HYDROLOGIC AND HYDRAULIC RESEARCH IN MOUNTAIN RWERS1

ABSTRACT: Although our current (1990) knowledge of hydrologic and hydraulic processes is based on many years of study, there are river environments where these processes are complex and poorly understood. One of these environments is in mountainous areas, which cover about 25 percent of the United States. Use of conventional hydrologic and hydraulic techniques in mountain-river environments may produce erroneous results and interpretations in a wide spectrum of water-resources investigations. An ongoing U.S. Geological Survey research project is being conducted to improve the understanding of hydrologic and hydraulic processes of mountainous areas and to improve the results of subsequent hydrologic investigations. Future hydrologic and hydraulic research needs in mountainous areas are identified.     

An Institutional and Opinion Analysis of Colorado’s Hydraulic Fracturing Disclosure Policy

Hydraulic fracturing and oil and natural gas development are possibly the most contentious energy and environmental issues to face the USA in the twenty-first century. One point of contention is the disclosure of fluids used in the hydraulic fracturing process. This paper analyses the Colorado 2011 policy requiring disclosure of hydraulic fracturing fluid information, considered one of the first comprehensive hydraulic fracturing disclosure policies in the country. We conduct an institutional analysis of the disclosure policy to understand how the policy establishes information flows and grants and restricts choices by targeted actors. We then analyse the opinions of people actively involved in hydraulic fracturing debates in Colorado to assess whether they view the disclosure policy as resolving problems. The institutional analysis illustrates how the policy allocates responsibilities in sending and receiving information and the opinion survey shows divergence in perceptions of its potential to resolve problems associated with chemical use or disclosure. Most respondents are in agreement that the new policy failed to build public trust of the hydraulic fracturing process.     

ASSESSMENT OF HYDRAULIC PROPERTIES IN AN UNCONFINED ALLUVIAL AQUIFER NEAR GRAND ISLAND,NEBRASKA1

ABSTRACT: A method is presented to analyze time-drawdown data from one or more observation wells for the calculation of four hydraulic parameters for unconfined aquifers: vertical hydraulic conductivity, horizontal hydraulic conductivity, storage coefficient, and specific yield. The hydraulic parameter results are further analyzed for reliability and the possible ranges of the actual parameter values. After verification using a theoretical example, the method was used to analyze pumping test data from 22 observation wells in an unconfined alluvial aquifer near Grand Island, Nebraska. Results indicate that this method can be used to efficiently calculate the four hydraulic parameters in this type of aquifer. The method can also identify the impact of measurement errors on the parameter estimates, and provide ranges of the actual parameter values. The parameter values calculated using this method were compared to those determined using other theories. It is found that this method is very useful for calculating the hydraulic properties from pumping test data and for analyzing the parameter reliability.     

Modeling Hydraulic and Thermal Electricity Production Based on Genetic Algorithm-Time Series (GATS)

Abstract

This study deals with the estimation of electricity production from hydraulic and thermal sources using the Genetic Algorithm (GA) with time series (TS) approach. Two forms of the mathematical models are developed, of which one is exponential and the second is polynomial. The power form of the Genetic Algorithm-Time Series (GATS) model is used for the thermal electricity production. The polynomial form of the GATS is used for the electricity production from the hydraulic sources. The GATS weighting parameters are obtained by minimizing the Sum of Squared Error (SSE) between observed and estimated electricity production from both sources. Therefore, the fitness function adapted is the minimization of the SSE for use in the GA process. The application of the GATS model is correspondingly presented. Some future scenarios are made to increase the electricity production from hydraulic sources. Variations of the electricity production from thermal and hydraulic energy sources are analyzed. Future prospects of electricity production are dealt with in terms of policy changes. The GATS models are used for making scenarios for future electricity planning policy. Results also show if current trend continues, the thermal electricity production amounts to 75% of the total electricity production, which is undesirable for environmental concerns. Results also shows that if new policy is to move from the thermal to hydraulic electricity production, the hydraulic sources will meet the demand until 2020.     

水利工程建设对环境影响的探讨

随着现代工程技术的不断发展,大规模的水利工程建设,为国民经济建设发挥了巨大作用,但同时也对环境造成了影响和危害,因此,如何兴利避害,充分发挥水利工程为人类造福的优势,减少其对环境的不利影响,是我们必须考虑的问题。从水利工程对环境的影响进行探讨并对环境保护提出了建议。     

Indicators for hydraulic and pollution retention assessment of stormwater infiltration basins

