The evaluation of the equilibrium partitioning method using sensitivity distributions of species in water and soil

The equilibrium partitioning method (EqP-method) can be used to calculate soil quality standards (expressed in mg/kg) from aquatic quality standards (expressed in microg/l) using a partitioning coefficient. The validity of this application of the EqP-method was studied comparing aquatic with terrestrial toxicity data. The data set collected for deriving environmental quality standards in the Netherlands, was used for this study. For 10 organic substances (chlorpyrifos, atrazine, carbofuran, pentachlorophenol, chlordane, aldrin, trichlorobenzene, heptachlor, trichlorophenol and trichloroethene) and for 8 metals, sufficient data were available. The aquatic toxicity data were multiplied by the partitioning coefficient in order to obtain aquatic data expressed in mg/kg. For some compounds the terrestrial toxicity data were significantly higher than the aquatic data but for other compounds it was the other way around. These differences indicate that the EqP-method can give significant over-or underestimations, due to inaccurate partitioning coefficients or differences in species sensitivities. These over- or underestimations can have an impact on the setting of environmental quality standards which are based on the hazardous concentration 5% (HC5) values. The uncertainty in the calculation of HC5 values attributed to the use of the EqP-method, was quantified. The HC5 values derived using the EqP-method were in 5% of the cases more than 20 times higher than the corresponding HC5 values that were derived directly from soil toxicity tests. Despite of this uncertainty the use of the EqP-method can still be advocated for setting soil quality guidelines when only a very limited number of terrestrial toxicity data are available.     

Terrestrial ecotoxicity and effect factors of metals in life cycle assessment (LCA)

Life cycle impact assessment aims to translate the amounts of substance emitted during the life cycle of a product into a potential impact on the environment, which includes terrestrial ecosystems. This work suggests some possible improvements in assessing the toxicity of metals on soil ecosystems in life cycle assessment (LCA). The current available data on soil ecotoxicity allow one to calculate the chronic terrestrial HC50(EC50) (hazardous concentration affecting 50% of the species at their EC50 level, i.e. the level where 50% of the individuals of the species are affected) of nine metals and metalloids (As(III) or (V), Be(II), Cr(III) or (VI), Sb(III) or (V), Pb(II), Cu(II), Zn(II) and Ni(II)). Contrarily to what is generally advised in LCIA, the terrestrial HC50 of metals shall not be extrapolated from the aquatic HC50, using the Equilibrium Partitioning method since the partition coefficient (K(d)) of metals is highly variable. The experimental ecotoxicology generally uses metallic salts to contaminate artificial soils but the comparison of the EC50 or NOEC obtained for the same metal with different salts reveals that the kind of salt used insignificantly influences these values. In contrast, depending on the metallic fraction of concern, the EC50 may vary, as for cadmium: the EC50 of Folsomia candida, expressed as free Cd in pore water is almost 2.5 orders of magnitude lower than that expressed as total metal. A similar result is obtained with Eisenia fetida, confirming the importance of metals speciation in assessing their impact on soils. By ranking the metals according to the difference between their terrestrial and aquatic HC50 values, two groups are distinguished, which match the hard soft acids and bases (HSAB) concept. This allows to estimate their affinity for soil components and potential toxicity according to their chemical characteristics.     

Comparative toxicity of acrylic acid to marine and freshwater microalgae and the significance for environmental effects assessments.

In this study, we compared the sensitivity of freshwater and marine organisms to two structurally similar substances, acrylic acid and methacrylic acid. Reported acute toxicity data (L(E)C50-values) for freshwater organisms range from 0.1 to 222 mg/l and 85 to >130 mg/l for acrylic acid and methacrylic acid, respectively. The large variation in toxicity data for acrylic acid is due to a specific toxicity to certain species of freshwater microalgae, with algae EC50-values being two to three orders of magnitude lower than L(E)C50-values reported for fish and invertebrates. To evaluate the sensitivity of marine organisms, ecotoxicity data was generated for ten species of microalgae, one invertebrate species and one fish species. For methacrylic acid, we found a marine acute toxicity that ranged from 110 to >1260 mg/l, which is comparable to reported data on freshwater organisms. In strong contrast, the resulting L(E)C50-values for acrylic acid ranged from 50 to >1000 mg/l, and there was no specific sensitivity of marine algae when compared to marine invertebrates and fish. For acrylic acid, therefore, use of the available freshwater toxicity data for an effects assessment for the marine environment is likely to overestimate the hazard and risk from this substance. Overall, the results of the study suggest that ecotoxicity data generated on freshwater species may not always be appropriate for the effects assessments of organic chemicals in the marine environment, thus emphasising the importance of using ecologically relevant data to assess environmental risk.     

