Planning and Conducting Sampling Surveys of Hazardous Wastes at Industrial Facilities

Many organizations and their consultants are involved in sampling programs to characterize waste streams and materials at industrial facilities. Due to financial limitations, calendar deadlines, or other practical restrictions, a short-term, survey-type sampling plan (“sampling survey”) may need to he implemented. Survey results can he used to determine if the wastes are hazardous or if they are being managed in accordance with applicable regulations. This paper brings together practical experience and diverse information to identify the major concerns in conducting sampling surveys and to suggest methods of approaching these concerns. The paper addresses sampling in time and space, “correct” sampling to minimize bias, selecting equipment to minimize contamination, sample handling, and quality assurance/quality control. Even a quick sampling survey can be a high quality effort with a careful approach to the critical issues.     

Applicability of a modified MCE filter method with Button Inhalable Sampler for monitoring personal bioaerosol inhalation exposure

In this study, a “modified” mixed cellulose ester (MCE) filter culturing method (directly placing filter on agar plate for culturing without extraction) was investigated in enumerating airborne culturable bacterial and fungal aerosol concentration and diversity both in different environments. A Button Inhalable Sampler loaded with a MCE filter was operated at a flow rate of 5 L/min to collect indoor and outdoor air samples using different sampling times: 10, 20, and 30 min in three different time periods of the day. As a comparison, a BioStage impactor, regarded as the gold standard, was operated in parallel at a flow rate of 28.3 L/min for all tests. The air samples collected by the Button Inhalable Sampler were directly placed on agar plates for culturing, and those collected by the BioStage impactor were incubated directly at 26 °C. The colony forming units (CFUs) were manually counted and the culturable concentrations were calculated both for bacterial and fungal aerosols. The bacterial CFUs developed were further washed off and subjected to polymerase chain reaction–denaturing gradient gel electrophoresis (DGGE) for diversity analysis. For fungal CFUs, microscopy method was applied to studying the culturable fungal diversity obtained using different methods. Experimental results showed that the performance of two investigated methods varied with sampling environments and microbial types (culturable bacterial and fungal aerosols). For bacterial aerosol sampling, both methods were shown to perform equally well, and in contrast the “modified” MCE filter method was demonstrated to enumerate more culturable fungal aerosols than the BioStage impactor. In general, the microbial species richness (number of gel bands) was observed to increase with increasing collection time. For both methods, the DGGE gel patterns were observed to vary with sampling time and environment despite of similar number of gel bands. In addition, an increase in sampling time from 20 to 30 min was found not to substantially alter the species richness. Regardless of the sampling methods, more species richness was observed in the outdoor environment than the indoor environment. This study described a new personal bioaerosol exposure assessment protocol, and it was demonstrated applicable in monitoring the personal bioaerosol exposure in replace of an Andersen-type impactor.     

Systematic screening of common wastewater-marking pharmaceuticals in urban aquatic environments: implications for environmental risk control

In this report, we refer to pharmaceuticals that are widespread in the urban aquatic environment and that mainly originate from wastewater treatment plants or non-point source sewage as “wastewater-marking pharmaceuticals” (WWMPs). To some extent, they reflect the condition or trend of water contamination and also contribute to aquatic environmental risk assessment. The method reported here for screening typical WWMPs was proposed based on academic concerns about them and their concentrations present in the urban aquatic environment, as well as their properties of accumulation, persistence, eco-toxicity and related environmental risks caused by them. The screening system consisted of an initial screening system and a further screening system. In the former, pharmaceuticals were categorised into different evaluation levels, and in the latter, each pharmaceutical was given a normalised final evaluation score, which was the sum of every score for its properties of accumulation, persistence, eco-toxicity and environmental risk in the aquatic environment. The system was applied to 126 pharmaceuticals frequently detected in the aquatic environment. In the initial screening procedure, five pharmaceuticals were classified into the “high” category, 16 pharmaceuticals into the “medium” category, 15 pharmaceuticals into the “low” category and 90 pharmaceuticals into the “very low” category. Subsequently, further screening were conducted on 36 pharmaceuticals considered as being of “high”, “medium” and “low” categories in the former system. We identified 7 pharmaceuticals with final evaluation scores of 1–10, 10 pharmaceuticals with scores of 11–15, 15 pharmaceuticals with scores from 16 to 20 and 4 pharmaceuticals with scores above 21. The results showed that this screening system could contribute to the effective selection of target WWMPs, which would be important for spatial-temporal dynamics, transference and pollution control of pharmaceuticals in the urban aquatic environment. However, there remains a number of pharmaceutical parameters with measured data gaps, such as organic carbon adsorption coefficients and bioconcentration factors, which, if filled, would improve the accuracy of the screening system.     

