Phosphorus transformation under the influence of aluminum,organic carbon,and dissolved oxygen at the water-sediment interface: A simulative study

• The three simulation factors caused various changes in both water and sediment. • Responses to simulations differed with the reported natural lakes and wetlands. • Al has dominant effects on sediment P release control among the three factors. • Adding sediment Al can be effective and safe under the simulated conditions. • Polyphosphates were not generated, while added phytate was rather stable. The effects of sediment aluminum (Al), organic carbon (OC), and dissolved oxygen (DO) on phosphorus (P) transformation, at the water-sediment interface of a eutrophic constructed lake, were investigated via a series of simulative experiments. The above three factors had various influences on dissolved P concentration, water pH, water and surface sediment appearance, and P fractions. Additions of Al had the greatest effect on suppressing P release, and the water pH remained alkaline in the water-sediment system under various OC and DO conditions. No dissolution of the added Al was detected. ³¹P-NMR characterization suggested that OC addition did not promote biological P uptake to polyphosphates under oxic conditions. The simulation result on the added phytate indicated the absence of phytate in the original lake sediment. As compared to the reported natural lakes and wetland, the water-sediment system of the constructed lake responded differently to some simulative conditions. Since Al, OC, and DO can be controlled with engineering methods, the results of this study provide insights for the practical site restorations.     

Effects of previous drying of sediment on root functional traits and rhizoperformance of emerged macrophytes

• Sediment desiccation alters morphological characteristics of aquatic sediment. • Alternation in morphological properties of sediment limiting root characteristics. • Fibrous-rooted macrophytes root properties extra favor nutrients removal. • Thick-rooted macrophytes exhibit higher life-span in two sediment types. Purpose of the current study was to investigate the effects of constantly wet and dried-rewetted sediments on root functional traits of emerged macrophytes and their nutrients removal abilities. It is based on the hypothesis that root characteristics and nutrients removal abilities of plants will be altered in the course of sediment desiccation. Four emerged macrophytes including two fibrous-root plants (Canna indica and Acorus calamus) and two thick-root plants (Alocasia cucullata and Aglaonema commutatum) were investigated for their root functional traits and rhizoperformance in both wet and dried-rewetted sediments. Results showed that sediment desiccation followed by rewetting substantially altered the root functional traits (root surface area, radial oxygen loss, and root activity) of plants due to adverse changes in morphological characteristics (porosity, bulk density, particle density) of dried-rewetted sediments than by wet sediments. Consequently, limited plants growth and removal of nitrogen (N), phosphorus (P) and dissolved organic carbon (DOC) were recorded in dried-rewetted sediments and their pore water than in wet sediments. Radial oxygen loss from plant roots correlated positively with root functional traits, plants growth, and removal of N, P and DOC from pore water and sediment in both sediment types. Among the macrophyte species, the fibrous-root plants having advantages root functional traits, greatly influenced the rhizospheric conditions (pH, dissolved oxygen and redox potential), and demonstrated higher N, P and DOC reduction from both sediment types. While, the thick-rooted plants with thick diameter roots (D > 1 mm) and higher rhizome exhibited longer life-span in both sediment types.     

Quorum sensing regulation methods and their effects on biofilm in biological waste treatment systems: A review

• Quorum sensing enhancement and inhibition methods are summarized. • Effects of quorum sensing regulation on biofilm are reviewed. • Current knowledge gaps and research challenges are proposed. Quorum sensing (QS) plays an important role in microbial aggregation control. Recently, the optimization of biological waste treatment systems by QS regulation gained an increasing attention. The effects of QS regulation on treatment performances and biofilm were frequently investigated. To understand the state of art of QS regulation, this review summarizes the methods of QS enhancement and QS inhibition in biological waste treatment systems. Typical QS enhancement methods include adding exogenous QS molecules, adding QS accelerants and cultivating QS bacteria, while typical QS inhibition methods include additions of quorum quenching (QQ) bacteria, QS-degrading enzymes, QS-degrading oxidants, and QS inhibitors. The specific improvements after applying these QS regulation methods in different treatment systems are concluded. In addition, the effects of QS regulation methods on biofilm in biological waste treatment systems are reviewed in terms of biofilm formation, extracellular polymeric substances production, microbial viability, and microbial community. In the end, the knowledge gaps in current researches are analyzed, and the requirements for future study are suggested.     

