Spray deposition patterns during simulated work activities by lawn care specialists.

This simulated field study investigated patterns of spray deposition on the clothing of lawn care applicators using a tank truck and handheld spray gun. The purpose was to provide a basis for designing a protective garment for lawn care specialists. The influence of flow rate and experience level of applicators on spray deposition was studied. FD&C Blue #1 dye was sprayed simultaneously by novice and experienced applicators in timed walks. There were four replications at full and at reduced flow rates. Spray garments were cut into 23 pieces representing body parts. Dye was recovered using four rinses of distilled water and analyzed by standard spectrophotometric techniques. Significantly more dye was deposited on the lower portion of the body, both front and back legs, than on other body parts. The amount on the lower legs accounted for 59% of the total, while hands accounted for 28%. There was a tendency for experienced applicators to have more dye on their clothing than the novice applicators. The amount of dye deposition did not differ significantly with flow rate. The findings provide a basis for designing clothing and developing recommendations to improve protection for lawn care specialists.     

On‐target deposition of aerially applied deltamethrin

Abstract

The mean amount of deltamethrin deposited on natural substrates (i.e., soil and vegetation) in three experiments was 63, 73, and 76% of applied. Composite samples taken from 16 sites/replicate gave representative and repeatable measures of deposition. The use of Teflon discs as artificial targets to measure aerial deposition was investigated. The discs had only 34–71% mean trapping efficiency for the spray droplets. Deposition was quite variable among different sampling sites within a field (CV=73–83%). Much of this variation was caused by irregular overlapping of spray swaths.     

Effects of herbicide spray drift on selected species of nature conservation interest: the effects of plant age and surrounding vegetation structure

There has been increasing awareness of the possible impact of herbicide drift on vegetation in nature reserves and field-margin habitats adjacent to treated areas. However, relatively little is known about the impact of such drift on species typical of these habitats. To investigate this problem a series of bioassay experiments simulating spray drift were carried out with five native plant species of different age placed at different distances up to 4 downwind from a sprayer under standardized conditions. These experiments used three herbicides--glyphosate, MCPA and mecoprop--in three types of surrounding vegetation structure--short, medium-height and tall grassland. Many plants showed symptoms of damage after spraying but showed no significant growth reduction at the end of the season even underneath the sprayer. Where a reduction in yield was found, it occurred close to the sprayer. In general, young plants were more often affected than old ones. Yield promotion occurred for some species between 2 and 4 m downwind of the sprayer (curvilinear response) with unknown ecological consequences. The structure of the surrounding vegetation influenced the response for some species, which indicates that deposition patterns can be complex, and thus there may be difficulty in predicting effects in semi-natural communities from simple deposition models.     

Modelling changes in forest soil chemistry at 16 Swedish coniferous forest sites following deposition reduction

The dynamic forest ecosystem model ForSAFE was applied at 16 coniferous forest sites in Sweden to investigate past and future changes in soil chemistry following changes in atmospheric deposition. The simulation shows a considerable historical soil acidification. Acidification in the southwest, where deposition has been greatest, was more expressed in the deepest soil layers, while it was more evenly distributed through the soil profile in central Sweden, and was greater in the upper soil layers in the north. The simulation also shows that a slight recovery took place after the reduction in emissions, but was counteracted by the effect of harvesting. The simulation predicts an increase in the number of acidified sites in the future. The results also suggest that future acidification will be mainly due to the enhanced tree growth resulting from the chronic high deposition of nitrogen and the removal of soil base cations through harvesting.     

Effects of nozzle types and 2,4-D formulations on spray deposition

The objective of this study was to evaluate the effects of nozzle types and 2,4-D formulations on spray deposition on different targets. Two field experiments were carried out in a completely randomized design, and treatments were arranged in a factorial scheme. Species in experiment 1 were Sumatran fleabane (Conyza sumatrensis) and Brazil pusley (Richardia brasiliensis) and in experiment 2 were soybeans (Glycine max) and Benghal dayflower (Commelina benghalensis). For both experiments, the first factor corresponded to spray nozzles with different settings (AD 110.015 – 61 and 105 L ha^?1; AD 015-D – 75 and 146 L ha^?1; XR 110.0202 – 200 L ha^?1; and ADIA-D 110.02 – 208 L ha^?1) and the second factor consisted of two formulations of 2,4-D (amine and choline). The formulation of 2,4-D choline has contained Colex-D? Technology. Similar or higher spray deposition was observed on the leaves and artificial targets when using 2,4-D choline as compared to the 2,4-D amine formulation, and these differences in deposition were more evident for nozzles applying lower spray volumes. Deposition was more affected by nozzle type when amine formulation was used, compared to choline formulation.     

