English county councils and their agenda for waste minimisation

Minimisation is the top priority of the waste management hierarchy, which is one of the guiding principals for national solid waste management planning throughout the developed world. As such it should be encouraged as a means for reducing wastes which require treatment and disposal, whether they be household, commercial or industrial in source. This paper suggests that minimisation is not being given the necessary policy frameworks or legislation within which to develop in the UK, and questions whether minimisation is being afforded the respect and attention, from all levels, that is due the most preferable waste option according to the hierarchy. This theme is investigated by surveying the county councils of England as a representative sample of waste disposal authorities in England, and former waste regulation authorities. They are responsible for guiding local and district waste policy and are the regional waste planners in the UK. If they are not seriously taking on board the message of minimisation, then there is little chance that it will succeed without further legislative developments. Some 59% of English counties have a minimisation policy, whilst only 47% have participated in and supported a minimisation programme or trial within their region. The majority of these developments have occurred within the last three years, and 78% of counties who have participated in a programme have found it a successful venture. By 1999 79% of English counties will have been actively involved in a minimisation programme in their region, which is a positive scenario. This trend must continue if waste minimisation is to become the key theme of future sustainable waste management in the UK as was intended by declarations at the Rio '92 conference and in subsequent UK Government policy and strategy.     

Phosphorus recovery and recycling from waste: An appraisal based on a French case study

Phosphate rocks, used for phosphorus (P) fertilizer production, are a non-renewable resource at the human time scale. Their depletion at the global scale may threaten global food and feed security. To prevent this depletion, improved P resource recycling from food chain waste to agricultural soils and to the food and feed industry is often presented as a serious option. However, waste streams are often complex and their recycling efficiency is poorly characterized. The aim of this paper is to estimate the P recovery and recycling potential from waste, considering France as a case study. We assessed the P flows in food processing waste, household wastewater and municipal waste at the country scale using a substance flow analysis for the year 2006. We also quantified the P recycling efficiency as the fraction of P in waste that ultimately reached agricultural soils or was recycled in the food and feed industry. Efforts were made to limit data uncertainty by cross-checking multiple data sources concerning P content in waste materials. Results showed that, in general, P recovery in waste was high but that the overall P recycling efficiency was only 51% at the country scale. In particular, P recycling efficiency was 75% for industrial waste, 43% for household wastewater and 47% for municipal waste. The remaining P was discharged into water bodies or landfilled, causing P-induced environmental problems as well as losses of nutrient resources. Major P losses were through food waste (which amounted to 39% of P in available food) and treated wastewater, and the findings were confirmed through cross-checking with alternative data sources. Options for improving P resource recycling and, thereby, reducing P fertilizer use were quantified but appeared to be less promising than scenarios based on reduced food waste or redesigned agricultural systems.     

Cost-efficiency in packaging waste management: The case of Belgium

In order to exploit economies of scale Belgian municipalities regularly cooperate in the provision of waste related services. In particular for the collection and separation of household packaging waste, municipalities appear to seek technical and cost efficiency gains by cooperating via municipal waste joint ventures. Although most Belgian municipal waste joint ventures can present excellent recycling and recovery rates for household packaging waste, their performance in terms of cost-efficiency has never been assessed. Using a unique dataset comprising of the costs for all 35 Belgian municipal waste joint ventures in 2010, this paper present the first assessment of the cost efficiency of household packaging waste collection in Belgium. As we are not sure on the relative importance of the separate cost efficiency scores for the three selectively collected household packaging waste fractions when determining the overall cost efficiency, this paper draws on the Benefit-of-the-Doubt approach. Our results indicate that, despite the substantial cooperation between municipalities, still considerable differences in cost efficiency for household packaging waste collection exist.     

Energy recovery or material recovery for MSW treatments?

Whether to recycle the recyclable fraction in the MSW (municipal solid waste) or to incinerate it for energy recovery is a debating issue. In this paper we present a simple criterion to judge what type of waste components should be recycled or incinerated with energy recovery. According to the R1 formula presented by the waste framework directive (Directive 2008/98/EC of the European Parliament), this paper calculates the energy performances of MSW waste-to-energy plants currently operated in Taiwan firstly. By using the assumed value of energy recovery efficiency and carbon emission costs, we compare the treatment methods between recycling (material recovery) and energy recovery by the cost and benefit analysis, and examine the suitability of recycling for waste fractions of paper, food waste, PET, PVC, and plastic bags/films under a variety of scenarios. The results show that food waste is more appropriate to be treated by recycling while plastic bags/films are suggested to be incinerated with energy recovery.     

