Perfluorinated compounds in water and sediment from coastal regions of the northern Bohai Sea,China

Concentrations of perfluorooctanesulfonate (PFOS), perfluorooctanoic acid (PFOA) and other perfluorinated compounds (PFCs) were measured in water and sediment from coastal Bohai Bay and surrounding rivers flowing into the bay. Of the 15 PFCs measured, PFOS and PFOA were detected with the greatest frequency. Concentrations in water ranged from<0.2 to 31 ng·L^?1 and<1.0 to 82 ng·L^?1 for PFOS and PFOA, respectively. Concentrations of PFOS and PFOA in sediments ranged from<0.1 to 2.0 ng·g^?1 dw and<0.1 to 0.5 ng·g^?1 dw, respectively. Concentrations of PFCs in Bohai Bay were less than those observed in other areas in Asia, but greater concentrations of ∑PFCs were observed in the Dalin River with concentrations increasing from upstream to downstream, and the greatest concentrations in sediment were observed in tidal flats. The ratio of ∑PFCs in sediment and water indicated that sediment could serve as a significant sink for PFUnA.     

Decolorization of azo dyes by a salt-tolerant Staphylococcus cohnii strain isolated from textile wastewater

The salt-tolerant Staphylococcus cohnii strain, isolated from textile wastewater, has been found effective on decolorizing several kinds of azo dyes with different structures. The optimal conditions for azo dye acid red B (ARB) decolorization by S. cohnii were determined to be pH = 7.0 and 30°C. The decolorization efficiency increased with the increase of the salinity concentration, and around 90% of ARB (100 mg·L^?1) could be decolorized in 24 h when the salinity concentration was up to 50 g·L^?1. Moreover, the strain could still decolorize 19% of ARB in 24 h even when the NaCl concentration was increased to 150 g·L^?1. Meanwhile, the dependence of the specific decolorization rate by S. cohnii on the ARB concentration could be described with Michaelis-Menten kinetics (K _m = 585.7mg·L^?1, V _max = 109.8 mg·g cell^?1·h^?1). The addition of quinone redox mediator, named 2-hydroxy-1,4-naphthoquinone and anthraquinone-2,6-disulfonate, significantly accelerated the decolorization performance of S. cohnii. Furtherly, the activities of azoreductase (0.55 ??mol·mg protein^?1·min^?1) and Nicotineamide adenine dinucleotide-dichlorophenol indophenol (NADH-DCIP) reductase (8.9 ??mol·mg protein^?1·min^?1) have been observed in the crude cell extracts of S. cohnii. The decolorization products of ARB were analyzed by HPLC-MS, and the results indicated the reductive pathway was responsible for azo dye decolorization by S. cohnii.     

Adsorption of fluoride on clay minerals and their mechanisms using X-ray photoelectron spectroscopy

This research investigates the adsorption mechanisms of fluoride (F) on four clay minerals (kaolinite, montmorillonite, chlorite, and illite) under different F^? concentrations and reaction times by probing their fluoride superficial layer binding energies and element compositions using X-ray photoelectron spectroscopy (XPS). At high F^? concentrations (C ₀ = 5?C1000 mg·L^?1), the amount of F^? adsorbed (Q _F), amount of hydroxide released by clay minerals, solution F^? concentration, and the pH increase with increasing C ₀. The increases are remarkable at C ₀>50 mg·L^?1. The QF increases significantly by continuously modifying the pH level. At C ₀<5?C100 mg·L^?1, clay minerals adsorb H⁺ to protonate aluminum-bound surface-active hydroxyl sites in the superficial layers and induce F^? binding. As the C ₀ increases, F^?, along with other cations, is adsorbed to form a quasi-cryolite structure. At C ₀>100 mg·L^?1, new minerals precipitate and the product depends on the critical Al³⁺ concentration. At [Al³⁺]>10^?11.94 mol·L^?1, cryolite forms, while at [Al³⁺]<10^?11.94 mol·L^?1, AlF₃ is formed. At low C ₀ (0.3?C1.5 mg·L^?1), proton transfer occurs, and the F^? adsorption capabilities of the clay minerals increase with time.     