The Inadequacy of PSD Increments to Protect Visibility in Class I Areas

This study includes an application of the first two phases of a new three-phased decision-making structure that was developed to overcome the problems related to ecological safety and social justice in site selection applications. It was conducted on a current site selection problem related to the municipal solid waste disposal facilities in Kocaeli, the most industrialized region of Turkey. In order to assess the deficiencies of the legal site selection procedures related to ecological safety, two different decision tree modes were applied separately. The first mode (“Legislation”) concerns the current buffer zone applications given in the regulations, while the second one (“Proposed”) includes the applications of the new decision-making structure proposed in this study. Since it was assumed that the subjective tendencies of the decision makers on the weightings would have a significant effect on the final decision, these two modes were assessed by employing two different weighting models. The results were obtained from all of the scenarios related to selection of suitable sites with three different area requirements (15, 250, and 500 acres) for the solid wastes generated in the Kocaeli region. The results showed that the possible changes in the decision structure could cause significant differences in the final decision related to selection of the most suitable sites. The most highest and lowest differences were at the “Legislation” mode for 15 acres and 500 acres, respectively. Furthermore, the results obtained in the study showed that the possible differentiations in the criteria weightings could also cause significant differences in the suitability ranking. Therefore, to get a reliable final decision, a statistical assessment of these differentiations should be made.

Implications: The results showed that the possible changes in the decision structure could cause significant differences in the final decision related to selection of the most suitable sites. Furthermore, the results obtained in the study showed that the possible differentiations in the criteria weightings could also cause significant differences in the suitability ranking. Therefore, to get a reliable final decision, a statistical assessment of these differentiations should be made.     

Measurements of atmospheric mercury species during an international study of mercury depletion events at Ny-Ålesund,Svalbard, spring 2003. How reproducible are our present methods?

Six groups participated in an international study of springtime atmospheric mercury depletion events (AMDEs) at Ny-Ålesund in the Norwegian Arctic during April and May 2003 with the aim to compare analytical methods for measurements of atmospheric mercury species and study the physical and chemical processes leading to AMDEs. Five groups participated in the method comparison that was conducted at three different locations within Ny-Ålesund. Various automated and manual instrumentation were used to sample, measure and compare gaseous elemental mercury (GEM), reactive gaseous mercury (RGM) and mercury associated with particles (Hg-P). The concentration of GEM was reproducible during background conditions. For the first time using ambient air, the statistics associated with round robin test procedures were applied. This was found to be an appropriate tool to investigate the reproducibility of GEM measurements in ambient air. The precision for each group measuring GEM concentrations was found to be consistently good (within 5%). Five AMDEs were recorded during the study. Using four different methods, including single and replicate samples, all groups recorded higher values of RGM and Hg-P during AMDEs. The results show that measuring comparable atmospheric mercury species at both the same and different locations (within the Ny-Ålesund area) is difficult. Not only do site location and site characteristics create challenges when trying to intercompare results but there are difficulties, as well, in obtaining comparable results with similar sampling and analysis methods. Nevertheless, with our current procedures for atmospheric mercury identification we can differentiate with certainty between “high” and “low” concentration values of RGM and Hg-P.     

