Human intake fractions of pesticides via greenhouse tomato consumption: comparing model estimates with measurements for Captan

Human intake due to pesticide residues in food commodities can be much higher than those related to water consumption and air inhalation, stressing the importance to correctly estimate pesticide uptake into plants and predict subsequent intake by humans. We calculated the human intake fraction of captan via tomato consumption taking into account the time between pesticide application and harvest, the time between harvest and consumption, the absorption of spray deposit on plant surfaces, transfer properties through the cuticle, degradation inside the plant and loss due to food processing. Human population intake fractions due to ingestion were calculated for complete, washed and peeled tomatoes. The calculated intake fractions were compared with measurements derived from an experimental setup in a Mediterranean greenhouse. The fraction of captan applied in the greenhouse as plant treatment that eventually is ingested by the human population is on average 10(-2)-10(-5), depending on the time between pesticide application and ingestion of tomatoes and the processing step considered. Model and experimentally derived intake fractions deviated less than a factor of 2 for complete and washed tomatoes and a factor of 3 for peeled tomatoes. Intake fractions due to air inhalation and consumption of drinking water are expected to be significantly lower (5-9 orders of magnitude) than those induced by the intake of tomatoes in this case study.     

Measurements of surface contamination of spray equipment with pesticides after various methods of application

A traditional method to determine operator dermal exposure is to quantify the amount of pesticide coming into contact with specific body regions and then to integrate the deposition density values with the total body surface. It is known that extremely high deposition values may occur in the hand region; however, the source of contamination is generally assumed to be direct splash or contact with the pesticide container. One of the parameters affecting operator/pilot exposure could be the transfer of pesticide residue, particularly in the case of pesticides with a longer half-life, from contaminated surfaces of spray equipment by direct contact over extended periods. If the rate of skin absorption of pesticide is readily known, the expected values of daily dose for an operator or pilot may significantly rise due to the extended contact period. This study produced field data on the surface contamination of spray equipment used for ground and aerial applications. If field data on precise work practice (time-motion) observations are incorporated, it may be possible to estimate the potential exposure of operator/pilot due to hand contact with contaminated surfaces.     

Measurements of surface contamination of spray equipment with pesticides after various methods of application

Abstract

A traditional method to determine operator dermal exposure is to quantify the amount of pesticide coming into contact with specific body regions and then to integrate the deposition density values with the total body surface. It is known that extremely high deposition values may occur in the hand region; however, the source of contamination is generally assumed to be direct splash or contact with the pesticide container. One of the parameters affecting operator/pilot exposure could be the transfer of pesticide residue, particularly in the case of pesticides with a longer half‐life, from contaminated surfaces of spray equipment by direct contact over extended periods. If the rate of skin absorption of pesticide is readily known, the expected values of daily dose for an operator or pilot may significantly rise due to the extended contact period. This study produced field data on the surface contamination of spray equipment used for ground and aerial applications. If field data on precise work practice (time‐motion) observations are incorporated, it may be possible to estimate the potential exposure of operator/pilot due to hand contact with contaminated surfaces.     

Dissipation and residues of dimethyl disulfide in tomatoes and soil under greenhouse and open field conditions

Abstract

Tomatoes have been widely planted in greenhouses and fields in China. Soil-borne diseases are more harmful to tomatoes than other types of diseases. Dimethyl disulfide (DMDS) was used as a novel fumigant instead of methyl bromide to control soil-borne diseases. To assess the safety of DMDS for use on tomatoes, its dissipation and terminal residues were investigated at three different locations under greenhouse and open field conditions. The QuEChERS method was simplified using gas chromatography with mass spectrometry detection and combined with liquid-liquid extraction purification to allow determination of DMDS levels in both the tomatoes and the soil. The average recovery of the method was between 85.3 and 98.6%, with the relative standard deviation (RSD) ranging from to 1.9–10.3%. The dissipation and terminal residues of DMDS in the tomatoes and the soil were analyzed using the method, the results of which showed that the half-life of DMDS ranged from 0.3–6.5 d in the soil at three different locations. The terminal residues of DMDS in the tomatoes and the soil were not detected. This study provided data that the Chinese government can use to support appropriate and safe guidance for the use of DMDS on agriculture.     

