Geochemical properties and pollution assessment of heavy metals in the sediments of Daechung Lake,Korea

In order to examine the forms, sources, and pollution of heavy metals—arsenic (As), aluminum (Al), cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), nickel (Ni), lead (Pb), and zinc (Zn)—in Daechung Lake, Korea, sediment samples were collected in November 2014. Daechung Lake was constructed to supply water for human consumption, agricultural use, and industrial use as well as to generate electric power. The lake is stratified in the summer and surrounded mostly by agricultural and mining areas. Our results indicate that the heavy metals (except As and Cd) displayed similar concentrations at all of the sampling stations. As and Cd were high in locations where fine sediments had built up. Based on the enrichment factor of the metals, the sediments collected from all of the sampling stations were highly polluted by As and Cd. Therefore, deposition of heavy metals in Daechung Lake is possibly controlled by grain size and anthropogenic activity, such as drainage from abandoned mines, agricultural activities, and/or the release of wastewater. The most dominant forms for all of the metals were oxide and silicate forms. This suggests that the sediments of Daechung Lake are not highly sulfidic. However, the sediment samples were collected after the collapse of seasonal stratification. Therefore, future studies should include elucidation of major sources for As and Cd and the collection of sediments during months of stratification.     

Spatial variations in selected metal contents and particle size distribution in an urban and rural atmosphere of Islamabad, Pakistan

Spatial variations in total suspended particulate matter (TSP) were investigated for distribution of metals and particle size fractions in the urban and rural atmosphere of Islamabad, Pakistan. The metals Na, K, Fe, Mn, Pb, Cd, Cr, Zn, Ni and Co, and the particle fractions <2.5, 2.5-10, 10-100 and >100 microm were included in the study. TSP samples were trapped on glass fibre filters using high volume samplers and quantification of metals was done using Atomic Absorption Spectrometry employing HNO(3) based wet digestion. At the urban site, Na was dominant at 2.384 microg/m(3) followed by K, Fe and Zn with 0.778, 0.667 and 0.567 microg/m(3) as mean concentrations, respectively. The metal levels for the rural site ranged from 0.002 microg/m(3) for Cd to 1.077 microg/m(3) for Na. However, compared with the urban site, mean Pb concentration showed an almost two-fold enhancement, i.e., 0.163 Vs. 0.327 microg/m(3). Metals and particle size source identification was done using Principal Component Analysis and Cluster Analysis. Five sources were traced out for the urban site: industrial, soil, automobile emissions, metallurgical industries and excavation activities. For the rural site, four sources were recorded: agricultural, automotive emissions, excavation activities and metallurgical units. Collectively, for both the sites, PM(10-100) emerged as a major contributor to TSP, followed by PM(2.5-10), PM(<2.5) and PM(>100) in that order. The metals showed in general positive relationship with fine particulate fractions (PM(2.5-10), PM(<2.5)), and negative correlation with coarse fractions (PM(10-100), PM(>100)). Comparison with the corresponding data from various Asian sites revealed that the levels of Na, K, Fe, Mn, Co and Ni for the present study were lower than those reported for grossly polluted cities of the world.     

Granulometric and Metal Distributions for Post‐Katrina Surficial Particulate Matter Recovered From New Orleans1

Bhadha, Jehangir H., Casey Schmidt, Robert Rooney, Paul Indeglia, Ruben Kertesz, Elizabeth Bevc, and John Sansalone, 2009. Granulometric and Metal Distributions for Post‐Katrina Surficial Particulate Matter Recovered From New Orleans. Journal of the American Water Resources Association (JAWRA) 45(6):1434‐1447. Abstract: Hurricane Katrina and the resulting failure of the levees that surrounded and protected New Orleans generated a significant detained volume of stormwater within the urban area of New Orleans. Between the inundation resulting from levee failure and eventual pumped evacuation of stormwater from the urban area of New Orleans, a large mass of storm‐entrained particulate matter (PM) was deposited in the inundated areas. This study examined the granulometry and granulometric distribution of metals for post‐Katrina surficial PM deposits recovered from 15 sites (10 inundated and 5 non‐inundated) in New Orleans. Results of this examination were compared to pre‐Katrina data from New Orleans. While post‐Katrina analysis of PM indicates that Pb, Zn, and Cu concentrations for PM are reduced for all sites, inundated sites had higher Cu, Pb, and Zn concentrations for the settleable (～25‐75 μm) and sediment (>75 μm) size fractions. A comparison between total metal concentration and the bioavailable (leachable) fraction for PM reveals that inundated sites had up to 19% higher leachable metal concentration compared to non‐inundated sites. The reduction in PM‐bound total metal concentrations for recovered PM can be explained through a combination of scouring (and therefore change in granulometry from pre‐Katrina) that resulted from transport of suspended PM by storm flows and pumped evacuation; as well as leaching and PM‐based redistribution from extended contact with rainfall and during stormwater detention. New Orleans has been exposed to elevated levels of metals through decades of activities that include vehicular transportation, chemical, industrial, and oil production facilities resulting in higher metal concentrations for urban soil‐residual complexes. As a result, the influent storm flows associated with Katrina as an episodic event cannot solely explain the distribution and fate of PM‐associated metal concentrations.     

