Melting and incineration plants of municipal waste. Chemical and biochemical diagnosis of thermal processing samples (emission,residues)

Control of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) in emissions and thermal residues from incinerators has been a cause of public concern for more than one decade. Recently, several studies showed that other persistent organic pollutants (POPs) such as coplanar polychlorinated biphenyls (co-PCBs) also have dioxin-like activity and are released from incinerators. Therefore, the present study was aimed at making a risk assessment about dioxin-like activity in extracts of thermal waste residues (e.g. combustion gas; fly ash, slag) from incineration and melting processes in Germany and Japan. For this purpose, polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs), coplanar polychlorinated biphenyls (co-PCBs), polychlorinated naphthalenes (PCNs) and polyaromatic hydrocarbons (PAHs) were analyzed by chemical analysis. Additionally, 2, 3, 7, 8-TCDD equivalents (EROD-TEQs) were determined by in vitro Micro-EROD bioassay using rat H4IIE hepatoma cells. EROD-TEQs could be correlated to I-TEQ values (from PCDD/Fs/co-PCBs) analyzed by chemical analysis resulting in a maximal sixfold higher estimate. Our study indicates minor influences of co-PCBs, PAHs and PCNs to the sum of dioxin-like toxicity in the extracts of thermal waste residues as determined here. Furthermore, we showed that the levels of dioxins and co-PCBs contained in slag from melting processes and bottom ashes from incineration processes were lower by 1-2 orders of magnitude than that in fly ash.     

Definition and GIS-based characterization of an integral risk index applied to a chemical/petrochemical area

A risk map of the chemical/petrochemical industrial area of Tarragona (Catalonia, Spain) was designed following a two-stage procedure. The first step was the creation of a ranking system (Hazard Index) for a number of different inorganic and organic pollutants: heavy metals, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polychlorinated aromatic hydrocarbons (PAHs) by applying self-organizing maps (SOM) to persistence, bioaccumulation and toxicity properties of the chemicals. PCBs seemed to be the most hazardous compounds, while the light PAHs showed the minimum values. Subsequently, an Integral Risk Index was developed taking into account the Hazard Index and the concentrations of all pollutants in soil samples collected in the assessed area of Tarragona. Finally, a risk map was elaborated by representing the spatial distribution of the Integral Risk Index with a geographic information system (GIS). The results of the present study seem to indicate that the development of an integral risk map might be useful to help in making-decision processes concerning environmental pollutants.     

PCBs,PCNs, PCDD/Fs,PAHs and Cl-PAHs in air and water particulate samples--patterns and variations

Methodology for the determination of biologically active polychlorinated biphenyls (PCBs), non-ortho PCBs, polychlorinated naphthalenes (PCNs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polycyclic aromatic hydrocarbons (PAHs) was used to investigate concentrations and patterns of certain chlorinated PAH (Cl-PAH) in source related samples using synthetic reference mixtures. Thus, in addition to the above mentioned compounds, mono-heptachlorosubstituted fluorenes, phenanthrenes/anthracenes and pyrenes/fluoranthenes (Cl-PAHs) were measured in vapour and particulate air samples from urban road tunnels, samples of settling particulate matter (SPM), and in bottom sediment samples from two point source locations (pulp and paper, and Mg-plant/Fe-Mn-smelter/chlor-alkali) and in the Baltic Sea. Concentrations in air samples followed: PAHs>PCBs>PCNs>non-ortho PCBs or Cl-PAHs>PCDD/Fs. SPM samples collected at increasing distance to the urban area of Stockholm showed: PAHs>PCBs>PCNs>PCDD/Fs>non-ortho PCBs or Cl-PAHs. For all compound groups there was a tenfold (Cl-PAHs fivefold) concentration decrease in SPM samples from highest levels in the urban water area to lowest levels at a distance of 26 km from city centre. PCB profiles of SPM showed similarities with combined profiles of Aroclor 1242 and 1254. PCN profiles of SPM showed similarities with combined profiles of Halowax 1099 and 1014. A correlation with concentration of all tested Cl-PAH and their corresponding parent PAH was found only for Cl-fluorene.     

