Effect of streambed bacteria release on E. coli concentrations: Monitoring and modeling with the modified SWAT

Streambed sediment has been attracting attention as a reservoir for bacteria, including pathogenic strains. Soil and Water Assessment Tool (SWAT) has been augmented with a bacteria transport subroutine in SWAT2005 in which bacteria die-off is the only in-stream process. The purpose of this study was to develop the partial model of sediment-associated bacteria transport in stream and to evaluate the potential significance of streambed Escherichia coli (E. coli) release and deposition within the SWAT microbial water quality simulations. Streambed E. coli release and deposition were simulated based on the sediment resuspension and deposition modules in SWAT. The modified SWAT was applied to the Little Cove Creek watershed, Pennsylvania, which has forestry and dairy pasture landuses. Temporal changes in sediment E. coli concentrations were derived from monitoring data rather than from a streambed bacteria population model. Sensitivity analyses and calibrations were separately conducted for both hydrologic and bacteria parameters. Hydrologic calibration characterized soils in the watershed as pervious and thus the surface runoff was only moderately contributing to the streamflow. However, the surface runoff carried large numbers of E. coli to the stream, and sediment resuspension contributed to the persistent concentration of E. coli in stream water. Although the uncertainty of E. coli concentrations in streambed sediments and from wildlife probably affected the performance of the modified SWAT model, this study qualitatively confirmed the significance of modeling E. coli release from streambed and deposition for the SWAT microbial water quality simulations. Further developments should include modeling dynamics of bacteria populations within streambeds.     

Ecological relevance of performance criteria for species distribution models

Species distribution models have often been developed based on ecological data. To develop reliable data-driven models, however, a sound model training and evaluation procedures are needed. A crucial step in these procedures is the assessment of the model performance, with as key component the applied performance criterion. Therefore, we reviewed seven performance criteria commonly applied in presence-absence modelling (the correctly classified instances, Kappa, sensitivity, specificity, the normalised mutual information statistic, the true skill statistic and the odds ratio) and analysed their application in both the model training and evaluation process. Although estimates of predictive performance have been used widely to assess final model quality, a systematic overview was missing because most analyses of performance criteria have been empirical and only focused on specific aspects of the performance criteria. This paper provides such an overview showing that different performance criteria evaluate a model differently and that this difference may be explained by the dependency of these criteria on the prevalence of the validation set. We showed theoretically that these prevalence effects only occur if the data are inseparable by an n-dimensional hyperplane, n being the number of input variables. Given this inseparability, different performance criteria focus on different aspects of model performance during model training, such as sensitivity, specificity or predictive accuracy. These findings have important consequences for ecological modelling because ecological data are mostly inseparable due to data noise and the complexity of the studied system. Consequently, it should be very clear which aspect of the model performance is evaluated, and models should be evaluated consistently, that is, independent of, or taking into account, species prevalence. The practical implications of these findings are clear. They provide further insight into the evaluation of ecological presence/absence models and attempt to assist modellers in their choice of suitable performance criteria.     

Incorporating behaviour into simple models of dispersal using the biological control agent Dicyphus hesperus

We explored the utility of incorporating easily measured, biologically realistic movement rules into simple models of dispersal. We depart from traditional random walk models by designing an individual-based simulation model where we decompose animal movement into three separate processes: emigration, between-patch movement, and immigration behaviour. These processes were quantified using experiments on the omnivorous insect Dicyphus hesperus moving through a tomato greenhouse. We compare the predictions of the individual-based model, along with a series of biased random walk models, against an independent experimental release of D. hesperus. We find that in this system, the short-term dispersal of these insects is described well by our individual-based model, but can also be described by a 2D grid-based biased random walk model when mortality is accounted for.     

Sanitary felling of Norway spruce due to spruce bark beetles in Slovenia: A model and projections for various climate change scenarios