Determining contamination level of heavy metals in road dust from busy traffic areas with different characteristics

This study identified the levels and sources of heavy metal contamination in road dust from busy traffic areas in a typical industrial city in Korea. This study compared the total concentrations, as determined by aqua regia digestions and atomic absorption spectroscopy, of cadmium (Cd), copper (Cu), lead (Pb), zinc (Zn) and nickel (Ni) in the road dust from areas with different characteristics such as traffic rotaries, downtown areas, circulation roads, and asphalt and concrete highways. The contamination levels of the heavy metals in the road dust were evaluated using the contamination factor and the degree of contamination. The contamination levels of the heavy metals in the road dust were highly dependent on traffic volume and atmospheric dispersion from traffic rotaries. Industrial emissions and the frequency of brake use and vehicles coming to a complete stop were additional factors that affected the contamination levels in downtown areas. The concrete highway had higher contamination levels of the heavy metals than the asphalt highway. Vehicle speed was also a strong contributing factor to the degree of contamination of heavy metals in the road dust from the circulation roads and highways.     

Use of constructed wetland for the removal of heavy metals from industrial wastewater

This study was conducted to investigate the effectiveness of a continuous free surface flow wetland for removal of heavy metals from industrial wastewater, in Gadoon Amazai Industrial Estate (GAIE), Swabi, Pakistan. Industrial wastewater samples were collected from the in-let, out-let and all cells of the constructed wetland (CW) and analyzed for heavy metals such as lead (Pb), cadmium (Cd), iron (Fe), nickel (Ni), chromium (Cr) and copper (Cu) using standard methods. Similarly, samples of aquatic macrophytes and sediments were also analyzed for selected heavy metals. Results indicate that the removal efficiencies of the CW for Pb, Cd, Fe, Ni, Cr, and Cu were 50%, 91.9%, 74.1%, 40.9%, 89%, and 48.3%, respectively. Furthermore, the performance of the CW was efficient enough to remove the heavy metals, particularly Cd, Fe, and Cu, from the industrial wastewater fed to it. However, it is suggested that the metal removal efficiency of the CW can be further enhanced by using proper management of vegetation and area expansion of the present CW.     

Assessment of heavy metal pollutants accumulation in the Tisza river sediments

In this study we have worked on the evaluation of heavy metal contamination in the sediments taken from the Tisza River and its tributaries, and thereby used the sequential extraction method, geochemical normalization, the calculation of the enrichment factor (EF), and the methods of statistical analysis. The chemical fractionation of Ni, Cu, Zn, Cr, Pb, Fe, and Mn, carried out by using the modified Tessier method, points to different substrates and binding mechanisms of Cu, Zn and Pb in sediments of the tributaries and sediments of the Tisza River. The similarities in the distributions of Fe and Ni in all types of sediments are the result of geochemical similarity as well as of the fact that natural sources mainly affect the concentration levels of these elements. The calculated enrichment factors (EF, measured metal vs. background concentrations) indicated that metal contamination (Cu, Pb, Zn and Cr) was recorded in the sediments of the Tisza River, while no indications of pollution were detected in the tributaries of the Tisza River and the surrounding pools. The maximum values of the EF were close to 6 for Cu and Pb (moderately severe enrichment) and close to 4.5 for Zn (indicating moderate enrichment). It can be said that the Tisza River is slightly to moderately severely polluted with Cu, Zn, and Pb, and minorly polluted with Cr. It is concluded that sediments of the Tisza serve as a repository for heavy metal accumulation from adjacent urban and industrial areas.     

