Dust explosion hazard assessment

The majority of powders that are used in the processing industries are combustible (also referred to as flammable, explosible). An explosion will occur if the concentration of the combustible dust that is suspended in air is sufficient to propagate flame when ignited by a sufficiently energetic ignition source.A systematic approach to identifying dust cloud explosion safety against their consequences generally involves:-Identification of locations where combustible dust cloud atmospheres could be present-Understanding of the explosion characteristics of the dust(s)-Identification of potential ignition sources that could be present under normal and abnormal conditions-Proper process and facility design to eliminate and/or minimize the occurrence of dust explosions and protect people and facilities against their consequences-Adequate maintenance of facilities to prevent ignition sources and minimize dust releaseThis presentation will discuss the conditions that are required for dust cloud explosions to occur and presents a well-tried approach to identify, assess, and eliminate/control dust explosion hazards in facilities.     

Analysis on research trends with dust explosions by bibliometric approach

Highly destructive combustible dust explosions, which is prone to cause secondary explosion, has been a concern in industrial processes. To understand the current development and status of research on dust explosions, 1276 publications related to dust explosions from 1998 to 2021 were indexed through the Web of Science Core Collection database. CiteSpace and VOSviewer were used to visualize and analyze the collected literature information. The number of articles related to dust explosions has increased from 12 in 1998 to 191 in 2021. China, the United States, and Canada are the major contributors in this field. Dalhousie University, Beijing Institute of Technology, and Dalian University of Technology are at the core of dust explosion research. Wei Gao, Paul Amyotte, and Chi-Min Shu are the most prolific researchers. Journal of Loss Prevention in the Process Industries, Powder Technology, and Process Safety and Environmental Protection are the major sources of publications related to dust explosions. The research topic of dust explosions mainly evolves into four aspects: explosion characteristics and influencing factors, research media, explosion suppression, and numerical simulation. New research hotspots have appeared related to gas–dust hybrid mixtures, nanomaterials, and powder suppressants. The results can help researchers in the dust explosion field to quickly determine the research frontier and the overall situation.     

油页岩含氧干馏工艺流程爆炸极限分析

根据干馏工艺流程配入适量氧气,可以降低载热气体需要预热的温度,以实现低能耗、易于工业生产的特点,设计了一套新型的有氧干馏工艺流程。有氧干馏工艺因其过程中存在可燃性混合物,有发生爆炸事故的可能性,通过实验对所收集的不同温度下的干馏气体的成分与含量进行了分析,结合爆炸极限理论,对该有氧干馏工艺流程的不同温度、不同惰性气体含量条件下可燃气体爆炸极限进行了分析计算。结果表明,可燃气体的浓度在整个反应升温过程中始终没有进入爆炸危险区域,说明该实验装置不具备爆炸危险性;对干馏工艺流程中氧气的输入量的控制,可以防止该工艺流程的火灾爆炸的发生。     

Gas explosions caused by gasification of condensed phase combustibles

For reasonable explanation about recent accidental gas explosions caused by condensed phase combustibles occurred in Japan, the processes of such gas explosions have been investigated. When the combustible is of condensed phase at its initial state, gasification is necessary to form a flammable mixture causing a gas explosion. The process of gasification characterizes such a gas explosion. When the combustible is RDF (refuse derived fuel), the temperature was inferred to spontaneously increase. Also, the flammable gas should be generated within a confined high temperature region in the pile and come through a low temperature layer without combustion. The growth of a flammable layer after gasoline is spread over floor is analytically evaluated. The flame propagation through the flammable layer established over the floor enhances the pressure enough to break the structure of the office. Long-term heating is inferred to cause ignition of dried garbage, and the mechanism of flammable gas generation would be similar to that in the case of the RDF explosion. For prevention of losses at accidental explosions caused by gasification of condensed phase combustibles, understanding of the phenomena is the most important.     

