长沙市城区施工扬尘和土壤扬尘污染时空特征研究

随着我国城市化的迅速发展,大气污染问题成为影响人们生活幸福感的重要因素之一。施工、裸露地面等引起的扬尘成为城市大气颗粒物污染的主要来源。将GIS方法和原环保部《扬尘源颗粒物排放清单编制技术指南(试行)》推荐的计算方法相结合,估算出2016—2018年长沙市城区施工扬尘源、土壤扬尘源的颗粒物排放量,从时空分布特征与空间自相关等多个方面剖析了扬尘源的颗粒物排放情况。结果表明:长沙市扬尘源沿中心城区向西、北方向辐射,呈现出半圆环形的带状分布,以城乡接合部最为集中；2016—2018年,长沙市城区扬尘源排放量总体呈现逐年递减的变化趋势。研究结果与长沙市城区实际情况基本相符,可为长沙市扬尘污染控制策略的制定提供参考。     

天津市开放源可吸入颗粒物污染问题分析

通过高斯面源反演的计算方法对天津市扬尘污染源进行反演计算,建立开放源可吸入颗粒物污染源强数据库,系统分析了城市扬尘污染问题。数值试验模拟结果表明,扬尘控制措施与环境质量呈现很好的线性相关关系,通过模拟2004年天津市建筑施工扬尘对城市可吸入颗粒物污染贡献,提出扬尘污染问题解决方案。     

关于开征建筑施工扬尘排污费可行性的思考

针对城市场尘污染日益加重的现状，提出对城市扬尘的主要贡献者——建筑施工行业开征扬尘排污费，力图将经济手段纳入到城市扬尘污染控制的管理措施之中．文章并结合相关行业的物料衡算方法，提出了扬尘排污费的具体核算公式．     

北京市建筑施工裸地的空间分布及扬尘效应

北京市作为中国典型的快速城市化大城市之一,大规模的城市建设使得城市内部存在大量的建筑施工裸地,工地扬尘效应造成了严重的大气颗粒物污染。以北京市平原区为研究区,首先利用高分辨率卫星数据反演了建筑施工裸地的空间分布格局,在此基础上,结合建筑施工裸地的扬尘排放因子,在空间上定量分析建筑施工裸地的扬尘效应。结果显示,2012年全市平原区建筑施工裸地总面积为140.77 km2,主要分布在城市核心区向外拓展的城乡过渡带。建筑施工裸地的扬尘效应分析中发现北京市平原区建筑施工裸地中TSP、PM10和PM2.5的排放量分别是31.53、16.66、9.16万吨,并且这些污染物的排放量在城市发展新区与功能拓展区中较高,生态涵养发展区较小。以北京市的建筑施工裸地为例,示范了以遥感为技术手段结合污染排放因子的城市内部典型面源污染的监测和污染排放定量化,为今后面源污染的快速准确监测开辟了新的研究思路。     

南京市建筑扬尘排放清单研究

统计分析了2010年南京市各行政区建筑场地面积和工期，结合扬尘排放因子，建立了南京市建筑扬尘排放清单。研究表明，2010年南京市建筑扬尘TSP、PM10和PM2．5的排放量分别达2．53万t、1．40万t和0．95万t，占工业烟（粉）尘排放量的23％、13％和8．6％。郊区县建筑扬尘排放量较大，约占全市 TSP、PM10、PM2．5排放总量的72％；主城区排放强度较高。对不同建筑工程类型扬尘排放量估算表明，城市建设工程和市政工程是建筑扬尘的主要来源，城市建设工程中又以住宅类建设工程为主。对不同研究获得的建筑扬尘结果比较，发现扬尘排放因子选择和污染源活动水平统计是影响建筑扬尘结果的关键因素。     

光散射法扬尘在线监测质量管理研究与应用

主要阐述了光散射法扬尘在线监测应用于建筑工地、干散货码头堆场、混凝土搅拌站的质量管理和质量评估。为了提高光散射法扬尘在线监测的数据质量,上海市采取扬尘在线监测设备现场质量抽测的模式,通过对在用仪器的监测点位、除湿方式、校准方式、质量浓度转换系数、与标准重量法监测结果的相对误差和相关系数、仪器运行维护水平等影响监测质量和数据有效性的关键指标的检查,开展扬尘监测在用仪器质量评估和仪器商合格评定,稳步提高在用仪器质量,为在线监测质量管理和质量评估提供可借鉴的技术方案和实践经验。     

考虑道路扬尘特性的环境空气质量在线监测方法

为判断环境空气污染的程度,提出一种考虑道路扬尘特性的环境空气质量在线监测方法。通过前端数据监测模块采集大气环境数据,基于光全散射法监测道路扬尘的质量浓度和密度;通过监测通信模块将监测结果传送至云服务器;云服务器利用基于极限学习机神经网络的预测模型,采用自适应粒子群优化算法,获取最佳的环境空气质量在线监测结果。结果表明,该方法学习速率的取值为0.5时,能够完成颗粒物浓度和密度的准确检测,且解释方差<2%,同时能够监测扬尘颗粒的扩散时间,确定适合活动的区域。     

