A model of ozone production in urban plumes

A model of rural smogs and urban plumes introduced into rural smog is developed. The single day variation of level of reactive species including ozone in rural smog in the eastern United States is simulated by mathematical modelling. Rural air masses are modelled as though they were outdoor smog chamber systems of low inital contaminant concentration to which small additional injections of contaminants, representing rural emissions, are made throughout the day. Rural smogs containing urban plumes are modelled as though they were outdoor inflatable smog chambers to which relatively large amounts of pollution material are added in the early minutes after sunrise and which are continuously diluted with material from chambers simulating rural smog. The urban plume model is specifically intended to simulate the photochemistry of parcels of air which sweep over relatively isolated cities in the eastern United States.The model runs suggest that the observed lack of urban plumes downwind of small cities is due to dilution. Additionally, the model suggests that the concentrations of both ozone and ozone precursors in rural smog have a significant effect on ozone production in urban plumes.     

经济集聚对雾霾污染影响的空间计量研究——以长江三角洲地区为例

雾霾污染是困扰中国经济发展的重大民生与环境问题。基于改进产出密度模型，运用地统计和空间计量模型分析长三角城市2015~2017年雾霾污染空间格局和影响因素。研究发现：（1）雾霾污染存在季节性变化特征并且各城市雾霾污染状况逐渐好转。（2）雾霾污染具有显著的局域集聚特征和空间异质性，杭州、宁波和台州呈现低－低集聚特征，而滁州、扬州、镇江和泰州为高－高集聚型，污染区域集中于省界处，污染程度自西北向东南逐渐降低。雾霾污染存在显著的城际空间正相关和空间溢出效应，周边城市雾霾污染对本地区会产生负影响。（3）长三角城市人口集聚、研发投入、产业结构、工业烟粉尘排放及城市建设均对雾霾污染产生正向影响，对外开放、能源消耗以及降水等因素对雾霾污染产生负向影响；雾霾污染与经济增长之间不存在库兹涅茨曲线关系。经济集聚通过优化生产要素的空间分布与组合、共享治污基础设施等，形成雾霾污染抑制作用。     

The chemistry of smog formation: A review of current knowledge

This paper describes smog chemistry and the methods used to develop our knowledge of its complex chemistry. These methods employ computer modeling, fundamental chemistry, smog chamber experiments, sophisticated analytical instrumentation, and process analysis techniques. The photochemistry leading to smog formation involves a kinetically controlled and coupled competitive process. The essential pathway for formation of nitrogen oxides starts with emissions composed primarily of NO, which are converted to NO₂, mostly via reactions with peroxy radicals; NO₂ is converted to photochemically inert nitric acid primarily by reaction with OH. Organics in smog chemistry are eventually oxidized to CO₂ and water; before this, they typically react with OH to form peroxy radicals. The peroxy (RO₂·) radicals couple the organic and nitrogen chemistry by converting NO to NO₂; the RO₂· radicals are converted to RO radicals, which typically lead to oxygenated intermediate organics that continue through OH·---RO₂·---RO· cycles. These OH·---RO₂·---RO· cycles produce CO, CO₂, and radical products. The radical products, which usually derive from photolysis of oxygenated intermediate organic products, are central to the overall process of smog formation. This is because the balance of these radicals affects the rapidity and severity of smog development. The radical balance is, in turn, controlled by the sources and sinks that depend on the HC/NO_x ratio, the types of organics, and the light flux. With only a rudimentary understanding of smog chemistry as a process, many of the effects observed from precursor controls can be explained and the basic shape of Empirical Kinetics Modeling Approach (EKMA) isopleth curves can be accounted for. The next step beyond this basic level of understanding involves a host of subprocesses composed of a complex series of chemical reactions. Current research in smog chemistry centers on the assessment and elucidation of these complex subprocesses. Atmospheric models currently in use rely on condensed chemical mechanisms. All such modern mechanisms treat the same basic processes, but differ both in their method of condensation and in their manner of addressing the complex subprocesses of smog chemistry.     