Temporal variation of PM2.5-associated health effects in Shijiazhuang,Hebei

•Annual mean PM_2.5 in Shijiazhuang were 87, 95, and 82 µg/m³ in 2015–2017. •Health risk of cardiovascular system was higher than respiratory system. •Premature mortality attributed to PM_2.5 was 5088 people in 2017. •ΔMort and YLL reduced by 84.2% and 84.6% when PM_2.5 reduced to 10 µg/m³. •Health risks due to PM_2.5 were severe in Shijiazhuang in 2015–2017. Shijiazhuang is one of the cities in the North China Plain. In recent decades, this city has experienced high levels of fine particulate matter (PM_2.5), which have potentially significant effects on human health. In this study, the health effects of PM_2.5 exposure in Shijiazhuang were estimated by applying an integrated exposure-response model. Premature mortality, years of life lost (YLL), and the mortality benefits linked to reduced levels of PM_2.5 were quantified for the period 2015–2017. In 2015, 2016, and 2017, cerebrovascular diseases caused the highest premature mortality (2432, 2449, and 2483, respectively), followed by ischemic heart diseases (1391, 1479, and 1493, respectively), lung cancer (639,660, and 639, respectively), and chronic obstructive pulmonary diseases (533, 519, and 473, respectively). Notably, the total number of premature deaths caused by PM_2.5 exposure in Shijiazhuang in 2015, 2016, and 2017 were 4994, 5107, and 5088, respectively. Moreover, the YLL in the same years were 47001, 47880 and 47381, respectively. Interestingly, the YLL per 1000 females was lower than that per 1000 males. Finally, we noted that premature mortality and YLL decreased by 84.2% and 84.6% when the PM_2.5 levels diminished to 10 µg/m³. Overall, the results of this study improve our understanding of how high PM_2.5 concentrations affect human health and suggest the application of more stringent measures in Shijiazhuang to alleviate the associated health risks.     

Identification of sources,characteristics and photochemical transformations of dissolved organic matter with EEM-PARAFAC in the Wei River of China

• The source of DOM in surface water and sediment is inconsistent. • The DOC content changes differently in surface water and sediment. • The content of DOC in the surface water is lower than that in the sediment. • The DOM in the surface water had higher photodegradation potentials than sediment. Dissolved organic matter (DOM) in rivers is a critical regulator of the cycling and toxicity of pollutants and the behavior of DOM is a key indicator for the health of the environment. We investigated the sources and characteristics of DOM in surface water and sediment samples of the Wei River, China. Dissolved organic carbon (DOC) concentration and ultraviolet absorbance at 254 nm (UV₂₅₄) increased in the surface water and were decreased in the sediment downstream, indicating that the source of DOM in the water differed from the sediment. Parallel factor (PARAFAC) analysis of the excitation-emission matrices (EEM) revealed the presence of terrestrial humus-like, microbial humus-like and tryptophan-like proteins in the surface water, whereas the sediment contained UVA humic-like, UVC humic-like and fulvic-like in the sediment. The DOM in the surface water and sediment were mainly derived from microbial metabolic activity and the surrounding soil. Surface water DOM displayed greater photodegradation potential than sediment DOM. PARAFAC analysis indicated that the terrestrial humic-like substance in the water and the fulvic-like component in the sediment decomposed more rapidly. These data describe the characteristics of DOM in the Wei River and are crucial to understanding the fluctuations in environmental patterns.     

