PCDDs and PCDFs in sewage sludge, river and lake sediments from south west Germany

Sewage sludges and sediments of rivers and lakes are sinks for “persistent” organic compounds entering the environment. These matrices are therefore useful in the assessment of local and global pollution with certain compounds or classes of compounds. In recent years we have analyzed sediments of the rivers Neckar, Rhine, and Danube, from Lake Constance, and samples of sewage sludge from municipal waste water treatment plants of south-west Germany for PAH, phthalates, organochlorine pesticides, and PCBs. ¹ We have now analyzed a number of these samples for PCDDs and PCDFs. Isomer-specific analyses for 2,3,7,8-subsituted PCDDs/PCDFs were carried out in all cases.

In all samples PCDDs could be detected, and in most cases PCDFs as well. 2,3,7,8-TCDD was never detected at a detection limit of 0.01 ppb. In sediments (14 samples) the total PCDDs ranged from 0.1 to 2.9 ppb and PCDFs from “not detectable” to 1.2 ppb. The highest concentration for a 2,3,7,8-substituted PCDD^* was found for 1,2,3,6,7,8-hexaCDD with 0.06 ppb. In sewage sludges (15 samples) the total PCDDs ranged from 4 to 65 ppb and PCDFs from 1 to 7 ppb. The highest concentration for a 2,3,7,8-substituted PCDD^* was found for 1,2,3,6,7,8-hexaCDD with 0.57 ppb.

Comparison of PCDD/PCDF patterns of congeners and isomers for the sewage sludge and river sediment samples with those of stack gas emissions of waste incinerators and of pentachlorophenol allows the conclusion that the main source of PCDDs and PCDFs found in these samples is pentachlorophenol. Results of the Lake Constance sediment core indicate that here the atmospheric immission from waste incineration might be predominant.     

Formation of dioxins from combustion of polyvinylidene chloride in a well-controlled incinerator

Polyvinylidene chloride (PVDC; polymer of 1,1-dichloroethylene) was combusted with paper in a well-controlled, small-scale incinerator at an average grate temperature of 700 °C, and then dioxins (PCDDs, PCDFs, and coplanar-PCBs) formed in the exhaust gases were analyzed by gas chromatography/mass spectrometry. PVDC lowered the combustion temperature due to its less flammable character. The amount of total dioxins (PCDDs + PCDFs + coplanar-PCBs) formed in the exhaust gas was 58.0 ng/g of a combustion sample and its toxicity equivalency quantity (TEQ) value was 0.64 ng-TEQ/g. The amount of PCDDs formed in the sample ranged from 2.33 ng/g (Cl₈-isomer) to 0.048 ng/g (Cl₁-isomer). The lower the number of chloride, the less production of PCDDs. On the other hand, there was no relation between the number of chloride and PCDF formation. The amount of PCDFs formed in the sample ranged from 8.02 ng/g (Cl₂-isomer) to 4.46 ng/g (Cl₈-isomer). A polyvinylchloride (PVC) sample produced 207 ng/g of total dioxins and a PVDC sample produced 57.4 ng/g of total dioxins when they were combusted under the same conditions. An approximately equal composition of dioxin isomers was formed from PVDC and PVC samples. Paper was found to contribute to PCDF formation when it was combusted with plastics.     

Comparison of various sampling methods for PCDDs and PCDFs in stack gas

There have been discussions about how complete PCDDs and PCDFs are sampled from stack gas of waste combustion plants by various sampling methods. In Germany, at present, a sampling method is used, which was first proposed by Nottrodt et al.¹, consisting of a filter device, condenser, and an absorption train. Since this sampling procedure complicates sampling and analysis, we compared this “standard procedure” with a “dilution method”, where only a filter, impregnated with paraffin, is used as trapping device, and also tested the effectiveness of XAD-2 as an adsorption trap.

As standard procedure the standard train was always used in parallel to other sampling methods. The results of four parallel sampling periods confirmed, that comparable results are obtained, when parallel sampling is carried out with the standard train.

