Water demand of central pivot-irrigated areas in Bahia,Brazil: management of water resources applied to sustainable production

When performed without technical criteria, the rapid expansion of irrigated agricultural frontiers can result in overexploitation of water, causing worrying impacts on the balance of agroecosystems. This study proposes a model applied to the state of Bahia, to estimate the water demand of areas irrigated by a central pivot, in order to contribute to information that will subsidize the inspection and planning of water resources in the promotion of sustainable agriculture. The irrigated areas were identified and measured by photointerpretation using orbital images from the Landsat-8 satellite. With a historical series of data, the reference evapotranspiration was calculated and monthly water balance was elaborated. The data obtained were spatialized by kriging, and with punctual values of water deficit (mm), the water demand of the irrigated perimeter of the equipment was estimated. The results were described considering strategic planning units, proposed from municipalities, hydrographic basins and biomes. A total of 4075 pivots were quantified, covering an irrigated area of 265,896.30 ha and with an average annual consumption of 1,333,473,208.02 m³ of water. Areas of high demand were identified, especially in the western region of Bahia, which includes the hydrographic basin of the São Francisco River and the Cerrado biome, concentrating 80.85% and 75.47% of the state water demand for pivots, respectively. Considering possible points of water vulnerability and continuity of this expansion, the results provide the primary information needed to encourage the adoption of public policies aimed at the management of water resources. The study method proposes guidelines that condition the application in any region of interest in the world.

Graphical abstract

     

Impact of Massanjore Dam on hydro-geomorphological modification of Mayurakshi River,Eastern India

Massanjore reservoir (area ~67 km²) located 84 km downstream from the most distant upstream source capacitates 620,000,000 m³ of water, and regulated flow characters are highly responsible for dam downstream alteration of hydrological, sedimentological and geomorphological characteristics of Mayurakshi River. In dam after condition, monsoon water level (mean water level during monsoon months) and pre-monsoon water level (mean water level during pre-monsoon months, i.e., March–May) have attenuated about 0.56 and 0.32 m, respectively. Maximum duration of high flow period during monsoon has reduced up to 16.5 %; coefficient of variation of diurnal fluctuation of water level during monsoon has increased from 31 to 47 %. Suspended sediment load in Mayurakshi River is reduced to 34 % in dam after period as recorded at Narayanpur gauge station. Average suspended sediment load has decreased even after Tilpara barrage construction from 4.960 to 4.350 mg/L. Average suspended sediment load is 7.875 mg/L in the sites of dam upstream course, and this average is only 4.46 mg/L in different sites of dam downstream course. Volume of discharge has decreased up to 11.3 % during monsoon time in dam after condition. Such reduction in discharge volume in turn has reduced about 24.6 % bed load-carrying capacity. As a result, huge deposition within channel invigorated channel bed aggradations (average 73.6 cm up to Saspara, site 14 at Fig. 1) in dam after condition. Narrowing of active channel, coarsening of channel bed materials, lowering of lateral stability, accelerating rise of braiding index, mixed response of the channel adjustment of the tributaries to local scale positive or negative base level change due to river bed aggradations and degradation, etc. signify the morphological alteration of dam downstream course.

Open image in new window

Fig. 1 Mayurakshi River basin indicating Massanjore Dam, Tilpara barrage and sample working sites

     

Population, environment and poverty in Pakistan: linkages and empirical evidence

This study explores the interlinkages among population, environment and poverty and presents empirical evidence in a developing country like Pakistan. It gives alternative views on population environment linkages. It explains poverty trap, market based harmony, and dual effect of poverty on the basis of a link between population growth and natural resource degradation. In addition, the paper also highlights social and political instability through population-poverty-environment spiral. It also presents empirical evidence on population-environment-poverty nexus in Pakistan. It also compares environmental sustainability index and human development index for selected Asian countries. The paper also gives scores for different components of environmental sustainability index for Pakistan and compares these with India. The paper concludes that the causal relationship between poverty and environment works in both directions, often through changes in GDP and population. Population stress does not have any significant direct effect on all aspects of environmental status in Pakistan.