Current concepts and applications of air quality simulation models

Current air quality simulation models (AQSM) based on the continuity equation employ the gradient transport approximation and neglect the effect of turbulent fluctuation on chemical reactions. The implications of these approximations are examined, and an alternative statistical, Lagrangian approach applicable to nonreactive pollutants is also discussed.Practically, the working equations of AQSMs are derived from either the Gaussian principle or the conservation-of-mass principles, in conjunction with the semi-empirical parameterizatio of meteorological and photochemical aspects of the problem. The main features of the treatment of the meteorology and current concepts of the photochemical smog mechanism are examined. Some applications of AQMSs, e.g., predictions of future trends of urban carbon monoxide concentrations and photochemical smog, derivation of the relationship between ambient oxidant levels and precursor emission, and estimation of hydrocarbon reactivity for photochemical smog formation, are presented.     

治理长江上游水土流失的对策

作为一个发展中国家,中国除了由工业污染造成的臭氧层破坏、酸雨、光化学烟雾等环境问题之外。还有水土流失、沙漠化、森林植被减少等所谓的“欠发达的环境问题”。近年来,长江上游的水土流失问题十分严重,不仅成为长江下游洪涝灾害的址接原因,而且还然及整个长江流域的可持续发展。为了加快长江上游水土流失治理的进程,本文提出政府要从制度创新、加强组织体系建设、宣传可持续发展的新观念等多方面入手,进行全面综合治理。     

The Impact of Perceptual and Situational Factors on Environmental Communication: A Study of Citizen Engagement in China

This study applied a situational approach to understanding an environmental problem: PM2.5 (its resulted haze and smog air pollution) in China. Based on a national sample of 374 citizens living in China, it tested a situational model of problem solving and extended it by adding citizens’ environmental engagement behaviour as an immediate consequence of their communicative action. Results of a structural equation modelling analysis supported all the causal links in the conceptual model. Moreover, communicative action significantly mediated the relationship between referent criterion and environmental engagement. Problem recognition, constraint recognition, and involvement recognition did not influence environmental engagement directly, but exerted their significant indirect impact via two key mediators in the model: situational motivation in problem solving and communicative action in problem solving. Theoretical and practical implications of the present study were discussed.     

Air pollution in the semitropical Saudi urban area

This paper presents the outcome of research conducted in the city of Jeddah, Saudi Arabia. Analysis of recorded meteorological elements shows that the atmosphere of the area favors the accumulation of air pollutants. Dustfall rates were measured at 22 stations in different districts. High rates of dustfall were found in all districts, with maximum recorded values in central urban and industrial districts. Collected samples were analyzed to determine the causes of these excessive precipitations. Suspended particulate matter and other pollutants were found to exceed air quality standards set to meet environmental requirements. Carbon monoxide was found to exceed the air quality standard of 9 μL/L. Concentrations of photochemical oxidants indicated the possibility of Los Angeles-type photochemical smog formation. Geographic distribution of pollutant concentrations and chemical constituents of particulates were found to be influenced by both manmade and natural causes. Results are discussed and several conclusions are given.     

Traffic and outdoor air pollution levels near highways in Baghdad,Iraq

In Iraq, the number of passenger cars, trucks and buses, local generators, and heavy construction equipment rose to a considerable extent since 2003, causing high environmental problems. Many types of pollutants were monitored and recorded for 24 h during March 2016. The study attempts to explore and establish a relationship between the volume of activity and the movement of motor vehicles of various compounds and contaminants resulting from their exhaust pipes, such as sulfur dioxide, particulate matters, oxides of nitrogen, VOCs, and unburned hydrocarbons. The study focused in and around Mohammad Al-Qasim highway adjacent to the University of Technology, Baghdad. The results showed the need for urgent treatments addressed by the environmental authorities in the city. The study results demonstrated that these contaminants are increased during periods of the beginning and end of working hours for government departments. Some types of sulfur compounds (H₂S and SO₂) concentrations were at serious health-threatening levels, which is a result of the high sulfur content in the Iraqi fuel. The concentrations of NOx and VOC were high, also, which could make the studied area vulnerable to the risk of smog formation. The Iraqi government should make greater efforts to protect the environment and human in this country from the transportation pollution risks.     