The result of our investigation can be summarized as follows: The total emission of PCDDs and PCDFs determined by different sampling procedures varies only insignificantly. This means that sampling and analysis for PCDDs and PCDFs in stack gas could be simplified considerably.     

Levels, profile and pattern of PCDDs and PCDFs in samples related to the production and use of chlorine

Analyses of sludge from graphite electrodes used in the chloralkali process show total levels of PCDFs as high as 650000 pg/g sludge. The levels of tetra-, penta-and hexaCDFs were found to be approximately the same. The levels for the corresponding PCDDs were below the detection level. The dominating congeners within each group are the toxic 2,3,7,8-substituted PCDFs at levels of 340000 pg/g, This typical pattern, called the “chloralkali pattern” can also be found in soil samples taken at another chloralkali plant. The typical pattern can also be identified in a solution of ferric chloride. Traces of “chloralkali pattern” are identified in a sludge sample from the drinking water purification plant, the source for PCDFs in the sludge is unknown.     

Chlorinated naphthalene formation from the oxidation of dichlorophenols

Polychlorinated naphthalenes (PCNs) formed along with dibenzo-p-dioxin and dibenzofuran products in the slow combustion of dichlorophenols (DCPs) at 600 degrees C were identified. Each DCP reactant produced a unique set of PCN products. Major PCN congeners observed in the experiments were consistent with products predicted from a mechanism involving an intermediate formed by ortho-ortho carbon coupling of phenoxy radicals; polychlorinated dibenzofurans (PCDFs) are formed from the same intermediate. Tautomerization of the intermediate and H2O elimination produces PCDFs; alternatively, CO elimination to form dihydrofulvalene and fusion produces naphthalenes. Only trace amounts of tetrachloronaphthalene congeners were formed, suggesting that the preferred PCN formation pathways from chlorinated phenols involve loss of chlorine. 3,4-DCP produced the largest yields of PCDF and PCN products with two or more chlorine substituents. 2,6-DCP did not produce tri- or tetra-chlorinated PCDF or PCN congeners. It did produce 1,8-DCN, however, which could not be explained.     

Decomposition of chlorinated dioxins, odourous compounds and NOx from MSW incineraton plant by oxidizing catalyst

An experiment was carried out to decompose chlorinated dioxins (PCDDs, PCDFs) Chlorobenzenes, NOx and odourous compounds (H₂S, CH₄S, C₂H₆S₂, C₈H₈, C₂H₆S, C₂H₄O, NH₃) simultaneously using a catalyst in the MSW incineration plant. The experiments were conducted at temperatures from 200°C to 400°C and from 3000h⁻¹ to 6000h⁻¹ at space velocity. A catalyst containing V₂O₅ and WO₃ on the basis of TiO₂ is used, an oxidizing catalyst of the honeycomb type. The average decomposition efficiencis were 95%, 98%, 92% for PCDDs(48CDDs), PCDFs(48CDFs) and Chlorobenzenes(36CLBs) at a reaction temperature of 350°C and a space velocity of 3000h⁻¹, more than 90% for NOx at a reactiont temperature of 300°C and more than 80% for odourous compounds at the reaction temperature of 300°C and a space velocity of 6000h⁻¹. All those compounds were decomposed successfully with increasing contact time and surface. The rate-determing step was the chemical reaction of catalyst surface.     

