Urban Water Resources Quota Management: The Core Strategy for Water Demand Management in China

Since China has the largest population in the world, the available water resources per capita in China are very limited. With the rapid economic development that is currently occurring, the shortage of water resources at the national level has become extremely critical. How to solve the problems due to water scarcity and water pollution has received increasing attention from the Chinese government and various communities. In order to provide a sustainable development environment for 1.6 billion people in the future, the whole country has started to reform urban water resources management systems in terms of related policies, regulations, methodologies, and technologies focusing on improving the efficiency and effectiveness in water use. Urban water quota management has now become a core strategy in developing a water resources governance model for water demand management aiming at establishing a water-saving society. This paper introduces the main stages and the processes of implementing water quota management in China, analyzes the basic principles, and expounds the elements, information foundation, core module and operational model of the urban water quota management system. It has been demonstrated that urban water quota management has made some remarkable contribution not only in transforming the pattern of water mode and strengthening water management enforcement but also in integrating various management methods in saving water and preventing pollution.     

Comparison of physical technologies for biomass control in biofilters treating gaseous toluene

Excessive accumulation of biomass within gas-phase biofilters often results in the deterioration of removal performance. Compared with chemical and biological technologies, physical technologies are more effective in removing biomass and inducing less inhibition of the biofilter performance. This study applied different physical technologies, namely, air sparging, mechanical mixing, and washing with water at various temperatures, to remove excess biomass in biofilters treating toluene. Filter pressure drop, removed dry biomass, biofilter performance, and microbial metabolic characteristics were analyzed to evaluate the effectiveness of the methods. Results showed that air sparging was inefficient for biomass removal (1 kg dry biomass/m³ filter), whereas mechanical mixing significantly inhibited removal efficiencies (<30%). Washing of the packing with fluids was feasible, and hot fluids can remove a large amount of biomass. However, hot fluids reduce microbial activity and inhibit removal performance. Washing of the packing with either 20°C or 50°C water showed efficiency as >3 kg dry biomass/m³ filter can be removed at both temperatures with removal efficiencies at approximately 40% after treatment. Finally, different technologies were compared and summarized to propose an optimized strategy of biomass control for industrial biofilters.

Implications: This study is to apply different physical technologies, namely, air sparging, mechanical mixing, and washing with water of different temperatures, to remove the excess biomass in biofilters treating toluene. The filter pressure drop, removed dry biomass, biofilter performance, and microbial metabolic characteristics were all analyzed to evaluate the effectiveness of the methods. The results of this study provide useful information regarding biomass control of industrial biofilters.     

From first generation biofuels to advanced solar biofuels

Roadmaps towards sustainable bioeconomy, including the production of biofuels, in many EU countries mostly rely on biomass use. However, although biomass is renewable, the efficiency of biomass production is too low to be able to fully replace the fossil fuels. The use of land for fuel production also introduces ethical problems in increasing the food price. Harvesting solar energy by the photosynthetic machinery of plants and autotrophic microorganisms is the basis for all biomass production. This paper describes current challenges and possibilities to sustainably increase the biomass production and highlights future technologies to further enhance biofuel production directly from sunlight. The biggest scientific breakthroughs are expected to rely on a new technology called “synthetic biology”, which makes engineering of biological systems possible. It will enable direct conversion of solar energy to a fuel from inexhaustible raw materials: sun light, water and CO₂. In the future, such solar biofuels are expected to be produced in engineered photosynthetic microorganisms or in completely synthetic living factories.     