Isolation and characterisation of a carbofuran degrading Burkholderia sp. PCL3 from carbofuran-phytoremediated rhizosphere soil

A bacterial strain capable of degrading carbofuran as the sole carbon source was isolated from carbofuran-phytoremediated rhizosphere soil of rice. A 16S rRNA study identified the strain as Burkholderia sp. (isolate PCL3). Free cells of isolate PCL3 possessed inhibitory-type degradation kinetics with a q _max of 0.087 day^?1 and S _m of 248.76 mg·L^?1. Immobilised PCL3 on corncob and sugarcane bagasse possessed Monod-type degradation kinetics with a q _max of 0.124 and 0.098 day^?1, respectively. The optimal pH and temperature with the highest degradation rate coefficient of carbofuran were pH 7.5 and 35 °C, respectively.     

Rice seedlings under cadmium stress: effect of silicon on growth,cadmium uptake,oxidative stress,antioxidant capacity and root and leaf structures

In this study, the effect of silicon (Si) addition on cadmium (Cd) toxicity in rice seedlings was investigated. After a series of screening experiments, 50 μmol·L^?1 of Cd and 10 μ mol·L^?1 of Si were selected. Treatment of rice seedlings with Cd (50 μ mol·L^?1) resulted in significant accumulation of this metal in roots and shoots. The data revealed that accumulation of Cd resulted in oxidative stress in rice seedlings as evidenced by increased accumulation of hydrogen peroxide (H₂O₂) and malondialdehyde (MDA; a peroxidation product of lipids). However, addition of Si (10 μ mol·L^?1) together with Cd prevented accumulation of Cd, H₂O₂ and MDA. Antioxidant capacity was decreased by Cd but enhanced by Si addition. Cd decreased the length and frequency of root hairs, stomatal frequency, and distorted leaf mesophyll cells and vascular bundles. However, addition of Si together with Cd reduced these abnormalities. The results showed that addition of exogenous Si protected rice seedlings against Cd toxicity by preventing Cd accumulation and oxidative stress (H₂O₂ and MDA accumulation) by increasing Si accumulation and antioxidant capacity, which maintained the structure and integrity of leaf and root.     

Solar-induced generation of singlet oxygen and hydroxyl radical in sewage wastewaters

Singlet oxygen (¹O₂) and hydroxyl radical (·OH) play an important role in the degradation of pollutants in surface waters. However, the mechanism underlying the photochemical generation of ¹O₂ and ·OH in wastewaters is poorly known. Here we studied the photo-induced generation of ¹O₂ and ·OH in different sewage treatment plant units. The correlation between the generation of ¹O₂ and ·OH and the water constituents was discussed. Our results show that in sewage units the ¹O₂ formation rate ranges from 2.19 × 10^?8 to 6.74 × 10^?8 mol L^?1 s^?1, and the ·OH formation rate ranges from 1.7 × 10^?11 to 3.06 × 10^?10 mol L^?1 s^?1. The average ¹O₂ formation rates in the various sewage units are similar to those in wetland and estuarine waters containing rich dissolved organic matter and 2–4 times higher than those in lake and seawater samples. The average ·OH formation rates of the sewage units are 5–50 times higher than for other water samples reported. The ·OH generation rate increased with the iron content with a correlation coefficient of 0.85, which indicates that the photo-Fenton reaction plays a dominant role in ·OH generation in sewage wastewater.     

Efficient oxidation of bisphenol A with oxysulfur radicals generated by iron-catalyzed autoxidation of sulfite at circumneutral pH under UV irradiation