Pesticide risk assessment: A study on inhalation and dermal exposure to 2,4-D and paraquat among Malaysian paddy farmers

A cross-section analytical study was conducted to evaluate the risk of pesticide exposure to those applying the Class II pesticides 2,4-D and paraquat in the paddy-growing areas of Kerian, Perak, Malaysia. It investigated the influence of weather on exposure as well as documented health problems commonly related to pesticide exposure. Potential inhalation and dermal exposure for 140 paddy farmers (handlers of pesticides) were assessed. Results showed that while temperature and humidity affected exposure, windspeed had the strongest impact on pesticide exposure via inhalation. However, the degree of exposure to both herbicides via inhalation was below the permissible exposure limits set by United States National Institute of Occupational Safety and Health (NIOSH). Dermal Exposure Assessment Method (DREAM) readings showed that dermal exposure with manual spraying ranged from moderate to high. With motorized sprayers, however, the level of dermal exposure ranged from low to moderate. Dermal exposure was significantly negatively correlated with the usage of protective clothing. Various types of deleterious health effects were detected among users of manual knapsack sprayers. Long-term spraying activities were positively correlated with increasing levels of the gamma-glutamyl transpeptidase (GGT) liver enzyme. The type of spraying equipment, usage of proper protective clothing and adherence to correct spraying practices were found to be the most important factors influencing the degree of pesticide exposure among those applying pesticides.     

Pesticide risk assessment: A study on inhalation and dermal exposure to 2,4-D and paraquat among Malaysian paddy farmers

A cross-section analytical study was conducted to evaluate the risk of pesticide exposure to those applying the Class II pesticides 2,4-D and paraquat in the paddy-growing areas of Kerian, Perak, Malaysia. It investigated the influence of weather on exposure as well as documented health problems commonly related to pesticide exposure. Potential inhalation and dermal exposure for 140 paddy farmers (handlers of pesticides) were assessed. Results showed that while temperature and humidity affected exposure, windspeed had the strongest impact on pesticide exposure via inhalation. However, the degree of exposure to both herbicides via inhalation was below the permissible exposure limits set by United States National Institute of Occupational Safety and Health (NIOSH). Dermal Exposure Assessment Method (DREAM) readings showed that dermal exposure with manual spraying ranged from moderate to high. With motorized sprayers, however, the level of dermal exposure ranged from low to moderate. Dermal exposure was significantly negatively correlated with the usage of protective clothing. Various types of deleterious health effects were detected among users of manual knapsack sprayers. Long-term spraying activities were positively correlated with increasing levels of the gamma-glutamyl transpeptidase (GGT) liver enzyme. The type of spraying equipment, usage of proper protective clothing and adherence to correct spraying practices were found to be the most important factors influencing the degree of pesticide exposure among those applying pesticides.     

The greenhouse work environment: a modifier of occupational pesticide exposure?

Abstract

Greenhouses are enclosed structures which have various characteristics that enhance crop productivity, but the implications for workers’ pesticide exposure and uptake are not well understood. A narrative literature review was conducted to explore the mechanism/s of interactions between greenhouse characteristics and occupational pesticide exposure. Using a “work”, “worker” and “workplace” conceptual framework, the greenhouse environment (hot and humid microclimate, limited space and dense crop arrangements) combines with work characteristics (high work and pesticide use intensity, multi-tasking, predominantly manual spraying techniques and quick reentry to treated farms) to potentially increase occupational pesticide exposure, compared with open field farming. Greenhouse environments, are variable but have been shown to influence pesticide availability, route, pathways and frequency of exposure, deposition and distribution on a worker’s body as well as use and performance of exposure control methods. Training programs can emphasize the differences in exposure potential between greenhouse and open field farming. Development of tailored guidelines for exposure control strategies to better suit the level of uniqueness of greenhouse agriculture seems warranted.     

Exposure assessment of operators to pesticides in Kongou,a sub-watershed of Niger River valley

