污泥吸附剂对3种染料吸附动力学的研究

以污水厂脱水污泥、锯末和焦油的混合物为原料,选择ZnCl₂为活化剂制备出过渡孔发达、强度大的污泥吸附剂（S-AC）。借助BET、FT-IR等现代分析测试方法对污泥吸附剂进行表征,同时,研究了吸附剂对酸性大红、中性红和碱性品红吸附动力学行为。结果表明,制得的污泥吸附剂BET比表面积为358 m²/g,强度大于89%。吸附剂的动力学数据均符合伪二阶动力学方程、液膜扩散方程和颗粒内扩散方程,其中液膜扩散为吸附剂对酸性大红吸附过程的主控步骤,颗粒内扩散为吸附剂对中性红和碱性品红吸附过程的主控步骤。     

利用复合添加剂研制免烧免蒸粉煤灰砖

论述了利用复合添加剂生产免烧免蒸粉煤灰砖的制造技术，并采用模糊数学和正交试验法求出最佳工艺参数。试验表明该项新技术生产的粉煤灰砖具有强度大、抗冻性与耐水性好及成本低等优点。     

活性炭-微波辐射法去除苯酚的机理研究

通过微波辐射前后水样的紫外分光扫描分析,以及微波辐射后水样中的苯酚浓度和COD浓度之间线性相关性分析表明,活性炭-微波辐射强化除酚效率的主要机理是微波使反应体系温度升高导致的活性炭加速吸附作用,而不是微波诱导催化氧化作用。通过对微波辐射前后活性炭的SEM扫描电镜分析说明,活性炭在微波场中由于“微域爆炸”导致其表面及内部孔隙结构的变化, 吸附性能得到改善,是强化苯酚去除的另一原因。 研究还表明,在较短的作用时间内,活性炭-微波辐射法的除酚效率高于常温吸附,但低于沸腾条件下的高温吸附。活性炭-微波辐射去除苯酚的规律遵循其吸附特性,温度越高,吸附反应速度越快。     

Characteristics of different molecular weight fractions of organic matter in landfill leachate and their role in soil sorption of heavy metals.

We have characterised two kinds of municipal landfill leachates derived from 'old' and 'young' municipal waste landfills on the basis of the molecular weight distribution of the constituents, taking into account that the great variety of leachate constituents prevents any evaluation of the fate and of the role played by each component in the environmental impact. In the sample S1 (old leachate), the constituents were distributed over a wider range of molecular weights; high molecular weight fractions were present. In sample S2 (young leachate), the fractions are actually narrower at the lower molecular weights. The high molecular weight fractions of old leachates are found to be complex structures formed by condensed nuclei of carbons substituted by functional groups containing nitrogen, sulphur and oxygen atoms; the low molecular weight fractions of leachates are, instead, characterised by linear chains substituted by oxygenated functional groups such as carboxyl and/or alcoholic groups. After characterising each fraction we studied the role played by these fractions in the soil's capability for retaining heavy metals [copper (Cu) and cadmium(Cd)]. The Cd uptake increases only on the soil treated with sample S1 characterised by a higher pH value and by the presence of high molecular weight fractions. The Cu uptake also increases on the soil treated with sample S2, characterised by the sole presence of low molecular weight fractions. On the other hand, the metal adsorption tests performed on soil treated with the single fractions show that the amount of Cu and Cd retained by soil treated with the high molecular weight fractions of sample does not increase after 72 h of treatment and that the amount of Cu retained by the low molecular weight fractions of sample S1 and by the fractions of sample S2 increases, but does not justify the amount retained by soil treated with the total leachates.     

The effect of bee pollen on secretion activity, markers of proliferation and apoptosis of porcine ovarian granulosa cells in vitro

The general objective of this in vitro study was to examine the effect of bee pollen on the release of insulin-like growth factor I (IGF-I) and steroid hormone progesterone, and expression of markers of proliferation (PCNA) and apoptosis (caspase-3) in porcine ovarian granulosa cells. Concentrations of IGF-I and progesterone were determined by RIA method and expression of PCNA and caspase-3 by immunocytochemistry. Bee pollen addition at the dose of 10 ng/mL significantly (P<0.05) inhibited IGF-I release by porcine ovarian granulosa cells. This growth factor was not influenced by 100 and 1000 ng/mL doses of bee pollen. Progesterone release by cells was not influenced by bee pollen addition at the doses of 10, 100 and 1000 ng/mL as used in our study. Similarly expression of PCNA and caspase-3 was not affected by bee pollen addition. The present study shows dose-dependent regulation of IGF-I by experimental bee pollen addition in vitro. Progesterone release, expression of PCNA and caspase-3 in porcine ovarian granulosa cells was not induced by pollen. Our results contribute to new insights regarding the possible effect of bee pollen on IGF-I release, which is important for regulation of porcine ovarian functions.     