省级高空间分辨率扬尘源排放清单研究

通过对浙江省统一开展部署和行动，现场调查收集全省7 507个施工工地、3 923个堆场以及不同等级公路和城市道路的真实活动水平数据，并基于点源地理信息和路网信息图层，采用排放系数法和ArcGIS工具构建了浙江省2015年3 km×3 km高空间分辨率扬尘源排放清单。结果表明，2015年浙江省扬尘源PM₁₀和PM_2.5的排放量分别为24.26×10⁴ t和6.00×10⁴ t，其中PM₁₀和PM_2.5排放贡献均主要为施工扬尘和道路扬尘，施工扬尘分别贡献37.7%和39.3%，道路扬尘分别贡献36.5%和39.1%。从城市空间分布来看，杭州市、宁波市、温州市、绍兴市扬尘排放总量居于全省前四，舟山市最低，而城市主城区排放量显著高于郊区。     

常州市裸露地面风蚀扬尘排放清单及分布特征研究

以2014年为基准年,以常州市行政边界为研究区域,利用卫星遥感解译的土地利用类型和裸土面积信息,并通过国土、气象等部门提供的土壤类型、气象因子等相关资料获取本地化因子和参数,估算常州市行政区域内裸露地面土壤扬尘中颗粒物的年排放量。结果表明:常州市裸露地面主要分布在金坛市、溧阳市和武进区,市中心区域最少,裸露土地利用类型主要为农田、滩涂、裸露山体、荒地及未硬化或未绿化的空地等;2014年常州市行政区域内裸露地面风蚀扬尘中TSP、PM 10、PM 2.5的年排放量分别为62.66 t、5.63 t、0.24 t,其中,金坛市土壤起尘量最大,其次为武进区,再次为新北区、溧阳市,市中心区域土壤扬尘最少。     

用“封闭型”扩散模式对兰州市城区SO2允许排放量计算方法的确定

利用“封闭型”扩散模式计算兰州市ＳＯ２允许排放量，即如何处理兰州市与平原城市在地形和气象条件上的差异，制定了ＳＯ２排放标准既无碍工业发展又能改善大气环境质量，的要求，按照《制定地在气污染排放标准的技术原则和方法》及附录Ａ物Ｅ中的有关规模和模式，通过模式计算结果与“原则”中总量控制方法所得的结果相比较，“封闭型”扩散模式ＳＯ２允许排放量基本适合兰州市污染状况。     

Externalities of Fugitive Dust

It is known that fugitive dust can cause human health and environmental problems, alone or in combination with other air pollutants. These problems are referred to as ‘external costs’ that have been traditionally ignored. However, there is a growing interest towards quantifying externalities to assist policy and decision-making. With this in mind, the present study aimed at discussing the environmental regulations that deal with fugitive dust, the impact of fugitive dust on human health and global climate system, and the available methods for calculating fugitive dust externalities. The damage cost associated with human health and global environmental problems was predicted based on the environmental strategy priority model. The damage cost estimated by the model ranged from 40 to 374 EUR/kg of emitted fugitive dust with a mean value of 120 EUR/kg of emitted fugitive dust. It was also found that PM_2.5 and PM₁₀ have contributed to about 60% and 36% of the estimated damage cost, respectively. The remaining 4% was attributed to both nitrate and sulfate aerosols.     

Chemical Constituents of Fugitive Dust

Wind erosion selectively winnows the fine, most chemically concentrated portions of surface soils and results in the inter-regional transport of fugitive dust containing plant nutrients, trace elements and other soil-borne contaminants. We sampled and analyzed surface soils, sediments in transport over eroding fields, and attic dust from a small area of the Southern High Plains of Texas to characterize the physical nature and chemical constituents of these materials and to investigate techniques that would allow relatively rapid, low cost techniques for estimating the chemical constituents of fugitive dust from an eroding field. From chemical analyses of actively eroding sediments, it would appear that Ca is the only chemical species that is enriched more than others during the process of fugitive dust production. We found surface soil sieved to produce a sub-sample with particle diameters in the range of 53–74 μm to be a reasonably good surrogate for fugitive dust very near the source field, that sieved sub-samples with particle diameters <10 μm have a crustal enrichment factor of approximately 6, and that this factor, multiplied by the chemical contents of source soils, may be a reasonable estimator of fugitive PM₁₀ chemistry from the soils of interest. We also found that dust from tractor air cleaners provided a good surrogate for dust entrained by tillage and harvesting operations if the chemical species resulting from engine wear and exhaust were removed from the data set or scaled back to the average of enrichment factors noted for chemical species with no known anthropogenic sources. Chemical analyses of dust samples collected from attics approximately 4 km from the nearest source fields indicated that anthropogenic sources of several environmentally important nutrient and trace element species are much larger contributors, by up to nearly two orders of magnitude, to atmospheric loading and subsequent deposition than fugitive dust from eroding soils.     