Assessment of tropical suburban surface soils contamination from Jengka,Malaysia

Heavy metals in suburban soils pose both indirect and direct health risks. This study assessed the concentrations of Cr, Zn, Pb, and Cd in Jengka (Malaysia) suburban soil and estimated the human health risk. Health risk assessment (HRA) was utilized to assess non-cancer and cancer risks. The concentrations of heavy metals increased in the following order: Cd < Zn < Cr < Pb. The heavy metals were found to be divided into two components using principal component analysis (PCA), with PC1 comprising Pb and Cd and PC2 containing Zn and Cr. PC1 originates from anthropogenic sources, while PC2 is often from mixed anthropogenic and natural sources. Despite having the lowest mean concentration, Cd was enriched based on the geo-accumulation index (Igeo) and enrichment factor (EF). Average hazard index values were below the acceptable threshold (HI < 1) for dermal and inhalation pathways suggesting a low non-cancer risk. Jengka suburban soil had total lifetime cancer risk values slightly higher than the acceptable threshold (1 × 10⁻⁵). Skin contact was the most prominent contributing exposure pathway for both non-carcinogenic and carcinogenic risks. This study suggests that heavy metal bioactivity levels be used to make a plausible HRA of heavy metal pollution in suburban soils.     

Groundwater characterization in major industrial and residential locations of Lagos metropolis

This study investigated the quality of groundwater collected from two industrial and residential locations, each within the Lagos metropolis. Prescribed standard procedures of the American Public Health Association (APHA) were used to measure the physicochemical parameters of each of the groundwater samples, which include pH, electrical conductivity (EC), dissolved oxygen, total dissolved solids (TDS), biological oxygen demand, chemical oxygen demand; the anions chloride (Cl^?), nitrate (NO₃^?), sulfate (SO₄^?), and phosphate (PO₄^?); and heavy metals copper (Cu), zinc (Zn), lead (Pb), manganese (Mn), iron (Fe), cobalt (Co), cadmium (Cd), and chromium (Cr). Based on the laboratory analysis, the physicochemical parameters that were measured were within the permissible ranges specified by the World Health Organization and the Nigerian Standard for Drinking Water Quality Standards Organization of Nigeria (SON), except for pH, TDS, EC, Pb, Mn, and Fe for groundwater samples from the industrial locations and for pH, Pb, Mn, and Fe for residential locations. The elevated concentrations of TDS and EC reported for groundwater samples from industrial locations were attributed to the heavy discharge of effluents from nearby industrial treatment plants as well as the dissolution of ionic heavy metals from industrial activities involving the use of heavy machines. Statistical analysis using Pearson's correlation revealed the physicochemical parameters to be moderately and strongly correlated with one another at either p < .05 or < .01. In conclusion, groundwater samples from residential locations are more suitable for drinking than those from industrial locations.     

Analysis of heavy metals and aromatics compounds in soil layers of a sanitary landfill

Solid waste presents the potential for contamination of the soil when it is improperly managed. One of the great challenges of today's society is to promote the proper disposal of municipal solid waste in order to guarantee the safety of public health and to avoid risks to the environment. In this context, the objective of this study is to analyze the concentration profiles of heavy metals and aromatic hydrocarbons of risk that human health in landfill soil. Such works provides an important tool to evaluate the possible presence of contaminants from inappropriate waste disposal, as well as to assist in the management of waste and to prevent environmental contamination. In order to analyze cadmium (Cd), lead (Pb), nickel (Ni), arsenic (As), and mercury (Hg), which are toxic elements, and aromatic hydrocarbons, including benzene, toluene, ethylbenzene, o‐xylene, m‐xylene, and p‐xylene, soil samples were collected at different sites and depths. Neither Cd nor As was detected in any of the samples that were analyzed. Pb levels ranged from 5.34 milligrams per kilograms (mg/kg) to 7.40 mg/kg, Ni levels ranged from 2.17 mg/kg to 3.00 mg/kg, and Hg levels ranged from 75.4 micrograms per kilograms (μg/kg) to 88.3 μg/kg. The aromatic hydrocarbon compounds of benzene, toluene, ethylbenzene, and o‐xylene were below 5.5 μg/kg, and m‐, p‐xylene was below 11 μg/kg. The analysis of heavy metals and aromatic hydrocarbons present in the landfill soil showed concentrations below the soil quality guideline values of the Brazilian National Environment Council (CONAMA) Resolution 420, which has criteria for the presence of chemical substances in soil for Brazil. Therefore, the low levels of chemicals may be related to the operational time of the landfill or to the population profile of the municipality, which is predominantly composed of persons involved in family‐based agriculture.     