Infiltration basins are frequently used for stormwater management even though their long-term evolution is not well understood nor controlled. The two main problems encountered are clogging which compromises the hydraulic capacity of the basin and possible contamination of underlying soil and groundwater. This paper defines a framework for evaluating the hydraulic and pollution retention performance of infiltration basins in the long-term. Sets of context and performance indicators are proposed, along with two complementary modes of evaluation. Context indicators are identified in order to define the clogging and contamination states of the basins. Performance indicators are developed to assess several aspects of basin performance: drainage duration, overflow frequency, predictive life period, particle filtration and pollution trapping. Modes of evaluation include field investigation and long-term simulation modeling. Indicators are tested on five infiltration basins in suburban Lyon (France). Both context indicators and hydraulic performance indicators are reliable and their evaluation is representative of basin behavior. This is not the case for pollution retention performance indicators. Their assessment is difficult because of data quality. Field data has high uncertainties. The model is satisfactory for the hydraulic simulation and the evolution of clogging. Improvements are necessary for pollution flow simulation and the acquisition of better quality data is required.     

GEOSTATISTICAL ESTIMATION OF HORIZONTAL HYDRAULIC CONDUCTIVITY FOR THE KIRKWOOD‐COHANSEY AQUIFER1

ABSTRACT: The Kirkwood‐Cohansey aquifer has been identified as a critical source for meeting existing and expected water supply needs for southern New Jersey. Several contaminated sites exist in the region; their impact on the aquifer has to be evaluated using ground water flow and transport models. Ground water modeling depends on availability of measured hydrogeologic data (e.g., hydraulic conductivity, for parameterization of the modeling runs). However, field measurements of such critical data have inadequate spatial density, and their locations are often clustered. The goal of this study was to research, compile, and geocode existing data, then use geostatistics and advanced mapping methods to develop a map of horizontal hydraulic conductivity for the Kirkwood‐Cohansey aquifer. Spatial interpolation of horizontal hydraulic conductivity measurements was performed using the Bayesian Maximum Entropy (BME) Method implemented in the BMELib code library. This involved the integration of actual measurements with soft information on likely ranges of hydraulic conductivity at a given location to obtain estimate maps. The estimation error variance maps provide an insight into the uncertainty associated with the estimates, and indicate areas where more information on hydraulic conductivity is required.     

不同水力负荷条件下的人工湿地污染处理效果分析

本文研究了水力负荷对抚仙湖北岸典型人工湿地净化河道污水处理效率的影响。研究表明,TN、TP及SS去除率随着水力负荷的增加而下降,COD去除率受水力负荷的影响程度相对较小。综合考虑水力负荷对氮磷、有机物及悬浮物等水质净化效果的影响,如果不考虑其它因素,仅从系统处理效果的角度选择水力负荷,人工湿地系统的最佳水力负荷为0.5 m3/m2·d以下。     

MODELING INFILTRATION WITH VARYING HYDRAULIC CONDUCTWITY UNDER SIMULATED RAINFALL CONDITIONS1

ABSTRACT: Physically-based models are extensively used to simulate the infiltration process under varied field conditions. Most models are based on the deterministic nature of input parameters related to the flow process (such as hydraulic conductivity). These models yield poor predictions of infiltration rates because they do not include the field-scale variations of flow parameters. The paper presents an approach for integrating the field-scale variability of hydraulic conductivity with an infiltration model to simulate infiltration under the rainfall conditions. A model describing the spatial structure of hydraulic conductivity has been developed using stochastic techniques. The stochastic structure of hydraulic conductivity was then incorporated in the Green-Ampt and Mein-Larson infiltration model. The model outputs on the instantaneous infiltration rates and cumulative infiltration were evaluated using the field infiltration data measured under simulated rainfall conditions. The results show that the combined model is capable of rep. resenting the instantaneous infiltration rates and cumulative infiltration of the study soils. The model may, therefore, be used to simulate the rainfall infiltration process for spatially-variable soils under the field conditions.     

HYDRAULIC GEOMETRY AND STREAM CHANNEL BEHAVIOR: A UNCERTAIN LINK1

ABSTRACT: The at-a-station hydraulic geometry of stream channels can serve as a predictor of alluvial stream channel behavior. This geometry is the empirical relations describing changes in water surface width, mean depth, and mean velocity with changing discharge. The exponent values are correlated with channel morphology and behavior such as scour and fill, flow resistance, bank resistance, and competence. Channel behavior and morphology are apparently related, but some causes for effects are uncertain. Several studies, using empirical and theoretical bases, are reviewed here to illustrate the relation between hydraulic geometry and channel behavior, but the relations are not always consistent. Hydraulic geometry variables are easy to measure and readily available, but they do not always reflect what may be more important ones such as turbulence, the velocity distribution profile, and distribution and cohesion of sediment particles. This paper illustrates some of these problems, provides some solutions, and addresses need for more work to better predict stream channel behavior from hydraulic geometry     

