Biogas production from pistachio (Pistaciavera L.) de-hulling waste

Pistachio processing wastes create significant waste management problems unless properly managed. However, there are not well-established methods to manage the waste generated during the processing of pistachios. Anaerobic digestion can be an attractive option not only for the management of pistachio processing wastes but also producing renewable energy in the form of biogas. This study investigated anaerobic digestibility and biogas production potential of pistachio de-hulling waste from wet de-hulling process. Best to our knowledge, this is the first report on biogas production from pistachio de-hulling waste. The results indicated that (1) anaerobic digestion of pistachio de-hulling wastewater, solid waste, and their mixtures in different ratios is possible with varying levels of performance; (2) 1 L of de-hulling wastewater (chemical oxygen demand concentration of 30 g/L) produced 0.7 L of methane; (3) 1 L of de-hulling wastewater and 20 g of pistachio de-hulling solid waste produced 1.25 L of methane; and (4) 1 g of de-hulling solid waste produced 62.6 mL of methane (or 134 mL of biogas).     

The influence of dilute sulfuric acid pretreatment on biogas production from wheat plant

Dilute sulfuric acid pretreatment was used to improve the biomethane production from wheat plant (WP) via mesophilic anaerobic digestion. The pretreatments were performed at 121°C for different time durations of 10, 30, 60, and 120 min. The maximum methane yield of 302.4 mL/g volatile solids (VS) was obtained after the pretreatment for 120 min, which was 15.5% higher than that of the untreated WP. The highest amounts of lignin removal (15.2%) and xylan degradation (91.5%) were also achieved after this pretreatment. The pretreatment for 60 min enhanced the methane yield by 8.9%, while the pretreatments for 10 and 30 min had no positive effects on the methane yield. All of the pretreatments significantly removed the hemicelluloses. Moreover, the qualitative analysis of the untreated and pretreated WP structure showed significant reduction in the crystallinity index accompanied by the destruction of surface layers of WP structure after pretreatment.     

Relationships between dairy slurry total solids, gas emissions, and surface crusts

Livestock slurry storages are sources of methane (CH?), nitrous oxide (NO?), and ammonia (NH?) emissions. Total solids (TS) content is an indicator of substrate availability for CH? and N?O production and NH? emissions and is related to crust formation, which can affect these gas emissions. The effect of TS on these emissions from pilot-scale slurry storages was quantified from 20 May through 16 Nov. 2010 in Nova Scotia, Canada. Emissions from six dairy slurries with TS ranging from 0.3 to 9.5% were continuously measured using flow-through steady-state chambers. Methane emissions modeled using the USEPA methodology were compared with measured data focusing on emissions when empty storages were filled, and retention times were >30 d with undegraded volatile solids (VS) remaining in the system considered available for CH? production (VS carry-over). Surface crusts formed on all the slurries. Only the slurries with TS of 3.2 and 5.8% were covered completely for ～3 mo. Nitrous oxide contributed <5% of total greenhouse gas emissions for all TS levels. Ammonia and CH? emissions increased linearly with TS despite variable crusting, suggesting substrate availability for gas production was more important than crust formation in regulating emissions over long-term storage. Modeled CH? emissions were substantially higher than measured data in the first month, and accounting for this could improve overall model performance. Carried-over VS were a CH? source in months 2 through 6. The results of this study suggest that substrate availability regulates emissions over long-term storage and that modifying the USEPA model to better describe carbon cycling is warranted.     

Methane fermentation of dung from litter-free reared domestic animals — an optimisation study

Data on the quantity (27 453 tons from litter-free reared animals in Bulgaria, only) and the chemical and energy characteristics of dung produced in intensive management farms for domestic animals suggests that technologies combining biogenic elements recycling with energy utilistation and dung decontamination are expedient to be applied on these types of farms. To this effect a fermenter was designed and a mathematical model (a Chen-Hashimoto model based computer programme) was applied, as a result of which the optimum methane fermentation parameters were determined. The technological methane output (Y_v) — indicator of biogas production efficiency (output/dm³ fermentor volume) showed an optimum at temperature 55°C and period of exchange 6 days. The methane output per unit mineralised organic matter in the substrate (B) — assumed as an indicator of ecological efficiency (maximum organic matter degradation) exhibited an optimum at 33°C for 15 days period of exchange.     