Simple estimates of vehicle-induced resuspension rates

Road dust emissions are considered to be a major source of airborne particulate matter (PM). This is particularly true for industrial environments, where there are high resuspension rates of deposited dust. The calculation of roads as PM emission sources has mostly focused on the consequences of this emission, viz. the increase in PM concentrations. That approach addresses the atmospheric transport of the emitted dust, and not its primary origin. In contrast, this paper examines the causes of the emission. The study is based on mass conservation of the dust deposited on the road surface. On the basis of this premise, estimates of emission rates were calculated from experimental data obtained in a road in a ceramic industrial area.     

“第一类污染物”防治需求的紧迫性及其对策措施

"第一类污染物"是指会对人体健康产生长远不良影响的污染物,包括8种重金属和类金属。已经证实,工业源重金属超量排放严重,使水土及生态环境遭受到"第一类污染物"的严重污染,面临的"第一类污染物"防治形势更加紧迫。本文在重金属污染现状与治理需求分析的基础上,通过长期调研,针对重点行业提出了6项综合防治措施,建议从源头严格控制排放总量,对重点企业进行监管与治理,总结与创新重金属修复新技术等,旨在推动第一类污染物的污染防治。     

铁尾矿路用对土壤环境质量影响及安全修复研究

为分析铁尾矿路用对道路沿线土壤环境质量影响的程度,对铁尾矿化学成分及有害物质进行测定,以秦巴山区的山地黄棕壤作为道路建设的耕土环境,把铁尾矿按70%~90%的推荐比例掺入,铁尾矿中的重金属按照最不利的全浸入式扩散进行分析,对黄棕壤中重金属含量超过限制要求的重金属进行安全修复,使铁尾矿道路沿线黄棕壤的重金属含量满足限制要求。结果表明:铁尾矿硫化物含量高达到2.89%,不满足配制混凝土的硫化物限量要求;铁尾矿路用的土壤中重金属Cr最大含量103.24 mg/kg、Cu最大含量116.4 mg/kg,国评标准污染等级均为Ⅱ级,其余重金属元素含量都在国家标准正常范围以内;高生物量的非超富集植物、细菌微生物、城市的污泥、工业粉煤灰(5%粉煤灰+50%尾矿砂+45%黄褐土)能够很好修复重金属Cr、Cu污染的土壤;含钙类物质的钝化剂处置重金属Cr、Cu污染效果好,腐殖酸、凹凸棒土、膨润土可以钝化土壤中的重金属Cu;高生物量非超富集植物、微生物钝化剂联合使用,具有更好的修复效果;当控制铁尾矿掺加比例不超过73%时,铁尾矿道路沿线的土壤重金属含量能够满足国家标准限值的要求。     

Heavy metals in an urban watershed in southeastern Michigan

The occurrence of heavy metals in the soil was measured over a period of several years to determine background concentrations in a heavily urbanized watershed in southeastern Michigan. A spatially dispersed sample was collected to capture the inherent variability of the soils and historic land use. The analysis focused on 14 metals (antimony, arsenic, barium, beryllium, cadmium, chromium, copper, lead, mercury, nickel, selenium, silver, thallium, and zinc) that are part of the USEPA's list of the 129 most common pollutants. Metal concentrations were measured at three depths: near-surface (<0.5 m), shallow subsurface (0.5-10 m), and depths greater than 10 m across six soil units in glacial terrain. Additional analyses assessed the metal concentrations in each depth profile across three general land use categories: residential, commercial, and industrial. Metal concentrations were the highest in the near-surface with Pb present at concentrations averaging 15.5 times that of background in industrial areas and approximately 16 times background in residential areas. Cadmium, Hg, and Zn were also present in surface soils at levels of several times that of background. The highest concentrations of each of these metals were present in the clay-rich soils located in the eastern, more urbanized and industrialized part of the watershed. Metals detected at elevated concentrations decreased in concentration with increasing depth and distance from the urbanized and industrialized center of the watershed. Statistically significant differences in the concentrations of heavy metals were also noted between the land use categories, with Cd, Cr, Cu, Pb, Ni, and Zn observed within industrial areas at mean concentrations several times greater than background levels.     

