from both of the health care sectors resulted in significantly increased numbers of revertant colonies up to 1,000–4,050 as measured by the Salmonella typhimurium TA98 and TA100 strains (with and without metabolic activation) after exposure to undiluted samples, which indicated the highly genotoxic nature of these wastewaters. Furthermore, both hospital and diagnostic samples were found to be highly cytotoxic. Effective concentrations at which 20 % (EC₂₀) and 50 % (EC₅₀) inhibition of the respiration rate of the cells occurred ranged between ～0.00 and 0.52 % and between 0.005 and 41.30 % (calculated with the help of the MS excel software XLSTAT 2012.1.01; Addinsoft), respectively, as determined by the S. cerevisiae assay. The results indicated that hospital wastewaters contain genotoxic and cytotoxic components. In addition, diagnostic centers also represent small but significant sources of genotoxic and cytotoxic wastes.     

Environmental risk appraisement of disinfection by-products (DBPs) in plant model system: Allium cepa

The organic toxicants formed in chlorinated water cause potential harm to human beings, and it is extensively concentrated all over the world. Various disinfection by-products (DBPs) occur in chlorinated water are genotoxic and carcinogenic. The toxicity is major concern for chlorinated DBPs which has been present more in potable water. The purpose of the work was to evaluate genotoxic properties of DBPs in Allium cepa as a plant model system. The chromosomal aberration and DNA laddering assays were performed to examine the genotoxic effect of trichloroacetic acid (TCAA), trichloromethane (TCM), and tribromomethane (TBM) in a plant system with distinct concentrations, using ethyl methanesulfonate (EMS) as positive control and tap water as negative control. In Allium cepa root growth inhibition test, the inhibition was concentration dependent, and EC₅₀ values for trichloroacetic acid (TCAA), trichloromethane (TCM), and tribromomethane (TBM) were 100 mg/L, 160 mg/L, and 120 mg/L respectively. In the chromosome aberration assay, root tip cells were investigated after 120 h exposure. The bridge formation, sticky chromosomes, vagrant chromosomes, fragmented chromosome, c-anaphase, and multipolarity chromosomal aberrations were seen in anaphase–telophase cells. It was noticed that with enhanced concentrations of DBPs, the total chromosomal aberrations were more frequent. The DNA damage was analyzed in roots of Allium cepa exposed with DBPs (TCAA, TCM, TBM) by DNA laddering. The biochemical assays such as lipid peroxidation, H₂O₂ content, ascorbate peroxidase, guaiacol peroxidase, and catalase were concentration dependent. The DNA interaction studies were performed to examine binding mode of TCAA, TCM, and TBM with DNAs. The DNA interaction was evaluated by spectrophotometric and spectrofluorometric studies which revealed that TCAA, TCM, and TBM might interact with Calf thymus DNA (CT- DNA) by non-traditional intercalation manner.

     

Biosorption and biodegradation of Acid Orange 7 by Enterococcus faecalis strain ZL: optimization by response surface methodological approach

Reactive dyes account for one of the major sources of dye wastes in textile effluent. In this study, decolorization of the monoazo dye, Acid Orange 7 (AO7) by the Enterococcus faecalis strain ZL that isolated from a palm oil mill effluent treatment plant has been investigated. Decolorization efficiency of azo dye is greatly affected by the types of nutrients and the size of inoculum used. In this work, one-factor-at-a-time (method and response surface methodology (RSM) was applied to optimize these operational factors and also to study the combined interaction between them. Analysis of AO7 decolorization was done using Fourier transform infrared (FTIR) spectroscopy, desorption study, UV–Vis spectral analysis, field emission scanning electron microscopy (FESEM), and high performance liquid chromatography (HPLC). The optimum condition via RSM for the color removal of AO7 was found to be as follows: yeast extract, 0.1 %?w/v, glycerol concentration of 0.1 %?v/v, and inoculum density of 2.5 %?v/v at initial dye concentration of 100 mg/L at 37 °C. Decolorization efficiency of 98 % was achieved in only 5 h. The kinetic of AO7 decolorization was found to be first order with respect to dye concentration with a k value of 0.87/h. FTIR, desorption study, UV–Vis spectral analysis, FESEM, and HPLC findings indicated that the decolorization of AO7 was mainly due to the biosorption as well as biodegradation of the bacterial cells. In addition, HPLC analyses also showed the formation of sulfanilic acid as a possible degradation product of AO7 under facultative anaerobic condition. This study explored the ability of E. faecalis strain ZL in decolorizing AO7 by biosorption as well as biodegradation process.     

