Screening analysis of volatile organic contaminants in commercial inorganic coagulants used for drinking water treatment

A method for quality screening is suggested to detect volatile impurities in inorganic coagulants that are used for drinking water treatment. Static headspace gas chromatography with mass spectrometry detection (HS–GCMS) is sensitive and selective to detect volatiles in low concentrations. This study has discovered that volatile organic impurities are detectable in ferric and aluminium-based coagulants which are used for drinking water treatment. For ferric chloride, 2-propanol was detected at a level of 17–24 μg ml⁻¹, acetone at 0.7–1.7 μg ml⁻¹, 1,1,1-trichloroacetone at 0.02–0.04 μg ml⁻¹, trichloromethane at 0.01–0.02 μg ml⁻¹ and toluene at 0.01–0.12 μg ml⁻¹. For ferric chloride sulfate, acetone was detected at a level of 0.12 μg ml⁻¹, 1,1,1-trichloroacetone at 0.06–0.08 μg ml⁻¹, trichloromethane at 0.13–0.23 μg ml⁻¹, bromodichloromethane at 0.04–0.06 μg ml⁻¹ and dibromochloromethane at 0.04–0.05 μg ml⁻¹. For aluminium hydroxide chloride, only trichloromethane was detectable, but below the method detection limits (MDL). Although the concentrations of these impurities in commercial coagulants are low, this observation is important and should have impact on water industries for them to pay attention to the chemicals they are using for drinking water production.     

Age dependency of high-affinity ouabain receptors and their magnetosensitivity

Age dependency of [³H]-ouabain binding, ⁴⁵Ca²⁺ eflux and its magnetosensitivity in rats’ brain cortex and heart muscle tissues were studied. Curves of dose-dependent [³H]-ouabain binding consisted of three components with different affinities (10⁻⁷–10⁻⁴ M (α₁); 10⁻⁹–10⁻⁷ M (α₂); and 10⁻¹¹–10⁻⁹ M (α₃)). These curves were also characterized by different dose-dependent kinetics. [³H]-ouabain binding with α₃ receptors in brain cortex and heart muscle tissues of young and adult animals had a dose-dependent character, while that in old ones had a dose-independent character. A 0.2 T static magnetic field (SMF) exposure had modulation effect on ouabain binding with α₁, α₂ and α₃ receptors in young rats, while in adult ones, only α₃ receptors were magnetosensitive. In old animals, SMF exposure had no significant effect on ouabain binding with α₃ receptors in brain cortex, while in heart muscle, it had inhibitory effect on it. Age-dependent effect of ouabain impact on ⁴⁵Ca²⁺ efflux showed that all concentrations of ouabain lead to inhibitory effect in young animals’ brain cortex and heart muscle (with the exception of 10⁻¹⁰ and 10⁻⁶ M), while in old ones, it had activation effect as compared with data received without ouabain. SMF exposure in young animals had activation effect on ⁴⁵Ca²⁺ efflux from brain cortex and heart muscle in data without ouabain, and in old rats, ⁴⁵Ca²⁺ efflux from brain cortex was magnetic insensitive. In old animals, SMF increased ⁴⁵Ca²⁺ efflux even after extra low concentration of ouabain. It is suggested that α₃ receptors having a crucial role in the regulation of Na⁺/Ca²⁺ exchange serve as age-dependent magnetosensors of excitable cells.     