Results of the “carbon conference” international aerosol carbon round robin test stage I

An international round robin test on the analysis of carbonaceous aerosols on quartz fiber filters sampled at an urban site was organized by the Vienna University of Technology. Seventeen laboratories participated using nine different thermal and optical methods. For the analysis of total carbon (TC), a good agreement of the values obtained by all laboratories was found (7 and 9% r.s.d.) with only two outliers in the complete data set. In contrast the results of the determination of elemental carbon (EC) in two not pre-extracted samples were highly variable ranging over more than one order of magnitude and the relative standard deviations (r.s.d.) of the means were 36.6 and 45.5%. The laboratories that obtained similar results by using methods which reduce the charring artifact were put together to a new data set in order to approach a “real EC” value. The new data set consisting of the results of 10 laboratories using seven different methods showed 16 and 24% lower averages and r.s.d. of 14 and 24% for the two not pre-extracted samples. Taking the current filters as “equivalents” for urban aerosol samples we conclude that the following methods can be used for the analysis of EC in carbonaceous aerosols: thermal methods with an optical feature to correct for charring during pyrolysis, two-step thermal procedures reducing charring during pyrolysis, the VDI 2465/1 method (removal of OC by solvent extraction and thermodesorption in nitrogen) and the VDI 2465/2 method (combustion of OC and EC at different temperatures) with an additional pre-extraction with a dimethyl formamide (DMF)/toluene mixture. Only thermal methods without any correction for charring during pyrolysis and the VDI 2465/2 method were outside the range of twice the standard deviation of the new data set. For a filter sample pre-extracted with the DMF/toluene mixture the average and r.s.d. from all laboratories (20.7 μgC; 24.4% r.s.d.) was very similar as for the laboratory set reduced to 10 laboratories (20.6 μgC; 19% r.s.d.). Thus DMF pre-extraction appears to improve the performance of the thermal methods without charring during pyrolysis control, e.g. the VDI 2465/2 methods.     

Errors in Measurement and Counting of Particles Using Light Scattering

More efficient air sampling programs can be designed, and clearer interpretations of their data made, if important theoretical aspects are clearly understood. The choice of a sampling time is an important decision affecting the results. Empirical and theoretical calculations show that the averaging effect of sampling time attenuates responses to short period fluctuations in pollutant concentrations. Data for sulfur dioxide concentrations in six cities are examined.

The body acts as a sampling mechanism also, and concentrations inside the body fluctuate less than those outside. These damping processes are quantitatively described. A significant biological parameter is the product of the biological half-life of a pollutant and the fraction of entrance to total resistance for its passage through the body. When sampling time is four times this parameter, attenuation of significant fluctuations is about the same in both samples and the body; when it is twice the parameter, the “sampling window” transmits all significant fluctuations better than the “biological window.” Shorter sampling periods appear to give unnecessary fine detail for biological application according to this theoretical model.     

Assessing spatial variation and overall density of aerially broadcast toxic bait during a rat eradication on Palmyra Atoll

Baits containing brodifacoum rodenticide were aerially applied to eradicate invasive black rats from Palmyra Atoll, an important biodiversity center. Bait application must be sufficient to be effective, while minimizing environmental hazards by not exceeding designated label rates, prompting our bait density assessments for two aerial drops. With few physical or human resources on this remote, uninhabited atoll, assessments were particularly challenging, requiring observations within 30 min of aerial application to avoid bait loss to rats, crabs, or elements. We estimated bait density using quadrat sampling within 13 terrestrial sampling areas. We also sampled 10 tidal flat areas to assess inadvertent bait scatter into marine aquatic environments. Of particular value for challenging sampling circumstances, our quadrats had to be lightweight and durable, which we addressed by using widely available PVC hoops (“Hula Hoops”), the size of which was ideal for sampling purposes. At 77.5 and 78.7 kg/ha, overall bait densities were very near to the target densities of 80 and 75 kg/ha, respectively. However, considerable variability in bait densities existed among sampled areas, 8.6–178.2 and 31.4–129.5 kg/ha for the respective drops, respectively. Environmental, human, and equipment factors likely accounted for this variability. Tidal flat sampling revealed variable bait scatter into aquatic environments, from 0–46.3 kg/ha across the two drops. No differences were found in average bait densities among 1-, 4-, and 7-m distances from high tide lines. Our methods might broadly assist bait density (and other) surveys under challenging circumstances.     