Effect of day time climatic conditions associated with different 2,4-D formulations on spray deposition and weed control

Abstract

The aim of this study was to evaluate the effect of time of the day and their associated climatic conditions on spray deposition of two 2,4-D formulations, as well as the influence on weed control. The experiment was installed in the field in complete randomized design. Treatments were arranged in factorial design 8?×?2, with 20 repetitions. First factor corresponded to different application time (1:00, 4:00, 7:00, 10:00, 13:00, 16:00, 19:00, and 22:00) with their respective climatic conditions. The second factor consisted of two formulations of 2,4-D applied at 776?g a.e. ha^?1 (2,4-D amine and 2,4-D choline salt with Colex-D? Technology) + glyphosate (816?g a.e. ha^?1). There was more spray deposition when 2,4-D choline formulation was used, and such differences were more evident for applications performed under adverse climatic conditions. More spray deposition was found in applications performed at times of day with more favorable temperature and humidity of the air conditions. Only the initial control of the evaluated species was affected by the time of application.     

Wetfall Deposition and Precipitation Chemistry for a Central Appalachian Forest

Abstract

Although extensive research on acidic deposition has been directed toward spruce-fir forests, less research has been done on the impacts of air pollution on eastern montane hardwood forests. The purpose of this study was to describe precipitation chemistry for several Appalachian hardwood forest sites at or near the Fernow Experimental Forest (FEF) to assess the potential for problems associated with acidic deposition. Emphasis was placed on seasonal patterns of ionic concentrations (H+, Ca++, NH4+; NO3-, and SO4=) and spatial variability of ionic concentrations and deposition among sites. Seasonal patterns of most ions showed highest concentrations during the summer months and deposition of H+ was especially pronounced during this time. Deposition of all ions was generally greater (related to greater precipitation) at three montane forested sample sites compared to a nonforested riverbottom site. Precipitation chemistry at FEF was similar to other sites throughout the eastern United States and contrasted sharply with mid-western and western sites. Eastern sites, including means for FEF sites, were uniformly 3-4 times higher in H+ and SO4= concentration than the mid-western and western sites. Precipitation at FEF was chronically acidic, more so during the growing season, and highest at higher elevations where environmental stresses can be most severe. Furthermore, there were occasional large discrepancies between the low-elevation site and the higher-elevation forested sites for precipitation chemistry and acidic deposition. These results suggest that synoptic-scale (network) data may greatly underestimate the pollutant conditions to which highelevation forest trees are exposed, since network data rarely take elevation into account and typically are based on annual ionic concentration and deposition means that may be considerably lower than those of the growing season.     

Concentration, size distribution, and dry deposition rate of particle-associated metals in the Los Angeles region

Daily averaged atmospheric concentrations and dry deposition fluxes of particulate metals were measured seasonally at six urban sites and one non-urban coastal site in the Los Angeles region using a conventional total suspended particulate matter (TSP) filter, surrogate surface deposition plates, and a Noll Rotary Impactor (NRI), which provides information about particle size distribution in four size ranges above 6 μm. With the exception of the non-urban site, particulate metal concentrations and deposition fluxes were remarkably uniform spatially and temporally. At all sites there were significant metal concentrations on particles greater than 10 μm, a commonly used upper limit for many air quality monitoring studies, and these large particles were estimated to be responsible for most of the deposited mass of metals. Annual averaged values of deposition rates measured with a surrogate surface were in good agreement with values estimated using theoretical deposition velocities in conjunction with measured size-segregated particle concentrations. Image analysis of particles deposited on NRI stage A, which collects all particles greater than 6 μm, indicated nighttime metal concentrations and deposition at the non-urban coastal site was higher than in the day time due to offshore advection of urban air associated with the diurnal land breeze. Measured enrichments of crustal elements and metals were correlated, indicating efficient mixing of natural and anthropogenic material from different sources, hypothesized to be the result of cyclical resuspension and deposition of dust by moving vehicles and wind.     