Effects of copper chloride on formation of polychlorinated dibenzo-p-dioxins in model waste incineration

Combustion experiments in a laboratory-scale fluidized-bed reactor were conducted to elucidate the effects of copper chloride as a catalyst on polychlorinated dibenzo-p-dioxins (PCDDs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl₂ · 2H₂O), both of which contained polyvinyl chloride as a chlorine source. Combustion temperature was set to 900 °C, and the amount of air supplied was twice the stoichiometric ratio. The experimental setup was carefully planned to suppress the influences of experimental conditions except the waste composition. Results of these experiments showed that copper chloride in the waste increased the amount of PCDDs formed and made the homologue profile to shift towards the highly chlorinated species. Copper chloride contributes to the PCDDs formation by promoting chlorination, whereby the reaction is important in that organic matter is chlorinated directly by copper compounds. Copper chloride did not exert a great influence on the isomer distribution patterns of PCDDs, while there appeared a significant difference in the case of PCDFs. This points out the difference of the major formation mechanisms between PCDDs and PCDFs. PCDDs are less formed by the catalytic reactions from carbon/polycyclic aromatic hydrocarbons than PCDFs in our experimental conditions.     

Effects of copper(II) and copper oxides on THMs formation in copper pipe

Little is known about how the growth of trihalomethanes (THMs) in drinking water is affected in copper pipe. The formation of THMs and chlorine consumption in copper pipe under stagnant flow conditions were investigated. Experiments for the same water held in glass bottles were performed for comparison. Results showed that although THMs levels firstly increased in the presence of chlorine in copper pipe, faster decay of chlorine as compared to the glass bottle affected the rate of THMs formation. The analysis of water phase was supplemented by surface analysis of corrosion scales using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDX). The results showed the scales on the pipe surface mainly consisted of Cu₂O, CuO and Cu(OH)₂ or CuCO₃. Designed experiments confirmed that the fast depletion of chlorine in copper pipe was mainly due to effect of Cu₂O, CuO in corrosion scales on copper pipe. Although copper(II) and copper oxides showed effect on THMs formation, the rapid consumption of chlorine due to copper oxide made THM levels lower than that in glass bottles after 4 h. The transformations of CF, DCBM and CDBM to BF were accelerated in the presence of copper(II), cupric oxide and cuprous oxide. The effect of pH on THMs formation was influenced by effect of pH on corrosion of copper pipe. When pH was below 7, THMs levels in copper pipe was higher as compared to glass bottle, but lower when pH was above 7.     

Status of the PCDD and PCDF contamination of commercial milk caused by milk cartons

Within the scope of this study, possible migration of polychlorinated dibenzodioxins and -furans (PCDDs/PCDFs) from cartons (produced using bleached cardboard) into cow's milk was investigated. Three different types of carton were examined. The milk samples were taken at different times of storage and analysed for PCDDs/PCDFs. In contrast to a similar study carried out in 1990, the I-TEQ-results of all cartons analysed may be considered very low. No significant migration of toxic (2,3,7,8-chlorine-substituted) PCDDs/PCDFs could be observed. This is due to the very low PCDD/PCDF concentrations in modern cardboards as a result of the elemental chlorine-free (ECF) bleaching processes used. As far as the milk samples are concerned, no influence of the cardboards (according to the I-TEQ data) could be ascertained. I-TEQ concentrations in milk did not noticeably change during storage times of three, six and eight days. The I-TEQ-data obtained for all milk samples was found to be in the range typical of background concentrations in cow's milk in Germany. Although 1,2,7,8-TCDF is not included in the calculation of the TEQ (no 2,3,7,8-chlorine-substitution), analysis of this congener in cardboard samples was also carried out as a matter of general interest for cardboard investigations and an indicator of pulp bleaching with free chlorine.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in invertebrate animals from a rural beach in Japan

PCDDs and PCDFs were analyzed by high resolution GC MS in several invertebrate animals collected from a rural beach in Japan. PCDDs and PCDFs were detected in all samples. Total concentration of PCDDs and PCDFs ranged 8.8–120 pg g⁻¹ wet and 3.5–38 pg g⁻¹ wet, respectively. TEQs of invertebrate animals examined ranged from 0.048 pg g⁻¹ wet in sea slug to 0.91 pg g⁻¹ wet in mussel. Isomer profiles in all samples were similar to each other despite of variety of species. Their major sources are estimated to be herbicides such as CNP and PCP, and combustion by using a statistical analysis of isomer profiles.     