有机改性剂对水中有机氯农药提取效率的影响研究

通过有机改性剂在液液萃取和固相萃取条件下水中有机氯农药的提取效率比对分析,首次探讨了有机改性剂对水中有机氯农药提取效率的影响。结果表明,(1)液液萃取前处理水样中不加有机改性剂、固相萃取前处理水样中添加一定量有机改性剂时,水中有机氯农药的提取效率较高;(2)采用正交实验优化水中有机氯农药固相萃取的提取效率实验表明,有机改性剂添加量对其影响大于有机改性剂种类对其影响;最佳优化方案为水样中添加1%甲醇时,提取效率最高。     

Role of surface functionality in the adsorption of anionic dyes on modified polymeric sorbents

While synthetic polymeric sorbents effectively treat dye wastewaters by adsorption, the underlying mechanisms remain to be understood. This work determined the adsorption of an anionic dye by three polymers differing significantly in surface functionality. Surface functional groups of polymers were indicated in FTIR spectra and quantified by the Boehm titration. In reference to the commercial sorbent XAD-4 with a low degree of functionality, the laboratory synthesized NG-8 had primarily acidic functional groups, whereas its aminated product MN-8 had mainly basic amino groups. Electrophoresis determined the points of zero charge of 4.18, 3.23, and 4.51 for XAD-4, NG-8, and MN-8, respectively. The adsorption of Reactive Black 5 dye (RB5) by all the sorbents on a unit surface area basis increased with decreasing pH. At the same low pH (4.40), the adsorption by NG-8 was similar to that by XAD-4, indicating little influence of protonated (neutral) surface functional groups. In contrast, the adsorption by NG-8 at pH 6.05 was 75% lower than that by XAD-4, resulting apparently from the strong electrostatic repulsion between RB5 and deprotonated (negative) groups. Amination substantially enhanced RB5 adsorption by eliminating acidic groups and creating a positive charge on the surface of MN-8. The adsorptive enhancement was also achieved in the presence of CaCl2, due presumably to the neutralization of negative surface charge by Ca2+ and the RB5-Ca2+ pairing. These results manifest the important role of surface functionality in the adsorption of dyes by synthetic polymers.     

稀盐酸预处理对稻草厌氧消化的影响

为探明稀酸预处理对稻草厌氧消化的影响,采用不同浓度的稀盐酸溶液对稻草进行了浸泡预处理,并在完全混合厌氧消化条件下,研究了稻草厌氧发酵过程中的产气量、甲烷含量,发酵液中COD、pH值及挥发性脂肪酸(VFA)的变化情况.结果表明,增大稀盐酸溶液浓度会提高稻草厌氧消化反应的效果.分别经4%、8%和12%的稀盐酸溶液浸泡预处理...     

印染行业热定型机油烟废气检测方法研究

建立了粘胶基活性炭纤维吸附-正己烷萃取-紫外分光光度法检测热定型机油烟废气的方法,以印染厂实际热定型机油烟废气萃取液为标准油烟,在230 nm处测吸光度,绘制标准曲线,相关系数为0.999 7.实验结果表明,正己烷1次萃取率超过了90%,紫外分光光度法标准偏差为0.344～0.693,相对标准偏差在5%内,平均加标回收率为93%～98%,方法检出限为0.829 mg/L.粘胶基活性炭纤维耐高温,对0～100 mg/L的热定型机油烟废气的饱和吸附量为1.0～2.5 g/g.用Langmuir、Freundlich和DR方程对实验吸附等温线进行了拟合,低油烟浓度时Langmuir方程拟合较好,高浓度油烟时DR方程拟合较好.     