A model is presented to predict sanitary felling of Norway spruce (Picea abies) due to spruce bark beetles (Ips typographus, Pityogenes chalcographus) in Slovenia according to different climate change scenarios. The model incorporates 21 variables that are directly or indirectly related to the dependent variable, and that can be arranged into five groups: climate, forest, landscape, topography, and soil. The soil properties are represented by 8 variables, 4 variables define the topography, 4 describe the climate, 4 define the landscape, and one additional variable provides the quantity of Norway spruce present in the model cell. The model was developed using the M5′ model tree. The basic spatial unit of the model is 1 km², and the time resolution is 1 year. The model evaluation was performed by three different measures: (1) the correlation coefficient (51.9%), (2) the Theil's inequality coefficient (0.49) and (3) the modelling efficiency (0.32). Validation of the model was carried out by 10-fold cross-validation. The model tree consists of 28 linear models, and model was calculated for three different climate change scenarios extending over a period until 2100, in 10-year intervals. The model is valid for the entire area of Slovenia; however, climate change projections were made only for the Maribor region (596 km²). The model assumes that relationships among the incorporated factors will remain unchanged under climate change, and the influence of humans was not taken into account. The structure of the model reveals the great importance of landscape variables, which proved to be positively correlated with the dependent variable. Variables that describe the water regime in the model cell were also highly correlated with the dependent variable, with evapotranspiration and parent material being of particular importance. The results of the model support the hypothesis that bark beetles do greater damage to Norway spruce artificially planted out of its native range in Slovenia, i.e., lowlands and soils rich in N, P, and K. The model calculation for climate change scenarios in the Maribor region shows an increase in sanitary felling of Norway spruce due to spruce bark beetles, for all scenarios. The model provides a path towards better understanding of the complex ecological interactions involved in bark beetle outbreaks. Potential application of the results in forest management and planning is discussed.     

Modeling amphibian energetics, habitat suitability, and movements of western toads, Anaxyrus (=Bufo) boreas, across present and future landscapes

Effective conservation of amphibian populations requires the prediction of how amphibians use and move through a landscape. Amphibians are closely coupled to their physical environment. Thus an approach that uses the physiological attributes of amphibians, together with knowledge of their natural history, should be helpful. We used Niche Mapper™ to model the known movements and habitat use patterns of a population of Western toads (Anaxyrus (=Bufo) boreas) occupying forested habitats in southeastern Idaho. Niche Mapper uses first principles of environmental biophysics to combine features of topography, climate, land cover, and animal features to model microclimates and animal physiology and behavior across landscapes. Niche Mapper reproduced core body temperatures (T_c) and evaporation rates of live toads with average errors of 1.6 ± 0.4 °C and 0.8 ± 0.2 g/h, respectively. For four different habitat types, it reproduced similar mid-summer daily temperature patterns as those measured in the field and calculated evaporation rates (g/h) with an average error rate of 7.2 ± 5.5%. Sensitivity analyses indicate these errors do not significantly affect estimates of food consumption or activity. Using Niche Mapper we predicted the daily habitats used by free-ranging toads; our accuracy for female toads was greater than for male toads (74.2 ± 6.8% and 53.6 ± 15.8%, respectively), reflecting the stronger patterns of habitat selection among females. Using these changing to construct a cost surface, we also reconstructed movement paths that were consistent with field observations. The effect of climate warming on toads depends on the interaction of temperature and atmospheric moisture. If climate change occurs as predicted, results from Niche Mapper suggests that climate warming will increase the physiological cost of landscapes thereby limiting the activity for toads in different habitats.     

Evaluating weather effects on interannual variation in net ecosystem productivity of a coastal temperate forest landscape: A model intercomparison

Forest productivity is strongly affected by seasonal weather patterns and by natural or anthropogenic disturbances. However weather effects on forest productivity are not currently represented in inventory-based models such as CBM-CFS3 used in national forest C accounting programs. To evaluate different approaches to modelling these effects, a model intercomparison was conducted among CBM-CFS3 and four process models (ecosys, CN-CLASS, Can-IBIS and 3PG) over a 2500 ha landscape in the Oyster River (OR) area of British Columbia, Canada. The process models used local weather data to simulate net primary productivity (NPP), net ecosystem productivity (NEP) and net biome productivity (NBP) from 1920 to 2005. Other inputs used by the process and inventory models were generated from soil, land cover and disturbance records. During a period of intense disturbance from 1928 to 1943, simulated NBP diverged considerably among the models. This divergence was attributed to differences among models in the sizes of detrital and humus C stocks in different soil layers to which a uniform set of soil C transformation coefficients was applied during disturbances. After the disturbance period, divergence in modelled NBP among models was much smaller, and attributed mainly to differences in simulated NPP caused by different approaches to modelling weather effects on productivity. In spite of these differences, age-detrended variation in annual NPP and NEP of closed canopy forest stands was negatively correlated with mean daily maximum air temperature during July-September (T_amax) in all process models (R² = 0.4-0.6), indicating that these correlations were robust. The negative correlation between T_amax and NEP was attributed to different processes in different models, which were tested by comparing CO₂ fluxes from these models with those measured by eddy covariance (EC) under contrasting air temperatures (T_a). The general agreement in sensitivity of annual NPP to T_amax among the process models led to the development of a generalized algorithm for weather effects on NPP of coastal temperate coniferous forests for use in inventory-based models such as CBM-CFS3: NPP′ = NPP − 57.1 (T_amax − 18.6), where NPP and NPP′ are the current and temperature-adjusted annual NPP estimates from the inventory-based model, 18.6 is the long-term mean daily maximum air temperature during July-September, and T_amax is the mean value for the current year. Our analysis indicated that the sensitivity of NPP to T_amax was nonlinear, so that this algorithm should not be extrapolated beyond the conditions of this study. However the process-based methodology to estimate weather effects on NPP and NEP developed in this study is widely applicable to other forest types and may be adopted for other inventory based forest carbon cycle models.     