Polychlorinated dibenzo-p-dioxins, dibenzofurans, biphenyls, naphthalenes and polybrominated diphenyl ethers in the edible fish caught from the Baltic Sea and lakes in Finland

A total of 156 fish composite samples were collected from five areas of the Baltic Sea and from three lakes and analysed for polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polybrominated diphenyl ethers (PBDEs). The European Union's maximum permissible level for PCDD/Fs, 4 pg WHO-TEQ/g fresh weight (fw), was exceeded in salmon, river lamprey and Baltic herring. In other species from the Baltic Sea, the 90th percentile was 3.42 pg WHO(PCDD/F)-TEQ/g fw. In the lake fish, the concentrations of PCDD/Fs, PCBs and PCNs were only 29-46% of those in the same species caught from the Baltic Sea, whereas the concentrations of PBDEs in the lake fish were as high as in the Baltic Sea fish. Dioxin-like PCBs contributed to the total dioxin-like toxicity of PCBs and PCDD/Fs by 49+/-12% in all the analysed samples.     

Environmental monitoring of PCDD/Fs and metals in the vicinity of a cement plant after using sewage sludge as a secondary fuel

In 2005, the partial substitution (20%) of fossil fuel by sewage sludge was tested in a Spanish cement plant. In order to establish the environmental impact for the surroundings, in 2006, the levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and heavy metals (As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sn, Tl, V, and Zn) were monitored in soil and vegetation samples collected near the cement plant. The temporal trends in the pollutant levels were studied by comparing the concentrations with those obtained in a previous survey (2003) in the same sampling sites. Very slight changes of the PCDD/F concentrations in both monitors were registered in the period 2003–2006 (0.17–0.15 and 0.94–1.10 ng I-TEQ kg⁻¹ dw in herbage and soil, respectively). In turn, there was a notable heterogeneity in the evolution of metal levels, which varied according to each particular element. Anyhow, the current levels of organic and inorganic pollutants are in the low part of the range in comparison with other zones impacted by cement plants, as well as industrial and urban areas worldwide. The human health risks derived from the exposure to PCDD/Fs and metals were also assessed. Although the cancer risks due to PCDD/Fs slightly increased, a reduction of the total carcinogenic risks, including metals, was noted. In conclusion, there were not observed impact changes for the environmental and the local population as a consequence of using sewage sludge as secondary fuel.     

Estimation and characterization of unintentionally produced persistent organic pollutant emission from converter steelmaking processes

Unintentionally produced persistent organic pollutants (UP-POPs) including polychlorinated dibenzo-p-dioxins, and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were characterized and quantified in stack gas and fly ash from the second ventilation systems in five typical converters in five different steelmaking plants. The 2378-substituted PCDD/Fs (2378-PCDD/Fs) and dioxin-like PCB (dl-PCBs) toxic equivalents (TEQs) were 1.84–10.3 pg WHO-TEQ Nm^?3 in the stack gas and 5.59–87.6 pg WHO-TEQ g^?1 in the fly ash, and the PCN TEQs were 0.06–0.56 pg TEQ Nm^?3 in the stack gas and 0.03–0.08 pg TEQ g^?1 in the fly ash. The concentrations of UP-POPs in the present study were generally lower than those in other metallurgical processes, such as electric arc furnaces, iron ore sintering, and secondary metallurgical processes. Adding scrap metal might increase UP-POP emissions, indicating that raw material composition was a key influence on emissions. HxCDF, HpCDF, OCDF, HpCDD, and OCDD were the dominant PCDD/Fs in the stack gas and fly ash. TeCB and PeCB were dominant in the stack gas, but HxCB provided more to the total PCB concentrations in the fly ash. The lower chlorinated PCNs were dominant in all of the samples. The 2378-PCDD/F, dl-PCB, and PCN emission factors in stack gases from the steelmaking converter processes (per ton of steel produced) were 1.88–2.89, 0.14–0.76_, and 229–759 μg t^?1, respectively.     