Comparing aquatic risk assessment methods for the photosynthesis-inhibiting herbicides metribuzin and metamitron

Three different risk assessment procedures are described that aim to protect freshwater habitats from risks of the photosynthesis-inhibiting herbicides metribuzin and metamitron. These procedures are (1) the first-tier approach, based on standard toxicity tests and the application of an assessment factor, (2) the Species Sensitivity Distribution (SSD) approach, based on laboratory tests with a wider array of species and the application of a statistical model to calculate the HCx (the Hazardous Concentration for x% of the species), and (3) the model ecosystem approach, based on the evaluation of treatment-related effects in field enclosures. A comparison of the risk assessment procedures reveals that the first-tier approach is the most conservative for metamitron and metribuzin, and that HC5 values (and even HC10 values) based on acute EC50 values of algae and aquatic vascular plants may be used to derive maximum permissible concentrations for single applications. For both compounds these HC5 values were very similar to the ecological threshold concentrations in the enclosure studies. In contrast to model ecosystem experiments, however, HCx values based on lab toxicity tests do not provide information on the recovery potential of sensitive endpoints and on indirect effects, which may be important for regulatory decision-making. In the enclosure study, indirect effects of metribuzin on invertebrate populations were observed at an exposure concentration that was approximately 20 times lower than the corresponding HC5 value based on lab toxicity data for aquatic invertebrates.     

Sensitivity of hypogean and epigean freshwater copepods to agricultural pollutants

Widespread pollution from agriculture is one of the major causes of the poor freshwater quality currently observed across Europe. Several studies have addressed the direct impact of agricultural pollutants on freshwater biota by means of laboratory bioassays; however, as far as copepod crustaceans are concerned, the ecotoxicological research is scarce for freshwater species and almost nonexistent for the hypogean ones. In this study, we conducted a comparative analysis of the available literature data on the sensitivity of freshwater copepods to agricultural pollutants. We also assessed the acute and chronic sensitivity of a hypogean and an epigean species, both belonging to the Crustacea Copepoda Cyclopoida Cyclopidae, to two N-fertilizers (urea and ammonium nitrate) and two herbicides (ARIANE^TM II from Dow AgroSciences LLC, and Imazamox), widely used for cereal agriculture in Europe. According to the literature review, freshwater copepods are sensitive to a range of pesticides and N-fertilizers. Ecotoxicological studies on hypogean species of copepods account only one study. There are no standardized protocols available for acute and chronic toxicity tests for freshwater copepods, making comparisons about sensitivity difficult. From our experiments, ionized ammonia proved to be more toxic than the herbicide Imazamox, in both short and chronic bioassays. Urea was the less toxic chemical for both species. The hypogean species was more sensitive than the epigean one to all chemicals. For both species and for all tested chemicals, acute lethality and chronic lethality were induced at concentrations higher than the law limits of good water body quality in Europe, except for ionized ammonia, which provoked the chronic lethality of the hypogean species at a lower concentration. The hazardous concentration (HC) of un-ionized ammonia for 5 % of freshwater copepods, obtained by a species sensitivity distribution, was 92 μg l^?1, significantly lower than the HC computed for traditional test species from freshwater environments.     