Modelling habitat overlap among sympatric mesocarnivores in southern Illinois,USA

Few researchers have developed large-scale habitat models for sympatric carnivore species. We created habitat models for red foxes (Vulpes vulpes), coyotes (Canis latrans) and bobcats (Lynx rufus) in southern Illinois, USA, using the Penrose distance statistic, remotely sensed landscape data, and sighting location data within a GIS. Our objectives were to quantify and spatially model potential habitat differences among species. Habitat variables were quantified for 1-km² buffered areas around mesocarnivore sighting locations. Following variable reduction procedures, five habitat variables (percentage of grassland patches, interspersion–juxtaposition of forest patches, mean fractal dimension of wetland patches and the landscape, and road density) were used for analysis. Only one variable differed (P < 0.05) between red fox and coyote sighting areas (road density) and bobcat and coyote sighting areas (mean fractal dimension of the landscape). However, all five variables differed between red fox and bobcat sighting areas, indicating considerable differences in habitat affiliation between this pair-group. Compared to bobcats, red fox sightings were affiliated with more grassland cover and larger grassland patches, higher road densities, lower interspersion and juxtaposition of forest patches, and lower mean fractal dimension of wetland patches. These differences can be explained by different life history requirements relative to specific cover types. We then used the Penrose distance statistic to create habitat models for red foxes and bobcats, respectively, based on the five-variable dataset. An independent set of sighting locations were used to validate these models; model fit was good with 65% of mesocarnivore locations within the top 50% of Penrose distance values. In general, red foxes were affiliated with mixtures of agricultural and grassland cover, whereas bobcats were associated with a combination of grassland, wetland, and forest cover. The greatest habitat overlap between red foxes and bobcats was found at the interface between forested areas and more open cover types. Our study provides insight into habitat overlap among sympatric mesocarnivores, and the distance-based modelling approach we used has numerous applications for modelling wildlife–habitat relationships over large scales.     

Individual-based modeling of flooding and salinity effects on a coastal swamp forest

Coastal swamps are among the rapidly vanishing wetland habitats in Louisiana. Increased flooding, nutrient and sediment deprivation, and salt-water intrusion have been implicated as probable causes of the decline of coastal swamps. We developed a two-species individual-based forest succession model to compare the growth and composition of a cypress-tupelo swamp under various combinations of flooding intensity and salinity levels, using historical time-series of stage and salinity data as inputs. Our model simulates forest succession over 500 years by representing the growth, mortality, and reproduction of individual Taxodium distichum (baldcypress) and Nyssa aquatica (water tupelo) trees in a 1-km² spatial grid of 10 m × 10 m cells that vary in water levels and salinity through differences in elevation. We independently adjusted the elevations of each cell to obtain different grid-wide mean elevations and standard deviations of elevation; this affected the temporal and spatial pattern of flooding. We calibrated the model by adjusting selected parameters until averaged basal area, stem density and wood production rates under two different mean elevations (partially versus highly flooded) were qualitatively similar to comparable values reported for swamps in the literature. Corroboration involved comparing model predictions to four well-monitored contrasting habitat sites within the Maurepas Basin, Louisiana, USA. Model predictions of both species combined showed the same patterns among sites as the data, but the model overestimated wood production and the dominance of T. distichum. Exploratory simulations predicted that increased flooding leads to swamps with reduced basal areas and stem densities, while increased salinity resulted in lower basal areas at low salinity concentration (∼1-3 psu) and complete tree mortality at higher salinity concentrations (∼2-6 psu). Our model can provide insight into the succession dynamics of coastal swamps and information for the effective design of restoration actions.     