IMPACT OF VARIED DATA RESOLUTION ON HYDRAULIC MODELING AND FLOODPLAIN DELINEATION1

ABSTRACT: Current data collection technologies such as light detection and ranging (LIDAR) produce dense digital terrain data that result in more accurate digital terrain models (DTMs) for engineering applications. However, such data are redundant and often cumbersome for hydrologic and hydraulic modeling purposes. Data filtering provides a means of eliminating redundant points and facilitates model preparation. This paper demonstrates the impact of varied data resolution on a case study completed for a 2.3 mi² area with mild slopes (about 001 ft/ft) along Leith Creek near Laurinburg, North Carolina. For the original data set and seven filtered data sets, filtering induced changes in elevation, area, and hydraulic radius were determined for 10 water depths at 23 cross sections. Water surface elevations resulting from HEC‐RAS (Hydrologic Engineering Center‐River Analysis System) models for each data set were then compared. A hydraulic model sensitivity analysis was also conducted to compare filtering error to error introduced by variation in flow rates and roughness values. Finally, automated floodplain delineation was performed for each filter level based on the computed hydraulic model results and the filtered LIDAR elevations. Data filtering results indicate that significant time savings are achieved throughout the modeling process and that filtering to four degrees can be performed without compromising cross‐sectional geometry, hydraulic model results, or floodplain delineation results.     

DETERMINISTIC-SYSTEMIC RELATIONSHIPS IN OVERLAND FLOW ANALYSIS1

ABSTRACT: An analysis of storm runoff is presented, giving primary attention to deterministic-systemic relationships. So that system aspects can be emphasized, other aspects are kept simple; analysis is made for uniform rainfall on a strip of uniform width, limiting direct applicability to small areas. Two relationships between excess rain and time of concentration, one based on hydraulic parameters, the other on hydrologic characteristics, are combined in a solution for peak discharge. The hydraulic expression gives the interrelationship of time of concentration, excess rain, friction, length, and slope. The hydrologic relationship is achieved by converting ordinary intensity-duration curves to corresponding excess rain intensity-duration curves, thereby interrelating excess rain, time of concentration, and loss characteristics. The resulting solution for peak discharge allows for systemic feedback among both hydraulic and hydrologic parameters.     

DETERMINATION OF UNCONFINED AQUIFER HYDRAULIC PROPERTIES FROM RECOVERY TEST DATA1

ABSTRACT: This paper analyzes the sensitivity of drawdown to four hydraulic parameters in unconfined aquifers: horizontal and vertical hydraulic conductivity K_r and K_z, storage coefficient S, and specific yield S_y. Sensitivity coefficients indicate that the sensitivity vanes with time for each aquifer parameter, and K_r, K_z, S, and S_y are identifiable from recovery test data. An inverse method was used to calculate the four parameters from residual drawdowns. Results of application examples demonstrate that residual data provide valid information in the determination of unconfined aquifer hydraulic parameters.     

Estimating Hydraulic Properties of Volcanic Aquifers Using Constant‐Rate and Variable‐Rate Aquifer Tests1

Abstract: In recent years the ground‐water demand of the population of the island of Maui, Hawaii, has significantly increased. To ensure prudent management of the ground‐water resources, an improved understanding of ground‐water flow systems is needed. At present, large‐scale estimations of aquifer properties are lacking for Maui. Seven analytical methods using constant‐rate and variable‐rate withdrawals for single wells provide an estimate of hydraulic conductivity and transmissivity for 103 wells in central Maui. Methods based on constant‐rate tests, although not widely used on Maui, offer reasonable estimates. Step‐drawdown tests, which are more abundantly used than other tests, provide similar estimates as constant‐rate tests. A numerical model validates the suitability of analytical solutions for step‐drawdown tests and additionally provides an estimate of storage parameters. The results show that hydraulic conductivity is log‐normally distributed and that for dike‐free volcanic rocks it ranges over several orders of magnitude from 1 to 2,500 m/d. The arithmetic mean, geometric mean, and median values of hydraulic conductivity are respectively 520, 280, and 370 m/d for basalt and 80, 50, and 30 m/d for sediment. A geostatistical approach using ordinary kriging yields a prediction of hydraulic conductivity on a larger scale. Overall, the results are in agreement with values published for other Hawaiian islands.     