Health risk assessment of an abandoned herbicide factory site for transportation use in Dalian,China

An abandoned herbicide factory site was used as an example of how planning should be considered for development of the site for transportation use in Dalian, China. Exposure pathways and parameters for three types of transportation use (land for a traffic hub, land for an urban road, and land for a subway) were developed. Twenty-five sampling sites were selected and 38 soil samples were collected in March 2015. Hexachlorobenzene and benzo(a)pyrene which were extracted by Soxhlet extraction and detected by gas chromatography mass spectrometry were the most significant pollutants detected. The maximum concentration of the two pollutants in the surface layer (0–0.5 m) were 0.57 and 3.10 mg/kg, and in the bottom layer (1.0 m) were 2.57 and 3.72 mg/kg, respectively. In this study, risk assessment results based on the established exposure scenario and parameters showed that there was a significant difference in traffic hub land use under specific exposure pathway and common insensitive land use exposure pathways (direct ingestion of soil, dermal contact with soil, and inhalation of soil-derived dust). Commonly considered hexachlorobenzene and benzo(a)pyrene carcinogenic risk values exceeded the maximum acceptable level (10⁻⁶) and were found to be 23.9-fold and 189-fold higher than the carcinogenic risk values, respectively. Parameter sensitivity analysis data showed that for transportation use, the two parameters “EFOa” and “OSIRa” were the most significant factors associated with variation of the carcinogenic risk value. For traffic hub land use, urban road land use, and subway land use, the main exposure pathways were through “inhalation of soil vapors outdoors (from surface soil),” “direct ingestion of soil,” and “inhalation of soil vapors indoors (from bottom soil),” which contributed 84.75, 73.00, and 100.00% to the total risk value, respectively.

     

A Field Intercomparison and Fundamental Characterization of Various Dust Samplers with a Reference Sampler

The European Economic Community Council Directive 80/779/EEC¹ describes air quality limit values and guide values for sulfur dioxide and suspended particulates. However, article 10, paragraph 1 does not define well enough the reference method required, amongst others, for the gravimetric measurement of suspended particulates. It is explicity stated in article 10, paragraph 5 of the directive, that “the commission shall, in selected locations in the member states and in cooperation with the latter, carry out studies on the sampling…of suspended particulates. These studies shall be designed in particular to promote the harmonization of methods of sampling and analysis of these pollutants.” Therefore, in a joint research program the Umweltbundesamt (grant #104 02263), the commission of European Communities (grant #84-B-6642-11-017-11-N) and the U.S. EPA (grant #2-43211-3580) funded the development of a reference dust sampler by the Fraunhofer-lnstitute of Toxicology and Aerosol Research (FhITA, in Hannover, Federal Republic of Germany) in order: ? to study the particle size distribution of ambient air aerosol at a number of selected sites;

? to compare the results obtained with the reference dust sampler with those of particle samplers operated in Europe and the United States;

? to verify the applicability of wind tunnel results to sampling behaviour in the free atmosphere.

     

Techniques and Procedures for the Measurement of Aircraft Gas Turbine Engine Emissions

In 1968 the Society of Automotive Engineers formed the Committee on Aircraft Exhaust Emissions Measurement (E-31) whose charge was the development of acceptable standards of measurement for the characterization of aircraft engine exhaust. This committee’s efforts have resulted in the issuance of two Aerospace Recommended Practices, ARP 1179 “Aircraft Gas Turbine Exhaust Smoke Measurement” and ARP 1256 “Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines.” These Recommended Practices have in large part been adopted by the Environmental Protection Agency and promulgated in Federal Register Volume 38, Number 136, Tuesday, July 17, 1973.