A parsimonious optimal foraging model explaining mortality patterns in Serengeti wildebeest

Based on data collected over 24 years in the Serengeti in Tanzania, Sinclair and Arcese (1995) indicated that the sensitivity of blue wildebeest Connochaetes taurinus to predation risk by lions Panthera leo may cause them to change habitats between open (low risk) and wooded (risky) habitats. They found that, in poor rainfall years, predators kill wildebeest that are in better condition than those that die of natural causes. In good rainfall years, predators kill wildebeest that are in worse condition than those that die of natural causes. Sinclair and Arcese (1995) proposed the “predation-sensitive food” hypothesis. This hypothesis suggests that, as food becomes limiting, animals take greater risks to obtain more food, and some of these animals are killed. I propose a more parsimonious hypothesis based on the marginal value theorem that is consistent with the observations made by Sinclair and Arcese (1995). Wildebeest follow a single decision rule in good and poor rainfall years, viz. move when foraging elsewhere increases your rate of intake of nutritious food. Similarly, predators follow a single decision rule in good and poor rainfall years, viz. take the prey item that maximizes the intake of energy per unit effort expended. This parsimonious model does not require differences in predator sensitivity as required by Sinclair and Arcese's (1995) model. I indicate ways in which my model can be falsified.     

Simulating the temporal pattern of waste production in farmed gilthead seabream (Sparus aurata), European seabass (Dicentrarchus labrax) and Atlantic bluefin tuna (Thunnus thynnus)

Most fish farming waste output models provide gross waste rates as a function of stocked or produced biomass for a year or total culture cycle, but without contemplating the temporality of the discharges. This work aims to ascertain the temporal pattern of waste loads by coupling available growth and waste production models and developing simulation under real production rearing conditions, considering the overlapping of batches and management of stocks for three widely cultured species in the Mediterranean Sea: gilthead seabream (Sparus aurata), European seabass (Dicentrarchus labrax) and Atlantic bluefin tuna (Thunnus thynnus). For a similar annual biomass production, the simulations showed that waste output and temporal dumping patterns differ between the three species as a result of the disparities in growth velocity, nutrient digestibility, maintenance metabolic budget and husbandry. The simulations allowed the temporal patterns including the periods of maximum discharge and the dissolved and particulate nitrogen and phosphorus content in the wastes released to be determined, both of which were seen to be species-specific.     

COLIWAVE a simulation model for survival of E. coli O157:H7 in dairy manure and manure-amended soil

A simulation model was developed to investigate the relative effects of temperature, oxygen concentration, substrate content and competition by autochthonous microbial community on the oscillatory behaviour and survival of Escherichia coli O157:H7 in manure and manure-amended soil. The overall decline in E. coli O157:H7 was primarily determined by competition with autochthonous copiotrophic bacteria simulated by an inter-specific competition term according to Lotka-Volterra. Oscillations of bacterial populations were attained by the relationships between relative growth and death rates with readily available substrate content. The model contains a logistic and exponential relation of relative growth and death rates, respectively, of E. coli O157:H7 and copiotrophic bacteria with temperature, resulting in optimum curves for net growth rates similar to the curves reported in the literature. The model has been both calibrated and validated on experimental data. The model was used to perform sensitivity analysis and to evaluate different manure and soil management scenarios in terms of survival of E. coli O157:H7. The relative effects of changes in temperature on simulated survival time of E. coli O157:H7 were more pronounced than changes in oxygen condition. Testing manure storage scenarios with realistic data revealed that manure stored in a heap that was turned every week resulted in almost 70% reduction of E. coli O157:H7 survival compared to unturned manure. At the surface of a heap with unturned manure, simulated survival time was the longest (2.4 times longer than inside the same heap). The simulation model provides a new approach to investigating dynamic changes of invasive microorganisms in natural substrates such as manure or manure-amended soil.     