Spray atomization and deposition patterns of one newtonian and two pseudoplastic formulations after aerial application over a mature conifer forest in Newfoundland

Abstract

Spray atomization and deposition patterns of three formulations were investigated in five aerial spray trials in Newfoundland, to understand the inter‐relationships between physical properties, drop size spectra and recovery of the spray volume at ground level. Diflubenzuron (DFB) was sprayed at 30 g active ingredient in 2.0 L/ha. Futura XLV (Fu‐XLV) and Thuricide® 48LV (Thu‐48LV), spray formulations of Bacillus thuringiensis (B.t.), were both applied undiluted at 30 BIU/ha, but in volume rates of 2.1 L/ha and 2.36 L/ha respectively. Each of the three formulations was applied over a 15 ha plot using a Piper Pawnee aircraft fitted with six Micronair® AU5000 atomizers. Spray drops were sampled with Kromekote® cards and deposits were collected on glass plates. Physical properties measured were: viscosity at variable shear rates, volatility and surface tension. The viscosities increased progressively from low (for DFB), moderate (for Thu‐48LV) to high (for Fu‐XLV) values, showing a gradual increase in pseudoplastic behaviour of the three formulations. The volatility data indicated an inverse relationship to the viscosities, but the surface tensions were similar for all the formulations.

The highly pseudoplastic Fu‐XLV atomized into the least wide drop size spectrum. The Newtonian formulation of DFB, on the other hand, atomized into the widest drop spectrum; and the moderately pseudoplastic Thu‐48LV, into an intermediate drop spectrum. Thus viscosity and volatility were more important factors in liquid atomization and drop deposition, than surface tension. Among the three meteorological factors measured, relative humidity appeared more important in drop deposition than did wind speed and temperature, within the range measured.     

Bioconcentration of metals in the moss Scleropodium purum in the area surrounding a power plant. A geotopographical predictive model for mercury

Samples of the moss Scleropodium purum collected in 1995 and 1997 were used to biomonitor the deposition of metals in the area surrounding a thermal power plant. Significantly higher levels of Cu (p<0.05), Fe (p<0.01), As and Hg (p<0.001) were found in the 1997 samples than in the 1995 samples, due to changes in atmospheric conditions. The influence on bioconcentration of the orientation of the sampling sites relative to the source of emission was studied. It was found that the increase recorded in 1997 generally occurred in the sampling sites in the south east of the study area. Analysis of the effect of distance from the source of emission revealed that the increase in metal levels in 1997 took place close to the power station (10–30 km). Finally, multiple regression analysis was used to construct a model that related different topographical variables to the concentrations of Hg in moss. The model, constructed using the data collected in both sampling periods, included the orientation of the sampling sites relative to the source of emission as well as the height of sampling sites in 1995 and the distance from the emission point in 1997. The model allowed us to determine the extent of the area affected by deposition and to establish the magnitude of deposition.     

Spatial patterns in wet and dry deposition of atmospheric mercury and trace elements in central Illinois,USA

An intensive 1-month atmospheric sampling campaign was conducted concurrently at eight monitoring sites in central Illinois, USA, from June 9 to July 3, 2011 to assess spatial patterns in wet and dry deposition of mercury and other trace elements. Summed wet deposition of mercury ranged from 3.1 to 5.4 μg/m² across sites for the total study period, while summed dry deposition of reactive mercury (gaseous oxidized mercury plus particulate bound mercury) ranged from 0.7 to 1.6 μg/m², with no statistically significant differences found spatially between northern and southern sites. Ratios of summed wet to summed dry mercury deposition across sites ranged from 2.2 to 4.9 indicating that wet deposition of mercury was dominant during the study period. Volume-weighted mean mercury concentrations in precipitation were found to be significantly higher at northern sites, while precipitation depth was significantly higher at southern sites. These results showed that substantial amounts of mercury deposition, especially wet deposition, occurred during the study period relative to typical annual wet deposition levels. Summed wet deposition of anthropogenic trace elements was much higher, compared to summed dry deposition, for sulfur, selenium, and copper, while at some sites summed dry deposition dominated summed wet deposition for lead and zinc. This study highlights that while wet deposition of Hg was dominant during this spring/summer-season study, Hg dry deposition also contributed an important fraction and should be considered for implementation in future Hg deposition monitoring studies.     

Long-term changes in pH of forest soils in southern Sweden

Changes in pH in 22 forest soils (Fagus, Carpinus, Quercus, Picea) and one Calluna health from southern Sweden were examined in 1984 by repeating studies originally made in 1949-1970. The topsoil had become more acid in 1984 with pH decreases in the old profiles of more than 1.0 in less acid soils and of 0.5 in acid soils. Younger profiles also showed pH decreases, although of a smaller magnitude. Soil pH had, on the whole, declined, and acid deposition is probably a main contributor. Acidification has also occurred in deeper horizons, most markedly in 30-35-year-old horizons. Podsols had largest pH decreases in deeper horizons, and grey-brown soils in the upper profile.     