Technological options for the management of biosolids

BACKGROUND, AIM, AND SCOPE: Large quantities of biosolids (sewage sludge), which are produced from municipal wastewater treatment, are ever-increasing because of the commissioning of new treatment plants and continuous upgrades of the existing facilities. A large proportion of biosolids are currently landfilled. With increasing pressure from regulators and the general public, landfilling of biosolids is being phased out in many countries because of potential secondary pollution caused by leachate and the emission of methane, a potent greenhouse gas. Biosolids contain nutrients and energy that can be used beneficially. Significant efforts have been made recently to develop new technologies to manage biosolids and make useful products from them. In this paper, we provide a review of the technologies in biosolids management. MATERIALS AND METHODS: A survey of literature was conducted. RESULTS: At present, the most common beneficial use of biosolids is agricultural land application because of inherent fertilizer values found in biosolids. Expansion of land application, however, may be limited in the future because of more stringent regulatory requirements and public concern about food chain contamination in some countries. Perceived as a green energy source, the combustion of biosolids has received renewed interest. Anaerobic digestion is generally a more effective method than incineration for energy recovery, and digested biosolids are suitable for further beneficial use through land application. Although conventional incineration systems for biosolid management generally consume more energy than they produce because of the high moisture content in the biosolids, it is expected that more combustion systems, either monocombustion or cocombustion, will be built to cope with the increasing quantity of biosolids. DISCUSSION: Under the increasingly popular low-carbon economy policy, biosolids may be recognized as a renewable fuel and be eligible for 'carbon credits'. Because ash can be used to manufacture construction materials, combustion can provide a complete management for biosolids. A number of advanced thermal conversion technologies (e.g., supercritical water oxidation process and pyrolysis) are under development for biosolids management with a goal to generate useful products, such as higher quality fuels and recovery of phosphorus. With an ever-increasing demand for renewable energy, growing bioenergy crops and forests using biosolids as a fertilizer and soil amendment can not only contribute to the low-carbon economy but also maximize the nutrient and carbon value of the biosolids. CONCLUSIONS: Land application of biosolids achieves a complete reuse of its nutrients and organic carbon at a relatively low cost. Therefore, land application should become a preferred management option where there is available land, the quality of biosolids meet regulatory requirements, and it is socially acceptable. Intensive energy cropping and forest production using biosolids can help us meet the ever-increasing demand for renewable energy, which can eliminate the contamination potential for food sources, a common social concern about land application of biosolids. In recent years, increasing numbers of national and local governments have adopted more stringent regulations toward biosolid management. Under such a political climate, biosolids producers will have to develop multireuse strategies for biosolids to avoid being caught because a single route management practice might be under pressure at a short notice. Conventional incineration systems for biosolids management generally consume more energy than they produce and, although by-products may be used in manufacturing, this process cannot be regarded as a beneficial use of biosolids. However, biosolids are likely to become a source of renewable energy and produce 'carbon credits' under the increasingly popular, low-carbon economy policy. RECOMMENDATIONS AND PERSPECTIVES: To manage biosolids in a sustainable manner, there is a need for further research in the following areas: achieving a higher degree of public understanding and acceptance for the beneficial use of biosolids, developing cost-efficient and effective thermal conversions for direct energy recovery from biosolids, advancing technology for phosphorus recovery, and selecting or breeding crops for efficient biofuel production.     

Using phytoremediation technologies to upgrade waste water treatment in Europe

Goal, Scope and Background One of the burning problems of our industrial society is the high consumption of water and the high demand for clean drinking water. Numerous approaches have been taken to reduce water consumption, but in the long run it seems only possible to recycle waste water into high quality water. It seems timely to discuss alternative water remediation technologies that are fit for industrial as well as less developed countries to ensure a high quality of drinking water throughout Europe. Main Features The present paper discusses a range of phytoremediation technologies to be applied in a modular approach to integrate and improve the performance of existing wastewater treatment, especially towards the emerging micro pollutants, i.e. organic chemicals and pharmaceuticals. This topic is of global relevance for the EU. Results Existing technologies for waste water treatment do not sufficiently address increasing pollution situation, especially with the growing use of organic pollutants in the private household and health sector. Although some crude chemical approaches exist, such as advanced oxidation steps, most waste water treatment plants will not be able to adopt them. The same is true for membrane technologies. Discussion Incredible progress has been made during recent years, thus providing us with membranes of longevity and stability and, at the same time, high filtration capacity. However, these systems are expensive and delicate in operation, so that the majority of communities will not be able to afford them. Combinations of different phytoremediation technologies seem to be most promising to solve this burning problem. Conclusions To quantify the occurrence and the distribution of micropollutants, to evaluate their effects, and to prevent them from passing through wastewater collection and treatment systems into rivers, lakes and ground water bodies represents an urgent task for applied environmental sciences in the coming years. Recommendations Public acceptance of green technologies is generally higher than that of industrial processes. The EU should stimulate research to upgrade existing waste water treatment by implementing phytoremediation modules and demonstrating their reliability to the public.     