Priority assessment of toxic substances in life cycle assessment. Part I: calculation of toxicity potentials for 181 substances with the nested multi-media fate, exposure and effects model USES-LCA

Toxicity potentials are standard values used in life cycle assessment (LCA) to enable a comparison of toxic impacts between substances. In most cases, toxicity potentials are calculated with multi-media fate models. Until now, unrealistic system settings were used for these calculations. The present paper outlines an improved model to calculate toxicity potentials: the global nested multi-media fate, exposure and effects model USES-LCA. It is based on the Uniform System for the Evaluation of Substances 2.0 (USES 2.0). USES-LCA was used to calculate for 181 substances toxicity potentials for the six impact categories freshwater aquatic ecotoxicity, marine aquatic ecotoxicity, freshwater sediment ecotoxicity, marine sediment ecotoxicity, terrestrial ecotoxicity and human toxicity, after initial emission to the compartments air, freshwater, seawater, industrial soil and agricultural soil, respectively. Differences of several orders of magnitude were found between the new toxicity potentials and those calculated previously.     

Life cycle toxicity assessment of pesticides used in integrated and organic production of oranges in the Comunidad Valenciana, Spain

The relative impacts of 25 pesticides including acaricides, fungicides, herbicides, insecticides, and post-harvest fungicides, used in the production of oranges in Spain were assessed with current life cycle impact assessment (LCIA) tools. Chemical specific concentrations were combined with pesticide emission data and information on chemical toxicity to assess human toxicity and freshwater ecotoxicity impacts. As a case study, the relative impacts of two orange production systems in the region of Valencia, integrated pest management (IP) and organic production (OP), were assessed. The evaluation of active ingredients showed that on average acaricides have the highest human toxicity impact scores, while for freshwater ecotoxicity insecticides show the highest impact. In both impact categories the lowest impact scores were calculated for herbicides. In the production of 1 kg of orange fruits, where several kinds of pesticides are combined, results show that post-harvest fungicides can contribute more than 95% to the aggregate human toxicity impacts. More than 85% of aquatic ecotoxicity is generated by fungicides applied before harvest. The potential to reduce impacts on freshwater ecosystems is seven orders of magnitude, while impacts on human health can be reduced by two orders of magnitude. Hence, this stresses the importance of a careful pre-selection of active ingredients. In both impact categories, organic production represents the least toxic pest-control method.     

Terrestrial and aquatic ecotoxicity assessment of Cr(VI) by the ReCiPe method calculation (LCIA): application on an old industrial contaminated site

The most stable forms of chromium in the environment are chromium (III) and chromium (VI), the former being relatively immobile and necessary for organisms, and the latter being highly soluble and toxic. It is thus important to characterise ecotoxicological impacts of Cr(VI). However, there are still some important uncertainties in the calculation of ecotoxicological impacts of heavy metals in the LCIA global approach. The aim of this paper is to understand how the spatial and dynamic characterization of life cycle inventory (LCI) data can be exploited in life cycle impact assessment and particularly for the evaluation of the aquatic and terrestrial ecotoxicity of Cr(VI). To quantify these impacts, we studied an industrial waste landfill in the North of France that was contaminated with chromium. On the polluted area, the aquatic contamination is due to the slag heap as well as to chromium spots in soil. The soil contamination is mainly due to infiltration of chromium from the infill. The concentration of Cr(VI) in soil and water varies according to seasonal climatic variations and groundwater level. These variations have an effect on the Cr(VI) fate factor, in particular on transfer and residence time of the substance. This study underlines the spatial distribution of aquatic ecotoxicity and the temporal variation of freshwater ecotoxicity. We analysed the correlation between precipitation, temperature, concentration and ecotoxicity impact. With regards to the terrestrial ecotoxicity, the study focused on the vertical variation of the ecotoxicity and the major role of the soil layer composition into terrestrial pollution.     

Sensitivity of characteristic riverine insects, the caddisfly Cyrnus trimaculatus and the mayfly Ephoron virgo, to copper and diazinon

This study reports the effects of two model toxicants, copper and diazinon, on two characteristic riverine insect species, the caddisfly Cyrnus trimaculatus and the mayfly Ephoron virgo. It was demonstrated that these species are very sensitive to both compounds in comparison with aquatic insects traditionally used in ecotoxicity tests. For diazinon, the 96-h LC(50) value of Cyrnus trimaculatus (1.1 microg/l) is lower than for any other insect species known from the literature and for copper it was demonstrated that Ephoron virgo is among the most sensitive aquatic insect species. The observed low LC(50) values stress the importance of using these indigenous species in assessing the risk of environmental contaminants in large European rivers and in defining conditions for ecological recovery.     