玉米植株各器官中重金属含量相关性的研究

为探讨大宗粮食作物玉米植株各器官中重金属含量的相关性,选择6个玉米品种进行盆栽实验。盆栽试验的土壤来自西南某省铅锌矿区。研究结果表明,(1)6个供试品种植株籽粒中,Ni、Pb、Zn的含量全部超标;部分品种玉米中的Cd含量超标;6个供试品种植株玉米中的Cr、Cu含量全部达标。(2)重金属含量在玉米各器官中存在交互效应;如,供试植株叶片中Cu与Ni、Pb与Zn分别存在显著正相关;在供试植株的叶片和茎秆中,Cd、Pb、Zn三者的含量呈显著性正相关。(3)金属Ni在供试植物茎秆与籽粒中存在交换的情况;金属Pb的含量在供试植株根部与茎秆的差异较大,其可能原因是植株茎秆对铅的吸收达到了饱和上限;金属Zn的含量在植株籽粒与茎秆中的差异较大,主要是因为Zn在玉米植株内的移动性强,且Zn最容易在籽粒中积累。     

改性玉米秸秆吸附去除废水中四环素的研究

应用平衡吸附法，研究了不同投加量（改性玉米秸秆）、温度及pH条件下，改性玉米秸秆对水体中四环素的吸附作用，并利用等温曲线及吸附动力学方程对试验结果进行了拟合。结果表明：在吸附剂用量0．4g，温度30℃，振荡时间30min，pH值7的条件下，对水体中四环素浓度为50．136mg／L的吸附率可达93．4％。四环素废水吸附均符合Langmuir及Freundlich等温模式。但Langmuir方程拟合得较好，Elovich方程能更好地拟舍改性玉米秸秆对水体中四环素的吸附动力学曲线。     

中温厌氧消化垃圾焚烧发电厂渗滤液的试验研究

采用逐渐提高有机负荷的半连续进料方式,研究中温(35℃左右)条件下,猪粪为接种物,厌氧消化焚烧发电厂垃圾渗滤液的消化规律。试验以5%为单位,由5%体积负荷渗滤液起开始填料,逐步提高至35%的体积负荷。试验进行的7个负荷,消化系统pH值稳定在7.2~7.8之间,碱度、氨氮浓度较高,分别在7803~17948 mg/L、673~1630 mg/L之间,为系统提供了良好的酸碱缓冲环境。低负荷时,VFA值较低,生物气中甲烷含量稳定在60%左右;高负荷时,随着渗滤液的加入,VFA值波动较大,甲烷含量也随VFA值的变化起伏波动(25%负荷时,甲烷含量出现峰值,高达75.5%)。消化系统共进料2800 mL渗滤液(即197.3 gCODCr),累计产气量83086 mL,平均每gCODCr产沼气约421.1 mL(平均gCODcr产甲烷约273.7 mL)。进水渗滤液CODCr浓度为70472 mg/L,实验结束时,消化液CODCr浓度降至3373 mg/L,CODCr去除率高达95.2%。     

Highly efficient conversion of sugarcane bagasse pretreated with liquid hot water into ethanol at high solid loading

Liquid hot water (LHW), an environmental-friendly physico-chemical treatment, was applied to pretreat the sugarcane bagasse (SCB). Tween80, a non-ionic surfactant, was used to enhance the enzymatic hydrolysis of the pretreated SCB. It found that 0.125 mL Tween80 /g dry matter could make the maximum increase (33.2%) of the glycan conversion of the LHW-pretreated SCB. A self-designed laboratory facility with a plate-and-frame impeller was applied to conduct batch hydrolysis, fed-batch hydrolysis, and the process of high-temperature (50°C) fed-batch hydrolysis following low-temperature (30°C) simultaneous saccharification and fermentation (SSF) which was adopted to overcome the incompatible optimum temperature of saccharification and fermentation in the SSF process. After hydrolyzing LHW-pretreated SCB for 120 h with commercial cellulase, the total sugar concentration and glycan conversion obtained from fed-batch hydrolysis were 91.6 g/L and 68.3%, respectively, which were 9.7 g/L and 7.3% higher than those obtained from batch hydrolysis. With Saccharomyces cerevisiae Y2034 fermenting under the non-sterile condition, the ethanol production and theoretical yield obtained from the process of SSF after fed-batch hydrolysis were 55.4 g/L and 88.3% for 72h, respectively, which were 15.5 g/L and 24.7% higher than those from separate fed-batch hydrolysis and fermentation. The result of this work was superior to the reported results obtained from the LHW-pretreated SCB.     