There is actually a need for efficient methods to clean waters and wastewaters from pollutants such as the bisphenol A endocrine disrupter. Advanced oxidation processes currently use persulfate or peroxymonosulfate to generate sulfate radicals. There are, however, few reports on the use of sulfite to generate sulfate radicals, instead of persulfate or peroxymonosulfate, except for dyes. Here we studied the degradation of the bisphenol A using iron(III) as catalyst and sulfite as precursor of oxysulfur radicals, at initial pH of 6, under UV irradiation at 395 nm. The occurrence of radicals was checked by quenching with tert-butyl alcohol and ethanol. Bisphenol A degradation products were analyzed by liquid chromatography coupled with mass spectrometry (LC–MS). Results reveal that iron(III) or iron(II) have a similar oxidation efficiency. Quenching experiments show that the oxidation rate of bisphenol A is 47.7 % for SO ₄ ^·? , 37.3 % for SO ₅ ^·? and 15 % for HO^·. Bisphenol A degradation products include catechol and quinone derivatives. Overall, our findings show that the photo-iron(III)–sulfite system is efficient for the oxidation of bisphenol A at circumneutral pH.     

Photosynthetic and growth responses of Japanese sasabamo (Potamogeton wrightii Morong) under different photoperiods and nutrient conditions

Controlled laboratory experiments were conducted to examine how photosynthesis and growth occur in Potamogeton wrightii Morong under different photoperiods and nutrient conditions. The experiment was based on a 3×2 factorial design with three photoperiods (16, 12 and 8 h) of 200 μE · m^?2·s^?1 irradiance and two nutrient conditions, high (90 μmol N · L^?1·d^?1 and 9 μmol P · L^?1·d^?1) and low (30 μmol N L^?1·d^?1 and 3 μmol P · L^?1·d^?1). After 14, 28, 56 and 70 days of growth, plants were harvested to determine net photosynthesis rate and various growth parameters. Above- and below-ground biomass were investigated on days 56 and 70 only. Plants under low nutrient conditions had greater leaf area, more chlorophyll a, a higher rate of net photosynthesis and accumulated more above- and below-ground biomass than plants in the high nutrient condition. Plants with an 8 h photoperiod in the low nutrient condition had a significantly higher rate of net photosynthesis, whereas 8 h photoperiod plants in the high nutrient condition had a lower rate of net photosynthesis and their photosynthetic capacity collapsed on day 70. We conclude that P. wrightii has the photosynthetic plasticity to overcome the effects of a shorter photoperiod under a tolerable nutrient state.     

The removal of arsenic from water with natural and modified clinoptilolite

The presence of increased arsenic concentrations in Eastern Croatia is a consequence of the geological composition of the soil. Because of its known harmful effects, arsenic removal is of high importance and adsorption represents an attractive and economically efficient approach to arsenic removal. The use of zeolites obtained from the Donje Jesenje deposit, Croatia (CZ) and the Zlatokop deposit in Vranjska Banja, Serbia (SZ) in Na- and Fe–Na-modified forms was investigated in order to effectively remove arsenate and arsenite from aqueous solutions. The adsorption kinetics of arsenic was studied as a function of the initial arsenate and arsenite concentrations (30–300 μg · L^?1), equilibration time (3–48 h), pH (5–10) and in the presence of sulfate and phosphate at initial concentrations of 0.2–0.5 mg · L^?1. In order to estimate sorption constants designating the sorption capacity and affinity of the zeolites samples, the experimental results were fitted to the Langmuir and Freundlich sorption isotherms. Desorption tests conducted with 1–3 mol · L^?1 HCl indicated that arsenate sorption was irreversible. The results obtained indicated that use of the Serbian zeolite in the Fe–Na-modified form (Fe–Na-SZ) was favourable for arsenate removal from water containing up to 30 μg As · L^?1.     

Thermal treatment of plasma-synthesized goethite improves Fenton-like degradation of orange II dye

Various iron oxides are used for Fenton reactions to degrade organic pollutants. The degradation efficiency may be improved by transforming an iron oxide phase to another. Here, we report on the transformation of goethite into hematite by thermal treatment at 400 °C. The products were analyzed by X-ray diffractometry, Raman spectroscopy, scanning electron microscopy and N₂-physisorption. The catalytic activities were measured for orange II bleaching at initial concentration of 25 mg L^?1, pH 3, catalyst concentration of 0.2 g L^?1; 5 mM H₂O₂, 30 °C. Results show that the synthesized goethite was successfully transformed into hematite, and the specific surface area of the material increased from 134 to 163 m² g^?1. The bleaching efficiency of the orange II dye reached 100 % for the hematite product, versus 78 % for goethite. Therefore, a moderate thermal treatment of a plasma-synthesized goethite improves the catalytic oxidation of organic pollutants.     