Lithium-ion energy storage battery explosion incidents

Utility-scale lithium-ion energy storage batteries are being installed at an accelerating rate in many parts of the world. Some of these batteries have experienced troubling fires and explosions. There have been two types of explosions; flammable gas explosions due to gases generated in battery thermal runaways, and electrical arc explosions leading to structural failure of battery electrical enclosures. The thermal runaway gas explosion scenarios, which can be initiated by various electrical faults, can be either prompt ignitions soon after a large flammable gas mixture is formed, or delayed ignitions associated with late entry of air and/or loss of gaseous fire suppression agent. The electrical explosions have entailed inadequate electrical protection to prevent high energy arcs within electrical boxes vulnerable to arc induced high pressures and thermal loads. Estimates of both deflagration pressures and arc explosion pressures are described along with their incident implications.     

Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

Dust explosion incidents and regulations in the United States

The U.S. Chemical Safety and Hazard Investigation Board (CSB) investigated three fatal dust explosions that all occurred in 2003. These explosions caused the deaths of 14 people and injured hundreds more. Two of the facilities were damaged beyond repair, and several hundred employees lost their jobs.

CSB's investigations revealed that the explosions had common causes, despite their geographic and industrial diversity. Consequently, CSB commissioned a study of combustible dust fire and explosion hazards. This paper presents a summary of CSB's findings and recommendations developed during that study.     

Effect of superfine KHCO3 and ABC powder on ignition sensitivity of PMMA dust layer

In order to evaluate the flame-retardant capacity of KHCO₃ and ABC on the ignition of PMMA dust layer accumulation on hot surfaces, the ignition time and critical heating temperature of PMMA/KHCO₃ and PMMA/ABC dust layer were experimentally investigated. The thermal stability of the mixed dust, the condensed phase products and gas phase products of the mixed dust combustion were analyzed to reveal the flame-retardant mechanism. The ignition time of 30 μm PMMA was obviously longer than that of 5 μm PMMA, and the critical heating temperature was close to that of 5 μm PMMA. KHCO₃ and ABC could greatly extend the ignition time of the PMMA dust layer and increase the critical heating temperature of the dust layer. ABC was more effective than KHCO₃. The decomposition of KHCO₃ and ABC absorbed the heat and inhibits the pyrolysis of PMMA. The HPO₃ and P₂O₅ generated by the decomposition of ABC would cover the surface of PMMA aggregates or particles and act as a physical barrier. The main light combustible gas produced by PMMA pyrolysis were CO and C₂H₄. The CO₂ generated during the decomposition of KHCO₃ could dilute the combustible gas in the ambient to inhibit the combustion of PMMA.     

Detailed analysis of flame propagation during dust explosions by UV band observations

It is important to sufficiently understand the phenomena during the dust explosions in order to take appropriate measures preventing dust explosion accidents. However, at present basic knowledge on flame propagation mechanisms during dust explosions is not enough. In this study, therefore, the flame propagation mechanisms during dust explosions are examined by detailed analyses using a special observation at UV band. Small scale experiments were performed to analyze flame propagating processes in detail. In the experiments, the stearic acid was used as the combustible particle, suspended particles were ignited by an electric spark, and flame propagation through the combustible dust was observed by using a special observation system at UV band. The leading combustion zone is observed to consist of discrete burning blue spot flames by the observation using ordinary photograph system. It is questionable how the leading flame of such discrete structure propagates. In this study, high-speed video images at UV band through a band-pass filter were taken to detect OH emission from combustion reaction zone. Using this method, the propagating flame could be detected clearly and the flame propagation mechanism could be examined in detail. In the conditions performed in this study, discrete flame propagation was not observed and the leading flame was observed to propagate continuously. This result is of importance for understanding the flame propagation phenomena during dust explosion.     