Levels of metals, PCBs, PCNs and PAHs in soils of a highly industrialized chemical/petrochemical area: temporal trend

In 2005, the concentrations of various metals and organic pollutants were analyzed in soils collected in different areas of Tarragona (Catalonia, Spain), where an important chemical/petrochemical complex is located. The levels of seven elements (As, Cd, Cr, Hg, Mn, Pb and V), as well as those of polychlorinated biphenyls (PCBs), polychlorinated naphthalenes (PCNs) and polycyclic aromatic hydrocarbons (PAHs) were determined in soils, and compared with those obtained in a background study carried out in 2002. Only Cd and Pb showed significant higher concentrations in the petrochemical zone, while no significant differences were found for the remaining elements. In turn, vanadium was the only element showing a significant increase in the concentration between 2002 and 2005. With regard to the organic pollutants, no significant differences were found according to the area of sampling. However, an increase in naphthalene levels was observed during the period 2002-2005 in soils of the chemical and petrochemical areas. According to the present results, it is suggested that the levels of vanadium must be periodically monitored to assure that the important industrialization of Tarragona does not mean health risks for the population living near the complex.     

Air concentrations of PCDD/Fs, PCBs and PCNs using active and passive air samplers

The concentrations of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polychlorinated naphthalenes (PCNs) were determined in air samples collected at four sampling sites located in two zones of Barcelona (Spain): near a municipal solid waste incinerator (MSWI) and a combined cycle power plant (3 sites), and at a background/control site. Samples were collected using high-volume active samplers. Moreover, 4 PUF passive samplers were deployed at the same sampling points during three months. For PCDD/Fs, total WHO-TEQ values were 27.3 and 10.9 fg WHO-TEQm(-3) at the urban/industrial and the background sites, respectively. The sum of 7 PCB congeners and the Sigma PCN levels were also higher at the industrial site than at the background site. In order to compare active and passive sampling, the accumulated amounts of PCDD/Fs, PCBs and PCNs in the four passive air samplers, as well as the total toxic equivalents in each sampling site were also determined. To assess the use of PUF passive samplers as a complementary tool for PCDD/F, PCB and PCN monitoring, sampling rates were calculated in accordance with the theory of passive air samplers. PUF disks allowed establishing differences among zones for the POP levels, showing that they can be a suitable method to determine POP concentrations in air in areas with various potential emission sources. Although both particle and gas phase were sorbed by the PUFs, data of gas phase congeners are more reproducible.     

Atmospheric deposition of PCDD/Fs near an old municipal solid waste incinerator: levels in soil and vegetation

The levels of polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) were determined in soil and vegetation samples taken from 24 sites in the vicinity of an old municipal solid waste incinerator (San Adrià del Besòs, Barcelona, Spain). Duplicate samples were collected within a radius of 3 km from the stack. PCDD/F concentrations in soils ranged from 1.22 to 34.28 ng I-TEQ/kg (d.m.) with median and mean values of 9.06 and 12.24 ng I-TEQ/kg, respectively. In turn, the levels of PCDD/Fs in vegetation samples ranged from 0.33 to 1.98 ng I-TEQ/kg (d.m.), with median and mean values of 0.58 and 0.70 ng I-TEQ/kg, respectively. Although the present PCDD/F concentrations in soil samples were higher than those recently found in soils taken near other incinerators from Catalonia, they are of the same order of magnitude than the levels of these pollutants found in incinerators from other countries. By contrast, the concentrations of PCDD/Fs in herbage samples were comparable to those found in recent surveys carried out in Catalonia.     