Volatilization characteristics of organic solutes in stirred solution

The effects of turbulence intensity (velocity gradient, G (s⁻¹)), Henry's law constant (H), and molecular weight (M) on the volatilization rates of organic compounds are examined using changes in the mass transfer coefficients (K_OL (cm/min)) under specific liquid-mixing intensities. The selected compounds were divided into three groups according to their H values (mole in gas/mole in liquid, dimensionless), which ranged from 10² to 10⁻⁵. The relationship of the K_OL relative to G, H and M was obtained via multiple regression. The obtained values of these parameters indicate that the primary factor affecting the K_OL values of the high H compounds is their M values. The effects of the H values on the K_OL values of the high H compounds can be neglected. On the other hand, the H value is the major factor determining the K_OL values of the low H compounds. The changes in the K_OL values of the different H compounds exhibit different profiles as the liquid-mixing intensity increases. The M and H values of middle H compounds possibly affect their K_OL values. The effects of the liquid-mixing intensity on the K_OL values of the organic compounds increase with increasing H values. The variation in the K_OL values might be a result of the concentration of the organic compounds at the interface between the liquid and gas films. The empirical relationship between K_OL and some selected parameters, G, H and M, is examined in this study. The obtained results can help to estimate volatilization loss of organic solutes in wastewater treatment facilities.     

A study on oxidative degradation of polyacrylamide in wastewater with UV/FENTON/C4H4O62−

The degradation of polyacrylamide (PAM) in simulate wastewater was studied in UV/Fenton/C₄H₄O₆^2? system. The factors such as molecular ratio of H₂O₂/Fe²⁺/C₄H₄O₆^2?, pH, and the dosage of Fenton reagent that could affect the PAM degradation in the UV/Fenton/C₄H₄O₆^2? system were investigated. The experimental results showed that adding C₄H₄O₆^2? to UV/Fenton system could form photosensitive ferrous complexes, which led to higher degradation efficiency of PAM. The degradation rate of PAM could be up to 95.2% under the following conditions: the concentration of H₂O₂, Fe²⁺, and C₄H₄O₆^2? were 22.5, 2.25, and 2.25 mmol/L, respectively (i.e., molecular ratio of H₂O₂/Fe²⁺/C₄H₄O₆^2? was 10:1:1), the pH value was 3.0.     

The determination and matching analysis of pinch point temperature difference in evaporator and condenser of organic rankine cycle for mixed working fluid

Exergo-economic analysis of the pinch point temperature difference (PPTD) in both evaporator and condenser of sub-critical organic Rankine cycle system (ORCs) are performed based on the first and second laws of thermodynamics. Taking mixture R13I1/R601a as a working fluid and the annual total cost per net output power Z as exergo-economic performance evaluation criterion, the effects of PPTD in evaporator ΔT_e, and the PPTD ratio of condenser to evaporator y, on the exergo-economic performance of ORCs are analyzed. Moreover, how some other parameters influence the optimal PPTD in evaporator ΔT_e,opt and the optimal PPTD ratio of condenser to evaporator y_opt are also discussed. It has been found that the exergo-economic performance of ORCs is remarkably influenced by ΔT_e and y, and there exists ΔT_e,opt and y_opt. In addition, ΔT_e,opt and y_opt are affected by heat transfer coefficient ratio of condenser to evaporator ß, the temperature of working fluid at dew point in condenser T_1a, and composition of R13I1/R601a: larger ß and T_1a lead to lower ΔT_e,opt and y_opt; by contraries, larger mass fraction of R13I1 makes ΔT_e,opt and y_opt increase, and y_opt increases linearly. The effects of the temperature of working fluid at bubble point in evaporator T_3a, mass flow rate of exhaust flue gas m_g, and inlet temperature of exhaust flue gas T_gi on ΔT_e,opt and y_opt are very slight. For comparison, three additional working fluids, namely R601a, R245fa, and 0.32R245fa/0.68R601a, are also taken into account.     

