新型管式微孔曝气器性能研究

以废旧橡胶为主要原料研制的微孔曝气器，传质效率高，曝气充氧性能优良，搅拌能力强；沿管长方向具有很好的均匀布气性，输气曝气合二为一；制造工艺简单，价格低廉，安装方便；拓展了废旧橡胶的综合利用途径，以废治废，减少了废旧橡胶对环境的污染。     

改性建筑垃圾作为橡胶填料的可行性研究

将废旧混凝土和废粘土砖经湿式表面改性后作为橡胶填料,辅以配合剂与丁苯橡胶进行混炼、硫化制得橡胶组合物,并将其与以等量轻质碳酸钙作为填料,按相同配比混炼、硫化制得的橡胶组合物的性能进行比较.结果表明,将加工成微米级别(0.5～12.0 μm)的建筑垃圾(废旧混凝土或废粘土砖)经水解双(三乙氧基硅基丙基)四硫化物(KH-8...     

膜孔参数及表面活性剂对微孔曝气器充氧性能的影响研究

污水处理厂曝气设备的性能及水质条件是影响曝气充氧性能的重要因素,比较了清水及不同表面活性剂浓度下橡胶膜曝气器的曝气充氧性能,以标准氧传质效率(SOTE)为评价指标,得出了不同工况及膜孔参数下曝气充氧性能的变化规律。结果表明:在清水条件下,SOTE随着通气量、膜孔间距、膜孔孔径的增大而降低;表面活性剂条件下的SOTE(αSOTE)随着表面活性剂浓度的增大而降低;修正系数(α,αSOTE与SOTE的比值)随着膜孔孔径的增大而增大,膜孔孔径越小,表面活性剂对橡胶膜曝气器充氧性能的抑制作用越大。     

丝光废碱液净化处理工艺研究

为了循环利用牛仔布丝光加工工艺过程产生的废碱液,实验采用臭氧、双氧水以及二氧化锰为净化脱色剂对废碱液进行了脱色净化的研究,结果表明选用的3种脱色剂均有效果,以臭氧效果最佳。因此,重点探讨了臭氧的净化脱色工艺及条件,对于碱浓度为80 g/L的丝光废碱液,当臭氧曝气量为0.25 m3/h、接触反应时间为4 h时,脱色率可达到99.3%,经臭氧净化的废碱液能在牛仔布丝光工艺中循环使用。     

加强对拆解废旧电器的污染管理

随着国内经济的高速发展，市场上对金属材料的需求量猛增，价格剧升，其中有色金属和废钢资源显得特别缺乏。因此浙江省的台州、宁波及舟山等地的一些企业从国内外收进废旧电器，将它们分送到各拆解点进行拆解分离，从中获取再生原料。这样虽然缓解了金属资源与经济建设的矛盾，产生了一定的经济效益及社会效益，但旧电器拆解带来的环境污染问题却令人担忧。目前废旧电器的主要来源为美国、日本、韩国、欧共体及国内大中型企业和物资回收公司。废旧电器主要以旧电机、废电缆电线为主，还有部分废弃的电视机、电脑及家用电器生产线。其中废电…     

废旧家用电器回收利用及处理处置技术

随着大量家用电器进入报废期,废旧家用电器的资源化回收利用成为一个新的环境问题。介绍了国内外废旧家电的回收利用状况、处理方法和工艺流程,重点介绍了废印刷线路板的处理工艺和废塑料的再生利用,并针对我国的实际问题提出了相应的措施和办法。     

废聚苯乙烯泡沫塑料制取涂料及胶粘剂

阐述了利用废旧泡沫塑料研制和开发各种不同用途涂料的进展 ,研究了利用废聚苯乙烯泡沫塑料制取涂料的方法 ,讨论了该涂料的配方选择及性能指标     

沉淀法回收聚苯乙烯泡沫塑料的工艺研究

研究沉淀法回收聚苯乙烯泡沫塑料(EPS)的工艺,利用石油裂解副产物为溶剂回收废旧聚苯乙烯泡沫塑料,以废治废,回收利用。溶剂低毒,对聚苯乙烯泡沫塑料溶解速度快,溶解量大,价廉易得。采用转式间歇投料并附加溶剂挥发分回收装置的工艺,溶剂回收率高,无二次污染,可循环使用。聚苯乙烯塑料(PS)回收率可达99%。     