For the past three years Pratt & Whitney Aircraft has been measuring emissions from aircraft gas turbine engines using on-line instrumentation systems designed both in accordance with these Aerospace Recommended Practices and in response to the operational needs of a large experimental engineering test facility. In addition to a discussion of these systems this paper describes the experience derived from continuous testing programs in support of this test facility with consideration being given to the specific problems of sampling, sample handling, system accuracy, and data recording and reduction. Comment is made as to the practical limitations of the recommended methods and procedures as applied to emission control technology programs and suggestions are presented for improving the measurement technology.     

A Reexamination of the Ozone Limiting Approach to Estimating Short-Term NO2 Concentrations

The partition and effective diffusion coefficients of formaldehyde were measured for three materials (conventional gypsum wallboard, “green” gypsum wallboard, and “green” carpet) under three relative humidity (RH) conditions (20%, 50%, and 70% RH). The “green” materials contained recycled materials and were friendly to environment. A dynamic dual-chamber test method was used. Results showed that a higher relative humidity led to a larger effective diffusion coefficient for two kinds of wallboards and carpet. The carpet was also found to be very permeable resulting in an effective diffusion coefficient at the same order of magnitude with the formaldehyde diffusion coefficient in air. The partition coefficient (K _ma) of formaldehyde in conventional wallboard was 1.52 times larger at 50% RH than at 20% RH, whereas it decreased slightly from 50% to 70% RH, presumably due to the combined effects of water solubility of formaldehyde and micro-pore blocking by condensed moisture at the high RH level. The partition coefficient of formaldehyde increased slightly with the increase of relative humidity in “green” wallboard and “green” carpet. At the same relative humidity level, the “green” wallboard had larger partition coefficient and effective diffusion coefficient than the conventional wallboard, presumably due to the micro-pore structure differences between the two materials. The data generated could be used to assess the sorption effects of formaldehyde on building materials and to evaluate its impact on the formaldehyde concentration in buildings.

Implications: Based on the results of this study, the sink effects of these commonly used materials (conventional and “green” gypsum wallboards, “green” carpet) on indoor formaldehyde concentration could be estimated. The effects of relative humidity on the diffusion and partition coefficients of formaldehyde were found to differ for materials and for different humidity levels, indicating the need for further investigation of the mechanisms through which humidity effects take place.     

Geostatistical characterization of the nitrogen dioxide concentration in an urban area: Part I: Spatial variability and cartography of the annual concentration

Maps of the annual average of the NO₂ concentration in an urban area are generally built from temporary seasonal measurements, as in 2001 at Mulhouse (France). To improve the precision of the estimation, auxiliary information about the environment can be used. Instead of kriging the average of the two seasonal measurements (in “winter” and in “summer”), cokriging these seasonal values guarantees the consistency of seasonal and annual estimations. Even more, cokriging allows the use of “incomplete series” at the sites measured during only one season. Based on cokriging, an optimization of the sampling is studied, while alternating the seasonal measurements on a part of the sites.Using the linear model of coregionalization, the fitting of simple and cross-variograms reveals a remarkable spatial decomposition of the seasonal concentrations. The different spatial components are interpreted in terms of physico-chemical processes of production, transformation or destruction of the NO₂ in urban atmosphere.     

Fine Particulate Organic Material in the Los Angeles Basin - I: Assessment of the High-Volume Brigham Young University Organic Sampling System,BIG BOSS