An assessment of ecosystem services of Corbett Tiger Reserve,India

This paper examines the economic value of selected ecosystem services of Corbett Tiger Reserve, India. The direct cost was derived from secondary sources, and indirect and opportunity costs through socioeconomic surveys. For recreational value the individual approach to travel cost method was used, and to assess carbon sequestration the replacement cost method was used. The maintenance cost of the reserve was estimated as US $2,153,174.3 year⁻¹. The indirect costs in terms of crop and livestock depredation by wild animals ranged from US $2,153,174.3 year⁻¹. The indirect costs in terms of crop and livestock depredation by wild animals ranged from US 2,408 to US $37,958 village⁻¹ over a period of 5 years. The dependence of local communities was for fuel wood (US $37,958 village⁻¹ over a period of 5 years. The dependence of local communities was for fuel wood (US 7,346 day⁻¹), fodder (US $5,290 day⁻¹), small timber, and other nontimber forest products. The recreational value of the reserve was estimated as US $5,290 day⁻¹), small timber, and other nontimber forest products. The recreational value of the reserve was estimated as US 167,619 year⁻¹. With the cost per visitor being US $2.5, the consumers’ surplus was large, showing the willingness of visitors to pay for wildlife recreation. The forests of the reserve mitigate carbon worth US $2.5, the consumers’ surplus was large, showing the willingness of visitors to pay for wildlife recreation. The forests of the reserve mitigate carbon worth US 63.6 million, with an annual flow of US $65.0 ha⁻¹ year⁻¹. The other benefits of the reserve include US $65.0 ha⁻¹ year⁻¹. The other benefits of the reserve include US 41 million through generation of electricity since 1972. The analysis reveals that, though the benefits outweigh costs, they need to be accrued to local communities so as to balance the distribution of benefits and costs.     

The Euler Number as an Index of Spatial Integrity of Landscapes: Evaluation and Proposed Improvement

The spatial integrity of a habitat or landscape is determined by the occurrence of habitat fragments and of perforations inside them. A landscape is said to have less spatial integrity with increasing numbers of fragments and perforations. The Euler number (ε) is a numerical measure of spatial integrity, based upon the difference |n _f −n _p | between the number of fragments (n _f ) and the number of perforations (n _p ). In this contribution, ε is evaluated, and an improvement is presented as a new index ε*, which is a combination of two metrics (ε _i , ε _d ) based on n _f and n _p . The term ε _i quantifies the intensity of perforation and/or fragmentation. The term ε _d measures the extent to which fragmentation predominates perforation, and vice versa. The intensity and dominance measures are combined into an Euclidean distance measure, generating the new ensemble value ε*, calculated as ε*= (n _f +n _p )⁻¹√[1 +n _f ²]. Use, sensitivity, and application of ε*, ε _i , and ε _d are illustrated using percolation maps. Application of the new metrics by environmental scientists is encouraged because (1) no negative values can be generated with ε*, ε _i , and ε _d ; (2) the range of ε*, ε _i , and ε _d is fixed; (3) process dominance and intensity are both assessed; (4) ε*, ε _i , and ε _d are easy to calculate and to interpret; and (5) ε* is not only based upon |n _f −n _p |, as ε is. Guidelines for practical use by means of a biplot of ε _i and ε _d are given.     

Soil Properties Predict Plant Community Development of Mitigation Wetlands Created in the Virginia Piedmont,USA

The study investigated vegetative and soil properties in four created mitigation wetlands, ranging in age from three to ten years, all created in the Virginia Piedmont. Vegetation attributes included percent cover, richness (S), diversity (H′), floristic quality assessment index (FQAI), prevalence index (PI), and productivity [i.e., peak above-ground biomass (AGB) and below-ground biomass]. Soil attributes included soil organic matter (SOM), gravimetric soil moisture (GSM), pH, and bulk density (D_b) for the top 10 cm. Species dominance (e.g., Juncus effusus, Scirpus cyperinus, Arthraxon hispidus) led to a lack of differences in vegetative attributes between sites. However, site-based differences were found for GSM, pH, and SOM (P < 0.001). Soil attributes were analyzed using Euclidean cluster analysis, resulting in four soil condition (SC) categories where plots were grouped based on common attribute levels (i.e., SC1 > SC2 > SC3 > SC4, trended more to less developed). When vegetation attributes were compared between SC groups, greater SOM, lower D_b, more circumneutral pH, and higher GSM, all indicative of maturation, were associated with higher H′ (P < 0.05), FQAI (P < 0.05), and total and volunteer percent cover (P < 0.05), and lower AGB (P < 0.001), PI (P < 0.05), and seeded percent cover (P < 0.05). The outcome of the study shows that site age does not necessarily equate with site development with soil and vegetation developmental rates varying both within and among sites. The inclusion of soil attributes in post-construction monitoring should be required to enhance our understanding and prediction of developmental trajectory of created mitigation wetlands.     