辽宁省危险废物排放现状与污染控制战略

结合辽宁省危险废物排放现状，提出辽宁省危险废物污染控制战略。建立全省危险废物管理与登记交换中心，建设省级危险废物安全填埋处置中心、危险废物焚烧中心、省级危险废物污染事故预警系统。提出全省医疗废物处置设施建设布局和技术路线选择方案、硼泥和铬渣处置技术路线。在大城市或经济较发达城市，可采取回转炉方法集中焚烧医疗废物，而运输半径之外偏远山区或经济欠发达城市可采用高温灭菌方法处置本辖区内的医疗废物。硼泥、铬渣则优先采用资源化技术进行处置。     

County‐Scale Rainwater Harvesting Feasibility in the United States: Climate,Collection Area,Density, and Reuse Considerations

Roof rainwater harvesting (RWH) has the potential to augment water supplies for urban and suburban uses throughout the United States (U.S.). Studies of the performance of RWH at the building and city scales in the U.S. are available, but a countrywide overview of the potential performance of RWH at the county scale has not been done before. Three approaches were taken: (1) assess the viability of RWH in terms of the rainfall that could be captured in relation to the water demand in each county (excluding agriculture), (2) evaluate the performance of a “typical” domestic RWH system across all counties with metrics related to its ability to supply the potable and nonpotable demand, and (3) evaluate the effect of adding a 50% rainwater reuse component to the analysis. We find RWH could be a viable supplemental water source in the U.S., particularly in counties of the Pacific Northwest, Central, and Eastern regions (percent demand covered >50%). Low population density counties have the potential to meet their annual water needs with RWH, while high‐density counties could only source a small portion (~20%) of their annual demand with RWH. Typical RWH systems in counties in the Central and Eastern U.S. performed better than in Western counties. Adding a reuse component can be a key factor in making RWH attractive in many areas of the country. This work can inform future water infrastructure investment and planning in the U.S.     

Waste minimisation in practice

One of the major hindrances to waste minimisation on a construction site is the difficulty in establishing a methodology and using this methodology to benchmark future construction projects. This paper introduces SMARTWaste, a software tool that has been used to audit, reduce and target waste arisings on a construction site. This tool tries to link the construction process and the waste hierarchy. That is reducing waste on a construction site rather than landfilling it. Three applications of the SMARTWaste software will be discussed using case studies from three different types of construction. An evaluation of these case studies shows that, by implementing a waste minimisation scheme on-site, you can improve material recovery for reuse. Also, by using the waste arisings as a benchmark you can reduce your waste arisings on future sites. Application of SMARTWaste or a similar waste minimisation tool on a wider basis could reduce waste arisings and could result in a built environment that consumed less natural resources and energy, and also produced less pollution and waste. Such a built environment would be environmentally and socially more responsive and responsible.     

Modelling and analysis of international recycling between developed and developing countries

To deal with the complexity of recycling, a wide variety of models have been developed, each serving a specific purpose. Despite the current trend increasing international trade in recycling-related material flows, the international dimension of physical and economic relationships in recycling is often ignored in current models and analyses. This paper develops a formal model of an international material-product chain (MPC) that represents the mechanism behind international recycling. The attention is focused on the case of a developed and a developing country that exchange material commodities, final products and recyclable waste. Among others, the model demonstrates that taking into account environmental externalities results in higher levels of recycling. Moreover, we show that international recycling is mainly driven by regional differences in the quantity and quality of factor endowments and economic efficiency of recycling. Given that industrialised countries are relatively well endowed with recyclable waste, the recovery rate usually exceeds the utilisation rate. In developing countries, an opposite pattern is observed.     