Exploring the relationship between unethical practices,buyer–supplier relationships and green design for sustainability

Sustainable procurement practices have gained popularity amongst both researchers and supply chain practitioners. However, ethical practices in sustainable procurement have been the topic of discussion in the recent years. The goal of the study is to scientifically build a green procurement framework by exploring relationship between buyer–supplier relationships, unethical practices and green design for sustainability. The study was conducted considering samples from South African steel and engineering sector. Data show high rate of wastages and losses occurring at various stages of steel and engineering supply chains. Every steel and engineering company aims to reduce such losses for improving their profitability and achieve sustainability. The empirical findings show that such wastage and losses can be minimised through efficient eco-design and involvement of key suppliers at the design stage so that disassembly, recycling and reuse options not only prove successful but as well cost-effective for the organisation. Also we find that buyer deceitful practices are a strong determinant of green design for sustainability. Buyers making up a second source of supply for green components and preferring green suppliers being approved by top management is helpful for mitigation of supply risks under green procurement process. The present study is distinctive in terms of coverage and its contribution to supply chain theory.     

Supplier evaluation and selection for sustainable supply chain management under uncertainty conditions

Abstract

With the global increasing importance of sustainable development, sustainable supply chain has gained value among both researchers and industrialists in the last decade. Nowadays, industries are facing pressure from government legislation and the global competition in addition to the pressure from their clients to carry out environmentally – conscious actions. Thus, organisations are required to implement actions to enhance their level of both environmental and economic performances. Traditionally, organisations use criteria such as cost, quality and on-time delivery to evaluate their suppliers’ performance. Although there have been numerous studies on the common criteria for these assessments, very few studies have taken sustainable criteria into consideration. Thereupon, this study tries to put forward a complete model for selection and evaluation of the suppliers, considering three criteria for sustainability, thus using the fuzzy group graph theory and matrix approach. It is an innovative approach based on fuzzy logic and group decision-making, which aims to treat lack of certainty in selection and evaluation of suppliers. We will also discuss a case study in the industry to demonstrate the effectiveness of our proposed approach.     

A strategic quantitative approach for sustainable energy production from biomass

European legislation has created a growing interest in the field of renewable energy production in several countries, including Italy. The applications of biomass and/or biofuel for energy generation have been assumed to provide a high level of sustainability due to the perception that renewable resources are inherently sustainable. Thus, renewable fuels applied to heating and/or electricity generation are potentially carbon dioxide neutral. However, before accepting this assumption, it is essential to analyse the actual level of sustainability in the whole supply chain (SC). This requirement has been clearly identified by the recently updated European Directives on renewable biofuels for transportation. However, there is little evidence that this concern has been directed at energy production from biomass. Thus, approaches derived from Green SC Management (GSCM) methods could provide an effective tool for evaluating, from a strategic perspective, the sustainability level of a specific biomass SC. This paper examines how biomass SC activities can define the overall environmental sustainability level. The approach was based on environmental indicators and the resultant output could support more effective GSCM strategies (e.g. defining logistics carriers, evaluating new biomass suppliers, etc.) for managing biomass SCs. Moreover, the approach could be applied by competent authorities for a quick evaluation of the sustainability level of biomass energy production installations. The approach has been tested in a real case study based on an installation, located in Southern Italy, which uses liquid biomass for energy production.     

Evaluating the role of environmental quality in the sustainable rural economic development of England

The issue of the sustainable development of rural economies in England has recently received considerable attention. This is because many of the poorest areas in the country are rural, often of high environmental quality, but suffering from high unemployment and a lack of services and facilities. The rapid decline in agricultural incomes and in-migration of affluent urban workers since 1990 has exacerbated economic inequality in such areas. A number of factors have the potential to drive rural development and this paper applies, and considers, the feasibility of a method from the USA for combining economic and environmental variables in a regional growth model to examine the hypothesis that environmental quality is an important determinant of sustainable rural development in England. The model output suggests that, although environmental quality does play a role in sustainable rural development in England there are other, more important, factors driving development. These include business and communications infra-structure, the degree and opportunities for commuting and underlying employment prospects. The robustness and limitations of the method for combining economic and environmental variables is discussed in relation to the spatial interrelatedness of Local Authority Districts in England, and conclusions are drawn about areas for refinement and improvement of the method.