Photodegradation of malachite green under natural sunlight irradiation: kinetic and toxicity of the transformation products

This article describes the photolytic degradation of malachite green (MG), a cationic triphenylmethane dye used worldwide as a fungicide and antiseptic in the aquaculture industry. Photolysis experiments were performed by direct exposure of a solution of MG in water to natural sunlight. The main transformation products (TPs) generated during the process were identified by liquid chromatography time-of-flight mass spectrometry (LC–TOF-MS) and gas chromatography mass spectrometry (GC–MS). The 28 TPs identified with this strategy indicate that MG undergoes three main reactions, N-demethylation, hydroxylation and cleavage of the conjugated structure forming benzophenone derivatives. These processes involve hydroxyl radical attack on the phenyl ring, the N,N-dimethylamine group and the central carbon atom. The Vibrio fischeri acute toxicity test showed that the solution remains toxic after MG has completely disappeared. This toxicity could be assigned, at least in part, to the formation of 4-(dimethylamine)benzophenone, which has an EC_50,30 min of 0.061 mg l⁻¹, and is considered “very toxic to aquatic organisms” by current EU legislation.     

The influence of level and chlorine source on the formation of mono- to octa-chlorinated dibenzo-p-dioxins, dibenzofurans and coplanar polychlorinated biphenyls during combustion of an artificial municipal waste

The formation of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and the three coplanar polychlorinated biphenyls (pPCBs) was studied during labscale fludized bed combustion of eight artificial municipal solid waste (MSW) fuel mixtures. The level of chlorine as well as the chlorine source varies within the different fuel mixtures. Four different chlorine sources were studied, viz, an inorgnaic (NaCl) and three organic sources, pure PVC plastic and two products (floor and cable) and the total chlorine level varies between 0.28% and 1.1%. The experiments were performed in a 5 kW laboratory scale fluidized bed reactor. A correlation between the total chlorine in the fuel and the formation of the hepta- and octa-chlorinated PCDD/F homologues was found. However, the most important variable for changes in the PCDDs/Fs and pPCBs formation was disturbance in the combustion condition and not the variation in chlorine content of the fuel. Furthermore, no differences in formation between the chlorine sources could be seen.     

Effects of copper chloride on formation of polychlorinated dibenzofurans in model waste incineration in a laboratory-scale fluidized-bed reactor

Combustion experiments in a laboratory-scale fluidized-bed reactor have been performed to clarify the effects of copper chloride as a catalyst on polychlorinated dibenzofurans (PCDFs) formation in municipal waste incineration. We used model wastes with and without copper chloride (CuCl2 x 2H2O) as a catalyst, both of which contained polyvinyl chloride (PVC) as a chlorine source. Combustion temperature was set to 900 degrees C, and the amount of air supplied was twice as much as the theoretical amount. The experimental setup had been carefully planned to ensure avoidance of the influences of previous experiments. Results of these present experiments revealed that copper chloride in the waste increased the amount of PCDFs formed and made the homologue profile shifted towards the highly chlorinated species. Copper chloride contributes to PCDFs formation by promoting chlorination via catalytic reactions, whereby the reaction could be important in that organic matters are chlorinated directly by chlorinated compounds related to Deacon reaction such as copper chloride. It was elucidated that characteristic isomer distribution patterns appeared in case the waste contained copper chloride. It is probable in our experiment with copper chloride that PCDFs are mainly formed via catalytic reactions of copper compounds and carbon.     