New method for efficient control of hydrogen sulfide and methane in gravity sewers: Combination of NaOH and nitrite

• The combination of NaOH and nitrite was used to control harmful gas in sewers. • Hydrogen sulfide and methane in airspace were reduced by 96.01% and 91.49%. • Changes in sewage quality and greenhouse effect by chemical dosing were negligible. • The strong destructive effects on biofilm slowed down the recovery of harmful gases. • The cost of the method was only 3.92 × 10⁻³ $/m³. An innovative treatment method by the combination of NaOH and nitrite is proposed for controlling hydrogen sulfide and methane in gravity sewers and overcome the drawbacks of the conventional single chemical treatment. Four reactors simulating gravity sewers were set up to assess the effectiveness of the proposed method. Findings demonstrated hydrogen sulfide and methane reductions of about 96.01% and 91.49%, respectively, by the combined addition of NaOH and nitrite. The consumption of NaNO₂ decreased by 42.90%, and the consumption rate of NaOH also showed a downward trend. Compared with a single application of NaNO₂, the C/N ratio of wastewater was increased to about 0.61 mg COD/mg N. The greenhouse effect of intermediate N₂O and residual methane was about 48.80 gCO₂/m³, which is far lower than that of methane without control (260 gCO₂/m³). Biofilm was destroyed to prevent it from entering the sewage by the chemical additives, which reduced the biomass and inhibited the recovery of biofilm activity to prolong the control time. The sulfide production rate and sulfate reduction rate were reduced by 92.32% and 85.28%, respectively. Compared with conventional control methods, the cost of this new method was only 3.92 × 10⁻³ $/m³, which is potentially a cost-effective strategy for sulfide and methane control in gravity sewers.     

Microbial responses to the use of NaClO in sediment treatment

• Chlorine addition enhanced the release of TOC, TN from the sediment. • Chlorine has a long-term negative effect on microbial richness. • Usually enzymes lose activity, and expression of genes was downregulated. • Carbon degradation and nitrification might be strongly inhibited. Chlorine is often used in algal removal and deodorization of landscape waters, and occasionally used as an emergency treatment of heavily polluted sediments. However, the ecological impact of this practice has not been fully studied and recognized. In this study, NaClO at 0.1 mmol/g based on dry weight sediment was evenly mixed into the polluted sediment, and then the sediment was incubated for 150 days to evaluate its microbial effect. Results showed that NaClO addition enhanced the release of TOC, TN, Cr and Cu from the sediment. The microbial richness in the examined sediment decreased continuously, and the Chao1 index declined from 4241 to 2731, in 150 days. The microbial community composition was also changed. The abundance of Proteobacteria and Bacteroidetes increased to 54.8% and 4.2% within 7 days compared to the control, and linear discriminant analysis (LDA) showed gram-negative bacteria and aerobic bacteria enriched after chlorination. The functional prediction with PICRUSt2 showed the functions of the microbial community underwent major adjustments, and the metabolic-related functions such as carbon metabolism, including pyruvate and methane metabolisms were significantly inhibited; besides, 15 out of 22 analyzed key enzymes involved in C cycling and 6 out of 12 key enzymes or genes involved in N cycling were strongly impacted, and the enzymes and genes involved in carbon degradation and denitrification showed remarkable downregulation. It can be concluded that chlorination posed a seriously adverse effect on microbial community structure and function. This study deepens the understanding of the ecological effects of applying chlorine for environmental remediation.     

Enhanced methane production during long-term UASB operation at high organic loads as enabled by the immobilized Fungi