长沙市城区典型交通路口PM_(10)和PM_(2.5)污染特征研究

利用车载环境空气质量监测系统对长沙市城区典型交通路口的近地面空气质量进行了实时监测。结果表明,在监测时段(14∶00~20∶00)内,该监测点环境空气中PM10的小时质量浓度范围在0.097~0.222mg/m3之间,平均值0.163mg/m3;PM2.5的小时质量浓度范围在0.050~0.158mg/m3之间,平均值0.103mg/m3。PM2.5/PM10比值在48.1%~76.6%之间,平均值62.4%。PM10与PM2.5质量浓度在星期一相对较低,星期二有所升高,星期三至周末总体上保持基本稳定。在监测时段PM10与PM2.5小时质量浓度呈现先降后升的变化规律,即14∶00~15∶00,PM10与PM2.5质量浓度相对较高,16∶00左右降至最低,从17∶00开始逐渐升高,20∶00达到峰值。PM10和PM2.5的质量浓度变化与车流量和车速密切相关,温度、相对湿度和风速等气象因素对PM10和PM2.5质量浓度的变化影响也较显著。     

Assessment and management of air quality for an opencast coal mining area

A study for the assessment and management of the air quality was carried out at Lakhanpur area of Ib Valley Coalfield in Orissa state in India. The 24-h average concentrations of total suspended particulate (TSP) matter, respirable particulate matter (PM10), sulphur dioxide (SO2) and oxides of nitrogen (NOx) were monitored during 1 year period. Samplings were done at a regular interval through out the year at 13 monitoring stations in the residential areas and four monitoring stations in the mining/industrial areas. The 24-hr average TSP and PM10 concentrations ranged from 338.8 to 799.8 microg m(-3) and 102.5-425.6 microg m(-3) for industrial area, and 72.3-497.1 microg m(-3) and 40.8-171.9 microg m(-3) for residential area, respectively. During the study period 24-hr and annual average TSP and PM10 concentrations exceeded the respective standards set in the national ambient air quality standard (NAAQS) protocol at most residential and industrial areas. However, 24-hr and annual average concentrations of SO2 and NOx were well within the prescribed limit of NAAQS both in the residential and industrial areas. The annual and 24-hr average concentrations varied from 23.3 to 36.8 microg m(-3) and 16.0-55.2 microg m(-3) for SO2 and 23.9-41.9 microg m(-3) and 19.0-58.1 microg m(-3) for NOx, respectively. The temporal variations of TSP and PM10 fitted polynomial trend with an average correlation coefficient (R2) of 0.77 (+/-0.17) for TSP and 0.85 (+/-0.10) for PM10. On average the PM10 in the ambient air of the mining area constituted 31.94 (+/-1.76)% of the TSP. The linear regression correlation coefficient (R2) between TSP with PM10 and NOx with SO2 was 0.86 (+/-0.12) and 0.57 (+/-0.20), respectively. Maximal concentrations of TSP and PM10 occurred within the mining site based on the kriging technique. A management strategy is formulated for effective control of air pollution at source and other mitigative measures recommended including implementation of green belts around the sensitive areas where the concentration of air pollutants exceeded the standard limit.     

Transport of particulate matter fractions in urban source area pavement surface runoff

This study used manual full cross-sectional flow discrete sampling and suspended sediment concentration (SSC) methods to gravimetrically characterize noncolloidal hetero-disperse particulate matter (PM). This PM was examined as suspended, settleable, and sediment fractions to assess the distinct transport behavior of each PM fraction throughout each runoff event. Eight runoff events loading an urban paved source area watershed were examined to characterize transport of PM (as SSC) and fractions thereof. An event-based PM mass balance demonstrated recoveries exceeding 90%. With respect to PM transport, two phases were differentiated using a first flush index (m = DeltaM/DeltaV) developed in this study. The m >/= 1 and m < 1 transport phases of the coarser settleable/sediment PM accounted for a higher mass fraction of PM transported during higher flow rates, whereas delivery of the finer suspended fraction became more significant at lower flows. A positive relationship between PM concentration and particle size distribution was found for all events. Event mean concentrations (EMCs) of PM (as SSC) were compared with literature EMCs, sampling methods, and PM analysis method (as total suspended solids [TSS]). Particulate matter study results (as SSC) were higher than many published EMCs (as TSS) (p < 0.05). Differences are attributed to full cross-sectional flow sampling and the use of the the SSC method in contrast to automated sampling combined with TSS methods. Representative characterization of hetero-disperse source area PM is important for water chemistry monitoring, regulatory decisions, best management practice performance and maintenance, and PM inventories in urban systems.     