西气东输工程湿陷性黄土塬坡地生态型水工保护研究

西气东输工程靖边-临汾段的黄土地区地形破碎,黄土以粉粒为主,结构疏松,黄土易于完全崩解,浸水后粒状架空结构体系迅速崩解,其抗冲蚀能力极差。本地区降水多为暴雨,强降雨形成的洪水来势猛、历时短,导致黄土塬坡地受水力侵蚀强烈且集中。工程项目区的生态环境脆弱,一旦植被遭到破坏,就可能造成生态系统的破坏。根据西气东输工程和区域的实际情况,进行了生态型水工保护工艺的现场试验研究。试验结果表明,该工艺完全可以达到传统水工保护工艺对黄土塬坡地处理所能达到的强度及效果,并且在管线及水工保护施工完成后将使生态基本得到恢复。     

COMPARATIVE STUDY OF FRESH-SALT WATER INTERFACES USING FINITE ELEMENT AND SIMPLE APPROACHES

ABSTRACT: The fresh-salt water interface in artesian aquifers has been investigated by various techniques on the basis of its analogy to the free surface in earth dams or cores of dams. Although various approximations are used, some more or less exact solutions exist. One of the simple methods, that would appeal to practical workers, was developed by the analysis of hydraulic forces. However, this method has not been checked thoroughly due to the lack of wide ranges of coverage by the more or less exact solutions. In this paper a suggested finite element method is used for the purpose of comparing with the method of hydraulic forces. The presented procedure eliminates some of the difficulties and uncertainties in current finite element procedures. Both methods proved to be in close agreement. Moreover, the hydraulic heads along the upper boundary of the artesian aquifer were found to be in close agreement with Dupuit's equation. The results of this investigation would greatly simplify the more complex management problems when the effects of discharge and/or recharge wells are added to the natural flow effects.     

Karst Hydrological Processes and Grey System Model1

Hao, Yonghong, Jiaojuan Zhao, Huamin Li, Bibo Cao, Zhongtang Li, and Tian‐Chyi J. Yeh, 2012. Karst Hydrological Processes and Grey System Model. Journal of the American Water Resources Association (JAWRA) 48(4): 656‐666. DOI: 10.1111/j.1752‐1688.2012.00640.x Abstract: The karst hydrological processes are the response of karst groundwater system to precipitation. This study provided a concept model of karst hydrological processes. The hydraulic response time of spring discharge to precipitation includes the time that precipitation penetrates through the vadose zone, and the subsequent groundwater pressure wave propagates to a spring outlet. Due to heterogeneities in karst aquifers, the hydraulic response time is different in different areas. By using grey system theory, we proposed a karst hydrological model that offers a calculation of hydraulic response time, and a response model of spring discharge to precipitation. Then, we applied the models to the Liulin Springs Basin, China. In the south part of the Liulin Springs Basin, where large fields of carbonate rocks outcrop with intensive karstification, the hydraulic response time is one year. In the north, where the Ordovician karst aquifer is covered by Quaternary loess sediments, the response time is seven years. The grey system GM(1,3) response model of spring discharge to precipitation was applied in consideration of the hydraulic response time. The model calibration showed that the average error was 6.55%, and validation showed that the average error was 12.19%.     

环境水动力数值模拟的研究现状与展望

水动力数值模拟为水环境中污染物的迁移转化提供了重要的背景。水动力数值模拟的发展经历了数值计算、单因素模拟、多因素模拟3个阶段。本文在分析了环境水动力数值模拟的发展过程与研究现状的基础上,结合当前学科发展动态,预测了其未来研究的主要方向。     

DEVELOPMENT AND APPLICATION OF A MODFLOW PREPROCESSOR USING PERCOLATION THEORY FOR FRACTURED MEDIA1

ABSTRACT: The discrete heterogeneity of fracture distribution and hydraulic discontinuity are the primary difficulties in the modeling of flow in fractured media. The equivalent porous medium (EPM) approach, however, which has been frequently applied to simulate flow in fractured media due to its ease of use, ignores this. This practice results in some severe limitations such as hydraulic head averaging and an inability to handle preferred fluid pathways. The PMF package (a Preprocessor to MODFLOW for Fractured media) was developed employing percolation theory to address these limitations and to utilize the simplicity of the EPM approach at the same time. This preprocessor was applied to a fractured rock aquifer around Cranberry Lake in northern New Jersey. The calibration using hydraulic head observations, validation using water balance, and evaluation using residuals show that the model generated by the PMF package can provide a superior simulation of ground water flow to the EPM approach.     

OPTIMIZATION OF TRANSPORTATION NETWORKS DURING URBAN FLOODING1

ABSTRACT: In this paper a numerical model for flood propagation in urban areas is proposed. It has been applied to evaluate flooding hydraulic characteristics in terms of potential flood elevations, depths, and inundated areas. Furthermore, the algorithm efficiency and the consequent reduced computation time allow the use of the hydraulic model as a part of a more complex system for civil protection actions, planning, and management. During flood events, the transportation network plays a main role both in rescuing people when they are more vulnerable and in moving people and materials from and toward affected areas. The reduced efficiency of this transportation network is evaluated based on a least‐flood‐risk path‐finding algorithm. The results of a case study concerning the northern part of the city of Rome, show that the numerical model for unsteady flow in open channel networks achieves the proposed aims. It has proven to be able to describe the flood hydraulic characteristics and to be suitable for real‐time flood emergency management in urban areas.