Rapid determination of trace dicyandiamide in mussels from Zhejiang coast by ultra-fast liquid chromatography–tandem mass spectrometry with isotope internal standard dilution technique

In this study, a rapid and accurate ultra-fast liquid chromatography–tandem quadrupole mass spectrometry (UFLC–MS/MS) method coupled with the isotope internal standard dilution technique was established and validated to determine trace dicyandiamide (DCD) in mussels. The sample was extracted by acetonitrile, and chromatographic separations were performed on an Acquity UPLC BEH Amide column by using water–acetonitrile (9:91, v/v) as the mobile phase within 3 min. DCD was determined by using DCD-¹⁵N₄ as an internal standard. The results showed that the recoveries were between 96.2 and 103 % with relative standard deviations (RSDs) in the range of 0.6–6.0 %. The limit of quantification (LOQ) was 0.05 μg/kg. This method can be applied to the routine analysis for the rapid and sensitive determination of trace DCD in mussels. Overall, the data reiterate the importance of investigating the presence of DCD in marine biological samples, which can act as food quality controls for human health.     

Characterization of extracellular polymeric substances (EPS) from periphyton using liquid chromatography-organic carbon detection–organic nitrogen detection (LC-OCD-OND)

A protocol was developed to extract, fractionate, and quantitatively analyze periphyton extracellular polymeric substances (EPS), which obtains both information on the molecular weight (M _r) distribution and protein and polysaccharide content. The EPS were extracted from freshwater periphyton between July and December 2011. Organic carbon (OC) compounds from different EPS extracts were analyzed using liquid chromatography-organic carbon detection–organic nitrogen detection (LC-OCD-OND), and total protein and polysaccharide content were quantified. Four distinct OC fractions, on the basis of M _r, were identified in all extracts, corresponding to high M _r biopolymers (≥80–4 kDa), degradation products of humic substances (M _r not available), low M _r acids (10–0.7 kDa), and small amphiphilic/neutral compounds (3–0.5 kDa). Low C/N ratios (4.3?±?0.8) were calculated for the biopolymer fractions, which represented 16–38 % of the measured dissolved organic carbon (DOC), indicating a significant presence of high M _r proteins in the EPS. Protein and polysaccharide represented the two major components of EPS and, when combined, accounted for the measured DOC in extracts. Differences in specific OC fractions of EPS extracts over the course of the study could be quantified using this method. This study suggests that LC-OCD-OND is a new valuable tool in EPS characterization of periphyton.     

Environmental monitoring of alcohol sulfates and alcohol ethoxysulfates in marine sediments

The study describes the environmental monitoring of anionic surfactants―alcohol sulfates (AS) and alcohol ethoxysulfates (AES)—in marine sediments. Concentration values were obtained after pressurised liquid extraction (PLE) and liquid chromatography–tandem mass spectrometry analysis (LC–MS/MS). Samples were collected from a range of wastewater discharge points along the coast of the provinces of Huelva, Málaga, Granada and Almería. Urban, agricultural and industrial wastewaters are discharged at the selected 38 sampling sites. Principal component analysis was carried out in order to evaluate the distribution and behaviour of these compounds in these coastal environments. Evaluation of the data revealed that the behaviour and sources of AS and AES in marine sediments are different, and that the distribution of AES depends on the length of the alkyl chain, while the number of ethoxylated units is not relevant. Additionally, the 38 sampling sites can be grouped into only two types of outfalls according to their AS distribution. The concentration of compounds in sediment samples ranged from 7.52 to 13.50 mg kg^?1 for AS, from 3.04 to 10.68 mg kg^?1 for AES–C₁₂E_x and from 3.83 to 11.56 mg kg^?1 for AES–C₁₄E_x.     

Genotoxic assessment on river water using different biological systems

This paper reports genotoxicity and toxicity data in water samples collected in Sinos River, an important water course in the hydrographic region of Guaíba Lake, Rio Grande do Sul State, south of Brazil. This river is exposed to intense anthropic influence by numerous shoes, leather, petrochemical, and metallurgy industries. Water samples were collected at two moments (winter 2006 and spring 2006) at five sites of Sinos River and evaluated using in vitro V79 Chinese hamster lung fibroblasts (cytotoxicity, comet assay and micronucleus test) and Allium cepa test (toxicity and micronucleus test). Comet and micronucleus tests revealed that water samples collected exerted cytotoxic, toxic, genotoxic and mutagenic effects. The results showed the toxic action of organic and inorganic agents found in the water samples in all sites of Sinos River, for both data collections. The main causes behind pollution were the domestic and industrial toxic discharges. The V79 and A. cepa tests were proved efficient to detect toxicity and genotoxicity caused by complex mixtures. This study also showed the need for constant monitoring in sites with strong environmental degradation caused by industrial discharges and urban sewages.     

