Free radical-assisted electrocoagulation processes for wastewater treatment

The combination of electrocoagulation with another process is a promising approach to enhance the removal efficiency of water pollutants. For instance, free radical-assisted electrocoagulation is a new combination showing higher performance. There are different combinations depending on the free radical source. This article reviews free radical-assisted electrocoagulation processes. We discuss electrocoagulation mechanisms; ozone-assisted electrocoagulation processes; advanced oxidation-assisted electrocoagulation processes; and ultrasound-assisted electrocoagulation. We present kinetic models used in free radical-assisted electrocoagulation, scale-up of free radical-assisted electrocoagulation and cost estimation. The major points are: most of the available studies have been done at laboratory scale with synthetic wastewater, and lack holistic and systematic approaches to consider the process complexity. The performance of the combined process is improved, and the removal efficiency is increased especially with ozone-assisted electrocoagulation, which gives a removal efficiency of more than 95%. The use of ultrasound energy with electrocoagulation is advantageous in reducing the problem of electrode passivation.     

Occupational Cognitive Failures and Safety Performance in the Workplace

Introduction. The majority of industrial accidents occur because of human errors. Human error has different causes, however, in all cases cognitive abilities and limitations of human play an important role. Occupational cognitive failures are cognitively-based human errors that occur at work. The aim of this study was to examine the relationship between occupational cognitive failures and safety consequences. Method. Personnel of a large industrial company in Iran filled out an occupational cognitive failure questionnaire (OCFQ) and answered questions on accidents. Univariate and multiple logistic regression analysis were used to determine the relationship between cognitive failures and safety consequences. Results. According to developed regression models, personnel with a high rate of cognitive failure, in comparison to low rate, have a high risk of minor injury involvement (OR 5.1, 95% CI [2.62, 10.3]); similar results were for major injury and near miss. Discussion. The results of this study revealed usefulness of the OCFQ as a tool of predicting safety-related consequences and planning preventive actions.     

Technological trends in nanosilica synthesis and utilization in advanced treatment of water and wastewater

Environmental Science and Pollution Research - Water and wastewater treatment applications stand to benefit immensely from the design and development of new materials based on silica nanoparticles...     

Hand-arm vibration disorder among grass-cutter workers in Malaysia

Introduction. Prolonged exposure to hand-transmitted vibration from grass-cutting machines has been associated with increasing occurrences of symptoms and signs of occupational diseases related to hand–arm vibration syndrome (HAVS). Methods. A cross-sectional study was carried out using an adopted HAVS questionnaire on hand–arm vibration exposure and symptoms distributed to 168 male workers from the grass and turf maintenance industry who use hand-held grass-cutting machines as part of their work. The prevalence ratio and symptom correlation to HAVS between high and low–moderate exposure risk groups were evaluated. Results. There were positive HAVS symptoms relationships between the low–moderate exposure group and the high exposure group among hand-held grass-cutting workers. The prevalence ratio was considered high because there were indicators that fingers turned white and felt numb, 3.63, 95% CI [1.41, 9.39] and 4.24, 95% CI [2.18, 8.27], respectively. Less than 14.3% of workers stated that they were aware of the occupational hand–arm vibration, and it seemed to be related to the finger blanching and numbness. Conclusion. The results suggest that HAVS is under-diagnosed in Malaysia, especially in the agricultural sectors. More information related to safety and health awareness programmes for HAVS exposure is required among hand-held grass-cutting workers.     

Reuse of Selected Lignocellulosic and Processed Biomasses as Sustainable Sources for the Fabrication of Nanocellulose via Ni(II)-Catalyzed Hydrolysis Approach: A Comparative Study

This study investigates for the first time the feasibility of isolating nanocellulose from several selected feedstocks via a novel Ni(II)-hydrolysis process, including lignocellulosic biomasses (oil palm trunk, banana peel and coconut husk) and processed biomasses (newspaper, tissue paper and cotton linter), with an obtained gravimetric yield ranging from 59.6 to 86.2%. The isolation of nanocellulose products from these selected feedstocks was verified by the successive removal of most of their non-cellulosic components (lignin and hemicellulose) and cellulose amorphous regions, the increase in the crystallinity index and the nanoscale of the individual crystals. Most importantly, the resultant nanocellulose products rendered better thermal stability than that of corresponding original sources, which are highly potential to be utilized as the new renewable sources of reinforcement materials with potential applications in bio-nanocomposites and thermoplastics. Therefore, this work proves the viability of direct production of nanocellulose from a variety of cellulosic sources by using Ni(II)-based transition metal salt catalyst. The results suggested that the concept of waste to wealth could be well executed from the obtained nanocellulose, which are greatly potential for various industrial applications.     