A review on hybrid mixture explosions: Safety parameters,explosion regimes and criteria,flame characteristics

The hybrid mixture of combustible dusts and flammable gases/vapours widely exist in various industries, including mining, petrochemical, metallurgical, textile and pharmaceutical. It may pose a higher explosion risk than gas/vapor or dust/mist explosions since the hybrid explosions can still be initiated even though both the gas and the dust concentration are lower than their lower explosion limit (LEL) values. Understanding the explosion threat of hybrid mixtures not only contributes to the inherent safety and sustainability of industrial process design, but promotes the efficiency of loss prevention and mitigation. To date, however, there is no test standard with reliable explosion criteria available to determine the safety parameters of all types of hybrid mixture explosions, nor the flame propagation and quenching mechanism or theoretical explanation behind these parameters. This review presents a state-of-the-art overview of the comprehensive understanding of hybrid mixture explosions mainly in an experimental study level; thereby, the main limitations and challenges to be faced are explored. The discussed main contents include the experimental measurement for the safety parameters of hybrid mixtures (i.e., explosion sensitivity and severity parameters) via typical test apparatuses, explosion regime and criterion of hybrid mixtures, the detailed flame propagation/quenching characteristics behind the explosion severities/sensitivities of hybrid mixtures. This work aims to summarize the essential basics of experimental studies, and to provide the perspectives based on the current research gaps to understand the explosion hazards of hybrid mixtures in-depth.     

民居内燃气泄漏爆炸特性及其数值仿真研究进展

为研究民居内可燃气体爆炸规律及特点,预防燃气泄漏爆炸案/事件发生,提高案/事件现场勘验与侦破效率,综述受限空间内燃气爆炸的形成机理和传播特性、现场结构和障碍物对爆炸的影响规律以及爆炸后现场勘验和重建技术方法,阐述数值仿真技术在气体爆炸案件现场勘验和重建中发挥的作用。研究结果表明：民居内燃气爆炸现场特征明显异于传统爆炸类案件现场,尤其是炸点特征存在差异;数值仿真可有效揭示燃气泄漏爆炸的形成、传播和作用机理;目前,燃气爆炸实验研究方法和体系需进一步统一,以提高研究结论普适性。研究结果可为民居内燃气爆炸现场勘验和重建提供技术支持。     

Experimental study on the minimum explosion concentration of anthracite dust: The roles of O2 mole fraction,inert gas and CH4 addition

The explosion characteristics of anthracite coal dust with/without small amount of CH₄ (1.14 vol %) were investigated by using a 20 L spherical explosion apparatus with an emphasis on the roles of oxygen mole fraction and inert gas. Two methods based on overpressure and combustion duration time were used to determine the minimum explosion concentration (MEC) or the lower explosion limit (LEL) of the pure anthracite coal dust and the hybrid coal-methane mixtures, respectively. The experiment results showed that increasing oxygen mole fraction increases the explosion risk of coal dust: with increasing oxygen mole fraction, the explosion pressure (P_ex) and the rate of explosion pressure rise ((dp/dt)_ex)) increase, while MEC decreases. The explosion risk of anthracite dust was found to be lower after replacing N₂ with CO₂, suggesting that CO₂ has a better inhibition effect on explosion mainly due to its higher specific heat. However, the addition of 1.14% CH₄ moderates the inhibition effect of CO₂ and the promotion effect of O₂ on anthracite dust explosion for some extent, increasing explosion severity and reducing the MEC of anthracite dust. For hybrid anthracite/CH₄ mixture explosions, Barknecht's curve was found to be more accurate and conservative than Chatelier's line, but neither are sufficient from the safety considerations. The experimental results provide a certain help for the explosion prevention and suppression in carbonaceous dust industries.     

多元可燃气体爆炸极限理论预测模型研究*

为准确掌握和预测多元可燃气体的爆炸极限,开展2种多元可燃气体爆炸极限的理论预测模型研究。第1种模型针对“多种可燃气体+多种惰性气体”在空气中或氧气中混合,基于求解可燃气体绝热火焰温度的总比热特性方法以及化学平衡反应中的贫燃料(富氧)反应,提出该多元可燃气体的爆炸下限预测模型;第2种模型针对“可燃气体+惰性气体+氧气”混合,基于热平衡方程及混合气体的各组分浓度、淬灭电势及燃烧潜热,提出该多元可燃气体的爆炸极限预测模型。结果表明:在预测多元可燃气体的爆炸极限时,第1种模型具有较广泛的应用性,且表现出较高的准确度;第2种模型具有使用简单的特点,且扩展了LCR（勒夏特列原理）的应用范围。     

Correlations for blast effects from vented dust explosions

Empirical correlations are often used to estimate safety distances in the event of dust explosions. In Europe, there are two main correlations available in VDI 3673 and EN 14491. Whereas the VDI 3673 correlation is based on experimental investigations of vented dust explosions using large vessels, and assumes an external explosion, the EN 14491 correlation is derived from SKJELTORP et al. internal explosion tests in ammunition storage facility. This paper provides an overview of the experimental studies of vented gas and dust explosion. It aims to highlight the main findings of such studies, while defining the conditions for a secondary explosion to occur and comparing experimental data with the application of standards, in order to propose elements to choose the more appropriate correlation.     

