变频调速控制技术在除尘风机上的应用

介绍了变频调速控制技术的原理、使用方法及应用情况等.     

变频调速控制技术在除尘风机上的应用

介绍了变频调速控制技术的原理，使用方法及应用情况等。     

凡口铅锌矿主井(箕斗井)入风净化实践

介绍了凡口铅锌矿主井(箕斗井)入风净化方案和净化系统及使用情况.     

机械化改造在右江矿务局的推广应用

右江矿务局9对生产矿井已全部成功使用机械化开采方式,本文介绍机械化改造的推广应用情况及存在问题思考     

一种车载长管式压缩空气呼吸器的研制

介绍了一种新型车载正压式压缩空气呼吸器的系统组成、主要技术性能、主要部件设计及试验情况。该车载空气呼吸器具有使用安全可靠、使用时间长的特点。     

凡口铅锌矿主井（箕斗井）入风净化实践

介绍了凡口铅锌矿主井（箕斗井）入风净化方案和净化系统及使用情况。     

袋式除尘器在化肥厂的应用及改进

对建峰化肥厂包装系统中所使用的袋式除尘器的工作原理、结构性能作了介绍,并对运行情况和改进情况进行了总结,对存在的问题进行了分析,提出了今后改造应注意的问题。     

人机界面在大型除尘系统控制中的应用

介绍了人机界面在大型脉冲袋式除尘系统控制中的一个应用实例,从实际使用情况看,人机界面在大型脉冲袋式除尘系统控制中的应用是成功的。     

框构桥裂缝产生的原因及结构安全性分析

本文首先介绍了框架桥的应用情况,指出框架桥结构是铁路提速后,大规模使用的一种下穿结构形式。进而介绍了由于设计、施工等几种常见的可能引起框架桥产生裂缝的原因,并以京九线某里程段的二孔框架桥出现裂缝情况为例分析了其出现裂缝的原因及裂缝的危害性。     

一起有机热载体劣化的原因分析及处理措施

本文简要介绍了某使用单位一起有机热载体的劣化情况,针对该有机热载体的劣化现象,结合使用单位的现场状况和日常管理情况,从多方面对引起有机热载体劣化的原因进行了详细分析,并提出了相应的处理及防范措施,以促进有机热载体锅炉及系统安全、经济运行,进而达到节能、环保的要求。     

Dynamics of dust dispersion from the layer behind the propagating shock wave

The aim of the research was to investigate experimentally the process of dust lifting from a layer. The delay in lifting the dust from the layer behind the propagating shock wave and the vertical velocity of the dust cloud were calculated from the dust concentration measurements. Quantitative relations between those measurements and the parameters of the gas flow are presented. The results were compared with those obtained from the analysis of the frame pictures of the process. The pictures were made by using a high-speed camera working together with a Schlieren system. The measurements of the dust concentration behind the propagating shock wave are presented and analysed.The research was carried out for two selected dusts: black coal dust and silicon dust, and for different initial conditions: three shock wave velocities: 450, 490 and 518 m/s and three dust layer thickness equal to 0.1, 0.4 and 0.8 mm. Measurement results of the mean vertical component of dust cloud velocity between the layer and the first laser beam will be used in a new model, where the dust dispersing process is modelled as an injection of the dust from the layer. The dust concentration measurements will be very useful for validation of the model.     

木粉尘职业接触极限值的研究

木头作为原材料得到广泛应用 ,但硬木粉尘 (如橡木和山毛榉粉尘 )可导致人患鼻癌。不同国家的木粉尘的职业接触极限值 (或极限值 )却不尽相同。虽然关于木粉尘的极限值的国际讨论持续已久 ,但仍缺乏更好支持其极限值推导的健康相关数据。为保护木材加工工人的身体健康以及给木粉尘的职业接触极限值的制定机构提供可靠数据和科学决策方面的建议 ,笔者针对怎样为木粉尘 ,特别是致癌木粉尘制定一个合理极限值的问题 ,在“比较”和“设定”两方面对国际范围内的木粉尘的极限值进行了研究 ,其结果表明 ,大部分国家给予软木粉尘和硬木粉尘的极限值分别为 5mg/m3 和 1mg/m3 ;提出利用剂量 -影响 -关系和“线性多阶段”方法也可以给致癌硬木粉尘建立一个健康基础极限值或者一个可接受极限值 ,其极限值应该不仅根据木材类型而且还需根据工作岗位而分别综合设定。     

The effectiveness of DustBubbles on dust control in the process of concrete drilling