• Fungi enable the constant UASB operation even at OLR of 25.0 kg/(m³×d). • The COD removal of 85.9% and methane production of 5.6 m³/(m³×d) are achieved. • Fungi inhibit VFAs accumulation and favor EPS generation and sludge granulation. • Fungi enrich methanogenic archaea and promote methanogenic pathways. Anaerobic digestion is widely applied in organic wastewater treatment coupled with bioenergy production, and how to stabilize its work at the high organic loading rate (OLR) remains a challenge. Herein, we proposed a new strategy to address this issue via involving the synergetic role of the Aspergillus sydowii 8L-9-F02 immobilized beads (AEBs). A long-term (210-day) continuous-mode operation indicated that the upflow anaerobic sludge bed (UASB) reactor (R1, with AEBs added) could achieve the OLR as high as 25.0 kg/(m³×d), whereas the control reactor (R0, with AEBs free) could only tolerate the maximum OLR of 13.3 kg/(m³×d). Remarkably, much higher COD removal (85.9% vs 23.9%) and methane production (5.4 m³/(m³×d) vs 2.2 m³/(m³×d)) were achieved in R1 than R0 at the OLR of 25.0 kg/(m³×d). Such favorable effect results from the facts that fungi inhibit VFAs accumulation, favor the pH stabilization, promote the generation of more extracellular polymeric substance, and enhance the sludge granulation and settleability. Moreover, fungi may enhance the secretion of acetyl-coenzyme A, a key compound in converting organic matters to CO₂. In addition, fungi are favorable to enrich methanogenic archaea even at high OLR, improving the activity of acetate kinase and coenzyme F₄₂₀ for more efficient methanogenic pathway. This work may shed new light on how to achieve higher OLR and methane production in anaerobic digestion of wastewater.     

Enhanced cross-flow filtration with flat-sheet ceramic membranes by titanium-based coagulation for membrane fouling control

• Ceramic membrane filtration showed high performance for surface water treatment. • PTC pre-coagulation could enhance ceramic membrane filtration performance. • Ceramic membrane fouling was investigated by four varied mathematical models. • PTC pre-coagulation was high-effective for ceramic membrane fouling control. Application of ceramic membrane (CM) with outstanding characteristics, such as high flux and chemical-resistance, is inevitably restricted by membrane fouling. Coagulation was an economical and effective technology for membrane fouling control. This study investigated the filtration performance of ceramic membrane enhanced by the emerging titanium-based coagulant (polytitanium chloride, PTC). Particular attention was paid to the simulation of ceramic membrane fouling using four widely used mathematical models. Results show that filtration of the PTC-coagulated effluent using flat-sheet ceramic membrane achieved the removal of organic matter up to 78.0%. Permeate flux of ceramic membrane filtration reached 600 L/(m²·h), which was 10-fold higher than that observed with conventional polyaluminum chloride (PAC) case. For PTC, fouling of the ceramic membrane was attributed to the formation of cake layer, whereas for PAC, standard filtration/intermediate filtration (blocking of membrane pores) was also a key fouling mechanism. To sum up, cross-flow filtration with flat-sheet ceramic membranes could be significantly enhanced by titanium-based coagulation to produce both high-quality filtrate and high-permeation flux.     

Occupational risk of exposure to methicillin-resistant Staphylococcus aureus (MRSA) and the quality of infection hygiene in nursing homes

• Staff members were not colonised with MRSA. • But staff were exposed to MRSA from air, sedimented dust and surfaces. • MRSA was found in the rooms of MRSA-colonised residents but not in common areas. • Staff worry about MRSA and spreading it to other residents, family, and acquaintances. • The use of protective eyewear and facemasks could be improved. Methicillin-resistant Staphylococcus aureus (MRSA) is an increasing health concern across the globe and is often prevalent at long-term care facilities, such as nursing homes. However, we know little of whether nursing home staff is exposed to MRSA via air and surfaces. We investigated whether staff members at nursing homes are colonised with and exposed to culturable MRSA, and assessed staff members’ self-reported knowledge of MRSA and compliance with infection hygiene guidelines. Five nursing homes with MRSA positive residents were visited in Copenhagen, Denmark. Personal bioaerosol exposure samples and environmental samples from surfaces, sedimented dust and bioaerosols were examined for MRSA and methicillin-susceptible S. aureus (MSSA) to determine occupational exposure. Swabs were taken from staffs’ nose, throat, and hands to determine whether they were colonised with MRSA. An online questionnaire about MRSA and infection control was distributed. No staff members were colonised with MRSA, but MRSA was detected in the rooms of the colonised residents in two out of the five nursing homes. MRSA was observed in air (n = 4 out of 42, ranging from 2.9–7.9 CFU/m³), sedimented dust (n = 1 out of 58, 1.1 × 10³ CFU/m²/d), and on surfaces (n = 9 out of 113, 0.04–70.8 CFU/m²). The questionnaire revealed that half of the staff members worry about spreading MRSA to others. Identified aspects for improvement were improved availability and use of protective equipment, not transferring cleaning supplies (e.g., vacuum cleaners) between residents’ rooms and to reduce worry of MRSA, e.g., through education.     