Estimation and characterization of PCDD/Fs, dl-PCBs, PCNs, HxCBz and PeCBz emissions from magnesium metallurgy facilities in China

Magnesium production is considered to be one potential source of unintentional persistent organic pollutants (unintentional POPs). However, studies on the emissions of unintentional POPs from magnesium metallurgy are still lacking. Emissions of unintentional POPs, such as polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), polychlorinated naphthalenes (PCNs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz) are covered under the Stockholm Convention. In this study, these emissions were investigated through a magnesium smelting process. Stack gas and fly ash samples from a typical magnesium plant in China were collected and analyzed to estimate the emissions of unintentional POPs from magnesium metallurgy. Emissions factors of 412 ng TEQ t⁻¹ for PCDD/Fs, 18.6 ng TEQ t⁻¹ for dl-PCBs, 3329 μg t⁻¹ for PCNs, 820 μg t⁻¹ for HxCBz, and 1326 μg t⁻¹ for PeCBz were obtained in 2009. Annual emissions from magnesium metallurgy in China were estimated to be 0.46 g WHO-TEQ for PCDD/Fs and dl-PCBs, 1651 g for PCNs, 403 g for HxCBz and 653 g for PeCBz, respectively.     

PCDD/Fs and dioxin-like PCBs in sediment and biota from the Mondego estuary (Portugal)

The concentrations of 17 polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs), and 12 dioxin-like polychlorinated biphenyls (dl-PCBs) were measured in sediment and key species as an initial investigation on PCDD/Fs and dl-PCBs contamination in the Mondego estuary (Portugal). The results demonstrated that the values of the total PCDD/Fs (∑PCDD/Fs) concentrations were considerably lower than those of the sum of dl-PCBs (∑dl-PCBs) in all the studied samples. Regarding the contribution of individual congeners, OCDD was the predominant PCDD/F and the mono-ortho PCB 118 and PCB 105 were the dominant PCBs in the majority of the samples. Our results suggest that PCDD/Fs and PCBs behave quite differently along the aquatic food web: ∑PCDD/Fs concentrations were lower in higher trophic-level organisms with fish presenting a distinct PCDD/Fs congeners profile; on the contrary, the higher ∑dl-PCBs values were found in upper-level biota, although not exclusively, and quite similar dl-PCBs congener profiles were observed in nearly all the studied species.     

Characteristics of PAHs, PCDD/Fs and PCBs in sediment following forest fires in northern Alberta

Extensive forest fires occurred in northern Alberta, Canada, in 1998. Polynuclear aromatic hydrocarbons (PAHs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polychlorinated biphenyls (PCBs) were studied following these forest fires in order to explore natural and anthropogenic influences on the affected forest fire area. Specifically, concentrations and profiles of these compounds were determined in sediment samples. A predominance of alkylated PAH derivatives over parent PAHs were observed at the burned and reference sites. Naturally dervied PAHs were abundant at all sites. A high proportion and concentration of retene was observed at the totally burned site and indicates some inputs from forest fires. Very low concentrations of PCDD/Fs and PCBs were observed at all sites, and the profiles were very similar. This likely reflects common atmospheric contributing sources to the study area.     

Atmospheric pollution by PAHs, PCDD/Fs and PCBs simultaneously collected at a regional background site in central Italy and at an urban site in Rome