ABSTRACT

A multi-system, high-volume, parallel plate diffusion dénuder Brigham Young University Organic Sampling System (BIG BOSS) was tested using collocated samplers at the Pico Rivera Monitoring Station of the South Coast Air Quality Management District, South Coast Air Basin, in September 1994. Six-hr daytime and 9-hr nighttime samples were collected with a flow of about 200 L/min through each of the three systems designed to collect particles smaller than 2.5, 0.8, and 0.4 mm in a diffusion denuder sampler. Efficiency for the removal of gas phase organic compounds by the diffusion denuder was evaluated using both theoretical predictions and field measurements. Both measured and calculated data indicate high denuder efficiency for the removal of gas phase aromatic and paraffinic compounds. The precision of the BIG BOSS was evaluated using collocated samplers. The precision of determination of total carbon and elemental carbon retained by a quartz filter or of semi-volatile carbonaceous material lost from particles during sampling averaged ±7%. The precision of determination of individual organic compounds averaged ±10%. An average of 42 and 62% of the particulate organic material was semi-volatile organic compounds (SVOCs) lost from particles during sampling for daytime and nighttime samples, respectively. This “negative” sampling artifact was an order of magnitude larger than the “positive” quartz filter artifact due to adsorption of gas phase organic material. Daytime concentrations of fine particulate elemental carbon and nonvolatile organic carbon were higher than nighttime concentrations, but nighttime fine particles contained more semi-volatile organic material than daytime.     

“Hot” versus “Enlarged” Electrostatic Precipitation of Fly Ash: A Cost-Effectiveness Study

An article in the February 1974 issue of the Journal of the Air Pollution Control Association entitled “Hot” versus “Enlarged” Electrostatic Precipitation of Fly Ash: A Cost Effectiveness Study,¹ by D. R. Selzler and W. D. Watson, Jr., arrives at the generalized conclusion that “enlarged” precipitation is likely to be a less costly method of attaining high collection efficiencies for low sulfur fly ash. The basis of this conclusion is a multivariate regression analysis of 37 full-scale cold electrostatic precipitators. Using the predictive ability of the resulting equation, modified to include a 95% probability of attaining design efficiency, together with functions describing capital and operating costs, the authors arrived at the above conclusion.

It is our contention that while the overall approach presented is a good attempt to develop a more systematic method of attacking the problem and arriving at a generalized solution, there are many errors in the development which have resulted in incorrect conclusions. Among the more serious errors in this work is the development and acceptance of a regression model based on cold precipitation performance data which is not compatible with the observed performance of cold precipitators. The use of the same equation for hot precipitator sizing can also be shown to be invalid. Additionally, one of the basic parameters used by the authors to distinguish precipitation performance of coals is not meaningful for hot precipitation and of questionable validity for cold precipitation. And, finally, the authors do not appear to recognize that power input to the precipitator (actually power density) is a constrained function which can hardly ever be increased to levels defined by their “optimum” precipitator sizing.     

A Probability Model for Evaluating Building Contamination from an Environmental Event

ABSTRACT

Asbestos dust and bioaerosol sampling data from suspected contaminated zones in buildings allowed development of an environmental data evaluation protocol based on the differences in frequency of detection of a target contaminant between zones of comparison. Under the assumption that the two test zones of comparison are similar, application of population proportion probability calculates the significance of observed differences in contaminant levels. This was used to determine whether levels of asbestos dust contamination detected after a fire were likely the result of smoke-borne contamination, or were caused by pre-existing/background conditions.

Bioaerosol sampling from several sites was also used to develop the population proportion probability protocol. In this case, significant differences in indoor air contamination relative to the ambient conditions were identified that were consistent with the visual observations of contamination. Implicit in this type of probability analysis is a definition of “contamination” based on significant differences in contaminant levels relative to a control zone. Detection of a suspect contaminant can be assessed as to possible sources(s) as well as the contribution made by pre-existing (i.e., background) conditions, provided the test and control zones are subjected to the same sampling and analytical methods.     