Organophosphate esters in sediment from Taihu Lake,China: Bridging the gap between riverine sources and lake sinks

• Eleven OPEs were detected in river sediment and lake sediment in Taihu Lake. • TnBP dominated in river sediment, while TBEP dominated in lake sediment. • A strong correlation existed between logK_oc and logK_ow of OPEs. • Vertical profiles of OPEs in sediment cores varied according to sampling location. Surface sediment samples from Taihu Lake in China and its inflow rivers, along with two lake sediment core samples, were collected and analyzed for organophosphate esters (OPEs). The concentrations of total OPEs varied from 28.60 ng/g to 158.72 ng/g (median: 54.25 ng/g) in river surface sediment and from 62.57 ng/g to 326.84 ng/g (median: 86.37 ng/g) in lake sediment. Tributyl phosphate (TnBP) was the predominant compound in river surface sediment, and tris(2-butoxyethyl) phosphate was predominant in lake sediment. High contamination occurred in the north-west region, which was related to the high level of urbanization and high usage of OPEs. The sediment–water partition coefficients of OPEs (logK_oc) were calculated, showing a significant correlation with logK_ow (p<0.05). The concentration and composition of OPEs in two sediment cores varied due to the different sampling locations, with more OPE species found in the northern region than in the southern one. Principal component analysis and positive matrix factorization indicated that sewage discharges, vehicle emissions, and atmospheric deposition were the possible sources of OPEs in Taihu Lake sediments. Tris(1-chloro-2-propyl) phosphate, tris(2-chloroethyl) phosphate, and TnBP were the main OPEs causing ecological risks.     

Partial anammox achieved in full scale biofilm process for typical domestic wastewater treatment

• A full scale biofilm process was developed for typical domestic wastewater treatment. • The HRT was 8 h and secondary sedimentation tank was omitted. • Candidatus Brocadia were enriched in the HBR with an abundance of 2.89%. • Anammox enabled a stable ammonium removal of ~15% in the anoxic zone. The slow initiation of anammox for treating typical domestic wastewater and the relatively high footprint of wastewater treatment infrastructures are major concerns for practical wastewater treatment systems. Herein, a 300 m³/d hybrid biofilm reactor (HBR) process was developed and operated with a short hydraulic retention time (HRT) of 8 h. The analysis of the bacterial community demonstrated that anammox were enriched in the anoxic zone of the HBR process. The percentage abundance of Candidatus Brocadia in the total bacterial community of the anoxic zone increased from 0 at Day 1 to 0.33% at Day 130 and then to 2.89% at Day 213. Based upon the activity of anammox bacteria, the removal of ammonia nitrogen (NH₄⁺-N) in the anoxic zone was approximately 15%. This showed that the nitrogen transformation pathway was enhanced in the HBR system through partial anammox process in the anoxic zone. The final effluent contained 12 mg/L chemical oxygen demand (COD), 0.662 mg/L NH₄⁺-N, 7.2 mg/L total nitrogen (TN), and 6 mg/L SS, indicating the effectiveness of the HBR process for treating real domestic wastewater.     