Biomethanation of plant materials and agricultural residues using dung samples as wild population of microbes and also with isolated methanogens

Recycling of plant materials and agricultural residues for biomethanation was attempted in vials. The methanogenic activities of certain sewage samples have also been tested. Both sterilized and non-sterilized biomasses were used. Biomethanation was carried out with dung samples (cow, goat, buffalo, piggery wastes and poultry wash) as wild populations of microbes and in combination with other microbial isolates (isolated in the laboratory).Biomethanation had been observed to be good in most cases and particularly with the sterilized biomass. Mixed inoculum (dung samples and poultry wash) was found to be best for biomethanation. Of the microbe isolates, isolates from buffalo, pig and paper mill wastes appear to be most effective. Pretreated sawdust and rice straw were found to be good subtrates for biomethanation. Of the different plant biomass used Spirogyra (algae), Ipomea and water hyacinth were most effective whereas Jatropa gossypifolia and Parthenium sp. were the least effective. Biomethanation of Spirogyra was carried out both in anoxic and oxic conditions. Though methane production decreased enormously under oxic conditions, definite methane production continued indicating that the biomethanation process is not exclusively anoxic. Similarly, biomethanation of sewage samples from different sewage treatment plants were carried out with and without isolated methanogens and methane production was found to be moderate.     

Effect of Fenton pretreatment on anaerobic digestion of olive mill wastewater and olive mill solid waste in mesophilic conditions

The olive mill waste (OMW) generated from olive oil extraction process constitutes a major environmental concern owing to its high organic and mineral matters and acidic pH. Anaerobic digestion (AD) is a main treatment for reducing the organic matter and toxic substances contained in OMW and generating at the same time, energy in the form of biogas. AD of OMW that contains lignocellulose is limited by the rate of hydrolysis due to their recalcitrant structure. This study is devoted to the effect of Fenton process (FP) pretreatment on olive mill wastewater (OMSW) /olive mill solid waste (OMWW) co-digestion to improve their digestibility and in this way the biogas production. The FP pretreatment was performed in batch mode at 25°C, various H₂O₂/[Fe²⁺] ratios (100–1200), catalyst concentration ([Fe²⁺]) ranging from 0.25 to 2 mM, reaction time varying from 30 to150 min, and different pH (3–11). The best performance was obtained with H₂O₂/[Fe²⁺] = 1000, [Fe²⁺] = 1.5 mM, 120 min, and pH 3. Biochemical methane potential (BMP) tests conducted in batch wise digester and at mesophilic conditions (37 °C) showed that cumulative biogas and methane production were higher without FP treatment, and correspond to 699 and 416 mL/g VS, respectively. However, pre-treated OMSW results into an increase of 24% of methane yield. After 30 days of AD, the methane yield was 63%, 54%, and 48%, respectively, for OMSW treated without iron precipitation, with iron precipitation and untreated OMSW sample.     

EPIC tile flow and nitrate loss predictions for three Minnesota cropping systems

Subsurface tile drains are a key source of nitrate N (NO3-N) losses to streams in parts of the north central USA. In this study, the Erosion Productivity Impact Calculator (EPIC) model was evaluated by comparing measured vs. predicted tile flow, tile NO3-N loss, soil profile residual NO3-N, crop N uptake, and yield, using 4 yr of data collected at a site near Lamberton, MN, for three crop rotations: continuous corn (Zea mays L.) or CC, corn-soybean [Glycine max (L.) Merr.] or CS, and continuous alfalfa (Medicago sativa L.) or CA. Initially, EPIC was run using standard Soil Conservation Service (SCS) runoff curve numbers (CN2) for CC and CS; monthly variations were accurately tracked for tile flow (r2 = 0.86 and 0.90) and NO3-N loss (r2 = 0.69 and 0.52). However, average annual CC and CS tile flows were underpredicted by -32 and -34%, and corresponding annual NO3-N losses were underpredicted by -11 and -52%. Predicted average annual tile flows and NO3-N losses generally improved following calibration of the CN2; tile flow underpredictions were -9 and - 12%, whereas NO3-N losses were 0.6 and -54%. Adjusting a N parameter further improved predicted CS NO3-N losses. Predicted monthly tile flows and NO3-N losses for the CA simulation compared poorly with observed values (r2 values of 0.27 and 0.19); the annual drainage volumes and N losses were of similar magnitude to those measured. Overall, EPIC replicated the relative impacts of the three cropping systems on N fate.     