Experiments on the influence of pre-ignition turbulence on vented gas and dust explosions

Experiments were performed on the influence of pre-ignition turbulence on the course of vented gas and dust explosions. A vertical cylindrical explosion chamber of approximately 100 l volume and a length-to-diameter ratio (l/d) of 4.7 consisting of a steel bottom segment and three glass sections connected by steel flanges was used to perform the experiments. Sixteen small fans evenly distributed within the chamber produced turbulent fluctuations from 0 to 0.45 m/s. A Laser-Doppler-anemometer (LDA) was used to measure the flow and turbulence fields. During the experiments the pressure and in the case of dust explosions the dust concentration were measured. In addition, the flame propagation was observed by a high-speed video camera. A propane/nitrogen/oxygen mixture was used for the gas explosion experiments, while the dust explosions were produced by a cornstarch/air mixture.It turned out that the reduced explosion pressure increased with increasing turbulence intensity. This effect was most pronounced for small vents with low activation pressures, e.g. for bursting disks made from polyethylene foil. In this case, the overpressure at an initial turbulence of 0.45 m/s was twice that for zero initial turbulence.     

Experimental investigation on explosion flame propagation of wood dust in a semi-closed tube

In order to explore flame propagation characteristics during wood dust explosions in a semi-closed tube, a high-speed camera, a thermal infrared imaging device and a pressure sensor were used in the study. Poplar dusts with different particle size distributions (0–50, 50–96 and 96–180 μm) were respectively placed in a Hartmann tube to mimic dust cloud explosions, and flame propagation behaviors such as flame propagation velocity, flame temperature and explosion pressure were detected and analyzed. According to the changes of flame shapes, flame propagations in wood dust explosions were divided into three stages including ignition, vertical propagation and free diffusion. Flame propagations for the two smaller particles were dominated by homogeneous combustion, while flame propagation for the largest particles was controlled by heterogeneous combustion, which had been confirmed by individual Damköhler number. All flame propagation velocities for different groups of wood particles in dust explosions were increased at first and then decreased with the augmentation of mass concentration. Flame temperatures and explosion pressures were almost similarly changed. Dust explosions in 50–96 μm wood particles were more intense than in the other two particles, of which the most severe explosion appeared at a mass concentration of 750 g/m³. Meanwhile, flame propagation velocity, flame propagation temperature and explosion pressure reached to the maximum values of 10.45 m/s, 1373 °C and 0.41 MPa. In addition, sensitive concentrations corresponding to the three groups of particles from small to large were 500, 750 and 1000 g/m³, separately, indicating that sensitive concentration in dust explosions of wood particles was elevated with the increase of particle size. Taken together, the finding demonstrated that particle size and mass concentration of wood dusts affected the occurrence and severity of dust explosions, which could provide guidance and reference for the identification, assessment and industrial safety management of wood dust explosions.     

Large-scale dust explosions in vessel-pipe systems

This study investigates dust explosions in vessel-pipe systems to develop a better understanding of dust flame propagation between interconnected vessels and implications for the proper application of explosion isolation systems. Cornstarch dust explosions were conducted in a large-scale setup consisting of a vented 8-m³ vessel and an attached pipe with a diameter of 0.4 m and a length of 9.8 m. The ignition location and effective dust reactivity were varied between experiments. The experimental results are compared against previous experiments with initially quiescent propane-air mixtures, demonstrating a significantly higher reactivity of the dust explosions due to elevated initial turbulence, leading to higher peak pressures and faster flame propagation. In addition, a physics-based model developed previously to predict gas explosion dynamics in vessel-pipe systems was extended for dust combustion. The model successfully predicts the pressure transients and flame progress recorded in the experiments and captures the effects of ignition location and effective dust reactivity.     