废聚苯乙烯泡沫塑料制取涂料及胶粘剂

阐述了利用废旧泡沫塑料研制和开发各种不同用途涂料的进展，研究了利用废聚苯乙烯泡沫塑料制取涂料的方法，讨论了该涂料的配方选择及性能指标。     

废铁屑处理难生物降解染料废水

研究了用废铁屑处理难生物降解的染料废水，考察了进pH值、曝气时间、固液比、铁屑粒度对废水处理效果的影响，并确定了适宜实验条件。实验证明，该法可以有效去除染料废水的色度和CODcr，在实验考察范围内，脱色率和CODcr去除率分别可达90％、61.7%。同时废水可生化性也得到了改善，BOD5／CODcr从19.6%上升到29.5%，提高了50％,有利于后续生化处理。该法以废治废，是一种很有实用价值的废水处理方法。     

A Comparison of Dioxin,Furan and Combustion Gas Data from Test Programs at Three MSW Incinerators

Dioxin, furan and combustion gas data from test programs conducted at the Pitts field, Prince Edward Island, and Peekskill municipal solid waste incinerators were compared to identify similar and discrepant results. Dioxin and furan concentrations sampled upstream of air pollution control devices are related to a variety of combustion gas variables monitored in the high temperature zones of the incinerators. The effects of temperature, excess oxygen, carbon monoxide, hydrochloric acid gas, flue gas moisture, particulate loading and refuse moisture and PVC content are discussed. Conclusions are made and future research needs are discussed.     

Codisposal of municipal refuse, sewage sludge and marine dredgings for methane production

As marine disposal of sewage sludge and dredged sediments may impose serious adverse effects to marine ecosystems, landfilling seems to be the most feasible method for the final disposal of these wastes. A batch experiment was conducted to study waste degradation and gas production after sewage sludge and marine dredgings were mixed with municipal refuse at 13 different ratios for 36 days. The addition of sludge and dredgings to municipal refuse enhanced gas production, compared with the degradation of refuse or sludge alone. A proper mixing ratio of wastes can also shorten the time to reach the final phase of anaerobiosis. The highest gas production was obtained from the ratio of 75-20-5 (refuse-sludge-dredgings) (wet weight basis). Its average daily gas production rate was 1.42 l kg(-1) waste mixture; methane content was 68.3%. The results indicated that codisposal of the three wastes would be beneficial for energy recovery from landfill gas.     

射流曝气的气液两相流的数值模拟

射流曝气在活性污泥处理方法中起着重要的作用.采用数值模拟的方法研究自吸式单级单喷射流器中的气液两相流动状况,通过对不同长径比和喷嘴面积比的射流曝气器模型的气液两相流的计算,定量分析长径比和喷嘴面积比对射流曝气器流场和空气与工作介质流量比的影响,为进一步设计开发新型高效的射流曝气器提供参考.     

射流曝气的气液两相流的数值模拟

射流曝气在活性污泥处理方法中起着重要的作用。采用数值模拟的方法研究自吸式单级单喷射流器中的气液两相流动状况，通过对不同长径比和喷嘴面积比的射流曝气器模型的气液两相流的计算，定量分析长径比和喷嘴面积比对射流曝气器流场和空气与工作介质流量比的影响，为进一步设计开发新型高效的射流曝气器提供参考。     

Fatal flaws in measuring landfill gas generation rates by empirical well testing

Well testing procedures, such as the Tier 3 methodology specified in the U.S. Code of Federal Regulations (CFR) Subtitle D, are commonly used for directly estimating landfill gas (LFG) emissions at municipal solid waste (MSW) landfills. Similar procedures are also used to estimate LFG generation rates for the design of LFG-to-energy projects. These methodologies assume that the LFG generation rate equals the extraction rate of a test gas well within its radius of influence (ROI). The ROI is defined as the distance from the extraction well at which the induced pressure drop is immeasurable by some standard of precision. Based on fluid dynamic principles, Tier 3 and similar methodologies are demonstrated to be incapable of providing reliable estimates of the LFG generation rate. These tests may either over- or underestimate the LFG generation rate depending on the precision with which the ROI is determined, but they will only coincidentally produce an estimate that accurately represents the actual LFG generation rate. Fluid dynamic principles dictate that the actual LFG generation rate can only be estimated if the pneumatic properties of the refuse and cover materials as well as the excess pressure in the refuse caused by LFG generation are known or can be estimated.     