Use of freshwater plants for phytotoxicity testing: a review

Phytotoxicity data for aquatic plants have served a relatively minor role in regulatory decisions concerning the environmental hazard of most potential contaminants. A variety of phytotoxicity tests have been conducted with freshwater green algae, duckweed, blue-green algae, diatoms and rooted macrophytes (whole plants and seeds). Several test methods have been standardized for microalgae which are used primarily with chemicals, effluents, contaminated sediment elutriates and hazardous waste leachates. Current scientific understanding concerning the phytotoxic effects of these contaminants is based mostly on results for a few green algae. The greatest limitation of these results is their uncertain environmental relevance due to the large interspecific variation in response of standard algal test species and the unrealistic experimental test conditions. Results of the few field validation toxicity tests conducted to resolve this uncertainty have been chemical-specific and unpredictable. Aquatic vascular plants have been used less frequently than algae as test species. Duckweeds have been used more often than rooted submersed species but the uncertain nature of their sensitivities relative to animal and other plant species has limited their use. Regulatory interest in wetland protection, contaminated sediment evaluations and sediment quality criteria development will result in increased use of whole rooted plants and their seeds as test species. Overall, regardless of the test species, if phytotoxicity data are to be more available and effective in the hazard assessment process, additional information concerning species sensitivity, and environmental relevance of the results will be needed.     

Molecular docking: A potential tool to aid ecotoxicity testing in environmental risk assessment of pharmaceuticals

A cocktail of human pharmaceuticals pollute aquatic environments and there is considerable scientific uncertainty about the effects that this may have on aquatic organisms. Human drug target proteins can be highly conserved in non target species suggesting that similar modes of action (MoA) may occur. The aim of this work was to explore whether molecular docking offers a potential tool to predict the effects of pharmaceutical compounds on non target organisms. Three highly prescribed drugs, diclofenac, ibuprofen and levonorgestrel which regularly pollute freshwater environments were used as examples. Their primary drug targets are cyclooxygenase 2 (COX2) and progesterone receptor (PR). Molecular docking experiments were performed using these drugs and their primary drug target homologues for Danio rerio, Salmo salar, Oncorhynchus mykiss, Xenopus tropicalis, Xenopus laevis and Daphnia pulex. The results show that fish and frog COX2 enzymes are likely to bind diclofenac and ibuprofen in the same way as humans but that D. pulex would not. Binding will probably lead to inhibition of COX function and reduced prostaglandin production. Levonorgestrel was found to bind in the same binding pocket of the progesterone receptor in frogs and fish as the human form. This suggests implications for the fecundity of fish and frogs which are exposed to levonorgestrel. Chronic ecotoxicological effects of these drugs reported in the literature support these findings. Molecular docking may provide a valuable tool for ecotoxicity tests by guiding selection of test species and incorporating the MoA of drugs for relevant chronic test end points in environmental risk assessments.     

Do aquatic effects or human health end points govern the development of sediment-quality criteria for nonionic organic chemicals ?

The equilibrium partitioning theory may be used to describe the partitioning of nonionic organic chemicals between water, sediment, and aquatic biota. This paradigm was employed to compare the relative magnitudes of organic carbon-normalized sediment-quality criteria that are intended to protect either benthic organisms from the direct toxic effects of sediment-associated chemicals or humans from the indirect health effects posed by the ingestion of contaminated aquatic animals. Comparison of calculated sediment-quality criteria for a variety of hydrophobic chemicals suggests that human health-based end points often result in more restrictive criteria than aquatic effects-based values. Review of published field data indicates that the equilibrium partitioning paradigm may, depending on contaminant class, either over- or underestimate the extent to which sediment-associated contaminations are bioaccumulated. Despite the limitations of adopting this simple theory for criteria development, calculations reveal that regulatory decisions involving sediments contaminated with such chemicals may be dictated by human health concerns if current risk assessment methodologies are applied.     