A comparison between two full-scale MBR and CAS municipal wastewater treatment plants: techno-economic-environmental assessment

A holistic assessment procedure has been used in this study for comparing conventional activated sludge (CAS) and membrane bioreactor (MBR) processes for the treatment of municipal wastewater. Technical, social, administrative, economic and environmental impacts have been evaluated based on 1 year of operational data from three full-scale lines (one MBR and two CAS) working in parallel in a large municipal treatment plant. The comparative assessment evidences a slight advantage of the conventional process in the studied case, essentially due to lower costs, complexity and energy consumption. On the other hand, the MBR technology has a better social acceptance and similar overall environmental footprint. Although these results are influenced by site-specific parameters and cannot be generalized, the assessment procedure allowed identifying the most important factors affecting the final scores for each technology and the main differences between the compared technologies. Local conditions can affect the relative importance of the assessed impacts, and the use of weighting factors is proposed for better tailoring the comparative assessment to the local needs and circumstances. A sensitivity analysis on the weighted final scores demonstrated how local factors are very important and must be carefully evaluated in the decision making process.     

Energy return on investment: toward a consistent framework

Numerous technologies have been proposed as partial solutions to our declining fossil energy stocks. There is a significant need for consistent metrics to compare the desirability of different technologies. The ratio of energy produced to energy consumed by an energy production technology-known as the energy return on investment (EROI)-is an important first indicator of the potential benefits to society. However, EROI analysis lacks a consistent framework and has therefore yielded apparently conflicting results. In this article, we establish a theoretical framework for EROI analysis that encompasses the various methodologies extant in the literature. We establish variations of EROI analysis in two different dimensions based on the costs they include and their handling of nonenergy resources. We close by showing the implications of the different measures of EROI upon estimating the desirability of a technology as well as for estimating its ultimate net energy capacity.     

Arsenate (As) uptake by and distribution in two cultivars of winter wheat (Triticum aestivum L.)

Two cultivars of winter wheat (Triticum aestivum L.) (Jing 411 and Lovrin 10) were used to investigate arsenate (As) uptake and distribution in plants grown in hydroponic culture and in the soil. Results showed that without As addition, Lovrin 10 had higher biomass than Jing 411 in the soil pot experiment; in the hydroponic experiment Lovrin 10 had similar root biomass to and lower shoot biomass than Jing 411. Increasing P supply from 32 to 161 microM resulted in lower tissue As concentrations, and increasing As supply from 0 to 2,000 microM resulted in lower tissue P concentrations. Increasing P supply tended to increase shoot-to-root ratios of As concentrations, and increasing As supply tended to decrease shoot-to-root ratios of As concentrations. Both cultivars invested more in root production under P deficient conditions than under P sufficient conditions. Lovrin 10 invested more biomass production to roots than Jing 411, which might be partly responsible for higher shoot P and As concentrations and higher shoot-to-root ratios of As concentrations. Moreover, Lovrin 10 allocated less As to roots than Jing 411 and the difference disappeared with decreasing P supply.     