The use of pesticides in horticultural sector in Niger has become an integral part of modern agriculture. Nevertheless, their inappropriate use can generate negative health effects to operators. A study was carried out among Kongou farmers in order to assess their potential dermal exposure (PDE). The UK-POEM model was used to quantify the PDE during mixing/loading and application according to the local practices. In order to determine which parts of the operator body are subject to most contamination during spraying and to validate the theoretical model used, a patch method was used with a tartrazine dye. The deposits of the tartrazine on patches were measured by colorimetry thanks to the absorbance value determined after their extraction in water and a calibration curve. A total of ten spraying trials (five trials with the hand-held sprayer and five others with the backpack sprayer) were performed by different producers at 0.5 and 1 m height for each trial. The survey shows that 92% of the farmers are illiterate and the most common active substances identified are organophosphate or pyrethroids insecticides. Seventy percent of operators do not use any personal protective equipment (PPE) during mixing/loading or spraying. The predictive systemic exposure levels vary from 0.0027?mg kg^?1 bw per day to 0.7692?mg kg^?1 bw per day for backpack sprayer and from 0.0261?mg kg^?1 bw per day to 0.9788?mg kg^?1 bw per day for hand-held sprayer, several times higher the Acceptable Operator Exposure Level (AOEL) for some actives substances. Theoretical modeling indicates more exposure of operator by a hand-held sprayer than a backpack sprayer. The patch method results show that the deposits of dye increase when the position of sprayer nozzle increases from 0.5 to 1 m for the two sprayers. All parts of the operator body are contaminated but lower body parts and chest are the most exposed. The patch method results also show that hand spraying contaminates operator more than backpack spraying, confirming the results of the theoretical model.     

Probabilistic risk assessment for personal exposure to carcinogenic polycyclic aromatic hydrocarbons in Taiwanese temples

To assess how the human exposure to airborne carcinogenic polycyclic aromatic hydrocarbons (PAHs) during working in or visiting a typical Taiwanese temple, we present a probabilistic risk model, appraised with reported empirical data. Two approaches are applied, one based on animal-derived benzo[a]pyrene (B[a]P) toxic equivalents (B[a]P(eq)) of individual PAHs and one is assumed that the potency of PAH mixtures is linked to their B[a]P level. The model integrates probabilistic exposure profiles of total-PAH and particle-bound PAH levels inside a temple from a published exploratory study with probabilistic incremental lifetime cancer risk (ILCR) models taking into account inhalation and dermal contact pathways, to quantitatively estimate the exposure risks for three age groups of adult, adolescent, and child. Risk analysis indicates that 90% probability inhalation ILCRs for three age groups have orders of magnitude around 10(-7)--10(-6); whereas for the dermal contact ILCRs ranging from 10(-5) to 10(-4), indicating high potential cancer risk. All 90% probabilities of B[a]P- and B[a]P(eq)-based total ILCRs are larger than 10(-6), indicating unacceptable probability distributions for three age groups. Sensitivity analysis indicates that to increase the accuracy of the results efforts should focus on a better definition of probability distributions for inhalation cancer slope factor, inhalation rates, and particle-bound PAH-to-skin adherence factor. We estimate risk-based visiting frequency advice for adult, adolescent, and child to a temple ranging from 5 to 7, 17 to 23, and 48 to 65 year(-1), respectively, based on an average 3h residence time.     

Human health risk assessment of lead from mining activities at semi-arid locations in the context of total lead exposure

Lead from historical mining and mineral processing activities may pose potential human health risks if materials with high concentrations of bioavailable lead minerals are released to the environment. Since the Joint Expert Committee on Food Additives of Food and Agriculture Organization/World Health Organization withdrew the Provisional Tolerable Weekly Intake of lead in 2011, an alternative method was required for lead exposure assessment. This study evaluated the potential lead hazard to young children (0–7 years) from a historical mining location at a semi-arid area using the U.S. EPA Integrated Exposure Uptake Biokinetic (IEUBK) Model, with selected site-specific input data. This study assessed lead exposure via the inhalation pathway for children living in a location affected by lead mining activities and with specific reference to semi-arid conditions and made comparison with the ingestion pathway by using the physiologically based extraction test for gastro-intestinal simulation. Sensitivity analysis for major IEUBK input parameters was conducted. Three groups of input parameters were classified according to the results of predicted blood concentrations. The modelled lead absorption attributed to the inhalation route was lower than 2 % (mean?±?SE, 0.9 %?±?0.1 %) of all lead intake routes and was demonstrated as a less significant exposure pathway to children’s blood, compared with ingestion. Whilst dermal exposure was negligible, diet and ingestion of soil and dust were the dominant parameters in terms of children’s blood lead prediction. The exposure assessment identified the changing role of dietary intake when house lead loadings varied. Recommendations were also made to conduct comprehensive site-specific human health risk assessment in future studies of lead exposure under a semi-arid climate.     