Arsenic removal from water employing heterogeneous photocatalysis with TiO2 immobilized in PET bottles

Arsenic oxidation (As(III) to As(V)) and As(V) removal from water were assessed by using TiO₂ immobilized in PET (polyethylene terephthalate) bottles in the presence of natural sunlight and iron salts. The effect of many parameters was sequentially studied: TiO₂ concentration of the coating solution, Fe(II) concentration, pH, solar irradiation time; dissolved organic carbon concentration. The final conditions (TiO₂ concentration of the coating solution: 10%; Fe(II): 7.0 mg l⁻¹; solar exposure time: 120 min) were applied to natural water samples spiked with 500 μg l⁻¹ As(III) in order to verify the influence of natural water matrix. After treatment, As(III) and total As concentrations were lower than the limit of quantitation (2 μg l⁻¹) of the voltammetric method used, showing a removal over 99%, and giving evidence that As(III) was effectively oxidized to As(V). The results obtained demonstrated that TiO₂ can be easily immobilized on a PET surface in order to perform As(III) oxidation in water and that this TiO₂ immobilization, combined with coprecipitation of arsenic on Fe(III) hydroxides(oxides) could be an efficient way for inorganic arsenic removal from groundwaters.     

Emissions of Chlorinated Organics from Two Municipal Incinerators in Ontario

In this paper the results of sampling for trace chlorinated organics at two municipal refuse incinerators in Ontario are presented. The information may be of Interest to individuals concerned with the assessment of PCDD/PCDF (polychlorinated dibenzo-p-dioxin/polychlorinated dibenzofuran) emissions from incineration of refuse and their impact on the energyfrom- waste program. PCDDs, PCDFs, PCBs (polychlorinated biphenyls), CBs (chlorobenzenes) and CPs (chlorophenols) were quantified in all process streams including refuse, ash and stack emissions. Manual sorting of refuse and collection of ash samples were carried out simultaneously with three 24-hour continuous stack sampling tests at each plant. The results suggested that the total output of PCDDs and PCDFs varied proportionately with their input at both incinerators. However, the input of PCDDs/PCDFs could not account for their total output. The chemistry of PCDDs/PCDFs in the input and output streams were different in that only heptachlorinated and octachlorinated species were present in significant quantities in the refuse while lower chlorinated species were predominant in stack emissions and ash streams. There was no correspondence between the Input of PCBs/CBs/CPs and the output of PCDDs/PCDFs. The output of PCDDs/PCDFs, however, varied Inversely with the total output of PCBs/CBs/CPs, suggesting that the latter compounds could have been partially responsible for the formation of PCDDs and PCDFs. The PCDF emissions were also affected by combustion conditions; they were higher in magnitude and consisted of predominantly tetrachlorinated and pentachlorinated species at the plant where the combustion temperatures were lower.     

Porous cups for pesticides monitoring in soil solution — Laboratory tests

In this study, preliminary tests were conducted aiming to validate the use of ceramic porous cup for collecting soil water samples and monitoring pesticides contents, as usually made for nitrates. Interactions between porous cup and pesticides were examined under different experimental conditions for three herbicides (atrazine, isoproturon, 2,4-D) and one insecticide (carbofuran).

The results showed that ceramic was not inert for pesticides : as much as 80% of the applied pesticide could be retained during the flowing of the first tenth milliliters of solution. Interactions were attributed to sorption and “screening” of molecules by the porous walls and were related to the ionic character of pesticides. However, retention was not irreversible, since pesticides were quickly released by rinsing with distilled water.

After these tests, porous ceramic cups could be considered as suitable samplers for pesticide determinations in soil solution, contingent on gaining further informations about soil - porous cup - pesticide interactions.     

Polychlorinated dibenzo-p-dioxins and dibenzofurans in human adipose tissues of Japan

Thirteen samples of human adipose tissue from cancer patients in Japan were analyzed for tetra- to octa- chlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs). These compounds were identified in all the samples analyzed. All isomers identified have a pattern of chlorine substitution in 2, 3, 7 and 8 positions with the only exception of 1,2,3,4,6,7,9-hepta-CDD. In the case of PCDFs, the relatively higher persistency was found in the isomers with chlorine atoms at 4- (or 6-) position as compared with 1- (or 9-) position. Total PCDD concentrations were in the range of 160 to 1400 pg/g on wet weight basis, in which increasing levels were found from tetra- to octa-CDD. Total PCDF concentrations were in the range of 7 to 120 pg/g and the levels of individual congeners are rather uniform.     