Carbonaceous aerosol emissions from India

Budget estimate for carbonaceous aerosols including black carbon (BC) and organic carbon, emitted from the combustion of various fuels, is very important for regional climate studies. Emission factors for carbonaceous aerosols from bio-fuels and soft coke were determined in a controlled combustion study. The emission factors thus obtained along with those available for other fossil fuels consumed in different sectors have been applied to assess the budget for carbonaceous aerosols from India. Preliminary calculations give a range of 1.6–1.8 Tg of carbonaceous aerosols that include 0.4–1.4 Tg of BC. A major (80%) portion of carbonaceous aerosols emitted from India is found to originate from the use of biomass for energy as 70–80% of energy requirement in rural India is met by combustion of traditional bio-fuels.     

Measuring carbon in forests: current status and future challenges

To accurately and precisely measure the carbon in forests is gaining global attention as countries seek to comply with agreements under the UN Framework Convention on Climate Change. Established methods for measuring carbon in forests exist, and are best based on permanent sample plots laid out in a statistically sound design. Measurements on trees in these plots can be readily converted to aboveground biomass using either biomass expansion factors or allometric regression equations. A compilation of existing root biomass data for upland forests of the world generated a significant regression equation that can be used to predict root biomass based on aboveground biomass only. Methods for measuring coarse dead wood have been tested in many forest types, but the methods could be improved if a non-destructive tool for measuring the density of dead wood was developed. Future measurements of carbon storage in forests may rely more on remote sensing data, and new remote data collection technologies are in development.     

Life Cycle Analyses and Resource Assessments

Prof. Ulgiati stresses that we should always use an ecosystem view when transforming energy from one form to another. Sustainable growth and development of both environmental and human-dominated systems require optimum use of available resources for maximum power output. We have to adapt to the laws of nature because nature has to take care of all the waste products we produce. The presentation addresses a much needed shift away from linear production and consumption pattern, toward reorganization of economies and lifestyle that takes complexity—of resources, of the environment and of the economy—into proper account. The best way to reach maximum yield from the different kinds of biomass is to use biorefineries. Biorefinery is defined as the sustainable processing of biomass into a spectrum of marketable products like heat, power, fuels, chemicals, food, feed, and materials. However, biomass from agricultural land must be used for the production of food and not fuel. Prof. Voss focuses on the sustainability of energy supply chains and energy systems. Life cycle analyses (LCA) provides the conceptual framework for a comprehensive comparative evaluation of energy supply options with regard to their resource requirements as well as the health and environmental impact. Full scope LCA considers not only the emissions from plant operation, construction, and decommissioning but also the environmental burdens and resource requirements associated with the entire lifetime of all relevant upstream and downstream processes within the energy chain. This article describes the results of LCA analyses for state-of-the-art heating and electricity systems as well as of advanced future systems. Total costs are used as a measure for the overall resource consumption.     

Recent advances in the application of silica nanostructures for highly improved water treatment: a review

The demand for high-quality safe and clean water supply has revolutionized water treatment technologies and become a most focused subject of environmental science. Water contamination generally marks the presence of numerous toxic and harmful substances. These contaminants such as heavy metals, organic and inorganic pollutants, oil wastes, and chemical dyes are discharged from various industrial effluents and domestic wastes. Among several water treatment technologies, the utilization of silica nanostructures has received considerable attention due to their stability, sustainability, and cost-effective properties. As such, this review outlines the latest innovative approaches for synthesis and application of silica nanostructures in water treatment, apart from exploring the gaps that limit their large-scale industrial application. In addition, future challenges for improved water remediation and water quality technologies are keenly discussed.

     

Comparing growth development of <Emphasis Type="Italic">Myriophyllum</Emphasis> spp. in laboratory and field experiments for ecotoxicological testing

