Limits of ecodesign: the case for open source product development

Abstract

In pursuit of coping mechanisms for the challenges of sustainable manufacturing, systematic methods have been developed to allow engineers to improve the ratio between products’ utility and environmental impact. These necessary efforts remain however limited if the surrounding production and consumption practices are not called into question at the same time. This article introduces open source product development as a potential approach for unlocking the limits of existing sustainable product design practices and to lead towards alternative and eco-efficient production and consumption practices termed as participative production. First, it discusses the potential advantages of this emerging practice in terms of environmental sustainability. Second, it provides a screened qualitative environmental analysis of 18 exemplary open source hardware products. Specific sustainable design principles implemented by these products are highlighted and discussed in order to identify challenges for further common research in the field of open source and sustainable product development.     

Uncertainty,Irreversibility and the Timing Problems of Environmental Policy

Abstract

Most environmental issues and policy designing are uncertain and irreversible; therefore, the timing of environmental policy implementation becomes especially important. This paper establishes a random dynamic programming model and analyzes the optimal timing problems in environmental policy under uncertain variables. This model results indicate that two variables have a significant impact on the timing of environmental policy implementation and they work in opposite directions: on one hand, the more uncertain the economy is, the higher the cost of policies implementation will be, and consequently the incentive to immediately adopt the policy will be stronger. On the other hand, the higher the uncertainty of the environment is, the stronger the irreversibility of ecological harm caused by pollutants per unit will be. Therefore, the government should implement new environmental policies as early as possible in order to gain more ecological benefits.     

Using Visual Impact Metaphors to Stimulate Environmentally Friendly Behavior: The Roles of Response Efficacy and Evaluative Persuasion Knowledge

ABSTRACT

Although people often are aware of the importance of adopting environmentally friendly lifestyles, they might be reluctant to do so as they believe that their actions do not make a difference (i.e. low response efficacy). Furthermore, they might experience reactance (e.g. negative attitudes) towards environmental messages that encourage them to adopt an environmentally friendly lifestyle. Therefore we experimentally tested whether it is possible to stimulate people to adopt an environmentally friendly lifestyle (i.e. recycle more clothing) by using visual impact metaphors that convey the message that old clothes deserve a new life. The findings show that a message in the form of a visual impact metaphor (vs. no visual impact metaphor) results in more positive attitudes towards recycling and stronger recycling intentions. This effect was mediated by two different underlying mechanisms: Response efficacy and more positive attitudes towards the persuasive attempt (i.e. positive evaluative persuasion knowledge).     

Scientific Basis and Technological Path of Regional Strategic Environmental Assessment

Abstract

The study tries to set up a system to extract strategic environmental assessment (SEA) in exploitation of regional development based on the present situation of environmental assessment in China. First, the article summarizes the emphasis and deficiency of international academic community’s SEA research in the past 10 years. Based on this, the article puts forward the concept and evaluation principles of regional strategic environmental assessment (RSEA). Then the article expounds the necessity of carrying out RSEA. After that, the article discusses in detail the process of RSEA, which includes defining evaluation scope, describing regional background, combing strategic behavior, designing development scenarios, predicting the pressure on environment, assessing environmental impact, screening alternatives and proposing regulation and control schemes.     

The Impact on Environmental Kuznets Curve by Trade and Foreign Direct Investment in China

Abstract

Based on data of trade, foreign direct investment (FDI), economic development and environmental conditions in China's 30 provinces between 1990–2002, this paper deals with the impact on Environmental Kuznets Curve (EKC) of trade and FDI in China. The results show no direct impact on EKC of trade, on the one hand. However, trade contributes significantly to economic growth, and has played a positive role in introducing advanced pollution prevention technology and environmental management methodology to China. Therefore, a proactive trade policy will help solve the environmental pollution problem brought by economic growth. On the other hand, there is a positive correlation between FDI and pollutant emission, which proves that FDI does have some negative influence on environment in China due to hasty introduction of foreign capital and inadequate environmental management system in China.     