Simulating regeneration and vegetation dynamics in Mediterranean coniferous forests

This study aims to provide a quantitative framework to model the dynamics of Mediterranean coniferous forests by integrating existing ecological data within a generic mathematical simulator. We developed an individual-based vegetation dynamics model, constrained on long-term field regeneration data, analyses of tree-rings and seed germination experiments. The simulator implements an asymmetric competition algorithm which is based on the location and size of each individual. Growth is parameterized through the analysis of tree-rings from more than thirty individuals of each of the three species of interest. A super-individual approach is implemented to simulate regeneration dynamics, constrained with available regeneration data across time-since-disturbance and light-availability gradients. The study concerns an insular population of an endemic to Greece Mediterranean fir (Abies cephalonica Loudon) on the island of Cephalonia (Ionian Sea) and two interacting populations of a Mediterranean pine (Pinus brutia Ten.) and a more temperate-oriented pine (Pinus nigra Arn. ssp. pallasiana) on the island of Lesbos (NE Aegean Sea), Greece. The model was validated against plot-level observations in terms of species standing biomass and regeneration vigour and adequately captured regeneration patterns and overall vegetation dynamics in both study sites. The potential effects of changing climatic patterns on the regeneration dynamics of the three species of interest were subsequently explored. With the assumption that a warmer future would probably cause changes in the duration of cold days, we tested how this change would affect the overall dynamics of the study sites, by focusing on the process of cold stratification upon seed germination. Following scenarios of a warmer future and under the current model parameterization, changes in the overall regeneration vigour controlled by a reduction in the amount of cold days, did not alter the overall dynamics in all plant populations studied. No changes were identified in the relative dominance of the interacting pine populations on Lesbos, while the observed reduction in the amount of emerging seedlings of A. cephalonica on Cephalonia did not affect biomass yield at later stages of stand development.     

Multi-metric evaluation of the models WARM,CropSyst, and WOFOST for rice

WARM (Water Accounting Rice Model) simulates paddy rice (Oryza sativa L.), based on temperature-driven development and radiation-driven crop growth. It also simulates: biomass partitioning, floodwater effect on temperature, spikelet sterility, floodwater and chemicals management, and soil hydrology. Biomass estimates from WARM were evaluated and compared with the ones from two generic crop models (CropSyst, WOFOST). The test-area was the Po Valley (Italy). Data collected at six sites from 1989 to 2004 from rice crops grown under flooded and non-limiting conditions were split into a calibration (to estimate some model parameters) and a validation set. For model evaluation, a fuzzy-logic based multiple-metrics indicator (MQI) was used: 0 (best) ≤ MQI ≤ 1 (worst). WARM estimates compared well with the actual data (mean MQI = 0.037 against 0.167 and 0.173 with CropSyst and WOFOST, respectively). On an average, the three models performed similarly for individual validation metrics such as modelling efficiency (EF > 0.90) and correlation coefficient (R > 0.98). WARM performed best in a weighed measure of the Akaike Information Criterion: (worst) 0<wk<1$0<w_k<1$ (best), considering estimation accuracy and number of parameters required to achieve it (mean wk=0.983$w_k=0.983$ against 0.007 and ∼0.000 with CropSyst and WOFOST, respectively). WARM results were sensitive to 30% of the model parameters (ratio being lower with both CropSyst, <10%, and WOFOST, <20%), but appeared the easiest model to use because of the lowest number of crop parameters required (10 against 15 and 34 with CropSyst and WOFOST, respectively). This study provides a concrete example of the possibilities offered using a range of assessment metrics to evaluate model estimates, predictive capabilities, and complexity.     

Design of a Domain Specific Language for modelling processes in landscapes

The modelling of processes that occur in landscapes is often confronted to issues related to the representation of space and the difficulty of properly handling time and multiple scales. In order to investigate these issues, a flexible modelling environment is required. We propose to develop such a tool based on a Domain Specific Language (DSL) that capitalises on the service-oriented architecture (SOA) paradigm. The modelling framework around the DSL is composed of a model building environment, a code generator and compiler, and a program execution platform. The DSL introduces five language elements (entity, service, relation, scenario and datafacer) that can be combined to offer a wide range of possibilities for modelling in space and time at different scales. When developing a model, model parts are either built using the DSL or taken from libraries of previously built ones, and adapted to the specific model. The practical usage of the DSL is illustrated first with the Lotka–Volterra model, and then with a landscape modelling experiment on the spread of a mosquito-borne disease in the Sahelian region of West Africa. An interesting characteristic of this approach is the possibility of adding new elements into an existing model, and replacing others with more appropriate ones, thus allowing potentially complex models to be built from simpler parts.     