Construction dust is one of the most concerned pollutants presenting risks to human health. Dust generated from concrete drilling, particularly true for silica dust, have an adverse effect on the health of workers. There is a long-term concern about the overexposure of construction workers to respirable crystalline silica. The high exposure to silica, even over a short period, can lead to silicosis. In order to control the dust generated during the process of concrete drilling, a local Hong Kong contractor has implemented DustBubble during the concrete drilling works. In order to evaluate the effectiveness of this new dust control measure, an experimental study has been designed and conducted. The respirable dust and silica dust concentrations of the following two situations were compared: workers drilling concrete with and without the use of DustBubble. Personal respirable samples were collected and analysed based on NIOSH 0600 and 7500 methods. The results revealed that DustBubble could significantly reduce the respirable dust exposure by 63%. However, there was no evidence that the use of DustBubble could reduce the respirable quartz exposure.     

浓度对橡胶粉尘爆炸特性的影响

为了解橡胶粉尘的爆炸危险性,采用20 L球爆炸测试装置对常温常压下、粒径75μm以下的橡胶粉尘在质量浓度50~700 g/m3范围内的爆炸特性进行试验研究,测定其最大爆炸压力及爆炸指数随质量浓度的变化规律,进而对其爆炸危险性程度进行分级。结果表明:橡胶粉尘质量浓度为300 g/m3时,爆炸压力达到最大值0.49MPa;在橡胶粉尘质量浓度为250 g/m3时,爆炸指数达到最大值5.04MPa·m/s,根据ISO 6184粉尘爆炸烈度等级分级标准,其粉尘爆炸危险性分级为St-1级。     

输煤巷道通风排尘特征参数数值模拟优化研究

针对输煤巷道煤炭运输过程中煤尘污染问题,利用数值模拟的方法,对不同风速下的煤尘颗粒运移规律、巷道底板沉积煤尘粒子扬尘规律进行模拟。通过对两种模拟结果进行对比分析,确定在一般干燥巷道中排尘风速以1.5～2.7 m/s为宜,既有利于粒径小于24μm的煤尘颗粒排出井外,也有利于粒径大于24μm的煤尘颗粒沉降;并且风速+带速不超过4m/s为宜,可以把粒径小于30μm的煤尘颗粒排出井外,很好地起到风流稀释作用。并与现场实测结果进行对比,结论基本一致。     

戊唑醇粉尘最小点火能试验研究

采用1.2 L哈特曼管爆炸装置分别对粒径小于54μm、74μm、150μm及大于150μm的戊唑醇粉尘进行测试。针对戊唑醇粉尘浓度及粒径范围对其最小点火能的影响,分别进行单因素试验,并对其危险性进行分级。结果表明,保持粒径小于150μm,环境温度为20℃,喷粉压力为0.7 MPa,在质量浓度100~1 300 g/m~3之间,戊唑醇粉尘的最佳敏感质量浓度ρ_m为983.71 g/m~3,此时的最小点火能为404.74 mJ。保持戊唑醇粉尘质量浓度为900 g/m~3,环境温度为20℃,喷粉压力为0.7 MPa不变,粒径小于54μm、74μm、150μm及大于150μm的戊唑醇粉尘的最小点火能分别为10 mJ、100 mJ、400 mJ和1 000 mJ以上。因此,判定戊唑醇粉尘最小点火能属于M2级,为特别着火敏感性。     

Investigations into the influence of dustiness on dust explosions

A new safety characteristic the “dustiness” according to VDI 2263 – part 9 (Verein Deutscher Ingenieure, 2008) is investigated. Dustiness means the tendency of a dust to form clouds. The paper deals with the influence of the dustiness on vented dust explosions. In order to look into the effects of the dustiness on dust cloud formation and explosion properties experiments and simulations in a vertical dust dispersion glass tube apparatus were carried out.Preliminary explosion experiments showed that the dustiness has an influence on the reduced explosion pressure in a vented 75 L test apparatus. Dusts with comparable p_max and K_St values and different dustiness were tested. Dusts with higher dustiness produced higher overpressures, despite comparable safety characteristics. In order to verify the results for applications in the process industries further tests with different settings are planned as well as industrial scale experiments. Characteristics of the dust such as particle size, density, specific surface area and particle shape, which influence the dispersibility, have been determined experimentally.The Euler/Lagrange and the Euler/Euler approaches are compared for simulating an exemplary dust/air mixture. Especially sedimentation and the ability of the approaches to simulate the tendency of dust to stay airborne were investigated. The Euler/Lagrange approach is better suited for simulating local dust concentrations, particle size distributions and particle forces. It could be used to point out regions of high dust concentrations in a vessel. With the Euler/Euler method it is possible to achieve fast solutions for one specified diameter, but the simulated dust/air mixtures are always more homogenous than in reality. ANSYS CFX version 13 was used in all simulations.     