Concentrations of PAHs and PCDD/Fs were measured throughout one year, and PCBs during the second semester, at a rural site in a natural park representative of background pollution in central Italy; results were compared with simultaneous measurements performed at an urban site in Rome 60km away. Twenty-four daily samples were collected at each site by a high-volume PM(10) sampler from February 2000 to January 2001. After ultrasonic extraction and clean-up by TLC, samples were analysed by GC-MS. Mean concentrations of benzo[a]pyrene (BaP, as a marker of carcinogenic PAHs), summation operatorPCDD/Fs and summation operator64 PCBs in Rome were, respectively: 1.1ngm(-3), 65fgWHO-TEQm(-3), 553pgm(-3). The background concentrations were, respectively: 0.016ngm(-3), 3fgWHO-TEQm(-3), and 94pgm(-3). Hence, BaP, and the other PAHs, showed the highest urban-background gradient (two orders of magnitude) and PCBs the lowest. The background pollution levels of BaP and PCDD/Fs were in agreement with the few available background/remote measurements in Europe. In Rome PAHs and PCBs, but not PCDD/Fs, were clearly seasonal; the PCDD/F TEQ was moderately correlated with BaP (P<0.001). At the background site, the seasonality of PAHs was less marked, while it could not be assessed for PCDD/Fs and PCBs. The PCB TEQ accounted for 4% and 15% of total (PCDD/Fs+PCBs) TEQ at the urban and background site, respectively. Mean PM(10) concentration was 54microgm(-3) in Rome and 15microgm(-3) at the background site.     

Atmospheric particle size distributions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polycyclic aromatic hydrocarbons (PAHs) and their implications for wet and dry deposition

Concurrent measurements of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polycyclic aromatic hydrocarbons (PAHs) in different size fractions of atmospheric particulate matter are presented for a winter and a summer sampling period. The PCDD/Fs and PAHs were primarily associated with particles of <1.35 μm aerodynamic diameter. The particle size distributions were similar for the compounds within each substance group and, surprisingly, also between the PCDD/Fs and PAHs. Changes in the particle size distribution of particle mass were reflected in the particle size distributions of the PCDD/Fs and PAHs.The data were employed to identify those particle size fractions dominating the wet and dry particle bound deposition of PCDD/Fs and PAHs and, furthermore, to assess the relative contributions of wet and dry deposition to the total particle bound deposition fluxes. The calculations indicate that coarse particles contribute most to the dry deposition while, in contrast, the wet deposition of the PCDD/Fs and PAHs is dominated by fine particles. Furthermore, it is estimated that in Bayreuth wet deposition dominates the total particle bound deposition of PCDD/Fs and PAHs.     

Assessment of the emission of PCDD/Fs and dioxin-like PCBs from an industrial area over a nearby town using a selective wind direction sampling device

The development of new sampling devices or strategies to assess the concentration of persistent organic pollutants (POPs) in the environment has increased in the last two decades. In this study, a selective sampling device was used to evaluate the impact of potential local sources of polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/Fs) and dioxin-like polychlorinated biphenyl (dl-PCBs) emissions on the ambient air levels of such compounds in a town near an important industrial estate. Average concentrations of target compounds of up to 2.5 times for PCDD/Fs and 2 times for dl-PCBs were found to come from the industrial state confirming this area as the main responsible for the majority of such compounds reaching the town.This finding was supported by a PCDD/F and dl-PCB sample profile analysis and a principal component analysis (PCA), which established a direct link between the dioxin-like compounds found in the samples collected in the town and their source.     

Prediction of octanol--air partition coefficients of semivolatile organic compounds based on molecular connectivity index

A new method has been developed to describe the quantitative relationship between the octanol-air partition coefficients and molecular connectivity indexes of semivolatile organic compounds such as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated naphthalenes (PCNs), polycyclic aromatic hydrocarbons (PAHs), chlorobenzenes (CBs), polybrominated diphenyl ethers (PBDEs). The stepwise multiple linear regression was used to derive six equations with correlation coefficients greater than 0.99 except for PBDEs' (0.96). The largest relative error is 4.6%, and the standard deviation is less than 1.83 log units. Compared with the data obtained from the relevant experiments, the results of prediction are very accurate.     