填料式浮选柱操作参数的研究

在实验室装置上研究了不锈钢波纹板填料柱的主要操作参数对除油率的影响。研究结果表明：填料可以明显改善气体在柱内的径向分布，可以明显提高浮选柱的操作稳定性。实验确定了波纹板填料式浮选柱的主要操作参数是：最低气体表现线速度3．8cm／s，污水停留时间为5min，浮选剂投加量为5～10mg／L。     

废印刷线路板处置和非金属回收利用研究进展

废印刷线路板的资源化处置一直是电子废弃物处理的热点和难点,目前有多种方法已经投入应用或者在研究阶段,这些方法在分离效率、回收率、操作简单性、本身环境友好性、有无二次污染等方面有不同的优缺点。目前主流的广泛采用的方法是分步处理,破碎后利用物理方法进行分选,得到的金属和非金属组分再分别进行进一步的回收利用。本文对近年来废印刷线路板的总体处置技术和物理分选后非金属的回收利用的研究进行了总结,并对将来的研究方向进行了展望,为废印刷线路板资源化再利用产业化发展提供参考。     

A model of costs and resources for rural and peri-urban water supply and sanitation in the 1990s

This article develops a model of cost and financing strategies for rural and peri-urban water supply and sanitation. It suggests that significant progress towards the World Summit for Children's goal of universal access to water supply and sanitation can be made if a combination of strategies is adopted. On the cost side, significant cost reductions should be possible through efficiency in resource use and reduction of system management costs. On the financing side, it suggests restructuring the financing of the sector with improved efficiency and greater cost recovery in urban services; full recovery of operation and maintenance costs; cost sharing through community contributions in kind such as local labour and financially in rural and peri-urban water supply for basic levels of service depending on willingness and ability to pay and full cost recovery for higher levels of service; a high degree of cost recovery in rural and peri-urban sanitation; development of institutional structures for both collection and management of revenues; development of alternate financing mechanisms such as rural credit schemes and revolving funds, adapted in specific country contexts, including the required institutional mechanisms; and additional allocations from governments and external support agencies. Additional government or external financing alone, while critical, will not of itself lead to effectiveness in the use of resources. Equally, cost recovery alone cannot lead to universal access and sustainable solutions. A composite set of actions is needed within which building capacities of institutions and people is necessary for sustainability .     

Is Municipal Solid Waste Recycling Economically Efficient?

It has traditionally been argued that recycling municipal solid waste (MSW) is usually not economically viable and that only when externalities, long-term dynamic considerations, and/or the entire product life cycle are taken into account, recycling becomes worthwhile from a social point of view. This article explores the results of a wide study conducted in Israel in the years 2000–2004. Our results reveal that recycling is optimal more often than usually claimed, even when externality considerations are ignored. The study is unique in the tools it uses to explore the efficiency of recycling: a computer-based simulation applied to an extensive database. We developed a simulation for assessing the costs of handling and treating MSW under different waste-management systems and used this simulation to explore possible cost reductions obtained by designating some of the waste (otherwise sent to landfill) to recycling. We ran the simulation on data from 79 municipalities in Israel that produce over 60% of MSW in Israel. For each municipality, we were able to arrive at an optimal method of waste management and compare the costs associated with 100% landfilling to the costs born by the municipality when some of the waste is recycled. Our results indicate that for 51% of the municipalities, it would be efficient to adopt recycling, even without accounting for externality costs. We found that by adopting recycling, municipalities would be able to reduce direct costs by an average of 11%. Through interviews conducted with representatives of municipalities, we were also able to identify obstacles to the utilization of recycling, answering in part the question of why actual recycling levels in Israel are lower than our model predicts they should be.     

A life cycle based multi-objective optimization model for the management of computer waste

The accelerating pace of waste generation from used electrical and electronic equipment is of growing global concern. Within this waste stream, computer hardware is quite significant in terms of both volume and risk to the environment because of the hazardous materials within it. The waste management hierarchy of prevention, reuse, recycle, treatment and disposal in landfill is accepted as a universal guideline for waste management. The contemporary concept of integrated solid waste management is very complex comprising of not only the environmental aspects or the technical aspects of the waste management hierarchy, but also incorporating economic, institutional, perceived risk and social issues in the context of complete life cycle of waste. Moreover, when to shift from one stage of hierarchy to another, is an involved decision warranting inclusion of several case specific issues. This paper presents a life cycle based multi-objective model that can help decision makers in integrated waste management. The proposed model has been applied to a case study of computer waste scenario in Delhi, India, which apart from having computer waste from its native population receives large quantities of imported second hand computers. The model has been used to evaluate management cost and reuse time span or life cycle of various streams of computer waste for different objectives of economy, perceived risk and environmental impact. The model results for different scenarios of waste generation have been analyzed to understand the tradeoffs between cost, perceived risk and environmental impact. The optimum life cycle of a computer desktop was observed to be shorter by 25% while optimizing cost than while optimizing impact to the environment or risk perceived by public. Proposed integrated approach can be useful for determining the optimum life cycle of computer waste, as well as optimum configuration of waste management facilities, for urban centers where computer waste related issues are of growing concern.     

Predicted impact and evaluation of North Carolina's phosphorus indexing tool

Increased concern about potential losses of phosphorus (P) from agricultural fields receiving animal waste has resulted in the implementation of new state and federal regulations related to nutrient management. In response to strengthened nutrient management standards that require consideration of P, North Carolina has developed a site-specific P indexing system called the Phosphorus Loss Assessment Tool (PLAT) to predict relative amounts of potential P loss from agricultural fields. The purpose of this study was to apply the PLAT index on farms throughout North Carolina in an attempt to predict the percentage and types of farms that will be forced to change management practices due to implementation of new regulations. Sites from all 100 counties were sampled, with the number of samples taken from each county depending on the proportion of the state's agricultural land that occurs in that county. Results showed that approximately 8% of producers in the state will be required to apply animal waste or inorganic fertilizer on a P rather than nitrogen basis, with the percentage increasing for farmers who apply animal waste (approximately 27%). The PLAT index predicted the greatest amounts of P loss from sites in the Coastal Plain region of North Carolina and from sites receiving poultry waste. Loss of dissolved P through surface runoff tended to be greater than other loss pathways and presents an area of concern as no best management practices (BMPs) currently exist for the reduction of in-field dissolved P. The PLAT index predicted the areas in the state that are known to be disproportionately vulnerable to P loss due to histories of high P applications, high densities of animal units, or soil type and landscapes that are most susceptible to P loss.     

Auditing non-hazardous wastes from golf course operations: moving from a waste to a sustainability framework

This paper provides non-hazardous solid waste audit procedures and bench mark audit data for golf courses (GCs). The paper also demonstrates the narrow scope of solid waste audit data, and the need to move towards a broader auditing scope such as that contained in sustainability auditing frameworks. A case study of Clear Lake Golf Course, located in southwestern Manitoba, Canada was completed. Annual waste generation rates at the GC were estimated to be 46.2 tonnes/year with 83% of this material compostable. Grass clipping material generated from the putting greens accounted for 79% of the waste stream. The GC achieved a solid waste diversion rate of 81% (waste generated not destined for landfill per total waste material generated). A future, realistic target of 97% diversion was also identified. The 7 day audit period was found to be unsuitable for estimating grass clipping generation rates. Implementation of a broader sustainability framework for future audits will harmonize many existing management functions such as solid waste auditing, waste characterizations, pollution prevention, green procurement, customer satisfaction, and the efficiency of the operations.     

A life cycle based multi-objective optimization model for the management of computer waste

The accelerating pace of waste generation from used electrical and electronic equipment is of growing global concern. Within this waste stream, computer hardware is quite significant in terms of both volume and risk to the environment because of the hazardous materials within it. The waste management hierarchy of prevention, reuse, recycle, treatment and disposal in landfill is accepted as a universal guideline for waste management. The contemporary concept of integrated solid waste management is very complex comprising of not only the environmental aspects or the technical aspects of the waste management hierarchy, but also incorporating economic, institutional, perceived risk and social issues in the context of complete life cycle of waste. Moreover, when to shift from one stage of hierarchy to another, is an involved decision warranting inclusion of several case specific issues. This paper presents a life cycle based multi-objective model that can help decision makers in integrated waste management. The proposed model has been applied to a case study of computer waste scenario in Delhi, India, which apart from having computer waste from its native population receives large quantities of imported second hand computers. The model has been used to evaluate management cost and reuse time span or life cycle of various streams of computer waste for different objectives of economy, perceived risk and environmental impact. The model results for different scenarios of waste generation have been analyzed to understand the tradeoffs between cost, perceived risk and environmental impact. The optimum life cycle of a computer desktop was observed to be shorter by 25% while optimizing cost than while optimizing impact to the environment or risk perceived by public. Proposed integrated approach can be useful for determining the optimum life cycle of computer waste, as well as optimum configuration of waste management facilities, for urban centers where computer waste related issues are of growing concern.     