Tissue concentrations, bioaccumulation, and biomagnification of synthetic musks in freshwater fish from Taihu Lake, China

Synthetic musks are ubiquitous pollutants in aquatic environments. As hydrophobic chemicals, they can accumulate in terrestrial and aquatic organisms. Investigations into the bioaccumulation of these chemicals in aquatic ecosystem have, however, been limited, and previous results were inconsistent among species and ecosystem. Studies on this topic have been carried out in European countries, the USA, and Japan, but very few are known of the situation in China. The aim of this study was to investigate contaminant levels of musks in fish from Taihu Lake, the second largest freshwater lake in China, as well as bioaccumulation and biomagnification of the pollutants in the freshwater food chain. Five polycyclic musks and two nitro musks were determined in 24 fish species and nine surface sediment samples from Taihu Lake. HHCB (1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta[γ]-2-benzopyran) and AHTN (7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene) were the predominant contaminants in the fish samples, with concentrations ranging from below the limit of detection (LOD) to 52.9 and from <LOD to 7.5 ng/g lipid weight, respectively. Other contaminants were at low detection frequencies. The results indicated low concentrations of musks yet widespread occurrence of these contaminants in fish from Taihu Lake. Species-specific and lipid-related bioaccumulation characteristics were suggested, but no significant region-specific differences were observed. Normalized biota-sediment accumulation factors for HHCB and AHTN were noted to increase with trophic levels in fish. Trophic magnification factors were estimated at 1.12 for HHCB and 0.74 for AHTN. A biomagnification for HHCB, and probably biodilution for AHTN, in the freshwater food chain are indicated, when trophic magnification factors were concerned. However, the correlations between logarithmic concentrations of the chemicals and trophic levels were not statistically significant. Further study using long food chains in this lake is still needed.     

Germination and seedling growth of the water cress Rorippa sp. exposed to the chelant [S,S]-EDDS

With the implementation of the new EU environmental framework directives, high tier risk assessments of chemicals will be increasingly needed. For high production chemicals, additional tests will complement the standard battery for aquatic toxicity assessments (daphnids, algae, and fish). In the context of a new chemical notification at the European Union level, we have developed a seed germination and root elongation toxicity test with the freshwater aquatic plant Rorippa nasturtium-aquaticum (water cress) to confirm the low environmental risk of the chelant [S,S]-EDDS. A 14 day semi-static growth inhibition test was conducted with daily renewal of the test solution. No concentration related inhibition was found on the basis of any of the criteria investigated, i.e., time and extent of germination, biomass, number of leaves, stalk and root lengths. The no-observed effect concentration was considered to be >or=387 mg SS-EDDS/l. Although germination was selected as an appropriate endpoint to assess the effect of a chelant on an aquatic plant (other endpoints would have been dependant on essential metals that are chelated in standard culture tests), the absence of dose related effects requires further tests with higher exposure concentrations and/or other toxicant(s) to assess the validity of the test as a general tool for aquatic risk assessment.     

Geochemistry and toxicity of sediment porewater in a salt-impacted urban stormwater detention pond

A comprehensive study was carried out to investigate the impacts of road salts on the benthic compartment of a small urban detention facility, Rouge River Pond. Although the pond is an engineered water body, it is representative of many small urban lakes, ponds and wetlands, which receive road runoff and are probable high impact areas. Specific objectives of the study were to document the porewater chemistry of an aquatic system affected by elevated salt concentrations and to carry out a toxicological assessment of sediment porewater to determine what factors may cause porewater toxicity. The results indicate that the sediment porewater may itself attain high salt concentrations. The computations show that increased chloride levels have important implications on the Cd complexation, augmenting its concentration in porewater. The toxicity tests suggest that the toxicity in porewater is caused by metals or other toxic chemicals, rather than high levels of chloride.     