四喷嘴射流曝气器性能的三维数值模拟与实验研究

应用FLUENT对四喷嘴射流曝气器在不同工况下的引射空气性能进行三维数值模拟,分析了射流器内的场分布特性与气液两相流动结构;同时建立射流器性能实验台,对四喷嘴射流曝气器的性能进行实验研究。研究表明,四喷嘴射流器性能较高,能量损失较少,两相流动结构稳定;相对于单喷嘴射流器,四喷嘴射流器的流量比和效率随压力比的变化显著;四喷嘴射流曝气器在工况4下工作性能最好,其流量比q为3.20,效率η为36%,而相似工况下单喷嘴结构流量比q仅为1左右,效率η不超过20%;数值模拟结果与实验结果吻合较好。     

老港生活垃圾填埋场垃圾组成和资源化价值研究

在上海老港生活垃圾填埋场,对1991～2004年间填埋垃圾进行了小规模开采和手工分选,考察了填埋垃圾组成随填埋年份的变化规律.分选结果表明:在缺氧和避光的封场环境中,填埋垃圾中塑料、橡胶和化纤织物组分在未发生明显老化,经简单预处理后即可再生利用;以塑料为主的有机组分随填埋年份呈对数上升趋势,2010年将占填埋垃圾的50%以上.因此,焚烧和气化热处理工艺将是填埋垃圾资源化的理想选择之一.     

Food waste collection and recycling for value-added products: potential applications and challenges in Hong Kong

About 3600 tonnes food waste are discarded in the landfills in Hong Kong daily. It is expected that the three strategic landfills in Hong Kong will be exhausted by 2020. In consideration of the food waste management environment and community needs in Hong Kong, as well as with reference to the food waste management systems in cities such as Linköping in Sweden and Oslo in Norway, a framework of food waste separation, collection, and recycling for food waste valorization is proposed in this paper. Food waste can be packed in an optic bag (i.e., a bag in green color), while the residual municipal solid waste (MSW) can be packed in a common plastic bag. All the wastes are then sent to the refuse transfer stations, in which food waste is separated from the residual MSW using an optic sensor. On the one hand, the sorted food waste can be converted into valuable materials (e.g., compost, swine feed, fish feed). On the other hand, the sorted food waste can be sent to the proposed Organic Waste Treatment Facilities and sewage treatment works for producing biogas. The biogas can be recovered to produce electricity and city gas (i.e., heating fuel for cooking purpose). Due to the challenges faced by the value-added products in Hong Kong, the biogas is recommended to be upgraded as a biogas fuel for vehicle use. Hopefully, the proposed framework will provide a simple and effective approach to food waste separation at source and promote sustainable use of waste to resource in Hong Kong.     

垃圾焚烧炉二次配风优化数值模拟

针对城市生活垃圾焚烧发电的排放问题，以重庆市某垃圾焚烧炉为原始模型，在炉膛两侧炉壁的适当位置设置二次配风口，并采用CFD（计算流体动力学）方法对炉膛内气体的二次燃烧过程进行数值模拟。通过观察对比有无二次配风以及二次配风口位置不同时炉膛内气体的温度场、气体在炉膛内的停留时间分布以及炉膛内气体的混合程度和湍动能等，重点分析了二次风在气体燃烧过程中所起的作用，并对2种不同二次配风口位置时抑制二恶英产生的效果进行了评价。通过对垃圾焚烧炉二次风的优化数值模拟，获得了适合本焚烧炉的比较合理的二次配风条件，可为焚烧炉的设计和改进提供一些有价值的参考。     

城市生活垃圾降解率分析研究

针对城市生活垃圾降解率研究不足的现状,结合室内物理模拟实验,对垃圾温度和垃圾降解率的变化规律进行分析研究。研究结果表明,填埋初期垃圾填埋体温度升高较快,服从三次曲线变化规律;温度对垃圾降解率有重要的影响,单一温度下垃圾降解率随时间变化近似符合微生物生长曲线;不同温度下,温度高,垃圾降解率快,试验证明41.00、45.00℃垃圾降解率最快,垃圾降解率相差不大,可以认为温度高于41.00℃时垃圾降解率可以按照41.00℃时垃圾降解率计算。