Measurements of surface contamination of spray equipment with pesticides after various methods of application

A traditional method to determine operator dermal exposure is to quantify the amount of pesticide coming into contact with specific body regions and then to integrate the deposition density values with the total body surface. It is known that extremely high deposition values may occur in the hand region; however, the source of contamination is generally assumed to be direct splash or contact with the pesticide container. One of the parameters affecting operator/pilot exposure could be the transfer of pesticide residue, particularly in the case of pesticides with a longer half-life, from contaminated surfaces of spray equipment by direct contact over extended periods. If the rate of skin absorption of pesticide is readily known, the expected values of daily dose for an operator or pilot may significantly rise due to the extended contact period. This study produced field data on the surface contamination of spray equipment used for ground and aerial applications. If field data on precise work practice (time-motion) observations are incorporated, it may be possible to estimate the potential exposure of operator/pilot due to hand contact with contaminated surfaces.     

Influence of surfactants and polymeric adjuvants on physicochemical properties, droplet size spectra and deposition of fenitrothion and Bacillus thuringiensis formulations under laboratory conditions

The effect of two surfactants and two polymeric adjuvants on droplet size spectra and deposition patterns of nine spray formulations was investigated following atomization in a laboratory chamber using a spinning disc atomizer that can produce a narrow droplet size spectrum. Spray droplets were sampled using Kromekote cards and deposit recoveries were examined on glass plates. Physicochemical properties studied were: viscosity-shear rate relationship, surface tension, volatility, pH, conductance, electrophoretic mobility and zeta potential. Formulations containing low surfactant concentrations provided Newtonian liquids with low viscosities. These liquids atomized into small droplets and provided low recoveries of spray deposits on sampling units. However, formulations containing polymeric adjuvants, and a high concentration of a non-ionic surfactant provided pseudoplastic liquids with high viscosities. These formulations resulted in large droplets with high recoveries of spray deposits on sampling units. Among the physicochemical properties studied, viscosity, surface tension, volatility and electrophoretic mobility, played important roles on liquid atomization and droplet deposition.     

Bioconcentration of metals in the moss Scleropodium purum in the area surrounding a power plant: A geotopographical predictive model for mercury

Samples of the moss Scleropodium purum collected in 1995 and 1997 were used to biomonitor the deposition of metals in the area surrounding a thermal power plant. Significantly higher levels of Cu (p<0.05), Fe (p<0.01), As and Hg (p<0.001) were found in the 1997 samples than in the 1995 samples, due to changes in atmospheric conditions. The influence on bioconcentration of the orientation of the sampling sites relative to the source of emission was studied. It was found that the increase recorded in 1997 generally occurred in the sampling sites in the south east of the study area. Analysis of the effect of distance from the source of emission revealed that the increase in metal levels in 1997 took place close to the power station (10–30 km). Finally, multiple regression analysis was used to construct a model that related different topographical variables to the concentrations of Hg in moss. The model, constructed using the data collected in both sampling periods, included the orientation of the sampling sites relative to the source of emission as well as the height of sampling sites in 1995 and the distance from the emission point in 1997. The model allowed us to determine the extent of the area affected by deposition and to establish the magnitude of deposition.     

Trends in atmospheric ammonium concentrations in relation to atmospheric sulfate and local agriculture

Ammonium (NH(4)(+)) concentrations in air and precipitation at the Institute of Ecosystem Studies (IES) in southeastern New York, USA declined over an 11-year period from 1988 to 1999, but increased from 1999 to 2001. These trends in particulate NH(4)(+) correlated well with trends in particulate SO(4)(2-) over the 1988-2001 period. The NH(4)(+) trends were not as well correlated with local cattle and milk production, which declined continuously throughout the period. This suggests that regional transport of SO(4)(2-) may have a greater impact on concentrations of NH(4)(+) and subsequent deposition than local agricultural emissions of NH(3). Ammonium concentrations in precipitation correlated significantly with precipitation SO(4)(2-) concentrations for the 1984-2001 period although NH(4)(+) in precipitation increased after 1999 and SO(4)(2-) in precipitation continued to decline after 1999. The correlation between NH(4)(+) and SO(4)(2-) was stronger for particulates than for precipitation. Particulate NH(4)(+) concentrations were also correlated with particulate SO(4)(2-) concentrations at 31 of 35 eastern U.S. CASTNet sites that had at least 10 years of data. Air concentrations of NH(4)(+) and SO(4)(2-) were more strongly correlated at the sites that were located within an agricultural landscape than in forested sites. At most of the sites there was either no trend or a decrease in NH(4)(+) dry deposition during the 1988-2001 period. The sites that showed an increasing trend in NH(4)(+) dry deposition were generally located in the southeastern U.S. The results of this study suggest that, in the northeastern U.S., air concentrations of NH(4)(+) and subsequent deposition may be more closely linked to SO(4)(2-) and thus SO(2) emissions than with NH(3) emissions. These results also suggest that reductions in S emissions have reduced NH(4)(+) transport to and NH(4)(+)-N deposition in the Northeast.     

