The effects of sinusoidal leading edge of turbine blades on the power coefficient of horizontal-axis wind turbine (HAWT)

In order to improve the aerodynamic performance of horizontal-axis wind turbine (HAWT), a sinusoidal shape is applied to turbine blade. In this study, four types of modified blades were chosen based on variations in amplitude and wavelength of protuberance along the leading edge. Compared with the baseline model, the power coefficients (C_p) of HAWT with modified blades were improved, especially at low tip speed ratios. At low wind speed (V = 6 m/s), blades with short wavelength obtain significant improvement in C_p compared with the baseline model. As wind speed increases, this improvement decreases. In addition, turbine blade with large amplitude and long wavelength obtains better C_p values at higher wind speeds than lower ones, which have a great potential to be more superior at relatively higher wind speeds.     

A numerical investigation of fluid-structure coupling of 3 MW wind turbine blades

In this paper, computational modeling is created for 3 MW wind turbine blade using the software Solidworks, and the computations are carried out using Workbench for the fluid–structure interaction of blades due to both the rated and the extreme wind load. The methods developed are applied to the simulation of the NREL Phase VI wind turbine blades, and validation against published data is presented. Moreover, the static structural analysis for wind turbine rotor is performed using Mechanical APDL. The results show that the maximum values of stress reach 458 MPa and 76.9 MPa due to the rated and extreme wind load, respectively, which are lower than 78.3 MPa, the flexural strength of Swancor 2511-A epoxy resin for blade material.     

Blade thickness effect on the aerodynamic performance of an asymmetric NACA six series blade vertical axis wind turbine in low wind speed

ABSTRACT

Vertical axis wind turbine (VAWT) is an economic and widely used energy converter for converting wind energy into useful form of energy, like mechanical and electrical energy. For efficient energy conversion in low wind speed and to have improved power coefficient of asymmetric blade VAWT, selection of optimum blade thickness is needed thus entailing its detailed investigation with respect to different operating wind speed conditions. Present study methodically explores the impact of thickness to chord (t/c) ratio on aerodynamic performance of a three bladed asymmetrical blade H-Darrieus VAWT at different low wind speed conditions by using 2D unsteady CFD simulations. The optimal t/c is obtained on the basis of maximum power coefficient and average moment coefficient of the turbine. The aerodynamic performance curves are obtained at different operating and t/c conditions and the performance insights are corroborated with the findings from the flow physics study to come to some concrete conclusions on the effects of the thickness to chord ratio. The present study identifies large blade curvature to create a large diverging passage on the blade suction surface as the prominent reason for aerodynamic performance drop at a high t/c ratio.     

New national parks for Scotland: coalitions in conflict over the allocation of planning powers in the Cairngorms

The introduction of national parks in areas where existing authorities have traditionally been responsible for developing policies, preparing plans and making decisions on development proposals, can be a threat to longstanding interests. This paper explores this problem by examining the struggle for control of planning in one of Scotland's first national parks, the Cairngorms. Recent research (McCarthy et al., 2002 McCarthy J Lloyd G Illsley B (2002) National parks in Scotland: balancing environment and economy Research briefing European Planning Studies 10 (5) pp. 665–670 [Web of Science ®] [Google Scholar]) has established the policy context for this investigation. Informed by research focusing on the consultation process which led to the establishment of the national park, this paper analyzes how alternative approaches to the allocation of planning powers were captured in competing storylines, around which polarized coalitions of interest formed. Opening such insights into the considerations that shape institutional design—a combination of contested problem framing and straightforward political struggles over the locus of regulatory power—starkly reveals the challenges to the new park authority as it seeks to establish consensus between conflicting interests.     

Where the Waters Divide: First Nations,Tainted Water and Environmental Justice in Canada

Abstract

We have survived Canada's assault on our identity and our rights … Our survival is a testament to our determination and will to survive as a people. We are prepared to participate in Canada's future—but only on the terms that we believe to be our rightful heritage.