Preparation of Liquid Epoxidized Natural Rubber by Oxidative Degradations Using Periodic Acid,Potassium Permanganate and UV-Irradiation

Epoxidized natural rubber (ENR) needs to be degraded into shorter chain lengths, to form liquid epoxidized natural rubber (LENR), for applications such as coating and adhesives. Since ENR contains both C=C and epoxide groups as reactive sites for degradation reactions, thus, LENR could be prepared by different methods through cleavages of C=C or epoxide groups, or a combination of both sites. Different mechanisms would produce different terminals on the LENR. This paper reports the oxidative degradation by (a) periodic acid, (b) potassium permanganate and (c) ultra violet (UV) irradiation. The degraded rubbers were characterized by gel permeation chromatography (GPC), nuclear magnetic resonance (NMR) and Fourier transform infra-red spectroscopy (FTIR). Ester and ketone terminals were formed in all the three methods, but lactone and hydrofuranic structures were observed only in degradation by UV irradiation. NMR spectrum reveals that cyclization of ENR has occurred during degradation by periodic acid. At lower periodic acid concentration, degradation takes place only via C=C cleavage, but at higher concentration, the attack to the epoxide groups becomes more prominent. Potassium permanganate has attacked both the double bonds and epoxide groups. On the other hands, epoxide group was not affected during degradation by UV irradiation, which cleaved only the C=C bonds.     

Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.     

Physico-chemical characteristics of fine fraction materials from an old crystal glass dumpsite in Sweden

Physico-chemical characteristics of waste, particularly fine fraction (FF), from an old crystal glass waste dump in Sweden were studied to assess recycling or disposal alternatives. Hand-sorting of the waste indicated glass content of 44.1% while sieving established the FF as a more soil-like mix of glass and other materials constituting 33.3% of all excavated waste. The FF was around neutral pH with 24.4% moisture content, low values of Total Dissolved Solids, Dissolved Organic Carbon and fluorides, but hazardous concentrations of As, Cd, Pb and Zn according to the Swedish Environmental Protection Agency guidelines. While the FF leached metals in low concentrations at neutral pH, it leached considerably during digestion with nitric acid, implying leaching risks at low pH. Thus, the waste requires safe storage in hazardous waste class ‘bank account’ storage cells to avoid environmental contamination as metal recovery and other recycling strategies for the glass waste are being developed. The study could fill the information gap regarding preservation of potential resources in the on-going, fast-paced excavation and re-landfilling of heavy metal contaminated materials in the region.     

Metals in agricultural soils and plants in Egypt

Since analysis of both soil and plants are useful to assess contamination of a geographic area, concentrations of five representative metals: copper (Cu), zinc (Zn), cadmium (Cd), lead (Pb), and iron (Fe) in soil and associated plants were measured by atomic absorption spectroscopy. Samples were collected from four different Egyptian regions (El-mehala El-kobra, Kafr El-Sheikh, Kafr El-zayat, and Al-fayoum) during spring and summer 2010. Concentrations of the selected metals in agricultural soils were significantly different among locations and seasons. Concentrations of Cd and Fe in soils at the four locations exceeded the maximum allowable concentrations for Cd (8 mg/kg, dry mass (dm)) and Fe (1000 mg/kg, dm). Accumulation was different for clover and cotton. Clover blossoms grown in soil from Kafr El-zayat contained the greatest concentrations of Cu, Zn, Pb, and Fe. Cotton flowers from El-mehala El-kobra accumulated the highest levels of Cd. Concentrations of Cd and Pb in both clover and cotton flowers from the four locations exceeded maximum allowable concentrations (3 mg/kg, dm) for both Cd and Pb. Using such agricultural soils for cultivation of edible crops for consumption may result in chronic hazards to human health.