Measurements of surface contamination of spray equipment with pesticides after various methods of application

Abstract

A traditional method to determine operator dermal exposure is to quantify the amount of pesticide coming into contact with specific body regions and then to integrate the deposition density values with the total body surface. It is known that extremely high deposition values may occur in the hand region; however, the source of contamination is generally assumed to be direct splash or contact with the pesticide container. One of the parameters affecting operator/pilot exposure could be the transfer of pesticide residue, particularly in the case of pesticides with a longer half‐life, from contaminated surfaces of spray equipment by direct contact over extended periods. If the rate of skin absorption of pesticide is readily known, the expected values of daily dose for an operator or pilot may significantly rise due to the extended contact period. This study produced field data on the surface contamination of spray equipment used for ground and aerial applications. If field data on precise work practice (time‐motion) observations are incorporated, it may be possible to estimate the potential exposure of operator/pilot due to hand contact with contaminated surfaces.     

Droplet trajectories and deposition with an airblast forestry sprayer

Abstract

The characteristics of the air pattern and spray droplet trajectories from the Algonquin airblast forestry sprayer were investigated. An experiment with water and Rhodamine tracer dye was conducted in a shelterwood location to evaluate droplet deposition on Kromekote^® card targets above and within a canopy of poplar saplings. Computer simulation of a free jet was used to model the airblast in order to investigate droplet trajectories. Measured deposits indicated that the effective swath width is 14 m from the blower outlet. Mean simulated droplet trajectory data were in good agreement with the droplet density data observed in the field. Both sets of results predicted a very low level of spray deposition beyond 14 m.     

Observations of mercury wet deposition in Mexico

We provide a longer-term record of Hg wet deposition at two tropical latitude monitoring sites in Mexico, selected to provide regionally representative data. Weekly wet deposition samples were collected over 2 years, from September 2003 to November 2005. Based on this data set, we discuss the magnitude and seasonal variation of Hg in wet deposition and compare the results to other measurement sites and to several model estimates. With precipitation-weighted mean (PWM) concentrations of 8.2 and 7.9 ng L^?1, respectively, during the sampling period from Sep 30 2003 to Oct 11 2005, and median weekly concentrations of 9.4?±?1 ng L^?1 for both sites, the wet Hg concentrations and deposition at HD01 were much lower than those observed at the US Gulf Coast MDN sites while the wet Hg deposition at OA02 was much lower than most MDN sites, but somewhat similar to US MDN sites along the Pacific Coast. Based on the limited available data, we conclude that the approximately 30 % higher average precipitation at HD01 and roughly equal PWM concentrations lead to the higher deposition at HD01 versus OA02. We believe that these observations may offer scientists and modelers additional understanding of the depositional fluxes in the lower latitudes of North America.     

Wet deposition of mercury in the U.S. and Canada, 1996–2005: Results and analysis of the NADP mercury deposition network (MDN)

One of the most critical measurements needed to understand the biogeochemical cycle of mercury, and to verify atmospheric models, is the rate of mercury wet-deposition. The Mercury Deposition Network (MDN) operates sites across North America to monitor total mercury in wet-deposition. MDN's primary goal is to provide both spatial and temporal continental-scale observations of mercury wet-deposition fluxes to support researchers, modelers, policy-makers and the public interest. MDN represents the only continental-scale mercury deposition database with a >10-year record of continuous values. This study provides analysis and interpretation of MDN observations at 10 years (1996–2005) with an emphasis on investigating whether rigorous, statistically-significant temporal trends and spatial patterns were present and where they occurred. Wet deposition of mercury ranges from more than 25 μg m^?2 yr in south Florida to less than 3 μg m^?2 yr in northern California. Volume-weighted total mercury concentrations are statistically different between defined regions overall (Southeast ≈ Midwest > Ohio River > Northeast), with the highest in Florida, Minnesota, and several Southwest locations (10–16 ng L^?1). Total mercury wet-deposition is significantly different between defined regions (Southeast > Ohio River > Midwest > Northeast). Mercury deposition is strongly seasonal in eastern North America. The average mercury concentration is about two times higher in summer than in winter, and the average deposition is approximately more than three times greater in summer than in winter. Forty-eight sites with validated datasets of five years or more were tested for trends using the non-parametric seasonal Kendall trend test. Significant decreasing mercury wet-deposition concentration trends were found at about half of the sites, particularly across Pennsylvania and extending up through the Northeast.