Wallace Labillois, Council of Elders, Kingsclear, New Brunswick

This paper argues for a strengthening of the theoretical relationship between neo-liberalism and environmental justice. Empirical research involving First Nations communities in southwestern Ontario suggests that neo-liberal reforms introduced in the mid-1990s were particularly discriminatory against Canada's indigenous peoples, serving to exacerbate historical disparities in health, environment pollution, and well-being. In particular, under neo-liberal reform in Ontario, recognition of environmental injustices has become much more difficult for First Nations communities. Furthermore, this ‘new’ form of environmental governance has broadly reduced legitimate opportunities for First Nations to participate in environmental governance that affects their health and welfare. In short, this research supports a widening of the definition of environmental justice advocated by David Schlosberg and others (Environmental Politics, 13(3) (2004), pp. 517–540; Agyeman, Bullard and Evans 2003 Agyeman, J., Bullard, R. D. and Evans, B. 2003a. “Joined-up thinking: bringing together sustainability, environmental justice and equity”. In Just Sustainabilities: Development in an Unequal World, Edited by: Agyeman, J., Bullard, R. D. and Evans, B. Cambridge, MA: MIT Press.  [Google Scholar]; Akwesasne Task Force on the Environment, Research Advisory committee 1997; Di Chiro 1998 Di Chiro, Giovanna. 1998. “Environmental Justice from the Grassroots: Reflections on History, Gender and Expertise”. In The Struggle for Ecological Democracy: Environmental Justice Movements in the United States, Edited by: Faber, D. NY: Guilford.  [Google Scholar]) if we are to understand the subtle, complex and multiple ways that this new form of environmental governance is particularly harmful to marginalized groups, such as First Nations in Canada.     

Planning for global environmental change in Bangkok's informal settlements

Government agencies in cities across Asia recognise that municipalities must take steps to adapt to projected climate changes if people and places are to be kept above water. This paper focuses on planning for climate change in Bangkok because it ranks among the top 10 port cities vulnerable to climate change related flooding. It is also understood that the most devastating impacts of climate change will be suffered by the city's most vulnerable residents: the poor. Not only do impoverished people occupy physically vulnerable space, such as riverbanks, but they are also the least equipped to recover from the disruption of their livelihoods.

Several scholars have identified “institutional traps” that prevent the Thai government from successfully aiding poor and marginalised flood victims in the past. These include poor coordination, lack of monitoring and evaluation, rigidity, crisis management and elite capture. Lebel, Manuta, and Garden (2011, 56) Lebel, L., J.B. Manuta, and P. Garden. 2011. “Institutional Traps and Vulnerability to Changes in Climate and Flood Regimes in Thailand.” Regional Environmental Change 11 (1): 45–58.[Crossref], [Web of Science ®] , [Google Scholar] pose the crucial question: “How have individuals – from local community leaders through to national level politicians and bureaucrats – successfully influenced policy and programmes to avoid institutional traps and improve adaptive capacities to climate change?”

In this paper, we begin to address this question through examining emergent methods of “community based adaptation” and reviewing case studies of adaptation action from other vulnerable communities in the Global South. These lessons – such as overcoming institutional rigidity and avoiding elite capture – are important for Bangkok and other cities in the Global South that face many different challenges by global environmental change.     