A multi-agent simulation to assess the risk of malaria re-emergence in southern France

A multi-agent simulation (MAS) was developed to assess the risk of malaria re-emergence in the Camargue in southern France, a non-endemic area where mosquitoes of the genus Anopheles (Culicidae) live. The contact rate between people and potential malaria vectors, or the human biting rate, is one of the key factor to predict the risk of re-emergence of malaria, would the parasite be introduced in the region. Our model (called MALCAM) represents the different agents that could influence malaria transmission in the Camargue – people, mosquitoes, animal hosts and the landscape – in a spatially explicit environment. The model simulates spatial and temporal variations in human biting rate at the landscape scale. These variations depend on the distribution of people and potential vectors, their behaviour and their interactions. A land use/cover map was used as a cellular-spatial support for the movements of and interactions between mobile agents. The model was tested for its sensitivity to variations in parameter values, and for the agreement between field observations and model predictions. The MALCAM model provides a tool to better understand the interactions between the multiple agents of the disease transmission system, and the land use and land cover factors that control the spatial heterogeneity in these interactions. It allows testing hypotheses and scenarios related to disease dynamics by varying the value of exogenous biological, geographical, or human factors. This application of agent-based modelling to a human vector-borne disease can be adapted to different diseases and regions.     

Computer simulation applied to the biological control of the insect Aphis gossypii for the parasitoid Lysiphlebus testaceipes

In integrated pest management (IPM), biological control is one of the possible options for the prevention or remediation of an unacceptable pest activity or damage. The success of forecast models in IPM depends, among other factors, on the knowledge of temperature effect over pests and its natural enemies. In this work, we simulated the effects of parasitism of Lysiphlebus testaceipes (Cresson, 1880) (Hymenoptera: Aphidiidae) on Aphis gossypii (Glover, 1877) (Hemiptera: Aphididae), a pest that is associated to crops of great economic importance in several parts of the world. We made use of experimental data relative to the host and its parasitoid at different temperatures. Age structure was incorporated into the dynamics through the Penna model. The results obtained showed that simulation, as a forecast model, can be a useful tool for biological control programs.     

Simulation modeling to understand how selective foraging by beaver can drive the structure and function of a willow community

Beaver–willow (Castor-Salix) communities are a unique and vital component of healthy wetlands throughout the Holarctic region. Beaver selectively forage willow to provide fresh food, stored winter food, and construction material. The effects of this complex foraging behavior on the structure and function of willow communities is poorly understood. Simulation modeling may help ecologists understand these complex interactions. In this study, a modified version of the SAVANNA ecosystem model was developed to better understand how beaver foraging affects the structure and function of a willow community in a simulated riparian ecosystem in Rocky Mountain National Park, Colorado (RMNP). The model represents willow in terms of plant and stem dynamics and beaver foraging in terms of the quantity and quality of stems cut to meet the energetic and life history requirements of beaver. Given a site where all stems were equally available, the model suggested a simulated beaver family of 2 adults, 2 yearlings, and 2 kits required a minimum of 4 ha of willow (containing about10 stems m⁻²) to persist in a steady-state condition. Beaver created a willow community where the annual net primary productivity (ANPP) was 2 times higher and plant architecture was more diverse than the willow community without beaver. Beaver foraging created a plant architecture dominated by medium size willow plants, which likely explains how beaver can increase ANPP. Long-term simulations suggested that woody biomass stabilized at similar values even though availability differed greatly at initial condition. Simulations also suggested that willow ANPP increased across a range of beaver densities until beaver became food limited. Thus, selective foraging by beaver increased productivity, decreased biomass, and increased structural heterogeneity in a simulated willow community.     

Integrating soil carbon cycling with that of nitrogen and phosphorus in the watershed model SWAT: Theory and model testing