3种污泥对磺胺二甲基嘧啶的吸附性能

研究了厌氧颗粒污泥、厌氧污泥及好氧污泥对磺胺二甲基嘧啶(SM2)的吸附性能。当SM2初始浓度为50μg/L时,采用活性污泥灭活吸附,考察了吸附平衡时间、吸附等温线及温度对污泥吸附的影响,并比较了失活污泥与活性污泥的吸附性能。结果表明,3种污泥对SM2的吸附均在1 h内达到吸附平衡;3种失活污泥对SM2的吸附都可用Freundl-ich和Langmuir吸附模型来描述,并且Freundlich吸附模型的拟合效果要好于Langmuir模型(R2F>R2L);温度对3种污泥吸附影响规律一致,并且吸附常数KF(15℃)>KF(25℃)>KF(35℃),这说明吸附为放热反应,低温有利于吸附反应的进行。活性污泥对SM2的吸附与失活污泥吸附规律一致,都符合Freundlich模型。3种活性污泥对SM2的去除是吸附和降解的共同作用,并且都是降解占主导地位,降解效率为厌氧污泥>好氧污泥>厌氧颗粒污泥。     

Effects of potassium alkalis and sodium alkalis on the dechlorination of o-chlorophenol in supercritical water

Effects of potassium alkalis and sodium alkalis on the dechlorination of o-chlorophenol (o-CP) in supercritical water (SCW) were studied in this paper under the conditions of 450 degrees C and 25 MPa. Experimental results indicated that the dechlorination of o-CP can be accelerated significantly by all alkalis investigated. The dechlorination of o-CP proceeded mainly via two pathways: hydrodechlorination and hydrolysis. Both of the two pathways can be promoted by alkalis, and the dechlorination of o-CP can be accelerated by both the cations and hydroxide ion dissociated from alkalis. The overall dechlorination of o-CP can be accelerated by cations via promoting the hydrodechlorination pathway, while, hydroxide ion via promoting the hydrolysis pathway. In addition, the hydrodechlorination can be accelerated faster by sodium alkalis than that by potassium ones, while, the hydrolysis can be promoted faster by potassium alkalis. This difference may be caused by the different charge density between potassium ion and sodium ion, and the different solubility and dissociation constant between potassium alkalis and sodium alkalis in SCW. Dechlorination of o-CP with addition of alkalis prior to supercritical water oxidation (SCWO) process not only can avoid the reactor corrosion caused by the generated hydrochloric acid in direct SCWO of o-CP, but also can reduce the formation of toxic chlorinated byproducts compared with direct SCWO process or SCWO of o-CP with addition of alkali.     

Influence of surfactants on solubilization and fungal degradation of fluorene

Eighteen fungal strains were tested in toxicity assays with surfactants in order to select surfactants and strains tolerant to surfactants for degradation assays. Two nonionic surfactants were used, an alkylphenol ethoxylate, Triton X-100, a sorbitan ester, Tween 80 and an anionic surfactant, sodium dodecyl sulfate. Solubilization and biodegradation tests were conducted in liquid medium batch; fluorene was quantified by HPLC. Results showed the enhancement of fluorene solubilization by the three surfactants, good tolerance of nonionic surfactants by the fungal strains and the enhancement of the biodegradation of fluorene by Doratomyces stemonitis (46-62%) and Penicillium chrysogenum (28-61%) in the presence of Tween 80 (0.324 mM) after 2 days.     

Characterization of products of ozonolysis of acrylonitrile in liquid phase

In order to elucidate the reaction mechanism of the ozonolysis of acrylonitrile in the liquid phase, characterization of reaction products has been attempted. One of the products, which was volatile, has been found to be formaldehyde by derivatizing with dimedone. The infrared and mass spectra of the derivative corresponded with that of alkylidene dimedone. Three other reaction products were isolated by TLC using silica gel, CHCl₃:MeOH (80:20). These have been tentatively identified as glyoxal, epoxide of acrylonitrile and acetamide from their mass spectra. Based on these findings a reaction pathway for the formation of formaldehyde is proposed to be that described by Criegee.     

Mathematical description, optimization and prediction of synergistic interaction of fluoride and xylitol

The potential ability of various physical or chemical agents to enhance their effect when they are applied simultaneously with each other is well-known. The purpose of this study was to adjust a simple mathematical model to describe, optimize and predict a synergistic interaction between fluoride and xylitol on acid production by mutans streptococci. The model suggests that the synergism is caused by the additional effective damage arising from an interaction of sublesions induced by each agent. These sublesions are considered to be ineffective when each agent is used individually. The predictions of the model were verified by comparison with experimental data published by other researchers. It was shown that the model describes the experimental data, predicts the greatest value of the synergistic effect and the condition under which it can be achieved. The synergistic effect appeared to decline with any deviation from the optimal value of the ratio of effective damages produced by each agent alone.     