A novel blade design for Savonius wind turbine based on polynomial bezier curves for aerodynamic performance enhancement

ABSTRACT

Advanced wind turbine designs and technologies have been evolved to take advantage of wind energy. Despite the significant progress already attained, the need for a dependable wind energy converter particularly devoted to small-scale applications remains a challenging issue. Due to its design simplicity, Savonius wind turbine is the most suitable candidate for such applications. It operates at low wind speed, with the necessary starting capacity and insensitivity to wind directions. Moreover, in the literature related to wind energy, the Savonius rotor is known for its low performance compared to other types of wind turbines. In this paper, we present a study into the utilization of Bézier curves and transient computational fluid dynamics (CFD) to optimize the conventional Savonius blade design. The k-ω SST turbulence model is employed to perform a series of CFD simulations in order to assess the power coefficient of each generated design. A validation of optimization results using the Taguchi method was carried out. The comparative analysis of the torque and power coefficients shows a significant increase in the power coefficient (C_p). The optimal C_p is 0.35 and is 29% higher than the conventional Savoniu wind turbine (SWT). Subsequently, the effectiveness of the innovative geometry is proved by improved pressure and velocity distributions around blades of novel design.     

Numerical modeling and optimization of a power augmented S-type vertical axis wind turbine

An axial symmetry augmented vertical axis wind turbine, which is suitable for arbitrary wind directions, is proposed in this paper. In order to improve the power generation ability of the S-type vertical axis wind turbine, a set of so-called “collection-shield boards” are installed symmetrically around the rotating S-type rotor. The flow fields around this type of wind turbine are numerically simulated with the aid of CFD method. The optimized design of geometrical parameters of the rotor and collection-shield boards is conducted by using the orthogonal design method. The obtained results suggest that the power output of the optimized augmented wind turbine can reach nearly three times higher than that of the conventional S-type vertical axis wind turbine.     

Hybrid economy research in remote Indigenous Australia: seeing and supporting the customary in community food economies

Hybrid economy research in remote Indigenous Australia is what Gibson-Graham [2008. Diverse economies: performative practices for “other worlds”. Progress in Human Geography, 32 (5), 613–632] describe as a performative ontological project. This research seeks to address the marginalisation of customary economic activities that contribute to the well-being of Indigenous Australians. It aims to make the customary sector more real, more credible and more viable as an object of policy and activism, challenging the dual dominance of the state and the market as the focus of development (cf. Gibson-Graham 2008 Gibson-Graham, J. K. 2008. Diverse economies: performative practices for “other worlds”. Progress in Human Geography, 32(5), 613–632. doi: 10.1177/0309132508090821[Crossref], [Web of Science ®] , [Google Scholar]). This paper outlines how hybrid economy research has sought to broaden views of the economic landscape in remote Indigenous Australia amid the withdrawal of key policy and programmatic support by the Australian Government. This research draws on Canadian national surveys of Indigenous peoples, harvest studies and programmatic support for customary harvest – hunting, fishing and gathering of bush foods – to identify ways in which the Australian Government might better see and support Indigenous community food economies.     

Radiant Domestic Combustion Stove System: Experimental and Simulated Study of Energy Use and Thermal Comfort

A steady-state space radiant heat model and a stove combustion model are developed to simulate the heat exchanges between various surfaces in the room and the stove and stack surfaces, assuming stiochiometric combustion inside the stove and the exhaust gases flow out through the stack by natural convection. The space heat model calculates the fuel consumption, the stove, stack temperatures, and the mass flow rate of exhaust gases, and provides an opportunity to study the energy efficiency of the stove, while satisfying the constraints of thermal comfort. Fanger (1982) Fanger, P. O. 1982. Thermal Comfort Analysis and Applications in Engineering, 156–198. New York: McGraw Hill.  [Google Scholar] model and a radiation exchange model between various surfaces of the space, the thermal building energy balance, and stove combustion process is applied to determine the mean radiant temperature (MRT) and the extent of thermal comfort as determined by predicted mean vote (PMV).

The overall model is validated by performing experiments in a room placed inside a controlled outdoor environment. The room is heated using a domestic stove common for rural areas of Lebanon and the MRT, the room air temperature, the walls and window temperatures are measured at two stove positions. The measured MRT, the average room temperature, and the wall surface temperatures agreed within ±7% of values predicted by the numerical model.