Role of Alternative Electron Acceptors (AEA) to control methane flux from waterlogged paddy fields: Case studies in the southern part of West Bengal, India

The rice fields, depleted of O₂, contain large amount of moisture and organic substrates to provide an ideal anaerobic environment for methanogenesis and are one of the principal anthropogenic sources of methane. In order to mitigate this emission Alternative Electron Acceptors (AEA) were altered in the soil. The experiments were carried out in four seasons at the site of Balarampur, near Baruipur, South 24 Parganas, West Bengal, namely September–December, 2005 (Cultivar: Sundari), February–May, 2006 (Cultivar: Sundari), September–December, 2006 and February–May, 2007 (Cultivar: Swarna-Pankaj). The seasonal average methane flux (Fe treated), for the cultivar type “Sundari” (season: September–December, 2005), is 4.41 t ha⁻¹, as compared to the value of 6.40 t ha⁻¹ for the untreated soil. Similarly for February–May, 2006, the seasonal average methane flux (Fe treated) is 5.52 t ha⁻¹, whereas the untreated flux is 5.69 t ha⁻¹. In the third and fourth seasons we had two treatments with Ammonium Thiosulphate and Ferric Hydroxide. The seasonal average methane flux (treatment: Ammonium Thiosulphate) is 4.35 t ha⁻¹ and 5.41 t ha⁻¹ respectively, whereas for the ferric hydroxide treated soil it is 4.35 t ha⁻¹ and 6.14 t ha⁻¹ respectively. The properties related to the nutrient quality of the harvested paddy seeds supplement these results.     

Regional impervious surface estimation: an urban heat island application

This paper describes a GIS-based estimation method that can be used to forecast future amounts of impervious surface as a mitigation measure for urban heat island effect in a metropolitan region. The method is unique because it employs a regression model that links the existing amount of impervious surface to population and employment at the census tract level. This approach provides a means to forecast future amounts of impervious surface based on projected population and employment. The method also includes a detailed analysis of high-resolution aerial photography to divide impervious surfaces into different categories. Subdividing impervious surfaces is necessary to evaluate potential urban heat island mitigation policies for different types of impervious surface. The analysis here shows that the impervious surface in the metropolitan Atlanta region will increase to 2638 km2 2. “The Albedo is defined as the hemispherical reflectivity averaged over the solar spectrum. A perfect reflector has a = 1, and a perfect absorber has a = 0” (Pomerantz et al. 1999 Pomerantz, M. 1999. Reflective surfaces for cooler buildings and cities. Philosophical magazine B, 79: 1457–1476. [Taylor & Francis Online], [Web of Science ®] [Google Scholar], p. 1458). View all notes in 2030, an increase of 45% from 2000. The most common type of impervious surface is dark-coloured pavement. Within this study area, the analyses showed that two-thirds of impervious surfaces are dark. Replacing dark pavement with light pavement materials, therefore, represents an important opportunity to mitigate the urban heat island effect in the Atlanta region.     

Kinetic studies on the adsorption of phenol, 4-chlorophenol,and 2,4-dichlorophenol from water using activated carbons

This study uses rate parameters in pseudo-first-order (PFO) and pseudo-second-order (PSO) equations (k₁ and k₂q_e, respectively) to judge the extent for approaching equilibrium in an adsorption process. Out of fifty-six systems collected from the literature, the adsorption processes with a k₂q_e value between 0.1 and 0.8 min^?1 account for as much as 70% of the total. These are classified as fast processes. This work compares the validity of PFO and PSO equations for the adsorption of phenol, 4-chlorophenol (4-CP), and 2,4-dichlorophenol (2,4-DCP) on activated carbons prepared from pistachio shells at different NaOH/char ratios. The activated carbons, recognized as microporous materials, had a surface area ranging from 939 to 1936 m²/g. Findings show that the adsorption of phenol, 4-CP, and 2,4-DCP on activated carbons had a k₂q_e value of 0.15–0.58 min^?1, reflecting the fast process. Evaluating the operating time by rate parameters revealed that k₂q_e was 1.6–1.8 times larger than k₁. These findings demonstrate the significance of using an appropriate kinetic equation for adsorption process design.     