Human health risk assessment of lead,manganese and copper from scrapped car paint dust from automobile workshops in Nigeria

The economic downturn in Nigeria and Structural Adjustment Programme led to the flooding of Nigerian market with imported used automobiles. Most of these vehicles needed refurbishing and reworking. The present study is a human health risk assessment of metal exposure resulting from reworking of imported used vehicles in Nigeria. Scrap paint dusts from 56 Japanese made cars were collected from 8 different mechanic villages (workshops A–H] in Southeastern Nigeria. Scrap paints were homogenized, mixed, divided into fine particles and digested by standard method. The filtrates were assayed of lead, manganese and copper with atomic absorption spectrophotometry (AAS). Workshop B has the highest concentration of Pb (4.26 ± 0.93). Manganese in workshops A and F were (3.31 ± 0.85) and (3.04 ± 0.47) respectively and were higher than the levels from workshops C, B, D, G and H. Copper in workshop D (7.11 ± 0.21) was significantly greater than the other workshops. The highest hazard quotient (HQ) through ingestion, inhalation and dermal exposures in adults were 9.44E−05 (workshop B), 4.20E−01 (workshop B) and 1.08E−05 (workshop D) respectively. The highest values for HQ through ingestion, inhalation and dermal in children were 8.82E−04, 7.61E−01 and 2.86E−05 all in workshop B respectively. For children, the highest carcinogenic risk levels were 7.05E−08, 6.09E−05 and 2.29E−10 for ingestion, inhalation and dermal exposures respectively. In adults, the carcinogenic risk levels were 7.55E−09, 3.39E−05 and 8.67E−10 for ingestion, inhalation and dermal exposures respectively. Chronic exposure to scrap car paint dusts may be of significant public health importance in Nigeria as this may add to the body burden of some heavy metals.

     

Pharmacokinetic model of dioxin and furan levels in adipose tissue from Sawmill work involving chlorophenate fungicides

Sawmill workers in British Columbia (B.C.), Canada, have been exposed to chlorophenate fungicides which are known to be contaminated with polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). Due to concern about the potential of these workers to have significant body burdens of PCDD/Fs, and the absence of measurements in these worker, a single-compartment pharmacokinetic model was developed to estimate the concentration of PCDD/Fs in the fat tissue of the sawmill workers. Data from a large cohort of B.C. sawmill workers and literature-based data on chlorophenate exposures and PCDD/F concentrations in chlorophenates were used in Monte Carlo simulations to predict a PCDD/F body burden distribution. The median concentrations of HxCDF and HpCDF predicted using the model for the B.C. sawmill worker population exceeded the range measured in unexposed populations. PeCDF and OCDF concentrations exceeded the range measured in unexposed populations at the 70th percentile of the model-predicted distribution, and PeCDD at the 90th percentile. The primary limitation of the model was the scarcity of input data about actual dermal and inhalation exposures to chlorophenates.     

Spray irrigation of landfill leachate: estimating potential exposures to workers and bystanders using a modified air box model and generalised source term

Generalised source term data from UK leachates and a probabilistic exposure model (BPRISC(4)) were used to evaluate key routes of exposure from chemicals of concern during the spraying irrigation of landfill leachate. Risk estimates secured using a modified air box model are reported for a hypothetical worker exposed to selected chemicals within a generalised conceptual exposure model of spray irrigation. Consistent with pesticide spray exposure studies, the key risk driver is dermal exposure to the more toxic components of leachate. Changes in spray droplet diameter (0.02-0.2 cm) and in spray flow rate (50-1000 l/min) have little influence on dermal exposure, although the lesser routes of aerosol ingestion and inhalation are markedly affected. The risk estimates modelled using this conservative worst case exposure scenario are not of sufficient magnitude to warrant major concerns about chemical risks to workers or bystanders from this practice in the general sense. However, the modelling made use of generic concentration data for only a limited number of potential landfill leachate contaminants, such that individual practices may require assessment on the basis of their own merits.     