Degradation of carbon tetrachloride in thermally activated persulfate system in the presence of formic acid

The thermally activated persulfate (PS) degradation of carbon tetrachloride (CT) in the presence of formic acid (FA) was investigated. The results indicated that CT degradation followed a zero order kinetic model, and CO ₂ ^– · was responsible for the degradation of CT confirmed by radical scavenger tests. CT degradation rate increased with increasing PS or FA dosage, and the initial CT had no effect on CT degradation rate. However, the initial solution pH had effect on the degradation of CT, and the best CT degradation occurred at initial pH 6. Cl^– had a negative effect on CT degradation, and high concentration of Cl^– displayed much strong inhibition. Ten mmol·L^–1HCO ₃ ^– promoted CT degradation, while 100 mmol·L^–1NO ₃ ^– inhibited the degradation of CT, but SO ₄ ^2– promoted CT degradation in the presence of FA. The measured Cl–concentration released into solution along with CT degradation was 75.8% of the total theoretical dechlorination yield, but no chlorinated intermediates were detected. The split of C-Cl was proposed as the possible reaction pathways in CT degradation. In conclusion, this study strongly demonstrated that the thermally activated PS system in the presence of FA is a promising technique in in situ chemical oxidation (ISCO) remediation for CT contaminated site.     

Preparation of TiO2/MCM-41 by plasma enhanced chemical vapor deposition method and its photocatalytic activity

Titanium dioxide is coated on the surface of MCM-41 wafer through the plasma enhanced chemical vapor deposition (PECVD) method using titanium isopropoxide (TTIP) as a precursor. Annealing temperature is a key factor affecting crystal phase of titanium dioxide. It will transform an amorphous structure to a polycrystalline structure by increasing temperature. The optimum anatase phase of TiO₂ which can acquire the best methanol conversion under UV-light irradiation is obtained under an annealing temperature of 700°C for 2 h, substrate temperature of 500°C, 70 mL·min^?1 of oxygen flow rate, and 100W of plasma power. In addition, the films are composed of an anatase-rutile mixed phase, and the ratio of anatase to rutile varies with substrate temperature and oxygen flow rate. The particle sizes of titanium dioxide are between 30.3 nm and 59.9 nm by the calculation of Scherrer equation. Under the reaction conditions of 116.8 mg·L^-1 methanol, 2.9 mg·L^?1 moisture, and 75°C of reaction temperature, the best conversion of methanol with UV-light is 48.2% by using the anatase-rutile (91.3/8.7) mixed phase TiO₂ in a batch reactor for 60 min. While under fluorescent light irradiation, the best photoactivity appears by using the anatase-rutile (55.4/44.6) mixed phase TiO₂ with a conversion of 40.0%.     

Seasonal variation assessment of impact of industrial effluents on physicochemical parameters of surface water of River Challawa,Kano, Nigeria

The physicochemical characteristics of the River Challawa in the Kumbotso Local Government Area of Kano State were studied across four seasons (warm and dry, cold and dry, hot and dry, and warm and wet seasons) between October 2006 and August 2008. Physicochemical parameters like pH, electrical conductivity (EC), total dissolved solids (TDSs), total suspended solids (TSS), alkalinity, turbidity, hardness, dissolved oxygen (DO), biological oxygen demand (BOD), chemical oxygen demand (COD), ammonia, chloride, nitrate, sulfate, and phosphate were analyzed and compared with standard permissible limits. The mean range of parameters determined across the seasons revealed: 8.36–8.59 for pH; 209.57–335.27 µS cm^?1 for EC; 134.05–208.5 mg L^?1 for TDS; 182.4–273.45 mg L^?1 for TSS; 125.3–276.07 mg L^?1 for hardness; 16.11–40 mg L^?1 of CaCO₃ for alkalinity; 2.76–3.78 mg L^?1 for DO; 1.9–43.33 mg L^?1 for BOD; 231.67–310.06 mg L^?1 for COD; 221.67–441.67 mg L^?1 for turbidity; 17.98–35.89 mg L^?1 for chloride; 5.12–8.89 mg L^?1 for nitrate; 37–558.83 mg L^?1 for sulfate; and 0.47–0.81 mg L^?1 for phosphate. Data showed that all parameters determined were significantly different among the various sampled sites across seasons. With the exception of COD, EC, and phosphate, all other parameters determined were within the WHO and USPH standard limits.     