Sustainable engineering education in the United States

Sustainable engineering is a conceptual and practical challenge to all engineering disciplines. Although the profession has experience with environmental dimensions of engineering activities that in some cases are quite deep, extending the existing body of practice to sustainable engineering by including social and cultural domains is a significant and non-trivial challenge. Nonetheless, progress is being made, as a recent study undertaken by the Center for Sustainable Engineering in the United States demonstrates.

Eco-design practices towards sustainable supply chain management: interpretive structural modelling (ISM) approach

Due to increasing emphasis on sustainable practices, many organisations have attempted to leverage their supply chain performance towards balancing triple bottom line dimensions (economic, environmental and social perspectives). This paper, therefore, determines the priorities of sustainable supply chain management focusing on eco-design. Interpretive structural modelling (ISM) and Matriced’ Impacts Croise’s Multiplication Appliquée a UN Classement (MIMAC) are used to identify the hierarchical structure of the relationships among eco-design dimensions, and to analyse characteristics power of each dimension on supporting eco-design practices. The relationships and characteristics power of each dimension are used to determine indicators that are effective in enhancement of eco-design practice, evaluated through sustainable supply chain performance. Results indicate that product deployment is an important approach for improving eco-design practice towards sustainable supply chain management. This emphasises the purpose and impact of eco-design on sequential supply chain activities at deployment phase. Further research is required to make an overall assessment of eco-design practices across range of manufacturing industries, given the current research is based on inputs from a limited number of experts of selected organisations.     

Willingness to pay and demand elasticities for two national parks: empirical evidence from two surveys in Pakistan

Using survey-based data approach for modeling the demand for environmental goods/resources, this study estimates income and price elasticities of demand for improved environmental quality of two National Parks in Northern Pakistan. The study uses data from two studies. The estimates indicate that improved environmental quality effects can be described as a luxury and an ordinary and price elastic service. Confidence intervals show however that the classification as a luxury is not statistically significant. Income elasticities of willingness to pay are estimated for a broad range of environmental services. The study finds that income and willingness to pay vary directly and significantly. The elasticity estimates, in general, are greater than zero, but less than unity. The study concludes that environmental improvements are more beneficial to low-income groups than for high-income groups.

Problems of cross-scale coastal management in Scandinavia

Transdisciplinary knowledge integration and cross-scale management remain challenges in coastal management after several decades of research and experience with integrated and sustainable coastal management. The aim of this paper is to identify requirements for knowledge integration and development of multi-scale approaches to coastal management through reviewing and re-analysing three Swedish-European research projects: the SUCOZOMA project about sustainable coastal zone management, the FRAP project about conflicts between coastal fishery and species protection, and the SECOA project about solutions to contrasts in coastal metropolitan areas. The strategy of adaptive governance is considered in the light of its ability to assess knowledge requirements for sustainable resource management under conditions of climate change.     

Endogenous ethanol and acetaldehyde in the mechanisms of adaptation of small mammals to northern conditions

Study results on the condition of endogenous ethanol—acetaldehyde system in northern red-backed vole (Myodes (=Clethrionomys) rutilus Pallas, 1779), common species of northern latitudes, are presented. Concentrations of endogenous ethanol (EE) and acetaldehyde (EA) in blood, activities of alcohol dehydrogenase in ethanol oxidation reactions (ADH_I) and liver acetaldehyde (ADH_II) and aldehyde dehydrogenase (ALDH) reduction, and catalytic parameters of these enzymes are determined for winter and summer periods. Changes in ethanol—metabolizing dehydrogenase enzyme system in northern red-backed vole leading to statistically significant (p < 0.01) increase in blood EE and EA concentrations compared to white nonpedigreed laboratory rats without adaptations to cold (especially in winter period) are determined to serve ecoadaptive, antistress functions, comprising one of the systems for regulation of metabolism intensity in small mammals inhabiting extreme northern conditions. Ecological—physiological functions of EE and EA system are increasing the organism’s resistance to the influence of cold temperatures and maintaining thermoregulation even under rapid, considerable environmental temperature drops.     