Surface modification of mesoporous silica nanoparticle with 4-triethoxysilylaniline to enhance seawater desalination properties of thin-film nanocomposite reverse osmosis membranes

• Mesoporous silica nanoparticle was modified with 4-triethoxysilylaniline. • AMSN-based TFN-RO membranes were prepared for seawater desalination. • Water transport capability of the AMSN was limited by polyamide. • Polyamide still plays a key role in permeability of the TFN RO membranes. Mesoporous silica nanoparticles (MSN), with higher water permeability than NaA zeolite, were used to fabricate thin-film nanocomposite (TFN) reverse osmosis (RO) membranes. However, only aminoalkyl-modified MSN and low-pressure (less than 2.1 MPa) RO membrane were investigated. In this study, aminophenyl-modified MSN (AMSN) were synthesized and used to fabricate high-pressure (5.52 MPa) RO membranes. With the increasing of AMSN dosage, the crosslinking degree of the aromatic polyamide decreased, while the hydrophilicity of the membranes increased. The membrane morphology was maintained to show a ridge-and-valley structure, with only a slight increase in membrane surface roughness. At the optimum conditions (AMSN dosage of 0.25 g/L), when compared with the pure polyamide RO membrane, the water flux of the TFN RO membrane (55.67 L/m²/h) was increased by about 21.6%, while NaCl rejection (98.97%) was slightly decreased by only 0.29%. However, the water flux of the membranes was much lower than expected. We considered that the enhancement of RO membrane permeability is attributed to the reduction of the effective thickness of the PA layer.     

Ammonia and phosphorus removal from agricultural runoff using cash crop waste-derived biochars

• Orange tree residuals biochar had a better ability to adsorb ammonia. • Modified tea tree residuals biochar had a stronger ability to remove phosphorus. • Partially-modified biochar could remove ammonia and phosphorus at the same time. • The real runoff experiment showed an ammonia nitrogen removal rate of about 80%. • The removal rate of total phosphorus in real runoff experiment was about 95%. Adsorption of biochars (BC) produced from cash crop residuals is an economical and practical technology for removing nutrients from agricultural runoff. In this study, BC made of orange tree trunks and tea tree twigs from the Laoguanhe Basin were produced and modified by aluminum chloride (Al-modified) and ferric sulfate solutions (Fe-modified) under various pyrolysis temperatures (200°C–600°C) and residence times (2–5 h). All produced and modified BC were further analyzed for their abilities to adsorb ammonia and phosphorus with initial concentrations of 10–40 mg/L and 4–12 mg/L, respectively. Fe-modified Tea Tree BC 2h/400°C showed the highest phosphorus adsorption capacity of 0.56 mg/g. Al-modified Orange Tree BC 3h/500°C showed the best performance for ammonia removal with an adsorption capacity of 1.72 mg/g. FTIR characterization showed that P = O bonds were formed after the adsorption of phosphorus by modified BC, N-H bonds were formed after ammonia adsorption. XPS analysis revealed that the key process of ammonia adsorption was the ion exchange between K⁺ and NH₄⁺. Phosphorus adsorption was related to oxidation and interaction between PO₄^3– and Fe³⁺. According to XRD results, ammonia was found in the form of potassium amide, while phosphorus was found in the form of iron hydrogen phosphates. The sorption isotherms showed that the Freundlich equation fits better for phosphorus adsorption, while the Langmuir equation fits better for ammonia adsorption. The simulated runoff infiltration experiment showed that 97.3% of ammonia was removed by Al-modified Orange tree BC 3h/500°C, and 92.9% of phosphorus was removed by Fe-modified Tea tree BC 2h/400°C.     