Cleaner production solution selection for paper making – a case study of Latif paper products Co. Iran

Abstract

The objective of this research is to design an approach for selecting appropriate solutions to efficiently and productively reduce environmental pollution and water, energy and raw material consumption in a recycled paper manufacturing facility, the paper mill in Latif, Iran. To reach this goal, we develop a decision-making model using the Analytic Hierarchy Process (AHP). The proposed model provides a framework for cleaner production implementation specific to the paper industry. Pairwise comparisons of the results of designed questionnaires resulted in the hierarchy model being divided into five major groups: production modification; process change; preventive maintenance; renewal; and manpower resources.These five groups include 31 sub-criteria and seven alternatives. The results showed that process change yields the highest priority among the main criteria and that industrial automation and its technology level gives the highest priority among sub-criteria. Regarding the alternatives, reduction of environmental pollution is the most important solution for cleaner production in the industry. Also, product modification is the most sensitive criterion affecting the alternatives priority.     

Integration of DFE and DFMA for the sustainable development of an automotive component

The recent developments in manufacturing organizations recognize sustainability as an important value addition for survival in the competitive scenario. The design engineers are in search of approaches for creating environmental conscious products. The purpose of this paper is to report a research carried out for ensuring sustainable product design by the integration of Design for Environment (DFE) and Design for Manufacture and Assembly (DFMA) methodologies. In this context, this paper reports a case study carried out in an automotive component. The candidate product is the charge alternator pulley. The existing pulley has been created using Computer Aided Design. Then sustainability analysis was conducted on the existing component for determining environmental impact. This is followed by the engineering analysis of the component using ANSYS. Then conceptual design changes were developed in the proposed product using DFMA concept. Then the environmental impact has been evaluated in terms of carbon footprint, energy consumption and air/water impacts on proposed product. It has been found that the optimized pulley design possesses minimal environmental impact. The result of the case study indicated that the integration of DFE and DFMA concept could initiate new developments in sustainable designs with minimal impact to the environment and it also reduces the product cost.     

Analysis of Environmental and Socio-economic Determinants Affecting Population Longevity Level at County Level in China

Abstract

Based on the current literature, this paper is mainly intended to test whether environmental factors and socio-economic factors will have direct effect on the longevity at county level in China in order to determine the major determinants affecting local longevity level. Using the multi-regression model, we find the result that factors such as temperature, climate, longitude, type of soils, as well as type of agricultural food production play a major role in shaping the longevity at county level, and that socioeconomic factors like infant mortality and gross death rate also have some direct impact on longevity, but the degree of impact is not as strong as the above environmental factors.     

No Sustainability without Technical,Fiscal and Social Innovation

Abstract

Migration process has become increasingly important in recent research on population and the environment. A majority of the existing migration and environment literature has focused on the environmental causes and determinants of migration. With the largest rural-to-urban migration flow in world history, and growing concerns about the environmental problems accompanying its fast economic development, China provides a particularly important case for migration and environment research. This paper reviews major migration theories and recent research on environmental effects on migration, with specific attention to the influences of environmental factors on rural-to-urban labor migration in China. A comprehensive multilevel conceptual framework is developed for studying the environmental causes of rural-to-urban migration in China. The effects of land resources on household labor migration decisions in rural China are explored to illustrate the application of this framework.     

Fundamental issues and solutions in the design of China's ETS pilots: Allowance allocation,price mechanism and state-owned key enterprises

This paper analyzes the three main fundamental issues in the design of China’s ETS pilots,including allowance allocation,price mechanism and state-owned key enterprises,and proposed suggested solutions.For the issue of allowance allocation,we suggest that the gradual hybrid mode could be applied at the beginning,which starts with mainly free allocation and then increases auction ratio gradually.And grandfathering is a suitable method of free allocation.For the issue of price mechanism,we suggest a price floating zone with open market operation to reduce the uncertainty of prices.For the issue of state-owned key enterprises,we suggest a good coordination with SASAC,defining the state-owned property right and supervision right when state-owned key enterprises are involved into the carbon market,and the local government can set rules of allocation and transaction to limit their potential market power.     

Optimizing a warranty–based sustainable product service system using game theory

Abstract

In recent years, the concepts of sustainability and product service system have been closely associated with each other. In today’s competitive markets, due to Extended Producer Responsibility and customer environmental awareness, producers shift from ‘product-seller’ towards ‘product-service provider’ for using the environmental and economic advantages of coupling a product with services. This paper proposes a novel approach to determine the optimal warranty period and the out-of-warranty replacement period, from the point of view of the producer and the customer to minimise the total cost of usage and end of life of product. As regards the fact that adopted strategies by producers and customers sometimes are in conflict and it affects choosing the optimal product usage period, a game theory model was developed in this study. Finally, a case study with data from chain of local notebook service centres was applied to demonstrate some practical aspects of the developed model.     