A parametric study is performed to optimize the stove and occupant locations in the room where adequate comfort level can be maintained at lower fuel consumption levels. The values of MRT and PMV depend strongly on the position of the radiant stove heater and stack with respect to the cold window and the occupant location. It is shown that it is possible to save up to 15% in stove fuel consumption by changing the stove position in the room with respect to the window and to the person, while maintaining the same level of comfort.     

Policy,Institutional and Market Barriers to the Implementation of Clean Development Mechanisms (CDM) in China

China is the second largest emitter of greenhouse gases (GHG) in the world, with potentially about two thirds of total Certified Emission Reductions (CERs) for Asia on the world carbon market (). Since 68% of its primary energy is from coal, China's average energy intensity is 7.5 times higher than the EU and 4.3 times higher than the US (EU, 2003 The European Union on-line. (2003). (http://europa.eu.int/index_ns_en.htm accessed Oct 2003  [Google Scholar]). Therefore, introducing advanced clean technologies and management to China represents opportunities for Annex I countries to obtain low-cost CERs through CDM projects, and access to one of the largest potential energy conservation markets in the world.

CDM can provide a win-win solution for both China and Annex I countries, and the Chinese government considers that the introduction of CDM projects can bring advanced energy technologies and foreign investment to China, thereby helping China's sustainable economy and generating CERs. As energy efficiency is generally low and carbon intensity is high in both China's energy supply and demand sectors, numerous options exist for cost-effective energy conservation and GHG mitigation with CDM.

This paper reviews current Chinese policies and administrative and institutional settings for CDM cooperation, and discusses existing policy, institutional and other barriers in the energy market by drawing on observations and experience from previous initiatives such as Cleaner Production and energy efficiency. Some options to remove these barriers are addressed. In order to make CDM projects feasible, China's government needs to promote awareness, streamline administrative systems, and be more active in building a competitive edge in the world carbon market.     

A stochastic approach for the operation of a wind and pumped storage plant under a deregulated environment

To improve the competiveness in the energy market, it is necessary that the wind power plants provide guaranteed power generation, although, it is not possible to forecast power availability from wind power plant accurately. This paper presents a stochastic model and solution technique for the combined operation of wind and pumped storage power plants to improve the power availability and increasing the profit considering uncertainties of wind power generation. In this model, uncertainties in wind data have been forecasted for grid connected day-ahead market using Weibull distribution model. The imbalances in the forecasted wind data and the market demand have been reduced by operating the pumped storage power plant. In this stochastic mixed integer problem, pumped storage plant can take the supply either from the grid or from the wind power plant for the pumping operation to store the energy in order to utilize this energy during peak hours for increasing the overall revenue. The reliability of the pumped storage is improved by replacing the conventional unit with the adjustable speed type pumped storage unit. In order to prove the optimality of the solution, two case studies were considered. In case study–I, scheduling is provided by operating the conventional pumped storage unit, whereas in case study–II, adjustable speed pumped storage unit has been used. It has been found that the adjustable speed pumped storage unit has further reduced the imbalance between generated power and demand. The complete approach has been formulated and implemented using AMPL software.     

Performance evaluation of a horizontal axis wind turbine in operation

The operation of modern horizontal axis wind turbine (HAWT) includes a number of important factors, such as wind power (P), power coefficient (C_P), axial flow induction factor (a), rotational speed (Ω), tip speed ratio (λ), and thrust force (T). The aerodynamic qualities of these aspects are evaluated and discussed in this study. For this aim, the measured data are obtained from the Sebenoba Wind Energy Power Plant (WEPP) that is located in the Sebenoba region in Hatay, Turkey, and a wind turbine with a capacity of 2 MW is selected for evaluation. According to the results obtained, the maximum turbine power output, maximum power coefficient, maximum axial flow induction factor, maximum thrust force, optimum rotational speed, probability density of optimum rotational speed, and optimum tip speed ratio are found to be 2 MW, 30%, 0.091, 140 kN, 16.11 rpm, 46.76%, and 7, respectively. This study has revealed that wind turbines must work under optimum conditions in order to extract as much energy as possible for approaching the ideal limit.     