The combined effects of biomass and temperature on maximum specific ammonia oxidation rate in domestic wastewater treatment

• Actual SAORs was determined using MLVSS and temperature. • Measured SAOR decreased with increasing MLVSS 1.1‒8.7 g/L. • Temperature coefficient (θ) decreased with increasing MLVSS. • Nitrification process was dynamically simulated based on laboratory-scale SBR tests. • A modified model was successfully validated in pilot-scale SBR systems. Measurement and predicted variations of ammonia oxidation rate (AOR) are critical for the optimization of biological nitrogen removal, however, it is difficult to predict accurate AOR based on current models. In this study, a modified model was developed to predict AOR based on laboratory-scale tests and verified through pilot-scale tests. In biological nitrogen removal reactors, the specific ammonia oxidation rate (SAOR) was affected by both mixed liquor volatile suspended solids (MLVSS) concentration and temperature. When MLVSS increased 1.6, 4.2, and 7.1-fold (1.3‒8.9 g/L, at 20°C), the measured SAOR decreased by 21%, 49%, and 56%, respectively. Thereby, the estimated SAOR was suggested to modify when MLVSS changed through a power equation fitting. In addition, temperature coefficient (θ) was modified based on MLVSS concentration. These results suggested that the prediction of variations ammonia oxidation rate in real wastewater treatment system could be more accurate when considering the effect of MLVSS variations on SAOR.     

Integration of microbial reductive dehalogenation with persulfate activation and oxidation (Bio-RD-PAO) for complete attenuation of organohalides

•Bio-RD-PAO can effectively and extensively remove organohalides. •Bio-RD alone effectively dehalogenate the highly-halogenated organohalides. •PAO alone is efficient in degrading the lowly-halogenated organohalides. •The impacts of PAO on organohalide-respiring microbial communities remain elusive. •Bio-RD-PAO provides a promising solution for remediation of organohalide pollution. Due to the toxicity of bioaccumulative organohalides to human beings and ecosystems, a variety of biotic and abiotic remediation methods have been developed to remove organohalides from contaminated environments. Bioremediation employing organohalide-respiring bacteria (OHRB)-mediated microbial reductive dehalogenation (Bio-RD) represents a cost-effective and environmentally friendly approach to attenuate highly-halogenated organohalides, specifically organohalides in soil, sediment and other anoxic environments. Nonetheless, many factors severely restrict the implications of OHRB-based bioremediation, including incomplete dehalogenation, low abundance of OHRB and consequent low dechlorination activity. Recently, the development of in situ chemical oxidation (ISCO) based on sulfate radicals (SO₄^·−) via the persulfate activation and oxidation (PAO) process has attracted tremendous research interest for the remediation of lowly-halogenated organohalides due to its following advantages, e.g., complete attenuation, high reactivity and no selectivity to organohalides. Therefore, integration of OHRB-mediated Bio-RD and subsequent PAO (Bio-RD-PAO) may provide a promising solution to the remediation of organohalides. In this review, we first provide an overview of current progress in Bio-RD and PAO and compare their limitations and advantages. We then critically discuss the integration of Bio-RD and PAO (Bio-RD-PAO) for complete attenuation of organohalides and its prospects for future remediation applications. Overall, Bio-RD-PAO opens up opportunities for complete attenuation and consequent effective in situ remediation of persistent organohalide pollution.     

Different response of bacterial community to the changes of nutrients and pollutants in sediments from an urban river network

• Bacterial community varied spatially in sediments from the urban river network. • Key environmental factors shaping bacterial community were detected by RDA. • Bacterial co-occurrence networks changed at different levels of nutrient and metal. • Potential indicator species were selected to predict pollution risk in sediment. Microbial communities in sediment are an important indicator linking to environmental pollution in urban river systems. However, how the diversity and structure of bacterial communities in sediments from an urban river network respond to different environmental factors has not been well studied. The goal of this study was to understand the patterns of bacterial communities in sediments from a highly dense urbanized river network in the lower Yangtze River Delta by Illumina MiSeq sequencing. The correlations between bacterial communities, the environmental gradient and geographical distance were analyzed by redundancy analysis (RDA) and network methods. The diversity and richness of bacterial community in sediments increased from upstream to downstream consistently with the accumulation of nutrient in the urban river network. Bacterial community composition and structure showed obvious spatial changes, leading to two distinct groups, which were significantly related to the characteristics of nutrient and heavy metal in sediments. Humic substance, available nitrogen, available phosphorus, Zn, Cu, Hg and As were selected as the key environmental factors shaping the bacterial community in sediments based on RDA. The co-occurrence patterns of bacterial networks showed that positive interaction between bacterial communities increased but the connectivity among bacterial genera and stability of sediment ecosystem reduced under a higher content of nutrient and heavy metal in average. The sensitive and ubiquitous taxa with an overproportional response to key environmental factors were detected as indicator species, which provided a novel method for the prediction of the pollution risk of sediment in an urban river network.     