Packaging redesign – benefits for the environment and the community

Abstract

This paper aims to underline the importance of the packaging redesign process and the potential benefits that can be derived from this for both the environment and the community. The research demonstrates that the redesign of paper corrugated packaging has cost savings for most links of the supply chain such as the industrial customers, retailers, wholesalers and final consumers. In addition, an applied case study will be used that aims to provide evidence that the redesign process could further offer weight and transportation benefits, provide better environmental performance and finally offer better protection for the packaged products. The alternative packaging suggestions made in the research refer to the secondary paper corrugated packaging since the objective is to show the value of the redesign process. The research provides the tools for a packaging designer, on how to estimate, analyse, redesign and compare different approaches, finding the way to a more sustainable packaging supply chain.     

Containing spectacle in the transnational public sphere

ABSTRACT

This paper analyzes the discursive struggle over the reach and containment of spectacle in environmental politics to provide (a) case study-based evidence of how, on one hand, transnationally shared environmental awareness and concern, emerging in part through spectacle, is translating into expectations of participation and demands for accountability, and (b) how this is already impacting the ways in which environmental politics is being understood and enacted locally, regionally and transnationally. Drawing on recent mediated debate over the Great Barrier Reef, it finds that while the transnational is clearly an ambition for environmental campaigners, and the perception that transnational publics are emerging is already impacting environmental politics, the potency of these publics and their capacity to meaningfully negotiate accountability is yet to be empirically confirmed. Nevertheless, measures to contain spectacle are providing a potency for a transnational public sphere, even if in reality it is still little more than a specter.     

Estimate on spillover effect of environmental pollution between peripheral areas

ABSTRACT

Interaction of environmental pollution between peripheral areas has become a central topic in the field of resources and environment but little is known about the actual impact on peripheral areas in the current literature. This paper sets out a simultaneous equation model to investigate the spillover effect of environmental pollution between China’s peripheral areas utilizing the panel data of 218 cities in China. Making use of indicators for measuring the impact on environmental pollution, it identifies that environmental pollution between cities of China has a significant two-way spillover effect. After standardization of variables, it is found that the spillover effect of peripheral areas on urban environmental pollution cannot be neglected. Nearly, a third of the environmental pollution level in a city is induced by the environmental pollution in peripheral areas. If the indicator of environmental pollution in peripheral areas is missing, wrong conclusions will be drawn. Therefore, government should shift the emphasis of environmental regulation from local to global, and improve the overall environmental quality through coordinated management of regional environment.     

Public Investment and Environmental Sustainability of Agricultural Production in China

Abstract

The excessive application of fertilizer and pesticides in grain production in China has posed a threat to the environmental sustainability of agricultural production. One of the major reasons of the increasing usage of chemical inputs by farmers is their trying to reach higher yields, especially In absence of adequate public inputs, such as development and extension of appropriate technology and necessary production infrastructure, etc. Based on the crop-specific data of the past 20 years, this paper examines how the public Investments in agricultural researches could impact on the reduction of farmers' private material inputs of major grain crops in China. It manifests that the increased investments in public sector, especially in agricultural researches, is a favorable and effective way to reduce farmers' private material inputs and should be given a priority consideration in the policy emendation to increase yields and improve production sustainability.     

Research on Public Participation and Information Publicity in Strategic Environmental Assessment

Abstract

It has been generally recognized that strategic environmental assessment integrates environment and development into decision-making and becomes an important decision-making tool for implementing sustainable development. This paper firstly introduces the relationships of SEA, public participation(PP)and information publicity(IP), then discusses the key parts in enforcing the effective process of PP: They are the methods for how to make sufficient information open (What), when to implement PP (When), who will determinate the public (Who), and how to make the models of PP (How). Six cases are compared and analyzed. At last, ways to improve the effectiveness of PP in China is also presented.     