The EU sustainable energy policy indicators framework

The article deals with indicators framework to monitor implementation of the main EU (European Union) directives and other policy documents targeting sustainable energy development. The main EU directives which have impact on sustainable energy development are directives promoting energy efficiency and use of renewable energy sources, directives implementing greenhouse gas mitigation and atmospheric pollution reduction policies and other policy documents and strategies targeting energy sector. Promotion of use of renewable energy sources and energy efficiency improvements are among priorities of EU energy policy because the use of renewable energy sources and energy efficiency improvements has positive impact on energy security and climate change mitigation. The framework of indicators can be developed to establish the main targets set by EU energy and environmental policies allowing to connect indicators via chain of mutual impacts and to define policies and measures necessary to achieve established targets based on assessment of their impact on the targeted indicators representing sustainable energy development aims. The article discusses the application of indicators framework for EU sustainable energy policy analysis and presents the case study of this policy tool application for Baltic States. The article also discusses the use of biomass in Baltic States and future considerations in this field.     

Pesticide use practices among smallholder vegetable farmers in Ethiopian Central Rift Valley

Pesticide use is a common practice to control pests and diseases in vegetable cultivation, but often at the expense of the environment and human health. This article studies pesticide-buying and use practices among smallholder vegetable farmers in the Central Rift Valley of Ethiopia, using a practice perspective. Through in-depth interviews and observations, data were collected from a sample of farmers, suppliers and key governmental actors. The results reveal that farmers apply pesticides in violation of the recommendations: they use unsafe storage facilities, ignore risks and safety instructions, do not use protective devices when applying pesticides, and dispose containers unsafely. By applying a social practice approach, we show that these pesticide-handling practices are steered by the combination of the system of provision, the farmers’ lifestyle and the everyday context in which pesticides are being bought and used. Bringing in new actors such as environmental authorities, suppliers, NGOs and private actors, as well as social and technological innovations, may contribute to changes in the actual performance of these pesticides buying and using practices. This article argues that a practice approach represents a promising perspective to analyse pesticide handling and use and to systematically identify ways to change these.     

Promoting integration and cooperation for sustainability views from the symposium held at UNESCO headquarters September 19, 2013

This public symposium explored ways to integrate knowledge about and strengthen cooperation on complex and interconnected global sustainability issues. (The symposium was organized by the United Nations University (UNU), The University of Tokyo Integrated Research System for Sustainability Science (IR3S), as well as UNESCO. Co-organizers were the Ministry of Education, Culture, Sports, Science and Technology-Japan (MEXT) and the Japan Society for the Promotion of Science (JSPS). Participants included representatives from key institutes and UNESCO’s programs in the areas of water, ocean and ecological sciences as well as social and natural sciences, UNESCO Member states, scholars and policymakers. The symposium program and list of speakers is attached. See also www.isp.unu.edu). The central question put to symposium deliberations was one that many policy- and decision-makers as well as academic scholars struggle with today: how can we overcome barriers to action that will put societies around the world on a path to a more stable and sustainable future? This article examines the presentations made during the symposium and draws upon them to explore opportunities for sustainability scientists to help meet this challenge. The paper is divided into three parts: Part I provides a brief introduction that places the symposium in context of current debates on sustainability science and discusses (a) the role of UNESCO and (b) the relevance of sustainability science to policy- and decision-making for sustainable development. Part II examines three steps that can be taken now to overcome barriers to sustainability and the role of sustainability science in each (a) building societal and environmental resilience; (b) increasing collaboration across geographical and disciplinary boundaries as well as between scientists and decision-makers; and (c) enhancing education for sustainable development (ESD). The paper concludes with a review of why these keys are essential and steps that can be taken in the future to facilitate their widespread application at multiple scales.     

Are sustainable cities “happy” cities? Associations between sustainable development and human well-being in urban areas of the United States

In this paper, we assess the associations between self-reported happiness, measured using the Gallup Healthways Well-Being Index (2012), and four US city sustainability indices: the Green City Index (2011), Our Green Cities (2012), Popular Science US City Rankings (2008) and the SustainLane US Green City Rankings (2007). Based on the examination of nonparametric, rank-based correlations, we found positive associations between sustainable development and happiness on all scales and statistically significant correlations for two of the four SD indices. Results support previous research, emphasize the value of explicit consideration of happiness when measuring urban sustainability and highlight the need for future research that assesses the influence of specific subsystems of urban development on self-reported happiness.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment