Heavy metal concentrations in water, suspended matter, and sediment from Gökova Bay, Turkey

The contents of heavy metals (Fe, Mn, Pb, Cu, Cd, and Hg) dissolved in water and suspended solids of Gökova Bay—partly and fully sampled in 2005 and 2006, respectively—are quite higher than the average values encountered in uncontaminated sea water. The high concentrations are associated with terrestrial inputs from the mining zones and anthropogenic (domestic + industrial) sources. Moreover, the distribution of Fe and Cu is affected by primary production because these elements function as nutrients in biological activities. The Cr, Ni, and Fe concentrations of surface sediments are above the shale average. The Cr and Ni contents of surface sediments representative of river mouths strongly correlate with total phosphorus contents. In a sulfide-poor environment, Pb and Cu were concentrated at a higher ratio in surface sediments than Cd, probably due to higher stabilities of their surface complexes with amorphous iron oxides and clay minerals existing as major components in the sediments. The exceptional enrichment of Zn may be attributed to double oxide formation with amorphous iron oxides in sediments. The high metal values are most probably caused by terrestrial inputs from anthropogenic sources and the mining zones at the southeast part of the bay. The Al, Mn, Pb, Cu, Zn, and Hg contents are below the shale average. The low values have possibly originated from the coarse-grained sandy sediments having a low affinity for metals. There are no distinct differences in the metal distributions in water and suspended matter between the years 2005 and 2006 in the bay, probably due to low sedimentation rates.     

Source discrimination of heavy metals in sediment and water of To Lich River in Hanoi City using multivariate statistical approaches

The concentrations of Mn, Fe, Ni, Cr, Cu, Pb, Zn, As, and Cd were determined to evaluate the level of contamination of To Lich River in Hanoi City. All metal concentrations in 0–10-cm water samples, except Mn, were lower than the maximum permitted concentration for irrigation water standard. Meanwhile, concentrations of As, Cd, and Zn in 0–30-cm sediments were likely to have adverse effects on agriculture and aquatic life. Sediment pollution assessment was undertaken using enrichment factor and geoaccumulation index (I _geo). The I _geo results indicated that the sediment was not polluted with Cr, Mn, Fe, and Ni, and the pollution level increased in the order of Cu < Pb < Zn < As < Cd. Meanwhile, significant enrichment was shown for Cd, As, Zn, and Pb. Cluster and principal component analyses suggest that As and Mn in sediment were derived from both lithogenic and anthropogenic sources, while Cu, Pb, Zn, Cr, Cd, and Ni originated from anthropogenic sources such as vehicular fumes for Pb and metallic discharge from industrial sources and fertilizer application for other metals.     

Metallic components of traffic-induced urban aerosol, their spatial variation, and source apportionment

This study proposes a practical method to estimate elemental composition and distribution in order to attribute source and quantify impacts of aerosol particles at an urban region in Kolkata, India. Twelve-hour total particulates were collected in winter (2005–2006) and analyzed by energy-dispersive X-ray fluorescence technique to determine multi-elemental composition, especially trace metals. The aerosols consist of various elements including K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Se, and Pb which exhibit significant concentration at various sites (p?<?0.05). The concentration of different metallic elements were found in the order of Zn ?> ?Pb ?> ?Ni ?> ?Cu ?> ?Cr ?>? Co. Statistical multivariate analysis and correlation matrix analyses were performed for factor identification and consequent source apportionment. Contour profiles demonstrate spatial variation of elemental compositions indicating possible source contribution along with meteorological influences. Spatial differences were clearly most significant for Zn, Ni, Pb, and Cu reflecting the importance of anthropogenic inputs, primarily from automobile sources.     

Evaluation of metal contamination in sediments from north of Morocco: geochemical and statistical approaches

Concentrations of Fe, Mn, Cr, Cu, Ni, Pb, Zn, Cd and Hg were evaluated in surface sediments of two rivers from north of Morocco, known as Souani and Mghogha rivers. Significantly higher concentrations in mg kg^???1 dry weight (dw) of Mn (747.6 vs. 392.9), Cr (86.4 vs. 56.3), Zn (299.5 vs. 138.5) were found in sediment samples from Mghogha when compared with Souani river. Average concentrations of Cd and Hg in several sediment samples from both rivers were above the effect range median that predicts toxic effects to aquatic organisms. The calculation of enrichment factors showed that Mn, Cr, Cu and Ni were depleted, whereas Pb and Hg were enriched. The results of geoaccumulation index revealed that sediments of both rivers were unpolluted with most of the metals and moderately contaminated with Fe and Hg. Some of elevated concentrations of Hg, principally in Mghogha River, were due to anthropogenic sources including the direct discharges of industrial zone.     