Sorption of the herbicides diquat and difenzoquat from aqueous medium by polymeric resins in the presence of sodium dodecylsulfate: Kinetic and mechanistic study

The goal of this work was to propose a novel method for the solid-phase extraction of the herbicides diquat (DQT²⁺) and difenzoquat (DFQT⁺) from aqueous medium using polymeric Amberlite XAD-2 and XAD-4 resins in the presence of sodium dodecylsulfate (SDS). The addition of SDS to the medium was of fundamental importance in order to allow the formation of a negatively charged surface able to sorb the cationic solutes. Several factors that could influence the sorption process, such as SDS concentration in the medium, sorbent mass, pH, ionic strength, and initial concentration of the solutes were investigated. Kinetic studies were also performed to model the system and to identify the mechanisms that operate the sorption process of the herbicides. SDS concentration in the medium presented remarkable influence on the extraction efficiency, achieving maximum values when the ratios [SDS]/[herbicide] were approximately 90, for XAD-2, and 22 and 11 for DQT²⁺ and DFQT⁺, respectively, for XAD-4. The sorption process followed a pseudo second-order kinetic in all cases studied. It was also found that an intraparticle diffusion process controlled exclusively the sorption of the herbicides by the Amberlite XAD-2 and XAD-4 resins in the first 15 min, becoming less active with time.     

Removal of xylenol orange from its aqueous solution using SDS self-microemulsifying systems: optimization by Box–Behnken statistical design

The aim of present study was to develop and evaluate sodium dodecyl sulfate (SDS) self-microemulsifying systems (SMES) for the removal of an anionic dye xylenol orange (XO) from its bulk aqueous media via liquid–liquid adsorption. The composition of SDS SMES was optimized by Box–Behnken statistical design for the maximum removal of XO from its aqueous solution. Various SDS formulations were prepared by spontaneous emulsification method and characterized for thermodynamic stability, self-microemulsification efficiency, droplet size, and viscosity. Adsorption studies were conducted at 8, 16, and 24 h by mixing small amounts of SDS formulations with relatively large amounts of bulk aqueous solution of XO. Droplet size and viscosity of SDS formulations were significantly influenced by oil phase concentration (triacetin), while surfactant concentration had little impact on droplet size and viscosity. However, the percentage of removal of XO was influenced by triacetin concentration, surfactant concentration, and adsorption time. Based on lowest droplet size (35.97 nm), lowest viscosity (29.62 cp), and highest percentage of removal efficiency (89.77 %), formulation F₁₄, containing 2 % w/w of triacetin and 40 % w/w of surfactant mixture (20 % w/w of SDS and 20 % w/w of polyethylene glycol 400), was selected as an optimized formulation for the removal of XO from its bulk aqueous media after 16 h. These results indicated that SDS SMES could be suitable alternates of solid–liquid adsorption for the removal of toxic dyes such as XO from its aqueous solution through liquid–liquid adsorption.     

Copper ultrastructural localization, subcellular distribution, and phytotoxicity in Hydrilla verticillata (L.f.) Royle

Laboratory experiments were conducted to investigate copper (Cu) subcellular distribution and toxicity in Hydrilla verticillata. Fronds were subjected to different concentrations (15, 75, and 150 μM) of Cu for 7 days. Cu grains were found in cell walls, plasmodesmata, and within the nuclei and chloroplasts using the autometallographic technique. Subcellular fractionation of Cu-containing tissues indicated that in leaves subjected to high Cu concentrations, 59–65 % of the element was located in the cell wall fraction, followed by cell organelles (21–30 %) and the soluble fraction (10–14 %). The levels of K, P, Zn, and Mg declined under all Cu concentrations, but Ca, Mn, and Fe contents reached their peak at 15 μM Cu and decreased thereafter. F _v/F _m, F ₀, and F _m fell significantly in line with the decrease in pigment content. Cu exposure also caused significant damage to the chloroplasts, mitochondria, and nuclei, including disintegration of the chloroplasts and vacuolization of the mitochondria and nuclei, all of which suggested that Cu hastened plant senescence. The Cu maximum permissible concentration for H. verticillata was 10 μM, which was less than the existing general water quality standard. This suggested that H. verticillata could be used to assess Cu phytotoxicity.     