金昌市环境中铜的来源调查分析

大多数重金属通常是以气溶胶形式,如以烟、雾、尘分散在大气中.悬浮颗粒物中重金属是重要的大气污染物之一,目前已证实颗粒物中重金属如Ni、Cu、Cd、As等不但对人体具有毒害,而且具有致癌作用.金昌市是以硫化型金属矿为原料生产镍、铜的工业城市.因总体产业格局基本为原材料初级加工,能耗物耗高,原工艺水平低,环保欠帐较多,工业污染源超标排放污染物普遍,区域性环境污染相对突出.根据金昌市大气污染现状,通过对环境空气、土壤、植物中的重金属铜进行布点采样及分析,找出了重金属铜的污染分布特征以及来源.     

Surface water quality and its control in a river with intensive human impacts–a case study of the Xiangjiang River,China

Surface water quality and its natural and anthropogenic controls in the Xiangjiang River were investigated using multivariate statistical approaches and a comprehensive observation dataset collected from 2004 to 2008. Cluster analysis (CA) grouped the 15 different sampling stations into five clusters with similar hydrochemistry characteristics and pollution levels. Four principal components (PCs), nutrients, heavy metals, natural components, and organic components, were extracted from the entire dataset. Comparison of the different regional characteristics of these four PCs revealed a decreasing trend for heavy metals and an increasing trend for organic factor on an annual scale, and the seasonal trend was only observed for natural factor. We also conducted analysis of variance (ANOVA) in combination with principal component analysis (PCA) to quantify the relative contribution of spatial and temporal variations to each of the four PCs. The results revealed that 62% of the contributions from the spatial sites were responsible for variations in heavy metals, while 83% of the contributions from the sampling time were responsible for natural variations observed. However, no significant spatial or temporal contributions were found to be responsible for the nutrient and organic variations. Finally, some suggestions regarding water management were put forward based on the current status and future trends of surface water quality in the Xiangjiang River.     

2020年第一季度枣庄市PM2.5源解析的分析研究

为了评估分析枣庄市不同来源污染物排放强度削减与大气环境质量变化之间的关系,使用统计方法和正定矩阵因子分解法对枣庄市2020年第一季度大气污染变化特征和污染来源进行了解析,探究了枣庄市大气固体悬浮微粒浓度变化影响机制。结果表明:2020年第一季度PM2.5、PM10、NO2、SO2浓度较2019年同期显著下降,但枣庄市采暖季内社会活动造成的正常排放仍高于大气环境容量;受新冠疫情影响,2020年较2019年PM2.5源因子浓度削减最大的为机动车源(46.5%)和工业源(17.9%),应长期采取机动车减排、产业结构调整等措施,科学规划“十四五”大气污染防治。     

Experimental investigation of adsorption capacity of anthill in the removal of heavy metals from aqueous solution

In the present work, the adsorption capacity of anthill was investigated as a low‐cost adsorbent to remove the heavy metal ions, lead (II) ion (Pb²⁺), and zinc (II) ion (Zn²⁺) from an aqueous solution. The equilibrium adsorption isotherms of the heavy metal ions were investigated under batch process. For the study we examined the effect of the solution's pH and the initial cations concentrations on the adsorption process under a fixed contact time and temperature. The anthill sample was characterized using a scanning electron microscope (SEM), X‐ray fluorescence (XRF), and Fourier transform infrared (FTIR) techniques. From the SEM analysis, structural change in the adsorbent was a result of heavy metals adsorption. Based on the XRF analysis, the main composition of the anthill sample was silica (SiO₂), alumina (Al₂O₃), and zirconia (ZrO₂). The change in the peaks of the spectra before and after adsorption indicated that there was active participation of surface functional groups during the adsorption process. The experimental data obtained were analyzed using 2‐ and 3‐parameter isotherm models. The isotherm data fitted very well to the 3‐parameter Radke–Prausnitz model. It was noted that Pb²⁺ and Zn²⁺ can be effectively removed from aqueous solution using anthill as an adsorbent.