Heavy metals partitioning in sediments of the Kabini River in South India

Cu, Cr, Fe, Mn, Ni, Pb, and Zn in the sediments of the Kabini River, Karnataka, India was studied to determine the association of metal with various geochemical phases by sequential extraction. The variations of heavy metal concentration depend on the lithology of the river basin and partly on anthropogenic activities. The Kabini River sediments are dominated by Sargur supracrustals with amphibolites, gneisses, carbonates, and ultrabasic rocks weathering into gneissic and serpentine soils carrying a natural load of cationic heavy metals. The source of heavy metals in the Kabini riverbed sediments is normally envisaged as additional inputs from anthropogenic over and above natural and lithogenic sources. Geochemical study indicates the metals under study were present mostly in the least mobilizable fraction in the overlying water and it is concluded that heavy metals in these sediments are to a great extent derived from multisource anthropogenic inputs besides geochemical background contributions The results show that lead and chromium have higher potential for mobilization from the sediment due to higher concentration at the exchangeable ion and sulfide ion bounded, also Cu and Pb have the greatest percentage of carbonate fraction, it means that the study area received inputs from urban and industrial effluents. Association of the Fe with organic matter fraction can be explained by the high affinity of these elements for the humic substances. Further, Zn and Ni reveal a significant enrichment in sediment and it is due to release of industrial wastewater into the river. These trace metals are possible contaminants to enter into aquatic and food chain.     

Metal Pollution Assessment of Sediment and Water in the River Hindon, India

The metal pollution in water and sediment of the River Hindon in western Uttar Pradesh (India) was assessed for Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn. The metal concentrations in water showed wide temporal variation compared with bed sediment because of variability in water discharge and variations in suspended solid loadings. Metal concentrations in bed sediments provided a better evaluation of the degree and the extent of contamination in the aquatic environment, Santagarh and Atali being the most polluted sites of the river. The ratio of heavy metals to conservative elements (Fe, Al, etc.) may reveal the geochemical imbalances due to the elevated metal concentrations normally attributed to anthropogenic sources. Metal/Al ratios for the bed sediments of the river Hindon were used to determine the relative mobility and general trend of relative mobility occurred Fe > Mn > Zn > Cr > Ni > Pb > Cu > Cd.     

Load of Heavy Metals in the Airborne Dust Particulates of an Urban City of Central India

The geographical and temporal distribution patterns of airborne dust particulates have been studied in different representative areas of Raipur City. Dust fall samples from different sites were collected and some selected toxic metals namely Cr, Mn, Fe, Ni, Cu, Zn, Sb and Pb in them were determined by AAS. Total annual flux of 11.7, 541.4, 2751.0, 14.2, 9.8, 90.9, 17.6, and 17.7 kg km(-2) y(-1) were measured for Cr, Mn, Fe, Ni, Cu, Zn, Sb, and Pb respectively. The occurrence of metal concentration were generally in the order industrial > heavy traffic > commercial > residential area in Raipur city. The results of analysis show the existence of toxic metal concentration in the order Fe > Mn > Zn > Pb approximately Sb > Ni > Cr > Cu in Raipur city. These large levels of metal pollutants have also been correlated with some meteorological parameters like temperature, relative humidity and wind velocity, and strong positive correlations have been observed.     

Concentrations of sulphur and heavy metals in needles and rooting soils of Masson pine (Pinus massoniana L.) trees growing along an urban–rural gradient in Guangzhou, China

Current (C) and previous year (C + 1) needles and soils (organic horizon, 0-10 cm and 10-20 cm mineral depth) of Masson pine (Pinus massoniana L.) trees were sampled at four forested sites (Huang Pu industrial district, HP; South China Botanical Garden, BG; Mao Feng Mt., MF; and Nan Kun Mt., NK) in Guangzhou along a urban-rural gradient and analyzed for sulfur (S) and heavy metals (Cu, Zn, Ni, Cd, Cr and Pb) concentrations. Needle concentrations of all the elements were significantly higher at industrial HP than at other three sites, except for Cu and Pb which were highest at the traffic site (BG). The C + 1 needles generally had higher Cu, Cd, Pb, Zn, Cr than the C needles while the opposite was for Ni and S. Total and available Cd, Pb, Zn in soils peaked at the urban sites (HP and BG) and decreased at suburban MF and rural NK. Heavy metals were generally higher in the organic soils than in the mineral soils at all sites. Zinc and Pb at all sites, and Cd, S and Cu at the urban sites (HP and BG) in soils or pine needles were above or near their respective natural background levels, implying that threats resulted from these toxic elements occurred on local particularly urban forests, but did not for Cr and Ni due to their presence below their background values. Our results demonstrated that elements concentrations in needles and soils had reflected the variability of pollutants and the environmental quality change along the urban-rural transect, and were efficient as biomonitors to assess the influence of anthropogenic activities along the urbanization course on forest health.     

Heavy metals assessment and identification of their sources in agricultural soils of Southern Tehran, Iran

A detailed investigation was conducted to evaluate heavy metal sources and their spatial distribution in agricultural fields in the south of Tehran using statistics, geostatistics, and a geographic information system. The content of Cd, Cu, Co, Pb, Zn, Cr, and Ni were determined in 106 samples. The results showed that the primary inputs of Cr, Co, and Ni were due to pedogenic factors, while the inputs of Zn, Pb, and Cu were due to anthropogenic sources. Cd was associated with distinct sources, such as agricultural and industrial pollution. Ordinary kriging was carried out to map the spatial patters of heavy metals, and disjunctive kriging was used to quantify the probability of heavy metal concentrations higher than their recommended threshold values. The results show that Cd, Cu, Ni, and Zn exhibit pollution risk in the study area. The sources of the high pollution levels evaluated were related to the use of urban and industrial wastewater and agricultural practices. These results are useful for the development of proper management strategies for remediation practices in the polluted area.     

Metal Extraction from Road Sediment using Different Strength Reagents: Impact on Anthropogenic Contaminant Signals

Washoff of road deposited sediment into storm drainsystems is one of the major contributors to nonpoint sourcepollution in urban fluvial networks. These sediments contain avariety of potentially toxic organic and inorganic contaminants.Road sediment from 13 locations in an urban (non-industrialized)drainage basin, and soil from 10 background (control) locationswere collected to assess total and labile fractions of Al, Co,Cu, Fe, Mn, Ni, Pb and Zn. Four digestions, of varying strength,were used to assess contaminant levels, these included: a totalfour-acid digestion, a microwave-assisted digestion withconcentrated nitric acid (USEPA Method 3051), a 0.5 M `cold' HCl,and a 0.05 M EDTA (pH 7). Road sediment data indicate that Al,Co, Fe, Mn and Ni were primarily lithogenic in origin, while Cu,Pb and Zn showed very significant anthropogenic signals, mostprobably from vehicle-related sources. Median Pb concentrationenrichment ratios for the EDTA extraction were about 42,indicating an extreme anthropogenic signal. The weak extractants(HCl and EDTA) are considered in this study to be superior intheir ability to characterize the degree of anthropogeniccontamination and should be utilized more widely in environmentalcontaminant studies.     

Chemometric study on the trace metal accumulation in the sediments of the Cochin Estuary―Southwest coast of India

The distribution and accumulation of trace metals in the sediments of the Cochin estuary during the pre-monsoon, monsoon and post-monsoon periods were investigated. Sediment samples from 14 locations were collected and analysed for the metal contents (Mg, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb), organic carbon, total nitrogen, total sulphur and grain size. The data were processed using statistical tools like correlation, factor and cluster analysis. The study revealed an enrichment of Cd and Zn in the study area particularly at station 2, which is confirmed by enrichment factor, contamination factor and geoaccumulation index. The factor analysis revealed that the source of Cd and Zn may be same. The study indicated that the spatial variation for the metals like Mg, Cr, Fe, Co, Ni, Cu, Zn, Cd and Pb were predominant unlike Mn which shows a temporal variation. The strong association of trace metals with Fe and Mn hydroxides and oxides are prominent along the Cochin estuary. The anthropogenic inputs of industrial effluents mainly control the trace metals enrichment in the Cochin estuary.     

抚顺市PM10中元素分布特征及来源分析

为了确定抚顺市PM10中元素的浓度特征及其来源,于2006—2007年的采暖季、风沙季和非采暖季在抚顺市的6个采样点采集PM10样品,并用等离子体原子发射光谱法(ICP-AES)测定样品中Ti、Al、Mn、Mg、Ca、Na、K、Cu、Zn、As、Pb、Cr、Ni、Co、Cd、Fe、V等17种元素的含量。结果表明,Al、Mg、Ca、Na、K、Mn、Fe等地壳元素在17种元素中占有较大比重,全年平均达到97.0%。富集因子分析结果表明,Cu、Zn、Pb、Cr、Co、Cd等元素在各季和各采样点明显受到人为活动影响,是典型的污染元素。主因子分析结果显示,土壤风沙尘、建筑尘、燃煤尘、道路扬尘、机动车尾气排放、金属冶炼、锰、铜、钛工业源是抚顺市PM10中元素的主要来源。     

Spatial distribution and risk assessment of heavy metals in sediments from a hypertrophic plateau lake Dianchi, China

The sediment in Dianchi Lake, a hypereutrophic plateau lake in southwest China, was investigated and the concentration of heavy metals (Cu, Cr, Ni, Zn, Pb, Fe, Mn, and Cd) in the sediment and sediment properties were determined. Their spatial distribution and sources were analyzed using multivariate statistics. The result indicated that the studied metals exhibited three distinct spatial patterns; that is, Cu, Pb, Zn, and Ni had a similar distribution, with a concentration gradient from the north to the south part of the lake; Cd and Cr presented a similar distribution; Fe and Mn presented a quite different distribution than other metals, which indicated their different sources and geochemistry processes. Correlation and cluster analysis (CA) provided origin information on these metals and the CA result was observed corresponding to those three spatial patterns. Principal component analysis further displayed metal source and driving factors; that is, Cu, Pb, Zn, Ni, Cd, and Cr were mainly derived from anthropogenic sources, and Fe and Mn were mainly the result of natural processes. Sediment assessment was conducted using geoaccumulation index (Igeo), potential ecological risk indices, and USEPA guidelines. The result indicated that, generally, Cd was the most serious risk metal; Pb and Cu posed moderate potential ecological risk; Cr, Zn, and Ni had slight ecological risk; Fe and Mn had little risk. Comparison of the assessment tools showed that each of the methods had its limitation and could bias the result, and the combined use of the methodologies and local knowledge on lithology or metal background value of soil in the practice would give a more comprehensive understanding of the metal risk or pollution. Statistical analysis also indicated that nutrients had different impacts on Fe, Mn, and trace elements, which implied that in the assessment of metal risk, nutrients impact should be taken into consideration especially for eutrophic waters.     

Major inputs and mobility of potentially toxic elements contamination in urban areas

Soil quality in urban areas is affected by anthropogenic activities, posing a risk to human health and ecosystems. Since the pseudo-total concentrations of potentially toxic elements may not reflect their potential risks, the study of element mobility is very important on a risk assessment basis. This study aims at characterising the distribution and major sources of 34 elements in two Portuguese urban areas (Lisbon and Viseu), with different geological characteristics, industrial and urban development processes. Furthermore, the potential availability of As, Co, Cr, Cu, Ni, Pb and Zn was assessed, by measuring the fraction easily mobilised. Lisbon is enriched in elements of geogenic and anthropogenic origin, whereas in the smaller city, the high levels observed are mainly related to a geogenic origin. Background values can be more relevant than the dimension of the city, even when anthropogenic components may be present, and this parameter should be considered when comparing results from different cities. Regarding the potential available fraction, a high variability of results was observed for elements and for sampling sites with an influence of the soil’s general characteristics. Elements showing very high concentrations due to geological reasons presented, in general, a low mobility and it was not dependent on the degree of contamination. For elements with major anthropogenic origin, only Zn was dependent on the pseudo-total content. Yet, the highest available fractions of some elements, both with major geogenic and anthropogenic origin, were observed in specific contaminated samples. Therefore, a site-specific evaluation in urban soils is important due to the high spatial variability and heterogeneity.     