Estimation of the respiratory ventilation rate of preschool children in daily life using accelerometers

Inhalation rate is an essential factor for determining the inhaled dose of air pollutants. Here, accelerometers were used to develop regression equations for predicting the minute ventilation rate (V(E)) to estimate the daily inhalation rate in young children. Body acceleration and heart rate were measured in 29 Japanese preschool children (6 yr of age) during nine different levels of activities (lying down, sitting, standing, playing with plastic bricks, walking, building with blocks, climbing stairs, ball tossing, and running) using the Actical omnidirectional accelerometer, the ActivTracer triaxial accelerometer, and a heart rate monitor. Measurements were calibrated against the V(E) measured by the Douglas bag method. ActivTracer accelerometer measurements gave a strong correlation with V(E) (Pearson's r = 0.913), which was marginally stronger than that for the Actical counts (r = 0.886) and comparable to the correlation between heart rate and logarithmic V(E) (r = 0.909). According to the linear regression equation, the V(E) for lying down, sitting, standing, playing with plastic bricks, walking, and running was overestimated by 14-60% by the Actical and by 14-37% by the ActivTracer. By comparison, for building with blocks, climbing stairs, and ball tossing, the V(E) was underestimated by 19-23% by the Actical and by 13-18% by the ActivTracer. When these three activities were excluded, a stronger correlation was found between the V(E) and ActivTracer measurements (r = 0.949); this correlation was 0.761 for the three excluded activities. Discriminant analysis showed that the ratio between vertical and horizontal acceleration obtained by the ActivTracer could discriminate walking from building with blocks, climbing stairs, and ball tossing with a sensitivity of 75%. The error in estimating V(E) was considerably improved for the ActivTracer measurements by the use of two regression equations developed for each type of activity.     

Decolorization of mixtures of different reactive textile dyes by the white-rot basidiomycete Phanerochaete sordida and inhibitory effect of polyvinyl alcohol

We tried to decolorize mixtures of four reactive textile dyes, including azo and anthraquinone dyes, by a white-rot basidiomycete Phanerochaete sordida. P. sordida decolorized dye mixtures (200 mg l-1 each) by 90% within 48 h in nitrogen-limited glucose-ammonium media. Decolorization of dye mixtures needed Mn2+ and Tween 80 in the media. Manganese peroxidase (MnP) played a major role in dye decolorization by P. sordida. Decolorization of dye mixtures by P. sordida was partially inhibited by polyvinyl alcohol (PVA) that wastewaters from textile industries often contain. This was caused by an inhibitory effect of PVA on the decolorization of Reactive Red 120 (RR120) with MnP reaction system. Second addition of Tween 80 to the reaction mixtures in the presence of PVA improved the decolorization of RR120. These results suggest that PVA could interfere with lipid peroxidation or subsequent attack to the dye.     

废水催化湿式氧化稀土金属氧化物催化剂的研制

采用共沉淀法制得锰铈复合氧化物催化剂,催化湿式氧化处理高浓度苯酚废水。通过正交实验筛选催化剂制备条件,单因素实验优化制得催化剂。研究了CWAO处理废水条件下的金属离子溶出和催化剂的表征。结果表明,该催化剂在低温低压条件下具有优良的湿式氧化催化活性,且金属离子溶出量低,是一种CWAO处理高浓度有机废水中极具应用前景的新型高效催化剂。     

Estimating the extractability of potentially toxic metals in urban soils: a comparison of several extracting solutions

Metals released by the extraction with aqua regia, EDTA, dilute HCl and sequential extraction (SE) by the BCR protocol were studied in urban soils of Sevilla, Torino, and Glasgow. By multivariate analysis, the amounts of Cu, Pb and Zn liberated by any method were statistically associated with one another, whereas other metals were not. The mean amounts of all metals extracted by HCl and by SE were well correlated, but SE was clearly underestimated by HCl. Individual data for Cu, Pb and Zn by both methods were correlated only if each city was considered separately. Other metals gave poorer relationships. Similar conclusions were reached comparing EDTA and HCl, with much lower values for EDTA. Dilute HCl extraction cannot thus be recommended for general use as alternative to BCR SE in urban soils.     

Verification of the effect on risk due to reduction of benzene discharge

The time course of ambient benzene level and benzene discharge was investigated. Data obtained by continuous monitoring and monthly monitoring showed a decreasing trend of ambient benzene level. The rate of decrease was around 22-25% per two years from FY 1997 to FY 1999. The discharge data of benzene reported by several organizations were collected and re-arranged to estimate the total discharge in Japan. The total amount of benzene discharged decreased by 25% from 1997 to 1999. Risk reduction due to the regulation of benzene content in gasoline as predicted in our previous report was verified by the obtained data.