Ecotoxicological Characterisation and Classification of Existing Chemicals

GOAL, SCOPE AND BACKGROUND: In 1998, the International Council of Chemical Associations (ICCA) launched a global initiative to investigate more than 1,000 HPV chemicals (High Production Volume, > or = 1,000 t/a) within the refocused OECD HPV Chemicals Programme. Up to the OECD SIDS Initial Assessment Meeting in April 2004 (SIAM 18) 147 ICCA dossiers (ca. 230 CAS-No) have been assessed based on a harmonised data set. The environmental profile and an ecotoxicological characterisation of these chemicals are presented here. Data for acute aquatic toxicity were correlated among each other, as well as data for fish (LC50, LD50) and rodents (LD50). The data for acute aquatic toxicity are compared with other existing chemicals. METHODS: Data of the ICCA HPV chemicals from the OECD SIAM 11-18 are presented for: log Kow (as an indicator for bioaccumulation potential), biodegradation, acute aquatic toxicity and availability of long-term toxicity data. Correlation analysis was performed with log transformed data and a linear regression model was fitted to the data, if a significant correlation was found. Acute toxicity for fish and acute oral toxicity for rodents were correlated on a molar basis. Acute aquatic toxicity of the chemicals is compared with data from BUA reports 1-234 and a random EINECS sample (Knacker et al. 1995). RESULTS AND DISCUSSION: According to the dossier information, 71 of the 147 ICCA chemicals are not 'readily biodegradable', 21 have a log Kow > or = 3, and 44 are 'toxic' (LC/EC50 < or = 10 mg/L) or 'very toxic' (LC/EC50 < or = 1 mg/L) to aquatic organisms. For 77, only the base set (acute fish, Daphnia and algae) is available, for the rest at least one long-term test (fish or Daphnia) is available and three tests for a mere 14 others. Based on the data presented, the SIAM gives recommendations for Environment and Human Health. 22 chemicals have been identified as a 'candidate for further work' for Environment and 16 for Human Health. The highest correlation coefficient was obtained correlating fish and Daphnia (r2 = 0.79). LC50 (fish) is significantly correlated with LD50 (rodent), but data are widely scattered. The correlation is not improved after transforming LC50 (fish) to LD50 (fish), using BCF QSAR. Based on acute aquatic toxicity, 25.1% of the chemicals from the BUA reports 1-234 are classified as 'very toxic' (LC/EC50 < or = 1 mg/L). This proportion is 2.5-fold higher than the ICCA HPV chemicals and 1.4-fold higher than the random EINECS sample. CONCLUSIONS: Correlation coefficients for aquatic toxicity data are rather uniform (0.57-0.79) compared with literature data, but also the best correlation was observed between fish and Daphnia. Because the scatter around the regression lines is still considerable, simple predictions of ecotoxicity between species are not possible. Correlation of LC50 (fish) and LD50 (rodent) indicates that toxicity is different. Surprisingly, the correlation of fish and rodent toxicity is not improved by transforming LC50 values to internal LD50s. The selection of ICCA chemicals by market significance (production volume) leads to a classification of toxicity, which is more comparable to a random sample of EINECS chemicals than to German BUA chemicals. The latter were chosen for concern (for Environment or Human Health). RECOMMENDATIONS AND OUTLOOK: Of 147 dossiers assessed between SIAM 11-18, ca. 75% were sponsored by the three following countries: Germany (42), USA (37) and Japan (33). The current output is about 50 dossiers per year (70-100 CAS-No), but a trend for an increase of output is noticeable. Industry, national authorities, and OECD work on a further development to speed up the output. The number of chemicals with 'low priority for further work' and the work recommended for the 'candidates' (mainly exposure assessment) indicate that the data presented were adequate for an initial hazard assessment according to OECD requirements. From the ICCA HPV list (n = 880, state of 1999) 44% of the chemicals have data available to cover all SIDS endpoints for Environment and only 33% for Human Health (Allanou et al. 1999). This indicates the importance of the Initiative to provide information on existing chemicals. The authors agree with the expectation "...that the scientific information provided by this global initiative will be considered as an internationally accepted and harmonised basis for further steps of chemicals management." (ICCA 2002 b).     