多元可燃性气体爆炸压力与中间产物发射光谱特性的耦合研究

工业生产中爆炸事故往往是由多元可燃气体与空气混合后遇到明火而引起的，为研究乙烷（C₂H₆）、乙烯（C₂H₄）、一氧化碳（CO）、氢气（H₂）对甲烷爆炸特性的影响，选取多组分可燃气体甲烷爆炸压力特性和自由基发射光谱的影响进行研究，利用陕西省工业过程安全与应急救援工程技术研究中心重点实验室搭建的多功能球形气体/粉尘爆炸实验装置和单色仪进行爆炸实验测试，同步采集时间—压力曲线、中间产物（OH，CH₂O）的发射光谱信号，考察多组分可燃气体浓度对甲烷爆炸压力特性和中间产物的影响。结果表明:在富氧状态下，多组分可燃气体加剧了甲烷—空气混合体系的爆炸剧烈程度，随着体系中氧气含量的减少、由富氧状态变为贫氧状态、促进作用逐渐减弱转变为阻尼作用，爆炸压力特性与中间产物发射光谱参数的影响规律基本保持一致，均呈高度正相关；多元混合体系爆炸剧烈程度越大，自由基发射光谱达到峰值的速度越快，自由基更早、更快的积累是加剧爆炸程度的原因之一。     

A correlation of the lower flammability limit for hybrid mixtures

Hybrid mixtures are widely encountered in industries such as coal mines, paint factories, pharmaceutical industries, or grain elevators. Hybrid mixtures explosions involving dust and gas can cause great loss of lives and properties. The lower flammability limit (LFL) is a critical parameter when conducting a hazard assessment or developing mitigation methods for processes involving hybrid mixtures. Unlike unitary dust or gas explosions, which have been widely studied in past decades, only minimal research focuses on hybrid mixtures, and data concerning hybrid mixtures can rarely be found. Although methods to predict the LFL have been developed by using either Le Chatelier's Law, which was initially proposed for homogeneous gas mixtures, or the Bartknecht curve, which was adopted for only certain hybrid mixtures, significant deviations still remain. A more accurate correlation to predict an LFL for a hybrid mixtures explosion is necessary for risk assessment. This work focuses on the study of hybrid mixtures explosions in a 36 L dust explosion apparatus including mixtures of methane/niacin, methane/cornstarch, ethane/niacin and ethylene/niacin in air. By utilizing basic characteristics of unitary dust or gas explosions, a new formula is proposed to improve the prediction of the LFL of the mixture. The new formula is consistent with Le Chatelier's Law.     

氧气瓶内附油脂充氧过程爆炸分析与计算

分析总结了氧气钢瓶物理爆炸和化学爆炸的原因。针对2009年某市发生的一起氧气瓶内含油脂爆炸事故,系统分析了国内曾经发生的几次因油脂导致气瓶爆炸事故。油脂进入到氧气瓶内大都是由于误操作。油脂与高压纯氧接触会发生剧烈的自燃氧化放热,使瓶内的氧气迅速升温升压,超出气瓶承压极限导致爆炸破裂。分析比较发现由油脂导致的气瓶爆炸,其破坏程度不如混入可燃气体导致的气瓶爆炸剧烈,一般不是粉碎性爆炸。在正常的充氧过程中,氧气瓶温度会升高,采用变质量热力学中的方法,计算说明气瓶在充装过程中氧气温度的具体变化。充氧温度计算为充氧工作人员提供参考,如发现异常情况,可以及时地控制和预防。由现场压力表可知氧气瓶在充装至12MPa时发生爆炸,而氧气瓶最小爆炸压力为37.6MPa,油脂燃烧放热,计算可知致使钢瓶爆炸破裂所需要的最小油脂量,为66.4-79.6g。不同的充装压力下发生爆炸,所需要的最小油脂量不同,充装压力越高,爆炸所需要的最小油脂量越少。