Fractionation of eleven elements by chemical bonding from airborne particulate matter collected in an industrial city in Argentina

A four-step chemical sequential extraction procedure was used to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in airborne particulate matter collected on glass fibre filters using a high-volume sampler. Two sets of samples were collected in 2001 (winter and summer campaigns) in representative zones of an industrial city of Argentina. The leaching scheme was applied to PM-10 particles and consisted in extracting the elements in four fractions, namely soluble and exchangeable elements; carbonates, oxides and reducible elements; bound to organic matter and sulfidic metals; and residual elements. Metals and metalloids at microg g(-1) level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). Analyte concentration varied from 14 microg g(-1) (equivalent to 1.0 ng m(-3)) for As to 11.8 mg g(-1) (equivalent to 2,089 ng m(-3)) for Al. Seven elements, namely Al, Cr, Fe, Mn, Pb, Ti and Zn showed similar distributions in both seasons while As was distributed in a significantly different manner in each season. The results exhibited low As contents in the first and second fractions that could be associated with routine coal combustion and a high content in the third and fourth fractions of the summer samples that could be linked to the use of pesticides. Aluminium, As, Cu, Mn, Ni, Ti, V and Zn were found in different percentages in the more bioavailable aqueous fraction with As, Mn, V and Zn exhibiting solubilities greater than 1% while Cr and Pb being insoluble. The content of Al, Cr, Cu, Fe, Ni, Pb, and Zn in the residual fraction was, in average, higher than 50%. A comparative assessment of the use of the underlying information available from fractionation studies compared to that obtained from total element content was done for Fe and Mn. It showed that the results obtained using chemical sequential extraction procedures allowed further discrimination of the potential air pollution sources.     

Characterization of metal aerosols in PM10 from urban, industrial, and Asian Dust sources

Metallic elements (As, Be, Ca, Cd, Co, Cr, Fe, K, Mn, Ni, Pb, Sb, Se, and Zn) in PM10 aerosols were determined at urban and industrial sites, which are affected by traffic and residential sources, metallurgical activity, and petrochemical and steel works. The effect of the long-range transported Asian Dust on the metal content of aerosols was also examined. At the urban sampling site, concentrations of As, Cd, Pb, Se, and Zn were assigned to road traffic and combustion sources, Ca and Fe to soil dust sources from long-range transported Asian Dusts, and Cr and Ni to metallurgical sources transported from the nearby industrial complex, based on Principal Component Analysis (PCA). Enhanced Cr and Ni concentrations at the metallurgical industrial site suggest that local emissions from metal-assembly facilities and manufacture of alloys contributed to elevated levels of those metals. We also observed that petrochemical activities contributed to increased levels of Sb and Zn. When Asian Dust events occurred, Ca, Fe, K, and Zn concentrations dramatically increased compared to values without the Asian Dust. Two different types of Asian Dust events were observed. For the Asian Dust event 1 (4/1/2007), the Fe and K concentrations were much higher by a factor of 2–3 than those for the Asian Dust event 2 (3/2/2008), while As, Mn, and Zn concentrations were significantly higher on the Asian Dust event 2. Backward trajectory analysis showed that for the Asian Dust event 2, the air mass had passed over the heavily industrialized zones in China during long-range transport to the current sampling site, suggesting that the As, Mn, and Zn may have originated from industrial sources.     

Baseline concentrations of trace elements in residential soils from Southeastern Missouri

Anthropogenic sources of pollution can significantly contribute to elevated concentrations of toxic elements in soils. A preliminary survey of trace elements content and their availability in residential soils from New Madrid County, Missouri was undertaken. Mean elemental concentrations (mg kg⁻¹, dry wt) of sixty two soil samples were: As 6.6, Be 0.8, Cd 1.6, Co 9.7, Cr 24.5, Cu 18.1, Fe 9951, Mn 298, Ni 15.6, Pb 48.8, V 42.1, Zn 95.5 and Hg 0.05. The US EPA preliminary remediation goals (PRGs) was only exceeded by As (7 % of samples) and V (8% of samples). The Missouri average background values were exceeded by Pb (69%), Zn (31%), Cu (27%), As (23%), Be (19%), Co (18%), Ni (16%), V (8%) and Mn (2%). Crustal enrichments (EF_c) for As (97), Cr (6), Cu (10), Pb (121), V (7), and Hg (17) were highest for North Lilbourn soils. Fractionation experiment revealed that Fe (54–79%) was in the residual phase while Zn (70–90%), Mn (88–92%), As (59–81%) and Pb (63–79%) were potentially available in soils. Factor loadings of the element concentrations on principal components 1, 2 and 3 accounted for over 81% variance of the data set. The factor loadings suggested that apart from natural contributions of trace elements to the soils, human activities possibly accounted for other inputs in soils.     