中国固体废物进出口格局演化分析——以废纸为例

固体废物进出口是影响我国生态文明建设及区域可持续发展的重要因素,也是最近环境管理关注的焦点。为了认识我国固体废物的进出口形势和全球固体废物贸易的格局,本文以进口量最大的固体废物——废纸为例,系统总结梳理了近年来我国废纸进出口情况的演化,绘制了2016年国际废纸贸易的流向地图,从2015年以来的废物管理政策调整出发探讨未来废纸产业的发展和转变。研究发现:(1)作为主要的造纸原材料,我国废纸进口量从1996年的137万t增加到2016年的2850万t,增长了近20倍。(2)当前全球废纸贸易突出表现为发达国家出口、发展中国家进口的格局,我国作为最大的废纸进口国,进口约占全球总量55%的废纸,美国则为最大的废纸出口国,出口约占全球总量36%的废纸。(3)应对洋垃圾入境的挑战,未来我国应在进口管控、再生资源产业发展等多个方面继续加强政策的引导和调控作用,激励国内的再生资源市场,促使废纸利用企业调整产业布局,加快产业转型。     

Solid Waste Treatment as a High-Priority and Low- Cost Alternative for Greenhouse Gas Mitigation

The increased concern about environmental problems caused by inadequate waste management, as well as the concern about global warming, promotes actions toward a sustainable management of the organic fraction of the waste. Landfills, the most common means to dispose of municipal solid waste (MSW), lead to the conversion of the organic waste to biogas, containing about 50% methane, a very active greenhouse gas (GHG). One unit of methane has a global warming potential of 21 computed for a 100-year horizon or 56 computed for 20 years. The waste sector in Israel contributes 13% of total greenhouse gases (GHG) emissions for a time horizon of 100 years (for a time horizon of 20 years, the waste sector contribution equals to more than 25% of total GHG emissions). The ultimate goal is to minimize the amount of methane (CH₄) by converting it to CO₂. This can be achieved by physicochemical means (e.g., landfill gas flare, incineration) or by biological processes (e.g., composting, anaerobic digestion). Since the waste in Israel has a high organic material content, it was found that the most cost-effective means to treat the degradable organic components is by aerobic composting (investment of less than US$ 10 to reduce emission of one ton CO₂ equivalent per year). Another benefit of this technology is the ability to implement it within a short period. The suggested approach, which should be implemented especially in developing countries, could reduce a significant amount of GHG at relatively low cost and short time. The development of a national policy for proper waste treatment can be a significant means to abate GHG emissions in the short term, enabling a gain in time to develop other means for the long run. In addition, the use of CO₂ quotas will credit the waste sector and will promote profitable proper waste management.     

废铝的回收处理与现代技术

本文分析了我国废铝回收处理现状,论述了废铝回收与现代技术的关系,指出废铝的回收分类标准和废铝的直接改制利用应引起人们的重视。     

Refrigeration waste heat utilization for drying applications: a review

ABSTRACT

Cold chain industry has a vast potential for waste heat recovery. It is a matter of importance for energy efficiency point of view, as global energy demand is increasing day by day. Ample amount of low-grade energy is either unutilized or underutilized. The heat rejected by a Heat pump or refrigeration system emerged as a promising solution for dehydration by utilizing low-grade waste heat despite higher investment. As compared to solar drying technology, heat pump drying evolved as a reliable method regarding better process control, energy efficiency, and quality of the product to be dried. Energy utilized through the refrigeration system’s waste/exhaust heat recovery in combination with or without renewable energy source enhances the overall efficiency of the system and also reduces the cost. This useful review investigated and compared the research findings of waste heat utilization through heat pump and from condenser of refrigeration system on laboratory, pilot as well as industrial scale for drying of various fruits, vegetables, and agro products. Various drying parameters like drying rate, moisture content, Specific Moisture Extraction Rate (SMER), Coefficient of Performance (COP), Exergy efficiency, and temperature as well as humidity conditions inside the drying chamber were also reviewed to promote the technological advancement of energy utilization by commercial cold storage waste heat recovery.