Comparative acute toxicity of organic pollutants and reference values for crustaceans. I. Branchiopoda, Copepoda and Ostracoda

The acute toxicity of 468 organic pollutants to planktonic crustaceans (Branchiopoda, Copepoda and Ostracoda) from pre-existing data was compared by means of statistical analysis and relative tolerance indices (Trel). A surrogate species commonly used in toxicity bioassays (Daphnia magna) showed toxicity levels--within one order of magnitude--similar to all other Cladocera species, at least for 82% of the chemicals studied. All neurotoxic insecticides except neonicotinoids, PCBs, organometallic compounds and PAHs are the most toxic substances to these organisms. Sensitivity levels among taxa were compared for individual chemicals as well as groups of chemicals with similar characteristics. Whilst there are marked differences in sensitivity among taxa and particular groups of chemicals, no consistent trends were found for freshwater and saltwater species in relation to the latter groups. No correlation between LC50 and size of these organisms was found other than by chance, making extrapolations based on allometric equations impossible.     

Atmospheric fate of non-volatile and ionizable compounds

A modified version of the Multimedia Activity Model for Ionics MAMI, including two-layered atmosphere, air-water interface partitioning, intermittent rainfall and variable cloud coverage was developed to simulate the atmospheric fate of ten low volatility or ionizable organic chemicals. Probabilistic simulations describing the uncertainty of substance and environmental input properties were run to evaluate the impact of atmospheric parameters, ionization and air-water (or air-ice) interface enrichment.The rate of degradation and the concentration of OH radicals, the duration of dry and wet periods, and the parameters describing air-water partitioning (K_AW and temperature) and ionization (pK_a and pH) are the key parameters determining the potential for long range transport. Wet deposition is an important removal process, but its efficiency is limited, primarily by the duration of the dry period between precipitation events.Given the underlying model assumptions, the presence of clouds contributes to the higher persistence in the troposphere because of the capacity of cloud water to accumulate and transport non-volatile (e.g. 2,4-D) and surface-active chemicals (e.g. PFOA). This limits the efficiency of wet deposition from the troposphere enhancing long-range transport.     

A possible simplification of the Goss-modified Abraham solvation equation

Abraham solvation equations find widespread use in environmental chemistry and pharmaco-chemistry. Recently Goss proposed a modified Abraham solvation equation. For various partitioning processes, the present study investigates the consequences for the fit when the Abraham solvation parameter V is left out of this modified solvation equation. For air-organic solvent partition, the Abraham solvation parameter V can be omitted from the Goss-modified Abraham solvation equation without any loss of statistical quality. For air–water partitioning, organic biphasic system partitioning, as well as water-organic solvent partitioning, omitting the V parameter from the Goss-modified Abraham solvation equation leads to only a small deterioration of statistic quality.     

A comparison of statistical methods for deriving freshwater quality criteria for the protection of aquatic organisms

Species sensitivity distributions (SSDs) are increasingly used in both ecological risk assessment and derivation of water quality criteria. However, there has been debate about the choice of an appropriate approach for derivation of water quality criteria based on SSDs because the various methods can generate different values. The objective of this study was to compare the differences among various methods. Data sets of acute toxicities of 12 substances to aquatic organisms, representing a range of classes with different modes of action, were studied. Nine typical statistical approaches, including parametric and nonparametric methods, were used to construct SSDs for 12 chemicals. Water quality criteria, expressed as hazardous concentration for 5 % of species (HC₅), were derived by use of several approaches. All approaches produced comparable results, and the data generated by the different approaches were significantly correlated. Variability among estimates of HC₅ of all inclusive species decreased with increasing sample size, and variability was similar among the statistical methods applied. Of the statistical methods selected, the bootstrap method represented the best-fitting model for all chemicals, while log-triangle and Weibull were the best models among the parametric methods evaluated. The bootstrap method was the primary choice to derive water quality criteria when data points are sufficient (more than 20). If the available data are few, all other methods should be constructed, and that which best describes the distribution of the data was selected.