BACKGROUND, GOALS AND SCOPE: Risk assessment of herbicides and the evaluation of contaminated sediments based on algae and the macrophyte Lemna sp. alone may underestimate the potential hazard of certain compounds. Therefore, various test systems with Myriophyllum spp. have been developed recently to assess the phytotoxicity in surface waters and natural sediments. In the present study, experiments investigating the growth development of Myriophyllum spp. were performed in the laboratory under defined conditions and in mesocosms under environmentally realistic exposure conditions to evaluate the suitability of these species as potential standard test organisms in ecotoxicological testing. This study provides data on the endpoints biomass, plant length and root development. MATERIALS AND METHODS: Six independent experiments were performed to investigate the plant development of Myriophyllum spp. under control conditions. The main difference in the experiments was the complexity of the test systems ranging from simple laboratory experiments to complex outdoor mesocosm studies. At the start of each experiment, uniform cuttings of Myriophyllum spp. were placed in vessels with or without sediments to reduce variability between replicates. The endpoints considered in this investigation were biomass (fresh weight of the whole plant), length of the main shoot, length of the side shoots, total length of the plant (calculated from the length of the main and side shoots) and root formation. Root to shoot ratios were calculated as a further measure for plant development. Relative growth rates (RGR) based on plant length (RG(L)R) and on biomass (RG(B)R) were calculated. RESULTS: Despite the various experimental conditions, comparable growth was obtained in all test systems and the variability of endpoints, such as total length and biomass of plants, was low. It was observed that the RGR of M. spicatum in the simple laboratory test system with sediment were comparable to growth data obtained for M. verticillatum and M. spicatum grown in indoor and outdoor mesocosms, thus indicating that Myriophyllum growth tends to increase by the addition of sediment. High variability was determined for the endpoints length of the side shoots, total root length and biomass of roots. DISCUSSION: One challenge for a test design to investigate phytotoxicity on aquatic plants is to obtain good growth of the plants. From the results, it can be concluded that the experimental conditions in the various test systems were suitable to study the plant development of Myriophyllum spp. because obtained growth rates were comparable between laboratory and field investigations. Another challenge for developing a plant biotest system is the definition of sensitive endpoints. Low variability is preferred to detect minor effects of chemicals or polluted sediments on plant development. In our studies, the variability of the endpoints biomass and total length of plant was low and, therefore, they have much potential as endpoints for assessing toxicity. CONCLUSIONS: The methodologies presented in this study have applications within the risk assessment for aquatic plants and have the advantage of assessing effects taking into account the relevant exposure pathways via water and/or sediment for compounds under investigation. RECOMMENDATIONS AND PERSPECTIVES: Setting safe quality criteria for surface water and sediments is one of the challenges authorities are facing today. Myriophyllum spp. is recommended as suitable test species to investigate phytotoxicity in surface water and sediments. These results, thus, might serve as a basis for the compilation of a new harmonised guideline for ecotoxicological testing with aquatic macrophytes.     

Water pollution and degradation in Pearl River Delta,South China

The Pearl River Delta Economic Zone is the most dynamic economic area in South China. One of the major problems in the region is the sustainable utilization of the water resources. On the basis of analysis of the water environment status and pollution sources, it is suggested that domestic sewage is the primary cause of pollution. Two new concepts "degradation coefficient" and "degradation volume" of water resources, due to pollution, which may be used to assess macroscopically the carrying capacity of the water resources and sustainability of the water environment, are proposed by the authors. The results calculated indicate that the volumes of degraded water resources will be up to 204, 352, and 537 million m3 in 2002, 2010, and 2020. It is suggested that water for daily consumption and domestic sewage must be controlled more effectively and there should be cross-regional coordination in tackling problems of water environment.     

Silicon and Rhizophagus irregularis: potential candidates for ameliorating negative impacts of arsenate and arsenite stress on growth,nutrient acquisition and productivity in Cajanus cajan (L.) Millsp. genotypes