In this paper we describe and test a sub-model that integrates the cycling of carbon (C), nitrogen (N) and phosphorus (P) in the Soil Water Assessment Tool (SWAT) watershed model. The core of the sub-model is a multi-layer, one-pool soil organic carbon (S_C) algorithm, in which the decomposition rate of S_C and input rate to S_C (through decomposition and humification of residues) depend on the current size of S_C. The organic N and P fluxes are coupled to that of C and depend on the available mineral N and P, and the C:N and N:P ratios of the decomposing pools. Tillage explicitly affects the soil organic matter turnover rate through tool-specific coefficients. Unlike most models, the turnover of soil organic matter does not follow first order kinetics. Each soil layer has a specific maximum capacity to accumulate C or C saturation (S_x) that depends on texture and controls the turnover rate. It is shown in an analytical solution that S_x is a parameter with major influence in the model C dynamics. Testing with a 65-yr data set from the dryland wheat growing region in Oregon shows that the model adequately simulates the S_C dynamics in the topsoil (top 0.3 m) for three different treatments. Three key model parameters, the optimal decomposition and humification rates and a factor controlling the effect of soil moisture and temperature on the decomposition rate, showed low uncertainty as determined by generalized likelihood uncertainty estimation. Nonetheless, the parameter set that provided accurate simulations in the topsoil tended to overestimate S_C in the subsoil, suggesting that a mechanism that expresses at depth might not be represented in the current sub-model structure. The explicit integration of C, N, and P fluxes allows for a more cohesive simulation of nutrient cycling in the SWAT model. The sub-model has to be tested in forestland and rangeland in addition to agricultural land, and in diverse soils with extreme properties such high or low pH, an organic horizon, or volcanic soils.     

Modelling coupled peach tree-aphid population dynamics and their control by winter pruning and nitrogen fertilization

Nitrogen fertilization and winter pruning are commonly used to control crop production in peach [Prunus persica (L.) Batsch] orchards. They are also known to affect the dynamics of Myzus persicae (Sulzer) (Homoptera: Aphididae) aphid populations via bottom-up regulation processes. Interactions between crops and pests can cause complex system behaviour in response to management practices. An integrated approach will therefore improve the understanding of the effects of these two cultural practices on aphid and peach performances.We developed a simulation model that describes the cultural control of interacting peach tree and aphid population dynamics. It uses the principles of common trophic models while gathering available knowledge and explicit assumptions on peach and aphid functioning and the effects of cultural practices.The model was able to qualitatively reproduce the system behaviour observed in the field. It accounted for actions and feedback such as stimulation of foliar growth by winter pruning, consecutive aphid population increase, subsequent damage to foliage, and partial compensatory growth of foliage. The model also reproduced low losses in fruit production due to aphid infestations. However, it called for further integration of ‘long-term’ effects. Analysis of the model showed the complexity of peach tree and aphid responses to leaf N × winter pruning interactions. Simulations indicated that fruit production losses remained low within a range of realistic values of leaf N and pruning intensity, whereas manipulating peach and aphid dynamics, their interactions and their relationships to practices could result in higher losses.The model is useful to evaluate the relevance of cultural practices for a bottom-up regulation of aphid dynamics in crop-pest management. After considering other control methods and fruit quality, it can be used to find a combination of practices that optimises trade-offs between fruit production and environmental conservation goals. A modelling approach that links crop growth and pest population dynamics and integrates management practice effects has strong potential for improving crop-pest management in an integrated crop production context.     

Determining factors that influence the dispersal of a pelagic species: A comparison between artificial neural networks and evolutionary algorithms

Because of increasing transport and trade there is a growing threat of marine invasive species being introduced into regions where they do not presently occur. So that the impacts of such species can be mitigated, it is important to predict how individuals, particularly passive dispersers are transported and dispersed in the ocean as well as in coastal regions so that new incursions of potential invasive species are rapidly detected and origins identified. Such predictions also support strategic monitoring, containment and/or eradication programs. To determine factors influencing a passive disperser, around coastal New Zealand, data from the genus Physalia (Cnidaria: Siphonophora) were used. Oceanographic data on wave height and wind direction and records of occurrences of Physalia on swimming beaches throughout the summer season were used to create models using artificial neural networks (ANNs) and Na?ve Bayesian Classifier (NBC). First, however, redundant and irrelevant data were removed using feature selection of a subset of variables. Two methods for feature selection were compared, one based on the multilayer perceptron and another based on an evolutionary algorithm. The models indicated that New Zealand appears to have two independent systems driven by currents and oceanographic variables that are responsible for the redistribution of Physalia from north of New Zealand and from the Tasman Sea to their subsequent presence in coastal waters. One system is centred in the east coast of northern New Zealand and the other involves a dynamic system that encompasses four other regions on both coasts of the country. Interestingly, the models confirm, molecular data obtained from Physalia in a previous study that identified a similar distribution of systems around New Zealand coastal waters. Additionally, this study demonstrates that the modelling methods used could generate valid hypotheses from noisy and complicated data in a system about which there is little previous knowledge.