An Air Quality Data Analysis System for Interrelating Effects,Standards, and Needed Source Reductions: Part 13— Applying the EPA Proposed Guidelines for Carcinogen Risk Assessment to a Set of Asbestos Lung Cancer Mortality Data

Abstract

The Clean Air Act Amendments of 1990 (CAAA-90) list 189 hazardous air pollutants (HAPs) for which “safe” ambient concentrations are to be determined. The primary purpose of this paper is to develop two mathematical models, lognormal and logarithmic, that effectively express excess lung cancer mortality as a function of asbestos concentration for an example set of data and also to suggest using these two models for additional HAPs. The secondary purpose of this paper is to calculate a “safe” asbestos concentration by first assuming a default linear extrapolation (to one excess death per million people, as specified for carcinogenic HAPs). The resulting “safe” concentration is an impossible-to-achieve 1/1000 of present background asbestos concentrations. A letter to the editor and a response in this Journal issue use additional asbestos data that suggest that the “safe” concentration should be about 730 times higher than first calculated here and that a default nonlinear extrapolation should be used instead, with the “safe” concentration proportional to the desired mortality level raised to the 0.39 power. These results suggest that the most important problem in setting a “safe” concentration for each carcinogenic HAP is to determine the correct nonlinear extrapolation to use for each HAP.     

Real-Time Measurements of Jet Aircraft Engine Exhaust

Abstract

Particulate-phase exhaust properties from two different types of ground-based jet aircraft engines—high-thrust and turboshaft—were studied with real-time instruments on a portable pallet and additional time-integrated sampling devices. The real-time instruments successfully characterized rapidly changing particulate mass, light absorption, and polycyclic aromatic hydrocarbon (PAH) content. The integrated measurements included particulate-size distributions, PAH, and carbon concentrations for an entire test run (i.e., “run-integrated” measurements). In all cases, the particle-size distributions showed single modes peaking at 20–40nm diameter. Measurements of exhaust from high-thrust F404 engines showed relatively low-light absorption compared with exhaust from a turboshaft engine. Particulate-phase PAH measurements generally varied in phase with both net particulate mass and with light-absorbing particulate concentrations. Unexplained response behavior sometimes occurred with the real-time PAH analyzer, although on average the real-time and integrated PAH methods agreed within the same order of magnitude found in earlier investigations.     

Analysing the fate of nanopesticides in soil and the applicability of regulatory protocols using a polymer-based nanoformulation of atrazine

For the first time, regulatory protocols defined in the OECD guidelines were applied to determine the fate properties of a nanopesticide in two agricultural soils with contrasting characteristics. The nanoformulation studied had no effect on the degradation kinetics of atrazine indicating that (1) the release of atrazine from the polymer nanocarriers occurred rapidly relative to the degradation kinetics (half-lives 36–53 days) and/or that (2) atrazine associated with the nanocarriers was subject to biotic or abiotic degradation. Sorption coefficients, derived from a batch and a centrifugation technique at a realistic soil-to-solution ratio, were higher for the nanoformulated atrazine than for the pure active ingredient. Results indicate that the nanoformulation had an effect on the fate of atrazine. However, since the protocols applied were designed to assess solutes, conclusions about the transport of atrazine loaded onto the nanocarriers should be made extremely cautiously. The centrifugation method applied over time (here over 7 days) appears to be a useful tool to indirectly assess the durability of nanopesticides under realistic soil-to-solution ratios and estimate the period of time during which an influence on the fate of the active ingredient may be expected. More detailed investigations into the bioavailability and durability of nanopesticides are necessary and will require the development of novel methods suitable to address both the “nano” and “organic” characteristics of polymer-based nanopesticides.     

Odor Control in Cattle Feed Yards

Commercial cattle-feeding is a large industry in the United States. In California, for instance, there are more than 500 commercial feedlots. Each of these lots handles from less than 500 to more than 50,000 head of cattle at one time. With the urban and suburban explosion, feedlots that were at one time many miles from residential centers are now “just across the street.” Naturally the high odor level from improperly operated yards gives rise to considerable complaint and citizen indignation.

A variety of methods to reduce odor to an acceptable level have been tried with varying results. A highly satisfactory procedure is based on “good housekeeping” practices, frequent removal of fecal material, and abatement of residual odor by spraying the lots at designated intervals with a solution of potassium permanganate. Details of the method are discussed.