Monitoring PCDD/Fs, PCBs and metals in the ambient air of an industrial area of Catalonia, Spain

In 2005 and 2006, the levels of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and metals (As, Be, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sn, Tl and V) were measured in air samples collected in an industrial area of Sant Adrià del Besòs (Barcelona, Catalonia, Spain) where a municipal solid waste incinerator (MSWI) is placed, and in a background/control area. In general terms, concentrations of all environmental pollutants were higher at the industrial site. No significant seasonal/temporal variations were observed in any of the areas. No Pearson correlation was found between the PCDD/F concentrations and the environmental conditions of the two sampling periods considered. Principal component analyses (PCA) were performed to get information on the relationship among samples, pollutants, and emission sources. The results indicate that the MSWI of S. Adrià de Besòs is not a significant emission source of the above compounds for the area under its direct influence. Moreover, a notable difference in the PCDD/F congener profiles was found between ambient air and stack gas emissions, indicating that the current levels of PCDD/Fs are more related to other potential emissions sources rather than to those from the MSWI.     

Temporal trends and sources of PCDD/Fs, pentachlorophenol and chlornitrofen in paddy field soils along the Yoneshiro River basin, Japan

In order to understand the long-term behaviors of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), pentachlorophenol (PCP), and 2,4,6-trichlorophenyl-4′-nitrophenyl ether (chlornitrofen, CNP) in paddy soil, we measured their concentrations in paddy soil samples collected in 1982 and 1984 (1980s) and in 2000 and 2002 (2000s) from the Yoneshiro River basin, Japan. The concentrations of PCP and CNP decreased from the 1980s to the 2000s, whereas the concentrations of PCDD/Fs and their toxic equivalency (WHO2006-TEQ) remained. The major sources of PCDD/Fs in the paddy soil samples were attributed to impurities in PCP and CNP as a result of comparisons of homologue and congener profiles and principal component analysis. Based on the results of comparison of total input and remaining amount, it is estimated that more than 99% of PCP and CNP applied to the paddy fields had disappeared, whereas most of the applied PCDD/Fs and TEQ remained.     

Human exposure to polychlorinated naphthalenes through the consumption of edible marine species

The concentrations of polychlorinated naphthalenes (PCNs) were determined in samples of 14 edible marine species (sardine, tuna, anchovy, mackerel, swordfish, salmon, hake, red mullet, sole, cuttlefish, squid, clam, mussel and shrimp), which are widely consumed by the population of Catalonia, Spain. The daily intake of PCNs associated with this consumption was also determined. A total of 42 composite samples were analyzed by HRGC/HRMS. The highest PCN levels (ng/kg of fresh weight) were found in salmon (227) followed by mackerel (95) and red mullet (68), while the lowest levels of total PCNs corresponded to shrimp (4.9) and cuttlefish (2.7). With the exception of cephalopods and shellfish species, in which tetra-CN was the predominant homologue, penta-CN (60%) was the predominant contributor to total PCNs. For a standard male adult, PCN intake through the consumption of edible marine species was 1.53 ng/day. The highest contributions to this intake (ng/day) corresponded to salmon (0.41), sole (0.28) and tuna (0.24). Concerning health risks, species-specific TEFs such as those reported by WHO and NATO for PCDD/Fs and dioxin-like PCBs are not currently available for PCN congeners. Although in general terms the results of the present study do not seem to suggest specific risks derived from exposure to PCNs through fish and seafood consumption, to establish the contribution of individual PCN congeners to total TEQ is clearly necessary for the assessment of human health risks.     

Effect of copper chloride on the emissions of PCDD/Fs and PAHs from PVC combustion

The influences of temperature, air flow and the amount of copper chloride upon the types and amount of the toxic emissions such as polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) and polycyclic aromatic hydrocarbons (PAHs) during combustion of polyvinyl chloride (PVC) were investigated. The mechanism concerning the effect of temperature and copper chloride on the PCDD/Fs and PAHs formation was discussed. The results shown that without copper chloride, trace amounts of PCDD/Fs and large amounts of PAHs were found in the emissions from the pure PVC combustion under various combustion conditions. The addition of copper chloride enhanced PCDD/Fs formation, but it seems that the formation of PAHs decreased with increasing amount of copper chloride, and greater total amount of PAHs were produced at the higher temperature under our experimental conditions.