Polyurethane rotating disc system for post-treatment of anaerobically pre-treated sewage

The performance of polyurethane rotating discs (RBC-1) versus polystyrene rotating discs (RBC-2) for the treatment of an up-flow anaerobic sludge blanket (UASB) reactor effluent fed with domestic wastewater was investigated. Both RBC units were operated at the same organic loading rate (OLR) of 10.5 gCOD/m² d. and a hydraulic retention time (HRT) of 2.5 h. The residual values of COD fractions (COD_suspended, COD_colloidal and COD_soluble) in the treated effluent of RBC-1 and RBC-2 were similar. However, the removal efficiency of ammonia in the RBC-1 (87 ± 4%) was significantly higher than that found for RBC-2 i.e. 24 ± 6%. Moreover, RBC-1 achieved a substantial removal efficiency of 99.0 ± 1% for Escherichia coli (E. coli), while RBC-2 removed 91.2 ± 0.3%. Based on these results, optimization of RBC-1 treating UASB reactor effluent was extensively performed. The RBC-1 was operated at an OLR's of 4.0, 11 and 23 gCOD/m² d. The results obtained showed that increasing the OLR from 11.0 to 23.0 gCOD/m² d and decreasing the HRT from 2.5 to 1.25 h significantly declined the effluent quality of COD_total and ammonia. However, the residual values of COD_total and ammonia remained unaffected when increasing the OLR from 4.0 to 11.0 gCOD/m² d and by decreasing the HRT from 5 to 2.5 h. Bacteriological examination showed that the mean residual count of E. coli remained at a level of 10⁴/100 ml, in the effluent of RBC-1 independent on the imposed HRT. Accordingly, it is recommended to operate RBC-1 for treatment of anaerobically pre-treated sewage at an OLR of 11 gCOD/m² d and an HRT of 2.5 h.A feed-less (ammonia limitation) period of 9.0 days followed by 9.0 days feeding with high OLR of 26 gCOD/m² d. (raw sewage) was investigated to elaborate, if the nitrifiers of the RBC-1 are capable to convert ammonia to nitrate after totally 18 days when retuning back to the normal operating conditions. The results of the experiment clearly show a strong and immediate detrimental effect of imposing high OLR of 26 gCOD/m² d on the nitrification process in the nitrifying RBC unit. However, after returning back to the original OLR of 10.6 gCOD/m² d, the nitrification efficiency in the RBC unit was recovered within 2–3 days.     

Study on the hydrolysis/precipitation behavior of Keggin Al13 and Al30 polymers in polyaluminum solutions