Processing of Straw/Corn Stover: Comparison of Life Cycle Emissions

The LCA emissions from four renewable energy routes that convert straw/corn stover into usable energy are examined. The conversion options studied are ethanol by fermentation, syndiesel by oxygen gasification followed by Fischer Tropsch synthesis, and electricity by either direct combustion or biomass integrated gasification and combined cycle (BIGCC). The greenhouse gas (GHG) emissions of these four options are evaluated, drawing on a range of studies, and compared to the conventional technology they would replace in a western North American setting. The net avoided GHG emissions for the four energy conversion processes calculated relative to a “business as usual” case are 830 g CO₂e/kWh for direct combustion, 839 g CO₂e/kWh for BIGCC, 2,060 g CO₂e/L for ethanol production, and 2,440 g CO₂e/L for FT synthesis of syndiesel. The largest impact on avoided emissions arises from substitution of biomass for fossil fuel. Relative to this, the impact of emissions from processing of fossil fuel, e.g., refining of oil to produce gasoline or diesel, and processing of biomass to produce electricity or transportation fuels, is minor.     

Scaled-up bioconversion of fish waste to liquid fertilizer using a 5 L ribbon-type reactor

A scaled-up conversion process of fish waste to liquid fertilizer was performed in a 5 L ribbon-type reactor. Biodegradation was performed by inoculation of autoclaved fish waste with 5.84 × 10(5) CFU mL(-1) of mixed microorganisms for 96 h. As a result, the pH changed from 6.92 to 5.72, the cell number reached 7.28 × 10(5) CFU mL(-1), and approximately 430 g (28.3%) of fish waste was degraded. Analyses indicated that the 96 h culture of inoculated fish waste possessed comparable fertilizing ability to commercial fertilizers in hydroponic culture with amino acid contents of 6.91 g 100 g(-1). Therefore, the scaled-up production achieved a more satisfactory fish waste degradation rate (3.61 g h(-1)) than the flask-scale production (0.24 g h(-1)). The biodegraded broth of fish waste at room temperature did not undergo putrefaction for 6 months due to the addition of 1% lactate.     

Nitrogen fertilizer replacement value of cattle slurry in grassland as affected by method and timing of application

Slurry application with methods such as trailing shoe (TS) results in reduced emissions of ammonia (NH3) compared with broadcast application using splashplate (SP). Timing the application during cool and wet weather conditions also contributes to low NH3 emissions. From this perspective, we investigated whether reduced NH3 emissions due to improved slurry application method and timing results in an increase in the nitrogen (N) fertilizer replacement value (NFRV). The effects of application timing (June vs. April) and application method (TS vs. SP) on the apparent N recovery (ANR) and NFRV from cattle slurry applied to grassland were examined on three sites over 3 yr in randomized block experiments. The NFRV was calculated using two methods: (i) NFRV(N) based on the ANR of slurry N relative to mineral N fertilizer; and (ii) NFRV(DM) based on DM yield. The TS method increased the ANR, NFRV(N), and NFRV(DM) compared with SP in the 40- to 50-d period following slurry application by 0.09, 0.10, and 0.10 kg kg(-1), respectively. These values were reduced to 0.07, 0.06, and 0.05 kg kg(-1), respectively, when residual harvests during the rest of the year were included. The highest NFRV(DM) for the first harvest period was with application in April using STS (0.30 kg kg(-1)), while application in June with SP had the Slowest (0.12 kg kg(-1)). The highest NFRV(DM) for the cumulative harvest period was with application in April using TS (0.38 kg kg(-1)), while application in June with SP had the lowest (0.17 kg kg(-1)). Improved management of application method, by using TS instead of SP, and timing, by applying slurry in April rather than June, offer potential to increase the NFRV(DM) of cattle slurry applied to grassland.     