Effect of lifestyle changes and consumption patterns on environmental impact: a comparison study of Pakistan and China

Increased economic development and industrialization put strain on environment, hence causing pollution and destroying ecosystem. Generally, many different factors affect the environment. These factors include GHG emissions, deforestation, and others. These are all related to human activities on Earth. Other factors that affect environment include population, consumption patterns, and changing life styles of people due to increased income. This study involves the comparison analysis of Pakistan and China on the basis of environmental impact caused by some major driving factors. China is the second largest CO₂ emitter in the world with a population of 1.37 billion in 2016 and the second largest economy in the world. Pakistan is ranked as 40th on the basis of nominal GDP. Both the countries observed noticeable growth in economic development for over 55 years, i.e. 1960–2016. This study identifies how population, affluence, consumption, and emissions as the major factors affect environmental pollution and use ImPACT equation, or I = PACT, to calculate the environmental impact and to determine which factors affect the environment the most. The study suggests that the people of both China and Pakistan have experienced increased income for the past 50 years and this increase has led to the changes in their lifestyles, from suitable clothing and quality food to comfortable living and increased energy consumption, thus affecting environment.     

The environmental potential of reuse: an application to used books

Reuse is generally considered to have environmental benefits, but it has not yet been widely adopted in environmental policy or strategy. In this paper, a simple model of second-hand markets is explored with a case study of used books that illustrates the behavior of the model and shows that such a model is consistent with the data. Three questions of the dynamics of reuse are addressed: (1) If it becomes easier to buy and sell used goods (via Internet markets or other means), by how much will sales of used goods increase? (2) When sales of used goods increase, by how much will sales of new goods decrease? (3) When is reuse better than recycling? Expanding from the case study, the model is used to examine how reuse affects the consumption of new goods, and the relative merits of reuse versus recycling. When the used goods market is small, the ratio of the price of used and new goods, an observable quantity, is approximately equal to the fractional decrease in sales of new goods that will result from increased sales of used goods. A formulation of the environmental impact of reuse and recycling is developed that includes the market impact of reuse. Illustrating this formulation for books with a simplified analysis, reuse of books through sales in a second-hand market is estimated to save more than twice as much energy, with considerable uncertainty, than making books from recycled paper. The formulation provides a basis for identifying products and markets for which reuse can be an effective environmental strategy.     

Towards a Paradigmatic Shift in Sustainability Studies: A Systematic Review of Peer Reviewed Literature and Future Agenda Setting to Consider Environmental (Un)sustainability of Digital Communication

The materiality of digital communication inflicts substantial environmental damage: the extraction of resources needed to produce digital devices; the toxicity of e-waste; and the rapidly increasing energy demands required to sustain data generated by digital communication. This damage, however, is paradoxically under-theorized in scholarship on environmental sustainability. Despite the existing critique of the “techno-fix” approach in sustainability studies, digitization – and digital communication in particular – continue to be celebrated as the tool for environmental sustainability; an approach we coin “digital solutionism.” The article presents the first systematic review of the literature to map the implicit assumptions about the relationships between digital communications and environmental sustainability, in order to examine how digital solutionism manifests, and why it persists. We propose a concept matrix that identifies the key blind spots with regards to environmental damages of the digital, and call for a paradigmatic shift in environmental sustainability studies. An agenda for future research is put forward that advocates for the following: (1) a systematic account of material damages of devices, platforms and data systems adopted into sustainability research and practice, resulting in changes in both research framing and methodological foundations; (2) a reconceptualization and denaturalization of the digital itself as a promising solution; (3) a theoretical dialogue between sustainability studies and environmental communication. (4) an expansion of environmental communication as a field, from focusing on the communication aspect of environmental change to include the environmental footprint of communication itself.     

Construction of an optimum system design method considering product lifecycle

This paper proposes an optimum system design method that especially considers product lifecycles and aims to help designers make effective decisions during the product design phase. By considering and estimating all lifecycle factors of cost and environmental impact in addition to the product performance, this method facilitates development of optimum design solutions that incorporate requirements pertaining to the product's entire lifecycle. Furthermore, quantitative estimation of lifecycle factors enables the numerical expression of optimum solutions, rather than depending primarily on experiment and designer intuition. To demonstrate the effectiveness of the proposed method, this paper develops an optimum system design method for a milling machine as an example of a machine product designed for long term use. The lifecycle cost and the lifecycle environmental impact are generally expressed as the summation of each value during manufacturing phase, usage phase, disposal phase and recycling phase. In this example model, Eco-indicator 99 is used to evaluate environmental impact. In the proposed lifecycle design optimisation method, the relationships among the product performance, the lifecycle cost and the lifecycle environmental impact are evaluated as a multi-objective optimisation problem. Analysis of the obtained Pareto optimum solution sets subsequently enables designers to pursue breakthrough product design solutions.