The hydrolysis/precipitation behaviors of Al³⁺, Al₁₃ and Al₃₀ under conditions typical for flocculation in water treatment were investigated by studying the particulates' size development, charge characteristics, chemical species and speciation transformation of coagulant hydrolysis precipitates. The optimal pH conditions for hydrolysis precipitates formation for AlCl₃, PAC_Al13 and PAC_Al30 were 6.5–7.5, 8.5–9.5, and 7.5–9.5, respectively. The precipitates' formation rate increased with the increase in dosage, and the relative rates were AlCl₃ ? PAC_Al30 > PAC_Al13. The precipitates' size increased when the dosage increased from 50 μM to 200 μM, but it decreased when the dosage increased to 800 μM. The Zeta potential of coagulant hydrolysis precipitates decreased with the increase in pH for the three coagulants. The iso-electric points of the freshly formed precipitates for AlCl₃, PAC_Al13 and PAC_Al30 were 7.3, 9.6 and 9.2, respectively. The Zeta potentials of AlCl₃ hydrolysis precipitates were lower than those of PAC_Al13 and PAC_Al30 when pH > 5.0. The Zeta potential of PAC_Al30 hydrolysis precipitates was higher than that of PAC_Al13 at the acidic side, but lower at the alkaline side. The dosage had no obvious effect on the Zeta potential of hydrolysis precipitates under fixed pH conditions. The increase in Zeta potential with the increase in dosage under uncontrolled pH conditions was due to the pH depression caused by coagulant addition. Al–Ferron research indicated that the hydrolysis precipitates of AlCl₃ were composed of amorphous Al(OH)₃ precipitates, but those of PAC_Al13 and PAC_Al30 were composed of aggregates of Al₁₃ and Al₃₀, respectively. Al³⁺ was the most un-stable species in coagulants, and its hydrolysis was remarkably influenced by solution pH. Al₁₃ and Al₃₀ species were very stable, and solution pH and aging had little effect on the chemical species of their hydrolysis products. The research method involving coagulant hydrolysis precipitates based on Al–Ferron reaction kinetics was studied in detail. The Al species classification based on complex reaction kinetic of hydrolysis precipitates and Ferron reagent was different from that measured in a conventional coagulant assay using the Al–Ferron method. The chemical composition of Al_a, Al_b and Al_c depended on coagulant and solution pH. The Al_b measured in the current case was different from Keggin Al₁₃, and the high Al_b content in the AlCl₃ hydrolysis precipitates could not used as testimony that most of the Al³⁺ was converted to highly charged Al₁₃ species during AlCl₃ coagulation.     

Metal contamination of surface water,sediment and <Emphasis Type="Italic">Tympanotonus fuscatus</Emphasis> var. <Emphasis Type="Italic">radula</Emphasis> of Iko River and environmental impact due to Utapete gas flare station,Nigeria

Inter-seasonal studies on the trace metal load of surface water, sediment and Tympanotonus fuscatus var. radula of Iko River were conducted between 2003 and 2004. The impact of anthropogenic activities especially industrial effluent, petroleum related wastes, gas flare and episodic oil spills on the ecosystem are remarkable. Trace metals analyzed included cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), lead (Pb), manganese (Mn), nickel (Ni), vanadium (V) and zinc (Zn). Sediment particle size analysis revealed that they were characteristically psammitic and were predominantly of medium to fine grained sand (>73%), less of silt (<15%) and clay (<10%). These results correlated with low levels of trace elements such as Pb (0.03 ± 0.02 mg kg⁻¹), Cr (0.22 ± 0.12 mg kg⁻¹), Cd (0.05 ± 0.03 mg kg⁻¹), Cu (0.04 ± 0.02 mg kg⁻¹) and Mn (0.23 ± 0.22 mg kg⁻¹) in the sediment samples. This observation is consistent with the scarcity of clayey materials known to be good scavengers for metallic and organic contaminants. Sediments indicated enhanced concentration of Fe, Ni and V, while other metal levels were relatively low. The concentrations of all the metals except Pb in surface water were within the permissible levels, suggesting that the petroleum contaminants had minimal effect on the state of pollution by trace metals in Iko River. Notably, the pollutant concentrations in the sediments were markedly higher than the corresponding concentrations in surface water and T. fuscatus tissues, and decreased with distance from point sources of pollution.     