Photochemical dispersion modeling: Review of model concepts and applications studies

Over the last decade, the development and application of sophisticated atmospheric models that simulate the transport and dispersion of ozone and its precursors have advanced rapidly. Further advancements are most likely to be found in more complete temporal and spatial characterization of photochemical smog formation processes via measurement. This paper provides an overview of the development of atmospheric photochemical dispersion models, first discussing in general terms the various physical processes occurring in the atmosphere that govern the formation, transport, and ultimate fate of ozone. Procedures for representing these physical processes in mathematical terms are presented next. Nearly all of the photochemical models in use today are derived from the semiempirical atmospheric diffusion equation, though theoretical formulations vary depending on which of the various terms in the pollutant mass balance equation are deemed significant for the application at hand. Examples of recent applications of the range of available photochemical model are presented, together with estimates of the accuracy of each generic modeling concept. Several topics warranting future research are identified, including the need to incorporate explicitly more of the stochastic (or probabilistic) nature of the atmosphere into the form of current photochemical model predictions (i.e., estimates of the variance and higher order moments of the predicted concentration distribution).     

Life cycle assessment part 2: current impact assessment practice

Providing our society with goods and services contributes to a wide range of environmental impacts. Waste generation, emissions and the consumption of resources occur at many stages in a product's life cycle-from raw material extraction, energy acquisition, production and manufacturing, use, reuse, recycling, through to ultimate disposal. These all contribute to impacts such as climate change, stratospheric ozone depletion, photooxidant formation (smog), eutrophication, acidification, toxicological stress on human health and ecosystems, the depletion of resources and noise-among others. The need exists to address these product-related contributions more holistically and in an integrated manner, providing complimentary insights to those of regulatory/process-oriented methodologies. A previous article (Part 1, Rebitzer et al., 2004) outlined how to define and model a product's life cycle in current practice, as well as the methods and tools that are available for compiling the associated waste, emissions and resource consumption data into a life cycle inventory. This article highlights how practitioners and researchers from many domains have come together to provide indicators for the different impacts attributable to products in the life cycle impact assessment (LCIA) phase of life cycle assessment (LCA).     

Photochemical smog effects in mixed conifer forests along a natural gradient of ozone and nitrogen deposition in the San Bernardino Mountains

Toxic effects of photochemical smog on ponderosa and Jeffrey pines in the San Bernardino Mountains were discovered in the 1950s. It was revealed that ozone is the main cause of foliar injury manifested as chlorotic mottle and premature needle senescence. Various morphological, physiological and biochemical alterations in the affected plants have been reported over a period of about 40 years of multidisciplinary research. Recently, the focus of research has shifted from studying the effects of ozone to multiple pollutant effects. Recent studies have indicated that the combination of ozone and nitrogen may alter biomass allocation in pines towards that of deciduous trees, accelerate litter accumulation, and increase carbon sequestration rates in heavily polluted forests. Further study of the effects of multiple pollutants, and their long-term consequences on the mixed conifer ecosystem, cannot be adequately done using the original San Bernardino Mountains Air Pollution Gradient network. To correct deficiencies in the design, the new site network is being configured for long-term studies on multiple air pollutant concentrations and deposition, physiological and biochemical changes in trees, growth and composition of over-story species, biogeochemical cycling including carbon cycling and sequestration, water quality, and biodiversity of forest ecosystems. Eleven sites have been re-established. A comparison of 1974 stand composition with data from 2000 stand composition indicate that significant changes in species composition have occurred at some sites with less change at other sites. Moist, high-pollution sites have experienced the greatest amount of forest change, while dryer low-pollution sites have experienced the least amount of stand change. In general, ponderosa pine had the lowest basal area increases and the highest mortality across the San Bernardino Mountains.     