不同挥发分煤尘层最低着火温度变化规律研究

针对煤化工等行业的沉积煤尘热自燃问题,运用煤尘层最低着火温度测试系统,研究了不同挥发分煤尘层的着火状态、不同挥发分及不同厚度煤尘层最低着火温度的变化规律。结果表明:煤尘层厚度为5 mm时,挥发分质量分数大于35%的煤尘在较低温度便出现着火现象,肉眼很容易观察到火星的出现,温度曲线波动剧烈,而对于挥发分质量分数小于15%的煤尘,通过煤尘层内部"温度达到450℃"来判断其着火;在灰分质量分数相当的情况下,煤尘层最低着火温度随挥发分增加呈严格递减的趋势变化;得到了煤尘层厚度和最低着火温度的函数关系式,通过试验得到了挥发分质量分数为37.45%煤尘的重要常数M和N。     

Study of dust cloud behaviour in the modified Hartmann tube using the image subtraction method (ISM)

A dispersion of fine particles in the air is needed for a dust explosion to occur since an explosion is the fast combustion of particles in the air. When particles are poorly dispersed, agglomerated, or their concentration is low, the combustion velocity decreases, and deflagration would not occur. The combustion rate is strictly related to dust concentration. Therefore, the maximum explosion pressure rise occurs at dust concentration close to stoichiometric. Conversely, Minimum Explosion Concentration (MEC) is the lower limit at which self-sustained combustion and a pressure rise are possible. Dust explosion tests are designed to reproduce the dispersion and generation of dust clouds in industrial ambiences by using dispersion devices activated by pressurised air pulses. The resulting dust cloud, which has a marked transient character, is considered representative of real clouds by current standards. Over time, several studies have been carried out to optimise these devices (e.g. to reduce the inhomogeneity of the cloud in the 20 L sphere). The Minimum Ignition Energy (MIE) of dust is measured using the Mike3 modified Hartmann tube, where the ignition attempt is made 60–180 ms after dust dispersion regardless of dust characteristics.This work investigates the dust clouds’ actual behaviour inside the modified Hartmann tube before ignition using high-velocity video movies and a new image post-treatment method called Image Subtraction Method (ISM). Movies are recorded with high-speed cameras at a framerate of 2000 fps and elaborated with an on-purpose developed LabVIEW® code. Concentration (mass per volume) and dispersion pressure are varied to evaluate their effect on dust clouds. Maise starch, iron powder and silica powder are chosen to investigate the effect of particle density and size on the cloud structure and turbulence. This approach will help to investigate the structure of the dust cloud, the shape and size of the particle lumps and the change in dust concentration over time. In addition, information on the actual concentration and cloud turbulence at the ignition location and delay time were obtained, which may help identify the local turbulence scale and widen the characterisation of the cloud generated in the Hartmann tube.     

苯乙烯丙烯酸共聚物/碳黑混合体系粉尘爆炸特性研究

采用MIE-D1.2型最小点火能测试装置及20 L球型粉尘爆炸测试装置,对苯乙烯丙烯酸共聚物/碳黑混合体系粉尘的爆炸特性进行研究。结果表明,过74μm、58μm、47μm孔径筛的粉尘对静电火花敏感,其最小点火能表征值分别为610 mJ、361 mJ、201 mJ。随粉尘质量浓度增加,最小点火能呈现先减小后增加的规律。随粉尘粒径减小,最小点火能与粉尘质量浓度变化关系曲线向低粉尘质量浓度和低点火能量方向偏移,且对应的最敏感爆炸质量浓度从500 g/m~3降至200 g/m~3。随粉尘质量浓度增加,过147μm、74μm、47μm孔径筛的苯乙烯丙烯酸共聚物/碳黑混合体系粉尘爆炸压力及爆炸压力上升速率呈现先增加后减小趋势。在相同粉尘质量浓度下,中位径小于74μm的苯乙烯丙烯酸共聚物/碳黑混合体系粉尘,粉尘的爆炸压力增幅明显减小。苯乙烯丙烯酸共聚物/碳黑混合体系粉尘爆炸下限质量浓度为25 g/m~3,最大爆炸指数为14.636 MPa·m/s,爆炸危险等级划分为St1。