Study on the failure mechanism of potassium-based sorbent for CO2 capture and the improving measure

With thermogravimetric apparatus (TGA), X-ray diffraction (XRD) and barium sulfate gravimetric methods, the carbonation reactivities of K₂CO₃ and K₂CO₃/Al₂O₃ in the simulated flue gases with SO₂ are investigated and the reaction equations are inferred. Results show that there are KHCO₃ and K₂SO₃ generated. The generation K₂SO₃ reduces the utilization ratio of the sorbent. H₂O may accelerates the sulfation reaction of AR K₂CO₃ as K₄H₂(CO₃)₃·1.5H₂O is generated in the reaction among K₂CO₃, SO₂ and H₂O. K₂SO₃ is directly generated from sulfation reaction of K₂CO₃/Al₂O₃, because there are K₂CO₃·1.5H₂O and K₂SO₃ generated in the reaction among K₂CO₃/Al₂O₃, SO₂ and H₂O. K₂CO₃·1.5H₂O does not react with SO₂, and K₂CO₃·1.5H₂O/Al₂O₃ reacts with SO₂ slowly. Compare with the reaction process without H₂O pretreatment, the reaction rates of KAl30 increased after H₂O pretreatment and the failure ratio is about a half of that without H₂O pretreatment. So, K₂CO₃/Al₂O₃ shows good carbonation and anti-sulfation characteristic after H₂O pretreatment.     

Utilization of waste product (tamarind seeds) for the removal of Cr(VI) from aqueous solutions: Equilibrium, kinetics, and regeneration studies

In the present study, an adsorbent was prepared from tamarind seeds and used after activation for the removal of Cr(VI) from aqueous solutions. The tamarind seeds were activated by treating them with concentrated sulfuric acid (98% w/w) at a temperature of 150 °C. The adsorption of Cr(VI) was found to be maximum at low values of initial pH in the range of 1–3. The adsorption process of Cr(VI) was tested with Langmuir, Freundlich, Redlich–Peterson, Koble–Corrigan, Tempkin, Dubinin–Radushkevich and Generalized isotherm models. Application of the Langmuir isotherm to the system yielded a maximum adsorption capacity of 29.7 mg/g at an equilibrium pH value ranging from 1.12 to 1.46. The adsorption process followed second-order kinetics and the corresponding rate constants obtained were 2.605 × 10⁻³, 0.818 × 10⁻³, 0.557 × 10⁻³ and 0.811 × 10⁻³ g/mg min⁻¹ for 50, 200, 300 and 400 mg/L of initial Cr(VI) concentration, respectively. The regenerated activated tamarind seeds showed more than 95% Cr(VI) removal of that obtained using the fresh activated tamarind seeds. A feasible solution is proposed for the disposal of the contaminants (acid and base solutions) containing high concentrations of Cr(VI) obtained during the regeneration (desorption) process.     

Bioaccumulation of metals in black mussels (Mytilus galloprovincialis) in Cape Town Harbour, South Africa

Heavy metal concentrations in black mussels (Mytilus galloprovincialis) collected from Cape Town Harbour were determined using energy dispersive X-ray fluorescence (EDXRF) and inductively coupled plasma-mass spectrometry (ICP-MS). EDXRF showed that tissue portions of the mussels contained K, Ca, Fe, Cu, Zn, Si, Sr, Al and Au, while the shell portion contained K, Ca, Fe, Cr, Zn, Si and Sr. In addition to these metals, EDXRF also revealed the presence of Al in the shells of the largest mussels. Highest concentrations of Cu and Zn were recorded in the tissues of the smallest mussels. Due to poorer detection limits of EDXRF, ultra-trace elements (Mn, Pb, As, Hg, V, Cr, Sn, Cd, Ni and Co) were determined in mussels using ICP-MS. The average metal concentrations found in the mussels are as follows; Pb (7.30 ± 0.67), Cd (1.98 ± 0.13), Hg (4.92 ± 0.60), As (6.94 ± 0.04), Sn (2.63 ± 0.13), Ni (1.88 ± 0.05), Cr (3.54 ± 0.05), V (4.17 ± 0.23), Co (0.74 ± 0.01) and Mn (35.20 ± 1.46). ANOVAs, Pearson correlation and principal component analysis (PCA) were employed in data analysis. The order of the abundance of metals in the mussels is Mn > Pb > As > Hg > V > Cr > Sn > Cd > Ni > Co. The average metal concentrations found in the mussels were higher than the permissible Food and Agriculture Organization (FAO) limits and other international guidelines.