Human health risks of petroleum-contaminated groundwater

BACKGROUND, AIM AND SCOPE: The volatile organic compounds Benzene, Toluene, Ethylbenzene and Xylene (BTEX) are commonly found in petroleum derivatives and, at relatively high levels, can be associated with human health risks. Due to industrial activities, accidental petroleum spills are the main route of soil and groundwater contamination. The aim of the present study was to evaluate the indoor health risks due to tap water consumption contaminated by BTEX. MATERIALS AND METHODS: BTEX indoor exposure can occur through three principal pathways: inhalation, ingestion and dermal absorption. A multiphase and multicomponent model was used to simulate BTEX transport in groundwater. For evaluation of human risks due to the use of contaminated tap water, a mathematical model was elaborated. RESULTS: BTEX concentrations in a drinking well were obtained as a function over time. These concentrations were used to obtain the exposure due to the use of water from the contaminated drinking well. In addition to showing the highest concentration in water, benzene was the compound that remained for a longer period before being completely degraded. For all the evaluated BTEX, oral ingestion was also the main pathway of exposure for adults, whereas the contribution of inhalation and oral exposition in children were seen to be of the same magnitude. The sensitivity analysis of BTEX total dose for adults showed that direct ingestion was the most significant factor, followed by shower time, volume of the shower room, inhalation rate, and shower flow rate. For children, the most significant variable was also direct ingestion, followed by shower time, volume of the shower room, and body weight. DISCUSSION: In the current design situation, there would not be any health risks by the use of BTEX-contaminated water to the general population living in the neighborhood of the petroleum spill. Therefore, no remediation measures in the area of the spill would be necessary. CONCLUSIONS: The present results indicate that the design of a good scenario can perform an accuracy risk assessment. This model can serve as a useful tool for predicting indoor exposure to substances for which no direct data are available, reducing monitoring efforts and observing how different processes affect outcomes. RECOMMENDATIONS AND PERSPECTIVES: These preliminary data allow the establishment of a basis for further investigations focusing on efficiently recovering petroleum from contaminated sites.     

Nitrogen dioxide induced changes in level of free fatty acids, triglyceride, esterified fatty acid, ganglioside and lipase activity in the guinea pig brain.

The biochemical response to controlled inhalation of nitrogen dioxide (NO2) was studied in 18 male guinea pigs. Animals were exposed to 2.5, 5.0, and 10 ppm NO2 for 2h daily for 35 consecutive days, and the results compared with six control animals exposed to filtered air for 2h daily for same period. Five biochemical parameters, including triglyceride, free fatty acids, esterified fatty acid, ganglioside and lipase activity were measured immediately after the last day of exposure. At 2.5 ppm NO2 inhalation no significant changes occurred in any region of the central nervous system (CNS). While as the dose concentration was increased to 5 and 10 ppm nitrogen dioxide, significant dose-related alteration were observed in the levels of triglyceride, free fatty acid, esterified fatty acid, ganglioside and lipase activity in the different regions of the guinea pig CNS.     

Product Guide/1988

Investigation, mitigation, and clean-up of hazardous materials at Superfund sites normally requires on-site workers to perform hazardous and sometimes potentially dangerous functions. Such functions include site surveys and the reconnaissance for airborne and buried toxic environmental contaminants. Airborne contaminants of concern usually emanate from spilled materials and require monitoring the air at the perimeter and throughout the clean-up site to ascertain the extent of contamination. Buried contaminants of major concern are often the result of leaking underground drums containing toxic wastes and require "reconnaissance excavations" to determine their location. Workers conducting on-site air monitoring risk dermal, ocular and inhalation exposure to hazardous chemicals, while those performing excavations also risk the potential exposure to fire, explosion, and other physical injury. EPA's current efforts to protect its workers and mitigate these risks include the use of robotic devices. Using robots offers the ultimate in personnel protection by removing the worker from the site of potential exposure, especially during site investigations, when there is almost always a certain encounter with unknown chemical wastes having unknown toxicity.

This paper describes the demonstration of a commercially-available robotic plat form modified and equipped for air monitoring and the ongoing research for the development of a ground penetrating radar (GPR) system to detect buried chemical waste drums. These robotic devices can ultimately be routinely deployed in the field for the purpose of conducting inherently safe reconnaissance activities during Superfund / SARA remedial operations.     

Does the Harvard/U.S. Environmental Protection Agency Ambient Particle Concentrator Change the Toxic Potential of Particles?