Airborne Dust Particle Counting Techniques

The paper briefly describes an electro-optical system for counting of dust particles, which is based on the scattering phenomena.Utilizing the scattering of light by various size particles present in the environment, various particle counting techniques have been developed in order to measure the scattered intensity of light. Light scatters in all directions but much more in the so-called near forward direction 17^∘ off axis, at 163^∘ from the light source in the visible range.On the basis of two techniques, the right angle and forward angle scattering, opto-mechanical systems have been developed which measure scattered intensity and particulate matter. The forward scattering Nephelometer is more sensitive and therefore is more suitable for pollution monitoring than the right angle scattering Nephelometer. Whereas the right angle scattering Nephelometer has the utility in extremely low concentration in ppb level owing to the excellent light trap efficiency in comparison to forward scattering Nephelometer. In this paper measurement techniques and measurement results associated with design and development of a real time particle analyser are also discussed.     

粉尘捕集用滤膜的性能实验结果

本文介绍了粉尘捕集用滤膜的性能、捕集原理、选择方法和滤膜的捕集效率、阻力的实验结果。     

Dust exposure in indoor climbing halls

The use of hydrated magnesium carbonate hydroxide (magnesia alba) for drying the hands is a strong source for particulate matter in indoor climbing halls. Particle mass concentrations (PM10, PM2.5 and PM1) were measured with an optical particle counter in 9 indoor climbing halls and in 5 sports halls. Mean values for PM10 in indoor climbing halls are generally on the order of 200-500 microg m(-3). For periods of high activity, which last for several hours, PM10 values between 1000 and 4000 microg m(-3) were observed. PM(2.5) is on the order of 30-100 microg m(-3) and reaches values up to 500 microg m(-3), if many users are present. In sports halls, the mass concentrations are usually much lower (PM10 < 100 microg m(-3), PM2.5 < or = 20 microg m(-3)). However, for apparatus gymnastics (a sport in which magnesia alba is also used) similar dust concentrations as for indoor climbing were observed. The size distribution and the total particle number concentration (3.7 nm-10 microm electrical mobility diameter) were determined in one climbing hall by an electrical aerosol spectrometer. The highest number concentrations were between 8000 and 12 000 cm(-3), indicating that the use of magnesia alba is no strong source for ultrafine particles. Scanning electron microscopy and energy-dispersive X-ray microanalysis revealed that virtually all particles are hydrated magnesium carbonate hydroxide. In-situ experiments in an environmental scanning electron microscope showed that the particles do not dissolve at relative humidities up to 100%. Thus, it is concluded that solid particles of magnesia alba are airborne and have the potential to deposit in the human respiratory tract. The particle mass concentrations in indoor climbing halls are much higher than those reported for schools and reach, in many cases, levels which are observed for industrial occupations. The observed dust concentrations are below the current occupational exposure limits in Germany of 3 and 10 mg m(-3) for respirable and inhalable dust. However, the dust concentrations exceed the German guide lines for work places without use of hazardous substances. In addition, minimizing dust concentrations to technologically feasible values is required by the current German legislation. Therefore, substantial reduction of the dust concentration is required.     

光度计式烟尘浓度监测仪的标定

在过滤式测尘仪前连接一测烟管,即能利用锅炉烟尘对光度计式烟尘浓度监测仪进行标定,此标定值表征仪器光束所穿过烟道上各处烟尘的平均浓度与测定量的比例系数。     

Vanadium Concentrations in Settled Outdoor Dust Particles

Atmospheric dustfall is an important aspect of urban dust studies. Vanadium is considered as the marker element of air pollution emitted from residual oil and coal combustion. In this study, vanadium levels of outdoor dust particles are determined. The studied area covers the six sites located in Adapazarí (Turkey), which represents an earthquake-hit environment. The mass deposition rate was calculated for each sampling plate over the 30-days collection periods. The deposition rates for the six places in Adapazarí ranged from 20.5 to 84.9 μg/cm²/day. The arithmetic mean deposition rate for all places was 45.3 μg/cm²/day. Total dust deposition and vanadium loadings typically increased in magnitude according to the area order: Kampus > Serdivan > Çark C. > Ozanlar > Erenler > Ye?iltepe and Kampus > Serdivan > Çark C. > Ozanlar > Erenler > Ye?iltepe, respectively. The results suggested that vanadium may be useful for assessing the level of environmental pollution.     

全程加热采样管和半程加热采样管对超净排放污染源颗粒物监测结果的影响

根据《煤电节能减排升级与改造行动计划》以及《国家环境保护"十三五"规划纲要》,我国燃煤电厂污染物排放浓度应达到现行燃气锅炉标准,现行颗粒物监测仪器需要进行更新。现在市面上有2种污染源颗粒物采样管可对改造后电厂进行颗粒物采样监测,采用平行实验法对这2种采样管所采集的颗粒物质量结果进行分析,同时使用验证实验分析2种采样管颗粒物采集质量结果产生差异的原因,并对如何提升燃煤电厂颗粒物监测的准确性提出建议。