Nitrate, phosphate, and ammonium loads at subsurface drains: agroecosystems and nitrogen management

Artificial subsurface drainage in cropland creates pathways for nutrient movement into surface water; quantification of the relative impacts of common and theoretically improved management systems on these nutrient losses remains incomplete. This study was conducted to assess diverse management effects on long-term patterns (1998-2006) of NO, NH, and PO loads (). We monitored water flow and nutrient concentrations at subsurface drains in lysimeter plots planted to continuous corn ( L.) (CC), both phases of corn-soybean [ (L.) Merr.] rotations (corn, CS; soybean, SC), and restored prairie grass (PG). Corn plots were fertilized with preplant or sidedress urea-NHNO (UAN) or liquid swine manure injected in the fall (FM) or spring (SM). Restored PG reduced NO eightfold compared with fields receiving UAN (2.5 vs. 19.9 kg N ha yr; < 0.001), yet varying UAN application rates and timings did not affect NO across all CCUANs and CSUANs. The NO from CCFM (33.3 kg N ha yr) were substantially higher than for all other cropped fields including CCSM (average 19.8 kg N ha yr, < 0.001). With respect to NH and PO, only manured soils recorded high but episodic losses in certain years. Compared with the average of all other treatments, CCSM increased NH in the spring of 1999 (217 vs. 680 g N ha yr), while CCFM raised PO in the winter of 2005 (23 vs. 441 g P ha yr). Our results demonstrate that fall manuring increased nutrient losses in subsurface-drained cropland, and hence this practice should be redesigned for improvement or discouraged.     

Estimation of effect of sugarcane bagasse biochar amendment in landfill soil cover on geotechnical properties and landfill gas emission

In a sanitary landfill, the final cover plays an important role in reducing the landfill gas emission to the atmosphere and in preventing the ingress of rainwater into the dumped waste. The present study investigated the suitability of sugarcane bagasse biochar as an amendment to the cover soil to improve the required landfill liner properties. The amended cover soil sugarcane bagasse (SSB) was tested for its stability and effectiveness, in terms of both geotechnical properties and methane mitigation efficiency. The effects of amending 15%, 20%, and 25% of sugarcane bagasse biochar (passing through 300 micron Indian Standard sieve) on the geotechnical properties of the SSB indicated that the SSB with 25% biochar showed the required values as per the standard with maximum dry density of 1.57 grams per cubic centimeter (g/cm³), liquid limit, plasticity index, and percentage of fines 48.5%, 16.3%, and 74.7%, respectively, and permeability of 0.9 × 10^?7. A column study that was conducted to determine the methane emission from the cover soil showed a 65.8% reduction in the methane emission compared to that of a column without SSB cover, with a cumulative methane emission of 410 milliliters (mL) at the end of 200 hours (h). On the other hand, the volume of methane emitted after 310 h from the column without cover and with the SSB cover was 1850 mL and 692 mL, respectively. The difference between these two values is found to be 22% of the total methane that the cover would have handled in its lifetime (5267 mL). Thus, there is an increase in the percentage of methane adsorption by soil cover from 15% to 22% when the soil was amended with 25% sugarcane bagasse biochar.     

Bio-Hydrogen Synthesis from Wastewater by Anaerobic Fermentation Using Microflora

Biological hydrogen production was investigated using biomass in palm oil mill effluent (POME) and artificial wastewater containing 10g glucose under anaerobic fermentation in a batch process. Activated POME sludge and different types of composts were collected as sources of inocula for the study. The anaerobic microflora was found to yield significant amounts of hydrogen. The experimental results show that the gas composition contained hydrogen (66–68%) and carbon dioxide (32–34%). Through out the study, methane gas was not observed in the evolved gas. The hydrogen production was accompanied with the formation of acetate and butyrate. Furthermore, the cumulative hydrogen data were fitted to a simple model developed from Gompertz Equation, where the lag phase time, hydrogen production potential and hydrogen production rate at various conditions were quantitatively estimated.     

Methane emissions of beef cattle on forages: efficiency of grazing management systems