Arsenic (As) gets accumulated in plants via phosphorous transporters and water channels and interferes with nutrient and water uptake, adversely affecting growth and productivity. Although, Si and AM have been reported to combat arsenic stress, their comparative and interactive roles in ameliorating As V and As III toxicities have not been reported. Study evaluated effects of Si and Rhizophagus irregularis on growth, As uptake and yield under arsenate and arsenite stress in two pigeonpea genotypes (metal tolerant—Pusa 2002 and metal sensitive—Pusa 991). Higher As accumulation and translocation was observed in As III treated roots of Pusa 991 than those of Pusa 2002 when compared with As V. Roots were more negatively affected than shoots which led to a significant decline in nutrient uptake, leaf chlorophylls, and yield, with As III inducing more negative effects. Pusa 2002 established more effective mycorrhizal symbiosis and had higher biomass than Pusa 991. Si was more effective in inducing shoot biomass while AM inoculation significantly improved root biomass. AM enhanced Si uptake in roots and leaves in a genotype dependent manner. Combined application of Si and AM were highly beneficial in improving leaf water status, chlorophyll pigments, biomass, and productivity. Complete amelioration of negative impacts of both concentrations of As V and lower concentration of As III were recorded under +Si +AM in Pusa 2002. Results highlighted great potential of Si in improving growth and productivity of pigeonpea through R. irregularis under As V and As III stresses.

     

Petroleum Pollutant Degradation by Surface Water Microorganisms (8 pp)

Background, Aims and Scope It is well known that the composition of petroleum or some of its processing products changes in the environment mostly under the influence of microorganisms. A series of experiments was conducted in order to define the optimum conditions for an efficient biodegradation of petroleum pollutant, or bioremediation of different segments of the environment. The aim of these investigations was to show to what extent the hydrocarbons of a petroleum pollutant are degraded by microbial cultures which were isolated as dominant microorganisms from a surface water of a wastewater canal of an oil refinery and a nitrogen plant. Biodegradation experiments were conducted on one paraffinic, and one naphthenic type of petroleum during a three month period under aerobic conditions, varying the following parameters: Inorganic (Kp) or an organic medium (Bh) with or without exposition to light. Methods Microorganisms were analyzed in a surface water sample from a canal (Pančevo, Serbia), into which wastewater from an oil refinery and a nitrogen plant is released. The consortia of microorganisms were isolated from the water sample (most abundant species: Phormidium foveolarum - filamentous Cyanobacteria, blue-green algae and Achanthes minutissima, diatoms, algae). The simulation experiments of biodegradation were conducted with the biomass suspension and crude oils Sirakovo (Sir, paraffinic type) and Velebit (Ve, naphthenic type). After a three month period, organic substance was extracted by means of chloroform. In the extracts, the content of saturated hydrocarbons, aromatic hydrocarbons, alcohols and fatty acids was determined (the group composition). n-Alkanes and isoprenoid aliphatic alkanes, pristane and phytane, in the aliphatic fractions, were analyzed using gas chromatography (GC). Total isoprenoid aliphatic alkanes and polycyclic alkanes of sterane and triterpane types were analyzed by GC-MS. Results and discussion. Paraffinic type petroleums have a significant loss of saturated hydrocarbons. For naphthenic type petroleum, such a trend has not been observed. The most intensive degradation of n-alkanes and isoprenoid aliphatic alkanes (in paraffinic oil) and isoprenoids (in naphthenic oil) was observed using the inorganic medium Kp in the light; the microbial conversion is somewhat lower with Kp in the dark; with organic medium Bh in the light the degradation is of low intensity; with the same medium in the dark the degradation is hardly to be seen. Steranes and triterpanes were not affected by microbial degradation under the conditions used in our experiments. Obviously, the petroleum biodegradation was restricted to the acyclic aliphatics (n-alkanes and isoprenoids). Conclusion Phormidium foveolarum (filamentous Cyanobacteria - blue-green algae) and Achanthes minutissima (diatoms, algae), microbial cultures isolated as dominant algae from a surface water in a wastewater canal of an oil refinery and a nitrogen plant, have degradable effects dominantly involving petroleum hydocarbons. Petroleum microbiological degradation is more intensive when inorganic medium (in the light) is applied. Having in mind that the inorganic pollutants have been released into the canal as well, this medium reflects more the natural environmental conditions. Polycyclic alkanes of sterane and triterpane type, in spite of the fact that these compounds could be degraded, have remained unchanged regarding abundance and distribution. Since this is the case even for naphthenic type petroleum (which is depleted in n-alkanes), it can be concluded that the biodegradation of petroleum type pollutants, under natural conditions, will be restrained to the n-alkane and isoprenoid degradation. Recommendation and Outlook Performed experiments and simulations of petroleum microbiological degradation may serve for the prediction of the fate of petroleum type pollutants, as well as for definition of conditions for bioremediation of some environmental segments.     