Life cycle assessment part 1: framework, goal and scope definition, inventory analysis, and applications

Sustainable development requires methods and tools to measure and compare the environmental impacts of human activities for the provision of goods and services (both of which are summarized under the term "products"). Environmental impacts include those from emissions into the environment and through the consumption of resources, as well as other interventions (e.g., land use) associated with providing products that occur when extracting resources, producing materials, manufacturing the products, during consumption/use, and at the products' end-of-life (collection/sorting, reuse, recycling, waste disposal). These emissions and consumptions contribute to a wide range of impacts, such as climate change, stratospheric ozone depletion, tropospheric ozone (smog) creation, eutrophication, acidification, toxicological stress on human health and ecosystems, the depletion of resources, water use, land use, and noise-among others. A clear need, therefore, exists to be proactive and to provide complimentary insights, apart from current regulatory practices, to help reduce such impacts. Practitioners and researchers from many domains come together in life cycle assessment (LCA) to calculate indicators of the aforementioned potential environmental impacts that are linked to products-supporting the identification of opportunities for pollution prevention and reductions in resource consumption while taking the entire product life cycle into consideration. This paper, part 1 in a series of two, introduces the LCA framework and procedure, outlines how to define and model a product's life cycle, and provides an overview of available methods and tools for tabulating and compiling associated emissions and resource consumption data in a life cycle inventory (LCI). It also discusses the application of LCA in industry and policy making. The second paper, by Pennington et al. (Environ. Int. 2003, in press), highlights the key features, summarises available approaches, and outlines the key challenges of assessing the aforementioned inventory data in terms of contributions to environmental impacts (life cycle impact assessment, LCIA).     

Long-term trend and spatial pattern of PM2.5 induced premature mortality in China

With rapid economic growth, China has witnessed increasingly frequent and severe haze and smog episodes over the past decade, posing serious health impacts to the Chinese population, especially those in densely populated city clusters. Quantification of the spatial and temporal variation of health impacts attributable to ambient fine particulate matter (PM_2.5) has important implications for China's policies on air pollution control. In this study, we evaluated the spatial distribution of premature deaths in China between 2000 and 2010 attributable to ambient PM_2.5 in accord with the Global Burden of Disease based on a high resolution population density map of China, satellite retrieved PM_2.5 concentrations, and provincial health data. Our results suggest that China's anthropogenic ambient PM_2.5 led to 1,255,400 premature deaths in 2010, 42% higher than the level in 2000. Besides increased PM_2.5 concentration, rapid urbanization has attracted large population migration into the more developed eastern coastal urban areas, intensifying the overall health impact. In addition, our analysis implies that health burdens were exacerbated in some developing inner provinces with high population density (e.g. Henan, Anhui, Sichuan) because of the relocation of more polluting and resource-intensive industries into these regions. In order to avoid such national level environmental inequities, China's regulations on PM_2.5 should not be loosened in inner provinces. Furthermore policies should create incentive mechanisms that can promote transfer of advanced production and emissions control technologies from the coastal regions to the interior regions.     