Correlation of polychlorinated naphthalenes with polychlorinated dibenzofurans formed from waste incineration

Isomer composition of polychlorinated naphthalenes (PCNs) was measured for municipal waste incinerator fly ash samples and for emission samples produced from soot and copper-deposit experiments conducted at the United States Environmental Protection Agency (US-EPA). Two types of PCN isomer patterns were identified. One pattern contained specific PCN isomers in which chlorine atoms are substituted as if the peri(alpha-) position were dechlorinated from the higher chlorinated PCNs one by one. In another pattern, the isomers had a tendency for the chlorine atoms to assume successive positions on the naphthalene ring, which may be caused by specifically oriented chlorination. Some of these isomers increased, together with several polychlorinated dibenzofuran (PCDF) and a few polychlorinated dibenzo-p-dioxin (PCDD) isomers. The ratios between some specific PCN, PCDF, and PCDD isomers measured for the fly ash samples agree with those obtained from the soot and copper-deposit experiments. The observations suggest that these isomers were formed possibly from de novo synthesis utilizing the carbon structure contained in soot under the catalytic effect of a copper compound. Typical isomers for PCNs and PCDFs produced from incineration emissions were identified.     

Determination of trichloroacetic acid in environmental studies using carbon 14 and chlorine 36

Radioisotopes carbon 14 and chlorine 36 were used to elucidate the environmental role of trichloroacetic acid (TCA) formerly taken to be a herbicide and a secondary air pollutant with phytotoxic effects. However, use of ¹⁴C-labeling posed again known analytical problems, especially in TCA extraction from the sample matrix. Therefore—after evaluation of available methods—a new procedure using decarboxylation of [1,2-¹⁴C]TCA combined with extraction of the resultant ¹⁴C-chloroform with a non-polar solvent and its subsequent radiometric measurement was developed. The method solves previous difficulties and permits an easy determination of amounts between 0.4 and 20 kBq (10–500 ng g⁻¹) of carrier-less [1,2-¹⁴C]TCA in samples from environmental investigations. The procedure is, however, not suitable for direct [³⁶Cl]TCA determination in chlorination studies with ³⁶Cl. Because TCA might be microbially degraded in soil during extraction and sample storage and its extraction from soil or needles is never complete, the decarboxylation method—i.e. 2 h TCA decomposition to chloroform and CO₂ in aqueous solution or suspension in closed vial at 90 °C and pH 4.6 with subsequent CHCl₃ extraction—is recommended here, estimated V < 7%. Moreover, the influence of pH and temperature on the decarboxylation of TCA in aqueous solution was studied in a broad range and its environmental relevance is shown in the case of TCA decarboxylation in spruce needles which takes place also at ambient temperatures and might amount more than 10–20% after a growing season. A study of TCA distribution in spruce needles after below-ground uptake shows the highest uptake rate into current needles which have, however, a lower TCA content than older needle-year classes, TCA biodegradation in forest soil leads predominatingly to CO₂.     

Fenton''s type reaction and chemical pretreatment of PCBs

This study evaluates the effects of Fenton's reagent (FR) on the rate and extent of the oxidative degradation of individual mono, di-, tri- and tetrachlorobiphenyls in the commercial mixture DELOR 103, equivalent to AROCLOR 1248. The oxidation effect of FR strongly increased with increasing the molar ratio of Fe²⁺/H₂O₂. The most effective oxidation of DELOR 103 (10 μg.ml⁻¹) was achieved in a solution containing 1M H₂O₂ and 1 mM Fe²⁺. The FR elimination rate constants of PCB congeners decrease with increasing number of chlorine substituents in the biphenyl molecule and show a good correlation with the values of molecular weights of the PCB congeners and their 1-octanol/water partition coefficients.