Fermentation in the rumen of cattle produces methane (CH4). Methane may play a role in global warming scenarios. The linking of grazing management strategies to more efficient beef production while reducing the CH4 emitted by beef cattle is important. The sulfur hexafluoride (SF6) tracer technique was used to determine the effects of best management practices (BMP) grazing compared with continuous grazing on CH4 production in several Louisiana forages during 1996-1998. Cows and heifers (Bos taurus) grazed common bermudagrass [Cynodon dactylon (L.) Pers.], bahiagrass (Paspalum notatum Flugge), and ryegrass (Lolium multiflorum Lam.) pastures and were wintered on bahiagrass hay with supplements of protein molasses blocks (PMB), cottonseed meal and corn (CSMC), urea and corn (URC), or limited ryegrass grazing (LRG). Daily CH4 emissions were between 89 and 180 g d(-1) for young growing heifers and 165 to 294 g d(-1) for mature Simbrah cows. Heifers on "ad lib" ryegrass in March and April produced only one-tenth the CH4 per kg of gain as heifers on LRG of 1 h. Using BMP significantly reduced the emission of CH4 per unit of animal weight gain. Management-intensive grazing (MIG) is a BMP that offers the potential for more efficient utilization of grazed forage crops via controlled rotational grazing and more efficient conversion of forage into meat and milk. Projected CH4 annual emissions in cows reflect a 22% reduction from BMP when compared with continuous grazing in this study. With the BMP application of MIG, less methane was produced per kilogram of beef gain.     

Using electromagnetic induction technology to predict volatile fatty acid, source area differences

Subsurface measures have been adapted to identify manure accumulation on feedlot surfaces. Understanding where manure accumulates can be useful to develop management practices that mitigate air emissions from manure, such as odor or greenhouse gases. Objectives were to determine if electromagnetic induction could be used to predict differences in volatile fatty acids (VFA) and other volatiles produced in vitro from feedlot surface material following a simulated rain event. Twenty soil samples per pen were collected from eight pens with cattle fed two different diets using a predictive sampling approach. These samples were incubated at room temperature for 3 d to determine fermentation products formed. Fermentation products were categorized into acetate, straight-, branched-chained, and total VFAs. These data were used to develop calibration prediction models on the basis of properties measured by electromagnetic induction (EMI). Diet had no significant effect on mean volatile solids (VS) concentration of accumulated manure. However, manure from cattle fed a corn (Zea mays L.)-based diet had significantly ( P ≤ 0.1) greater mean straight-chained and total VFA generation than pens where wet distillers grain with solubles (WDGS) were fed. Alternately, pens with cattle fed a WDGS-based diet had significantly (P ≤ 0.05) greater branched-chained VFAs than pens with cattle fed a corn-based diet. Many branched-chain VFAs have a lower odor threshold than straight-chained VFAs; therefore, emissions from WDGS-based diet manure would probably have a lower odor threshold. We concluded that diets can affect the types and quantities of VFAs produced following a rain event. Understanding odorant accumulation patterns and the ability to predict generation can be used to develop precision management practices to mitigate odor emissions.     

Greenhouse gas fluxes from an irrigated sweet corn (Zea mays L.)-potato (Solanum tuberosum L.) rotation

Intensive agriculture and increased N fertilizer use have contributed to elevated emissions of the greenhouse gases carbon dioxide (CO(2)), methane (CH(4)), and nitrous oxide (N(2)O). In this study, the exchange of CO(2), N(2)O, and CH(4) between a Quincy fine sand (mixed, mesic Xeric Torripsamments) soil and atmosphere was measured in a sweet corn (Zea mays L.)-sweet corn-potato (Solanum tuberosum L.) rotation during the 2005 and 2006 growing seasons under irrigation in eastern Washington. Gas samples were collected using static chambers installed in the second-year sweet corn and potato plots under conventional tillage or reduced tillage. Total emissions of CO(2)-C from sweet corn integrated over the season were 2071 and 1684 kg CO(2)-C ha(-1) for the 2005 and 2006 growing seasons, respectively. For the same period, CO(2) emissions from potato plots were 1571 and 1256 kg of CO(2)-C ha(-1). Cumulative CO(2) fluxes from sweet corn and potato fields were 17 and 13 times higher, respectively, than adjacent non-irrigated, native shrub steppe vegetation (NV). Nitrous oxide losses accounted for 0.5% (0.55 kg N ha(-1)) of the applied fertilizer (112 kg N ha(-1)) in corn and 0.3% (0.59 kg N ha(-1)) of the 224 kg N ha(-1) applied fertilizer. Sweet corn and potato plots, on average, absorbed 1.7 g CH(4)-C ha(-1) d(-1) and 2.3 g CH(4)-C ha(-1) d(-1), respectively. The global warming potential contributions from NV, corn, and potato fields were 459, 7843, and 6028 kg CO(2)-equivalents ha(-1), respectively, for the 2005 growing season and were 14% lower in 2006.