Health effects of oxidants

Oxidants of significance to human health include ozone, nitrogen dioxide, and peroxyacetylnitrate. All of these compounds are involved in complex photochemical reactions which makes quantification and prediction of their individual health effects difficult. Ozone causes trauma to lung tissues and interferes with enzyme systems in the lungs and other tissues causing a broad range of symptoms. Measurable health impacts can occur at concentrations as low as 390 μg/m³. Acute effects of ozone exposure are reversible at normal urban concentrations (80–120 μg/m³). A special problem of concern, however, is increased susceptibility to infectious diseases contracted through the lungs. Nitrogen dioxide also causes trauma to lung tissues and interferes with enzyme systems. Measurable impacts can occur at concentrations as low as 100 μg/m³, but recovery is rapid and it is not known whether repeated exposures at this level have cumulative effects or predispose the lungs to permanent damage. Chronic exposure of laboratory animals to higher nitrogen dioxide levels can cause emphysema-like conditions and reduction in resistance to respiratory infection. Epidemiological studies of children in houses with gas stoves confirm the finding of reduced resistance to respiratory infection. The U.S. EPA estimates that health effects may occur in young children exposed to concentrations in excess of 280 to 560 μg/m³ one-hour average. These concentrations occur routinely in houses having gas stoves. Peroxyacetylnitrate is a powerful eye irritant in photochemical smog. Other health effects are similar to those of ozone, but less important because of the relatively low concentrations of this pollutant compared to other oxidants.     

High resolution exposure modelling of heat and air pollution and the impact on mortality

BackgroundElevated temperature and air pollution have been associated with increased mortality. Exposure to heat and air pollution, as well as the density of vulnerable groups varies within cities. The objective was to investigate the extent of neighbourhood differences in mortality risk due to heat and air pollution in a city with a temperate maritime climate.MethodsA case-crossover design was used to study associations between heat, air pollution and mortality. Different thermal indicators and air pollutants (PM₁₀, NO₂, O₃) were reconstructed at high spatial resolution to improve exposure classification. Daily exposures were linked to individual mortality cases over a 15 year period.ResultsSignificant interaction between maximum air temperature (Ta_max) and PM₁₀ was observed. During “summer smog” days (Ta_max > 25 °C and PM₁₀ > 50 μg/m³), the mortality risk at lag 2 was 7% higher compared to the reference (Ta_max 15 °C and PM₁₀ 15 μg/m³). Persons above age 85 living alone were at highest risk.ConclusionWe found significant synergistic effects of high temperatures and air pollution on mortality. Single living elderly were the most vulnerable group. Due to spatial differences in temperature and air pollution, mortality risks varied substantially between neighbourhoods, with a difference up to 7%.     

省域旅游扶贫工程研究

旅游扶贫工程是解决贫困问题、促进区域协调发展的重要途径。以广东为代表，在省城范围内开展的立体化协作旅游扶贫工程是一个实践创新，上个月政府主导、区域协调、系统动作、产业扶贫等特点和优势。本文在广东三年多来的实践基础上，首次提出“省域旅游扶贫工程”概念，并对这一新兴的旅游扶贫模式进行了系统研究，探讨了其运行机制，分析了其实施过程中可能面临的挑战和误区，最后提出了基于政策实践的相关建议。     

Fate of oil from two major oil spills: Role of microbial degradation in removing oil from the Amoco Cadiz and IXTOC I spills

The fate of oil was examined in intertidal sediments impacted by the Amoco Cadiz spill in Brittany, France, and in surface waters contaminated by the IXTOC I well blowout in the Bay of Campeche, Mexico. The role of microbial degradation in removing the contaminating hydrocarbons was assessed by laboratory determinations of numbers of hydrocarbon utilizing microorganisms, measurement of microbial hydrocarbon biodegradation potentials, by chemical analyses of samples incubated under controlled conditions and by examination of the evolution of the hydrocarbon mixture in field samples collected after the spill. Analyses included the use of ¹⁴C radiolabelled hydrocarbon tracers, glass capillary-gas chromatography and mass spectrometry. Numbers of hydrocarbon utilizing microorganisms were found to be elevated by several orders of magnitude in oil contaminated samples. Numbers of hydrocarbon utilizing microorganisms appear to provide a useful index of environmental hydrocarbon contamination. However, environmental constraints on microbial processes appear to be most important in determining actual rates of biodegradation rather than numbers of available hydrocarbon utilizing microorganisms. Very high rates of degradation were found in intertidal sediments impacted by the Amoco Cadiz spill. In contrast, rates of degradation in the Gulf of Mexico were found to be much lower, partly due to nutrient limitations and partly due to the formation of large masses of oil-water emulsion or mousse.     