Spatial distribution and metal contamination in the coastal sediments of Al-Khafji area,Arabian Gulf,Saudi Arabia

To document the spatial distribution and metal contamination in the coastal sediments of the Al-Khafji area in the northern part of the Saudi Arabian Gulf, 27 samples were collected for Al, V, Cr, Mn, Cu, Zn, Cd, Pb, Hg, Sr, As, Fe, Co, and Ni analysis using inductively coupled plasma-mass spectrometer (ICP-MS). The results revealed the following descending order of the metal concentrations: Sr > Fe > Al > As > Mn > Ni > V > Zn > Cr > Cu > Pb > Co > Hg > Cd. Average levels of enrichment factor of Sr, As, Hg, Cd, Ni, V, Cu, Co, and Pb were higher than 2 (218.10, 128.50, 80.94, 41.50, 12.31, 5.66, 2.95, 2.90, and 2.85, respectively) and that means the anthropogenic sources of these metals, while Al, Zn, Cr and Mn have enrichment factor less than 2, which implies natural sources. Average values of Sr, Hg, Cd, Cr, Ni, and As in the coastal sediments of Al-Khafji area were mostly higher than the values recorded from the background shale and earth crust and from those results along coasts of the Caspian Sea and the Mediterranean Sea. The highest levels of Cu in the northern part of the studied coastline might be due to Al-Khafji desalination plant, while levels of Al, Ni, Cr, Fe, Mn, Pb, and Zn in the central part may be a result of landfilling and industrial sewage. The highest levels of As, Cd, Co, Cu, Hg, and V in the southern part seem to be due to oil pollutants from Khafji Joint Operations (KJO). The higher values of Sr in the studied sediments in general and particularly in locality 7 could relate to the hypersalinity and aragonitic composition of the scleractinian corals abundant in that area.     

Identification of heavy metal sources by multivariable analysis in a typical Mediterranean city (SE Spain)

Problems associated with heavy metal characterization in the majority of sites are often due to multiple sources of pollution. This work presents the results through the use of advanced statistical techniques to identify sources of soil heavy metals in a typical Mediterranean city. The multivariable analysis performed on seven metals identified four sources controlling their variability. Cr, Mn, and Ni contents were associated to soil parent materials; Cd and Pb contents were related to anthropogenic activities, specifically industrial activities and traffic; Cu content is controlled by long-term application of inorganic fertilizers in agricultural areas. Finally, zinc concentration is associated to commercial and outdoor activities in the area. These results were supported by the fact that metals associated to parent material (Cr, Mn, and Ni) were better correlated with soil lithogenic properties, while anthropogenic metals were correlated with more variable soil constituents.     

Heavy metal inputs evolution to an urban hypertrophic coastal lagoon, Rodrigo De Freitas Lagoon, Rio De Janeiro, Brazil

This work discusses the temporal variation of metal concentrations in a hypertrophic coastal lagoon located in the metropolitan area of Rio de Janeiro (Brazil). The lagoon watershed includes one of the mostly densely urbanized areas of the city but without industrial activities. Six sediment cores were collected in the lagoon between May and July 2003 and analyzed for the concentration of metals (Fe, Al, Mn, Zn, Pb, Cu, Cr, and Ni). Typical sedimentation rate was calculated as being 0.75 cm year^???1 and was uniform for at least the past 70 years. Therefore, the alterations in the dynamics of the lagoon caused by changes in its watershed were clearly indicated in sediment cores. The construction of an artificial canal to the sea and the increasing urbanization and soil use changes were the major factors affecting metal accumulation in the lagoon sediments. Metals typical of anthropogenic urban sources (Pb, Zn, and Cu) showed increasing loads following urbanization.