Effect of Nutrient Management Planning on Crop Yield, Nitrate Leaching and Sediment Loading in Thomas Brook Watershed

Government priorities on provincial Nutrient Management Planning (NMP) programs include improving the program effectiveness for environmental quality protection, and promoting more widespread adoption. Understanding the effect of NMP on both crop yield and key water-quality parameters in agricultural watersheds requires a comprehensive evaluation that takes into consideration important NMP attributes and location-specific farming conditions. This study applied the Soil and Water Assessment Tool (SWAT) to investigate the effects of crop and rotation sequence, tillage type, and nutrient N application rate on crop yield and the associated groundwater ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching and sediment loss. The SWAT model was applied to the Thomas Brook Watershed, located in the most intensively managed agricultural region of Nova Scotia, Canada. Cropping systems evaluated included seven fertilizer application rates and two tillage systems (i.e., conventional tillage and no-till). The analysis reflected cropping systems commonly managed by farmers in the Annapolis Valley region, including grain corn-based and potato-based cropping systems, and a vegetable-horticulture system. ANOVA models were developed and used to assess the effects of crop management choices on crop yield and two water-quality parameters (i.e., ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching and sediment loading). Results suggest that existing recommended N-fertilizer rate can be reduced by 10–25 %, for grain crop production, to significantly lower ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching (P > 0.05) while optimizing the crop yield. The analysis identified the nutrient N rates in combination with specific crops and rotation systems that can be used to manage ${\text{NO}_{3}}^{ - } {\text{-N }}$ leaching while balancing impacts on crop yields within the watershed.     

The Potential of Using Solar Energy to Process Full-Fat Soybeans (Glycine max) to Reduce Urease Activity

The objective of this study was to investigate the efficacy of panel solar cookers in reducing urease activity in full-fat soybeans (Glycine max). Changes in urease activity of soaked (SM), coarse-milled (CM) and whole dry (WM) full fat soybeans were investigated by roasting for 0, 30, 60, 90, 120, 150 and 180 min in multiple reflector panel solar cookers, in a 3 3 3 factorial experiment. Soaking soybeans for 14 h reduced (p<0.05) ^{1 1}P < 0.05 means that the probability (p) of falsely concluding significant difference between values obtained after statistical analysis was less than 5% (0.05). urease activity by 9%, from 6.58 meqNH₃/g DM to 5.98 meqNH₃/g DM. After 180 min of solar roasting, urease activity levels had declined by 81%, 67% and 23% in soaked, milled and whole dry soybeans respectively. Full fat soybean urease activity can be reduced faster in soaked than in dry soybeans. Findings suggest that there is potential in using multiple reflector panel solar cookers to reduce urease activity in full fat soybeans.     

Breathtaking Clarity,Delicious Ambiguity

Abstract

A new institutional architecture is emerging in Wales to govern sustainable development. The National Assembly for Wales (hereafter referred to as the ‘Welsh Assembly’)1 ¹The National Assembly for Wales is the legal entity and title given to the devolved body in Wales. ‘Welsh Assembly Government’ is the term used by the current administration. has a statutory duty to promote sustainable development in the exercise of all its functions; its response has been to design a set of political and organizational arrangements to manage this policy area, and to prepare a Scheme that sets out how it proposes to discharge this duty. Devolved government in Wales has also been the catalyst for the emergence of collaborative relationships and partnerships between different sectors and interests. The Welsh Assembly and the Welsh Local Government Association have published a Compact jointly committing them to promote sustainable development; national non-governmental organizations such as Oxfam and the World Wide Fund for Nature have set up Welsh agencies; local government sustainable development coordinators have formed a national network; a national Sustainable Development Forum has been created; and the Welsh Assembly has taken the lead in establishing a European network of countries interested in sharing best practice on sustainable development. A new Wales-specific structure and system is materializing and the test now is how far this will be effective in delivering sustainable development policies and solutions at local and national levels. This paper examines the challenges in managing sustainable development, and the potential for success of this new governance system, drawing on recent research undertaken by the author on behalf of the Joseph Rowntree Foundation. The examination is set in the context of different theories of governance, and sustainable development is conceptualized as a ‘wicked issue’—one that cannot be resolved by organizations and agencies acting autonomously, but rather needs concerted focus and action across all sectors.     