Effects of ammonia on methane oxidation in landfill cover materials

The effects of ammonia (NH₃) on CH₄ attenuation in landfill cover materials consisting of landfill cover soil (LCS) and aged municipal solid waste (AMSW), at different CH₄ concentrations, were investigated. The CH₄ oxidation capacities of LCS and AMSW were found to be significantly affected by the CH₄ concentration. The maximum oxidation rates for LCS and AMSW were obtained at CH₄ concentrations of 5 % and 20 %(v/v), respectively, within 20 days. CH₄ biological oxidation in AMSW was significantly inhibited by NH₃ at low CH₄ concentrations (5 %, v/v) but highly stimulated at high levels (20 % and 50 %, v/v). Oxidation in LCS was stimulated by NH₃ at all CH₄ concentrations due to the higher conversion of the nitrogen in NH₃ in AMSW than in LCS. NH₃ increases CH₄ oxidation in landfill cover materials.     

Determination of phenols and pharmaceuticals in municipal wastewaters from Polish treatment plants by ultrasound-assisted emulsification–microextraction followed by GC–MS

A method combining ultrasound-assisted emulsification–microextraction (USAEME) with gas chromatography–mass spectrometry (GC–MS) was developed for simultaneous determination of four acidic pharmaceuticals, ibuprofen, naproxen, ketoprofen, and diclofenac, as well as four phenols, 4-octylphenol, 4-n-nonylphenol, bisphenol A, and triclosan in municipal wastewaters. Conditions of extraction and simultaneous derivatization were optimized with respect to such aspects as type and volume of extraction solvent, volume of derivatization reagent, kind and amount of buffering salt, location of the test tube in the ultrasonic bath, and extraction time. The average correlation coefficient of the calibration curves was 0.9946. The LOD/(LOQ) values in influent and effluent wastewater were in the range of 0.002–0.121/(0.005–0.403) μg L^?1 and 0.002–0.828/(0.006–2.758) μg L^?1, respectively. Quantitative recoveries (≥94 %) and satisfactory precision (average RSD 8.2 %) were obtained. The optimized USAEME/GC–MS method was applied for determination of the considered pharmaceuticals and phenols in influents and treated effluents from nine Polish municipal wastewater treatment plants. The average concentration of acidic pharmaceuticals in influent and effluent wastewater were in the range of 0.06–551.96 μg L^?1 and 0.01–22.61 μg L^?1, respectively, while for phenols were in the range of 0.03–102.54 μg L^?1 and 0.02–10.84 μg L^?1, respectively. The removal efficiencies of the target compounds during purification process were between 84 and 99 %.     

BOD biosensors for pulp and paper industry wastewater analysis

Introduction

Two semi-specific microbial biosensors were constructed for the analysis of biochemical oxygen demand (BOD) in high-cellulose-content pulp and paper industry wastewaters. The biosensors were based on living cells of Bacillus subtilis and Paenibacillus sp. immobilized in an agarose gel matrix. Semi-specific microorganisms were isolated from various samples (decaying sawdust and rabbit manure) and were chosen based on their ability to assimilate cellulose.

Materials &; methods

The biosensors were calibrated with the Organization for Economic Cooperation and Development synthetic wastewater, and measurements with different wastewaters were conducted.

Results

The response time of biosensors using the steady-state method was 20?C25 min, and the service life of immobilized microorganisms was 96 days. Detection limit was 5 mg/l of BOD₇ while linear ranges extended up to 55 and 50 mg/l of the BOD₇ for B. subtilis- and Paenibacillus sp.-based biosensors, respectively. Repeatability and reproducibility of both biosensors were within the limits set by APHA??less than 15.4%. In comparison, both biosensors overestimated the BOD₇ values in paper mill wastewaters and underestimated the BOD₇ in aspen pulp mill wastewater.

Conclusions

The semi-specific biosensors are suitable for the estimation of organic pollution derived from cellulose, while the detection of pollution derived from tannins and lignins was minor. Better results in terms of accuracy and repeatability were gained with Paenibacillus sp. biosensor.