Effective degradation of tetracycline by mesoporous Bi<Subscript>2</Subscript>WO<Subscript>6</Subscript> under visible light irradiation

Bi₂WO₆ was synthesized with a hydrothermal method at different pHs and used for the degradation of tetracycline (TC) in water. The mesoporous Bi₂WO₆ prepared at pH 1 (BWO-1) displayed the highest adsorption and degradation capacity to TC due to its large surface area and more efficient capacity to separate photogenerated electrons and holes. 97% of TC at 20 mg·L^?1 was removed by BWO-1 at 0.5 g·L^?1 after 120 min irradiation under simulated solar light. Only 31% of the total organic carbon (TOC) was removed after 360 min irradiation although the TC removal reached 100%, suggesting that TC was mainly transformed to intermediate products rather than completely mineralized. The intermediates were identified by high-performance liquid chromatography-time of flight-mass spectrometry (HPLC-TOF-MS) and possible photodegradation pathways were proposed.     

Effects of ethyl 2-methyl acetoacetate (EMA) on the growth of Phaeodactylum tricornutum and Skeletonema costatum

We investigated the effects of ethyl 2-methyl acetoacetate (EMA) on growth of the marine diatom algae Phaeodactylum tricornutum (P. tricornutum) and Skeletonema costatum (S. costatum). Growth of P. tricornutum was significantly inhibited by the minimum concentration (3.5 mmol·L ^?1) of EMA at lower initial algal densities (IADs) (3.6×10⁴ and 3.3×10⁵ cells·mL ^?1). However, at the highest IAD, significant growth inhibition was found at above 7 mmol·L ^?1 of EMA exposure. In S. costatum, EMA concentrations of 10.5 mmol·L ^?1 or more significantly inhibited growth at lower IAD (3×10⁴ and 1.8×10⁵ cells·mL ^?1); at the highest IAD, only EMA concentrations above 14 mmol·L ^?1 obviously inhibited the growth of S. costatum. Changes in specific growth rates and pigment were consistent with algal growth, but only at higher EMA concentrations or lower IAD values was the ratio of chlorophyll a (Chla) to carotenoid significantly lower than the control. Medium effective concentration (EC ₅₀) values were in the order 4.07, 8.03 and 12.27 mmol·L ^?1 for P. tricornutum and 7.48, 11.92 and 17.22 mmol·L ^?1 for S. costatum. All these results show that the effect of EMA on the growth of algae was species specific and mainly depended on IAD, which might be an important factor to influence algal growth.     

Fe-pillared bentonite,a stable Fenton catalyst for treatment of petroleum refinery wastewater

Fe-pillared bentonite (Fe-Bent) was prepared by ion exchange as heterogeneous catalyst for degradation of organic contaminants in petroleum refinery wastewater. X-ray diffraction analysis showed the existence of α-Fe₂O₃. The effects of pH, H₂O₂ concentration, and catalyst dosage on the rate of lowering the chemical oxygen demand (COD) were investigated in detail. Removal efficiency of COD can be up to 92% under the following conditions: dosage of Fe-Bent 7 g L^?1, pH value 3, and H₂O₂ concentration 10 mmol L^?1. Fe-Bent showed good stability for the degradation of organics in petroleum refinery wastewater for five cycles. The adsorption of organics in wastewater onto Fe-Bent could be well described by a pseudo-second-order kinetic model.     