Abstract

Inhalation exposure to urban air particles is known to increase morbidity in humans and animals. Our group utilizes the Harvard/U.S. Environmental Protection Agency Ambient Particle Concentrator (HAPC) to generate concentrated aerosols of outdoor air particles for experimental exposures. We have reported increased pathologic responses to inhalation of concentrated urban air particles and identified silicon (as silicate) as an element associated with many of these responses. Using silicate-rich Mt. St. Helen’s volcanic ash (MSHA), we exposed three groups of Sprague-Dawley rats by inhalation for 6 hr to filtered air, MSHA, or MSHA passed though the HAPC. Twenty-four hours following exposure, bronchoalveolar lavage was performed to assess total cell count, differential cell count, protein, lactate dehydrogenase, and n-β[notdef]glucosaminidase levels. Peripheral blood was examined for packed cell volume, total protein, total white cells, and differential cell count. Morphologic studies localized particles in the lung and assessed pulmonary vasculature. No significant differences were observed among any of the groups in any parameter measured including morpho-metric analysis of pulmonary vasoconstriction. Scanning electron microscopy and X-ray analysis identified particles as silicates typical of MSHA throughout the lung. These findings suggest that particles passing through the HAPC have no change in their toxic potential in an exposure setting where particle deposition in the lung has occurred.     

Multi-route human health risk assessment from trihalomethanes in drinking and non-drinking water in Abadan,Iran

Natural organic matter reacted with chlorine used for disinfection, and finally, trihalomethanes (THMs) are formatted. The main purpose of this study was to determine four THM concentrations and human health cancer risk and non-cancer risk assessment from exposure through oral ingestion, dermal contact, and inhalation for males and females in Abadan. Two sampling sites were selected, and five samples before and after treatment by two different water treatment systems (RO and ion exchange) were collected every week. Results showed that total THM concentrations before and after treatment by RO were 98.1 and 8.88 μg/L, and ion exchange ranged between 101.9 and 14.96 μg/L, respectively, that before treatment was upper than the maximum of 80 mg/L recommended by USEPA. Inhalation was the primary route of exposure by around 80–90% of cancer risk. Total cancer risk was higher than the USEPA acceptable limit of 10^?6 via three exposure routes. Oral route has the higher hazard index values than dermal ways.

     

Inhalation toxicity studies of thimet (phorate) in male Swiss albino mouse, Mus musculus: I. Hepatotoxicity

Biochemical and histopathological changes in serum and liver of the male Swiss Albino mouse, Mus musculus, exposed subchronically to the recommended field dose of Thimet (6728.5 mg m(-3)) in a whole body inhalation chamber were studied in the second, fourth, sixth, eighth, tenth and twelfth week of exposure. A significant rise in Aspartate aminotransferase (AST) and Alanine aminotransferase (ALT) activities were observed throughout the experiment. Alkaline phosphatase (ALP) activity showed a significant rise from the fourth week of exposure until the end of the experiment. The rise in the activities of these enzymes suggested hepatocellular necroinflammatory disease. Total bilirubin level was increased significantly throughout the experiment (indicative of jaundice); however the direct bilirubin level was significantly high in the tenth and twelfth week of exposure and indirect bilirubin showed a significant rise from the fourth week of exposure until the end of the experiment. Changes in bilirubin levels (direct and indirect) suggested both prehepatic and hepatocellular hyperbilirubinaemia. The biochemical changes observed and fatty change in the liver were confirmed by histopathological studies. Liver lesions were present throughout the experimental period. These consisted of mild to severe multifocal cloudy, hydropic and fatty degenerations, with necrosis. After a 30-day recovery period most of the histopathological and biochemical changes except the AST level were almost back to normal. These results suggest the inhalation of Thimet (Phorate) at the recommended field dose could affect the liver of Mus musculus.     

An automated overlying water-renewal system for sediment toxicity studies

An automated water-renewal toxicity test system is described for exposing benthic invertebrates to whole sediments. The system will intermittently deliver laboratory or on-site water for overlying water replacement in sediment exposures. A range of cycle rates can be used to produce different volume additions of overlying water per day to exposure chambers. The system can be used with six different treatments and eight replicates per treatment producing 48 exposure chambers. Three formulated sediments with variable organic carbon (1.5%, 7.5%) and sand (14%, 63%) content were prepared to test the system exposing amphipods, Hyalella azteca and midges, Chironomus tentans in 10 day whole sediment tests. Intermittent water flow was used with a 90 min cycle time to create two volume additions of laboratory water per 24 h in exposure chambers (180 ml sediment, 320 ml water). Overlying water quality conditions, and survival and growth of both species were consistent and within acceptable limits for the testing requirements of the U.S. EPA guidelines for sediments with freshwater invertebrates.