The Influence of Tip Leakage Flow on Flowfields in a Highly Loaded Transonic Rotor with Forward Sweep

A three-dimensional numerical simulation on a highly loaded transonic rotor with zero, 0.2 mm, 0.3 mm, and 0.5 mm tip gap, respectively, is performed in this article. The flowfields above 60% span of transonic rotors are affected by leakage flow, but the stall margin of rotor has obviously improved with small tip gap. Typical leakage vortex structures with double cores are generated by the interaction of incoming flow, leakage flow, and second flow in flowfields, and then the two vortex cores merge into a stronger one in front of shock. The shape of passage shock changes seriously by strong leakage vortex after interaction and a large low-velocity region generates behind shock in tip region. The blockage, produced by leakage flow and boundary layer separation, induces detached shock wave near leading edge of rotors and triggers the rotating stall of compressor. However, with tip gap increasing, the blockage produced by leakage flow tends to be dominant in occurrence of rotating stall. Once the tip clearance adds to 0.5 mm, vortex breakdown in tip region of rotor appears and the flow deteriorates drastically, which aggravates the onset of stall in rotor.     

A practical methodology for information fusion in presence of uncertainty: application to the analysis of a nuclear benchmark

This work is devoted to some methodological developments on information fusion in presence of uncertainty and their application in the frame of the BEMUSE Programme. In nuclear safety studies, different uncertainty analyses using different codes and implying different experts are generally performed. It is then useful to define formal methods to combine all these information sources in order to improve the reliability of the expertise process and especially to detect possible conflicts (if any) between the sources. Starting from the IRSN methodology already introduced in Destercke and Chojnacki (Nucl Eng Des 238(9):2484–2493, 2008), this paper presents a more convenient reformulation of its construction to allow its use by engineers. It is then applied to analyse the results coming from the BEMUSE Programme.     

Assisted Migration,Risks and Scientific Uncertainty,and Ethics: A Comment on Albrecht et al.’s Review Paper

In response to Albrecht et al.’s (J Agric Environ Ethics 26(4):827–845, 2013) discussion on the ethics of assisted migration, we emphasize the issues of risk and scientific uncertainty as an inextricable part of a comprehensive ethical evaluation. Insisting on a separation of risk and ethical considerations, although arguably common in many policy contexts, is at best misguided and at worst damaging.     

Short-term wind speed forecasting: Application of linear and non-linear time series models

This study forecasts day-ahead wind speed at 15 minute intervals at the site of a wind turbine located in Maharashtra, India. Wind speed exhibits non-stationarity, seasonality and time-varying volatility clustering. Univariate linear and non-linear time series techniques namely MSARIMA, MSARIMA-GARCH and MSARIMA-EGARCH have been employed for forecasting wind speed using data span ranging from 3 days to 15 days. Study suggests that mean absolute percentage error (MAPE) values first decrease with the increase in data span, reaches its minima and then start increasing. All models provide superior forecasting performances with 5 days data span. It is further evident that ARIMA-GARCH model generates lowest MAPE with 5 days data span. All these models provide superior forecasts with respect to current industry practices. This study establishes that employing various linear and non-linear time series techniques for forecasting day-ahead wind speed can benefit the industry in terms of better operational management of wind turbines and better integration of wind energy into the power system, which have huge financial implications for wind power generators in India.