Growth inhibition and DNA damage in the earthworm (Eisenia fetida) exposed to perfluorooctane sulphonate and perfluorooctanoic acid

An artificial soil method was applied to study the effects of perfluorooctane sulphonate (PFOS) and perfluorooctanoic acid (PFOA) on earthworms (Eisenia fetida). Survival, growth inhibition and damage to DNA of earthworms were detected after 14 d acute exposure. The 14 d-LC₅₀ of PFOS and PFOA was 478.0?mg·kg^?1 dw and 759.6?mg·kg^?1 dw, respectively, indicating that they were of low toxicity. Both PFOS and PFOA could significantly inhibit the growth of earthworms after 14 d exposure, and growth inhibition rates increased with the greater concentrations of PFOS or PFOA, showing a dose–response relationship (PFOS: r?=?0.951, P r?=?0.962, P?P?50 of PFOS was lower than that of PFOA, the growth inhibition rate of earthworm exposed to PFOS was higher than that exposed to PFOA at the same concentration level, and the median values of TL, CL and OTM in PFOS treatments were also higher than those in PFOA treatments. In conclusion, both these fluorine compounds were moderately toxic to earthworms, but the PFOS effect was greater than that of PFOA.     

Sonocatalytic degradation of tetracycline antibiotic in aqueous solution by sonocatalysis

Tetracycline (TC), one of the most common antibiotics, is often poorly bio-degraded in conventional wastewater treatment plants. In this study, the sonocatalytic degradation of TC was investigated using TiO₂ nano-particles as catalyst. The effect of pH, initial TC concentrations, reaction times, and H₂O₂ concentrations were evaluated. The efficacy of ultrasonic irradiation alone in the removal of this pollutant was negligible but removal efficiency increased upon addition of TiO₂ up to 250 mg L^?1; increase of pH and initial TC concentration attenuated TC degradation. Addition of H₂O₂ raised the removal efficiency so that complete removal of TC was achieved within 75 min.     

Rapid and sensitive headspace gas chromatographic method for cyanide determination in whole blood

We reported a simple and rapid headspace (HS) gas chromatographic (GC) assay for the determination of cyanide in human whole blood obtained from both cadaveric and intoxicated subjects. The poison was extracted from whole blood samples by HS technique after 10 min incubation at 80°C with a HCl (1N) acidic solution supplemented with 30 g L^?1 of sodium chloride and 10 mg L^?1 of isopropanol as internal standard. A SGE WAX capillary column (30 m × 0.32 mm ID × 0.5 µm df) was used. The Flame Ionization Detector (FID) was set at 250°C. The detection and the quantification limits were 0.02 and 0.2 mg L^?1, respectively. In the within-day study, the coefficients of variation for three different whole blood cyanide concentrations varied between 3.2 and 6.5%, whereas those in the day-to-day study varied between 4.8 and 6.3%. The assay was performed in less than 20 min per sample, which appears to be suitable for emergency toxicological tasks involved in diagnosis of cyanide poisoning.     

Green chemistry approach to analysis of formic acid and acetic acid in aquatic environment by headspace water-based liquid-phase microextraction and high-performance liquid chromatography

A simple and totally organic-free (green) method, viz. headspace water-based liquid-phase microextraction combined with high-performance liquid chromatography-ultraviolet detection has been successfully developed for analysis of formic acid and acetic acid in environmental water samples. A microdrop of an aqueous solution of sodium hydroxide was suspended from the tip of a microsyringe needle over the headspace of the stirred sample solution containing the analytes at pH 1.0 for a given time. The microdrop was then retracted into the microsyringe, diluted with HPLC mobile phase, and injected to HPLC. Optimum efficiency has been achieved for: 3.0 µL NaOH microdrop (0.1 mol L^?1) exposed for 15 min over the headspace of an aqueous sample of 6.5 mL at 55 °C, containing 15% w/v of Na₂SO₄, adjusted to pH = 1.0 and stirred at 750 rpm. Under these conditions, enrichment factors of 162 and 187, limits of detection of 0.3 and 0.1 µg L^?1 (S/N = 3) with dynamic linear ranges of 1–500 and 0.5–500 µg L^?1 were obtained for formic acid and acetic acid, respectively. A reasonable repeatability (5.8% ≤ RSD ≤ 8.8%, n = 6) and satisfactory linearity (r² ≥ 0.997) illustrated the performance of the method.