Enhanced hydrogen production in microbial electrolysis through strategies of carbon recovery from alkaline/thermal treated sludge

• High hydrogen yield is recovered from thermal-alkaline pretreated sludge. • Separating SFL by centrifugation is better than filtration for hydrogen recovery. • The cascaded bioconversion of complex substrates in MECs are studied. • Energy and electron efficiency related to substrate conversion are evaluated. The aim of this study was to investigate the biohydrogen production from thermal (T), alkaline (A) or thermal-alkaline (TA) pretreated sludge fermentation liquid (SFL) in a microbial electrolysis cells (MECs) without buffer addition. Highest hydrogen yield of 36.87±4.36 mgH₂/gVSS (0.026 m³/kg COD) was achieved in TA pretreated SFL separated by centrifugation, which was 5.12, 2.35 and 43.25 times higher than that of individual alkaline, thermal pretreatment and raw sludge, respectively. Separating SFL from sludge by centrifugation eliminated the negative effects of particulate matters, was more conducive for hydrogen production than filtration. The accumulated short chain fatty acid (SCFAs) after pretreatments were the main substrates for MEC hydrogen production. The maximum utilization ratio of acetic acid, propionic acid and n-butyric acid was 93.69%, 90.72% and 91.85%, respectively. These results revealed that pretreated WAS was highly efficient to stimulate the accumulation of SCFAs. And the characteristics and cascade bioconversion of complex substrates were the main factor that determined the energy efficiency and hydrogen conversion rate of MECs.     

Synthesis of vinasse-dolomite nanocomposite biochar via a novel developed functionalization method to recover phosphate as a potential fertilizer substitute

• Nanocomposites were prepared by adding dolomite to vinasse at different ratio. • Textural and morphological features of adsorbents were studied in detail. • CCD based RSM was used for investigation of P ion removal by nanocomposite. • The q_m based on Langmuir model for modified vinasse biochar was 178.57 mg/g. • P loaded nanocomposite improved plant growth and could be utilized as P-fertilizer. The effectiveness of phosphate (P) removal from aqueous solutions was investigated by novel low-cost biochars synthesized from vinasse and functionalized with calcined dolomite. The vinasse-derived biochar, synthesized via pyrolysis at different temperatures, showed easy preparation and a large surface area. The novel vinasse biochar nanocomposites were prepared by adding dolomite to the vinasse biochars with different weight percentages (10, 20 and 30%). The characteristics of the prepared materials were identified for further understanding of the inherent adsorption mechanism between P ions and vinasse biochars. Vinasse-dolomite nanocomposite was very effective in the adsorption of P species from aqueous media. The effect of the operational factors on Vinasse-dolomite nanocomposite was explored by applying response surface methodology (RSM). According to RSM results, the optimum condition was achieved to be contact time 90 (min), 250 (mg/L) of P concentration and pH 7. Thermodynamic isotherm and kinetic studies were applied on experimental data to understand the adsorption behavior. The Vinasse-dolomite nanocomposite revealed preferential P species adsorption in the presence of co-existing anions. The P species could be recovered by 1.0 M HCl where the efficiency was not affected up to the fifth cycle. The P-loaded Vinasse-dolomite nanocomposite was successfully tested on a plant; it significantly improved its growth and proved its potency as a P-based fertilizer substitute.