Technological trends in nanosilica synthesis and utilization in advanced treatment of water and wastewater

Environmental Science and Pollution Research - Water and wastewater treatment applications stand to benefit immensely from the design and development of new materials based on silica nanoparticles...     

Experimental investigation of adsorption capacity of anthill in the removal of heavy metals from aqueous solution

In the present work, the adsorption capacity of anthill was investigated as a low‐cost adsorbent to remove the heavy metal ions, lead (II) ion (Pb²⁺), and zinc (II) ion (Zn²⁺) from an aqueous solution. The equilibrium adsorption isotherms of the heavy metal ions were investigated under batch process. For the study we examined the effect of the solution's pH and the initial cations concentrations on the adsorption process under a fixed contact time and temperature. The anthill sample was characterized using a scanning electron microscope (SEM), X‐ray fluorescence (XRF), and Fourier transform infrared (FTIR) techniques. From the SEM analysis, structural change in the adsorbent was a result of heavy metals adsorption. Based on the XRF analysis, the main composition of the anthill sample was silica (SiO₂), alumina (Al₂O₃), and zirconia (ZrO₂). The change in the peaks of the spectra before and after adsorption indicated that there was active participation of surface functional groups during the adsorption process. The experimental data obtained were analyzed using 2‐ and 3‐parameter isotherm models. The isotherm data fitted very well to the 3‐parameter Radke–Prausnitz model. It was noted that Pb²⁺ and Zn²⁺ can be effectively removed from aqueous solution using anthill as an adsorbent.     

Carbon dioxide sequestration of iron ore mining waste under low-reaction condition of a direct mineral carbonation process

Environmental Science and Pollution Research - Mining waste that is rich in iron-, calcium- and magnesium-bearing minerals can be a potential feedstock for sequestering CO2 by mineral carbonation....     

Quantitative analyses of selected polychlorinated biphenyl (PCB) congeners in water,soil, and sediment during winter and spring seasons from Msunduzi River,South Africa

The lack of information and the need for knowledge on the organic pollutants within the area of KwaZulu-Natal together with the global problem of water supply have prompted our investigation into the analyses of eight polychlorinated biphenyl (PCB) congeners in the Msunduzi River of KwaZulu-Natal, South Africa. Soil, sediment, and water samples were collected at ten different sites along the river during winter and spring seasons. Soil and sediment samples were extracted using ultra sonication with dichloromethane while water samples were liquid-liquid extracted using dichloromethane. All sample extracts were cleaned-up using a multi-layer silica gel column and analyzed with gas chromatography-mass spectrometry. Quality assurance measures were also determined. The percentage recoveries for water were 53–128 for all the PCBs analyzed, while sediment recoveries ranged between 69 and 105%. The highest total concentrations of the PCBs in sediment were 214.21–610.45 ng/g dw at the Du Toit sampling site and 30.86–444.43 ng/g dw basis at the wastewater treatment inlet for winter and spring, respectively. Soil PCB concentrations were 76.53–397.75 ng/g dw at the Msunduzi Town sampling site and 20.84–443.49 ng/g (dry weight) at the Du Toit sampling site for winter and spring, respectively. In addition, high PCB concentrations were found in effluent of the wastewater treatment inlet compared to other sampling sites, which ranged between 0.68–22.37 and 2.53–35.69 ng/mL for winter and spring seasons, respectively. In all the sampling sites selected for this study, Du Toit afforded the highest PCB concentration levels and the lowest was after chlorination at the Darvill wastewater treatment plant. The results presented are new and it is the first study of organic pollutants such as PCBs that has been carried out on this river.     

Removal of copper from water using limestone filtration technique. Determination of mechanism of removal

This paper discusses heavy metal removal from wastewater by batch study and filtration technique through low-cost coarse media. Batch study has indicated that more than 90% copper (Cu) with concentration up to 50 mg/l could be removed from the solution with limestone quantity above 20 ml (equivalent to 56 g), which indicates the importance of limestone media in the removal process. This indicates that the removal of Cu is influenced by the media and not solely by the pH. Batch experiments using limestone and activated carbon indicate that both limestone and activated carbon had similar metal-removal efficiency (about 95%). Results of the laboratory-scale filtration technique using limestone particles indicated that above 90% removal of Cu was achieved at retention time of 2.31 h, surface-loading rate of 4.07 m3/m2 per day and Cu loading of 0.02 kg/m3 per day. Analyses of the limestone media after filtration indicated that adsorption and absorption processes were among the mechanisms involved in the removal processes. This study indicated that limestone can be used as an alternative to replace activated carbon.     

Domestic energy usage and its' health implications on residents of the Ese‐Odo and Okitipupa local government areas of Ondo state,Nigeria

This study examined domestic energy usage and its health implication on residents of Ese‐Odo and Okitipupa Local Government Areas (LGA), of Ondo State. Systematic random sampling was used to select 103 and 156 respondents in Ese‐Odo and Okitipupa LGA, respectively. It was established that environmental and socio‐economic related attributes influenced residents' choice of domestic energy type. Similarly, burns, blindness, stroke, cataract and pulmonary diseases were the most prevalent self‐reported ill‐health. A relatively weak correlation between domestic energy usage and ill‐health is experienced by the residents. Therefore, the study concluded that the use of traditional energy types had significant adverse effects on the health of the residents in Okitipupa and Ese‐Odo LGAs of Ondo State.     

Impact of soil types and petroleum effluents on the earthworm, Eudrilus eugeniae

Earthworm, Eudrilus eugeniae, exposed to different concentrations of dump-site soil and petroleum effluents exhibited different morbidity and mortality responses. Lake sediments caused varied fluctuations in weight over a 20 day exposure period. Colour changes and mortality up to 15% were observed in earthworms cultured in 100% lake sediment, while weight loss, coiling and sluggish movement were observed in 50% lake water. The effects of 100% dump-site soils were more pronounced as 40% death, swelling, body lesions, stiffening, coiling and low reproduction were recorded. Earthworms were useful as an organism in testing the toxicity of dump-site soils and effluent from a petroleum industry. Dump-site soils and soils polluted with petroleum effluent reduced populations of earthworms and this could subsequently affect other components of the ecosystems associated with earthworm activities.     

Effect of Hydrogen Peroxide on Industrial Waste Water Effluents: A Case Study of Warri Refining and Petrochemical Industry

This paper assessed the composition of waste water effluent generated by a Petrochemical industry and a treatment system developed to improve the quality of the discharge water. Parameters as pH, COD, TSS chloride and lead ions were analysed and treated comparatively using hydrogen peroxide. At pH 8.0 post treatment analysis showed a COD – 96 mg/l TSS – 48 mg/l Cl – 798.75 mg/l and Pb²⁺ – 2 mg/l for treatment D where 40 g/l of alum was used on 30% solution of H₂O₂ compared to systems A-C. Process treatment included activated clay with sodium ion resin which at pH 6.8 had COD – 52 mg/l, TSS – 10 mg/l, Cl – 510 mg/l and Pb²⁺ – 0.070 mg/l. This system has an overall efficiency of 79.0% TSS, 45.83% COD, 97.5% Pb²⁺ and 36.1% Cl reduction. Characteristics obtained for the study has a higher efficiency compared with FEPA and WHO standard for similar industrial water treatment.