Numerical simulation of 137Cs and (239,240)Pu concentrations by an ocean general circulation model

We simulated the spatial distributions and the temporal variations of 137Cs and (239,240)Pu concentrations in the ocean by using the ocean general circulation model which was developed by National Center of Atmospheric Research. These nuclides are introduced into seawaters from global fallout due to atmospheric nuclear weapons tests. The distribution of radioactive deposition on the world ocean is estimated from global precipitation data and observed values of annual deposition of radionuclides at the Meteorological Research Institute in Japan and several observed points in New Zealand. Radionuclides from global fallout have been transported by advection, diffusion and scavenging, and this concentration reduces by radioactive decay in the ocean. We verified the results of the model calculations by comparing simulated values of 137Cs and (239,240)Pu in seawater with the observed values included in the Historical Artificial Radionuclides in the HAM database, which has been constructed by the Meteorological Research Institute. The vertical distributions of the calculated 137Cs concentrations were in good agreement and are in good agreement with the observed profiles in the 1960s up to 250 m, in the 1970s up to 500 m, in the 1980s up to 750 m and in the 1990s up to 750 m. However, the calculated 137Cs concentrations were underestimated compared with the observed 137Cs at the deeper layer. This may suggest other transport processes of 137Cs to deep waters. The horizontal distributions of 137Cs concentrations in surface water could be simulated. A numerical tracer release experiment was performed to explain the horizontal distribution pattern. A maximum (239,240)Pu concentration layer occurs at an intermediate depth for both observed and calculated values, which is formed by particle scavenging. The horizontal distributions of the calculated (239,240)Pu concentrations in surface water could be simulated by considering the scavenging effect.     

Effect of user interpretation on uncertainty estimates: examples from the air-to-milk transfer of radiocesium

An important source of uncertainty in predictions of numerical simulation codes of environmental transport processes arises from the assumptions made by the user when interpreting the model and the scenario to be assessed. This type of uncertainty was examined systematically in this study and was compared with uncertainty due to varying parameter values in a code. Three terrestrial food chain codes that are driven by deposition of radionuclides from the atmosphere were used by up to ten participants to predict total deposition of ¹³⁷Cs and concentrations on pasture and in milk for two release scenarios. Collective uncertainty among the predictions of the ten users for concentrations in milk calculated for one scenario by one code was a factor of 2000, while the largest individual uncertainty was 20 times lower. Choice of parameter values contributed most to user-induced uncertainty, followed by scenario interpretation. Due to the significant disparity in predictions, it is recommended that assessments should not be carried out alone by a single code user.     

21世纪三峡库区极端气温指数的情景预估

利用气候模式诊断与比较计划(PCMDI）提供的9个新一代气候系统模式的模拟结果，通过多模式集合方法预估分析了3种排放情景(高排放A2、中等排放A1B和低排放B1）下21世纪三峡库区3种极端气温指数的可能变化。结果表明：21世纪三峡库区气温年较差呈震荡的趋势，主要将以增大为主。暖夜指数和热浪指数都将显著增加。整个21世纪，库区气温年较差将增加04~08℃，暖夜指数将增加133%~174%，热浪指数将增加85~133 d。分阶段来看，21世纪前期，气温年较差将增加02~06℃；暖夜指数将增加51%~73%，热浪指数将增加31~41 d；21世纪中期，气温年较差将增加04~10℃，暖夜指数将增加136%~189%，热浪指数将增加77~121 d；21世纪后期，气温年较差将增加06~14℃，暖夜指数将增加191%~289%，热浪指数将增加143~237 d