Highly efficient biosorptive removal of lead from industrial effluent

This study has been focused on the efficient removal of Pb (II) from contaminated waters by biosorption using plant derived material. Accordingly an indigenous shrub, Tinospora cordifolia has been identified as the most suitable biosorbent. The plant biomass was subjected to optimization of various parameters such as the pH, equilibrium time, dosage, concentration, temperature and the applicable adsorption models. The optimum pH identified was 4.0 with a contact time of 60 min at room temperature (27 ± 2 °C). The experimental data fitted well to adsorption isotherms and the uptake capacity of Pb (II) was found to be 20.83 and 63.77 mg/g in batch mode and column mode, respectively. The high correlation factors obtained for Langmuir and Freundlich models indicated that both models were obeyed by the system. Kinetic study for adsorption of Pb (II) follow only pseudo second order rate of reaction. The accumulation of lead in biomass was confirmed by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) analysis. The FTIR analysis indicated the involvement of hydroxyl (−OH), alkenes (=CH) and carbonyl group (C = O) chelates in metal binding. The SEM and EDX analysis showed the structural changes and the filling of voids in the biomass thus, it indicated the metal-binding mechanism. In elution studies, the 0.1 M Na₂CO₃ was found to be the best with about 71% elution of the adsorbed metal. The biomass was then used for the removal of Pb (II) in synthetic and real wastewater samples from a lead-acid battery industry. It is also noteworthy that even at a very high concentration of 450 mg/L, the biomass was showing about 92% removal. The result is to establish the efficacy of T. cordifolia as a very good bioadsorbent for the Pb (II) removal from contaminated water.

     

Food Security: Crops for People Not for Cars

Humankind is currently faced with the huge challenge of securing a sustainable energy supply and biofuels constitute one of the major options. However, the commercially traded edible crops are barely sufficient to meet food demand of the present world population. Certain regions, for example EU-27, do not even have a sufficient indigenous crop production. Of this follows that motor biofuels based on edible crops should be avoided. To replace more than some percent of the fossil motor fuels, non-edible biomass—rest products and wastes—should instead be considered for conversion to biofuels. In this way, about 10% of the current fossil fuels can be replaced. Feeding a world population expected to grow by some 50% during the next 50 years will be a major challenge. For environmental reasons it seems that agricultural land cannot be expanded very much, maybe not at all. The solution to the increasing food demand seems therefore to be using the present crop production more efficiently and increasing output from present agricultural land, maintaining biodiversity and climate stability within reasonable limits. In the future, agriculture will need more energy and more water irrigation. Food production is, however, already very energy demanding, requiring several times more externally provided energy than the energy content of the food itself. A sufficient energy supply will be a key issue for the future farming!     

Impact of composting strategies on the treatment of soils contaminated with organic pollutants

Chemical pollution of the environment has become a major source of concern. Studies on degradation of organic compounds have shown that some microorganisms are extremely versatile at catabolizing recalcitrant molecules. By harnessing this catabolic potential, it is possible to bioremediate some chemically contaminated environmental systems. Composting matrices and composts are rich sources of xenobiotic-degrading microorganisms including bacteria, actinomycetes and lignolytic fungi, which can degrade pollutants to innocuous compounds such as carbon dioxide and water. These microorganisms can also biotransform pollutants into less toxic substances and/or lock up pollutants within the organic matrix, thereby reducing pollutant bioavailability. The success or failure of a composting/compost remediation strategy depends however on a number of factors, the most important of which are pollutant bioavailability and biodegradability. This review discusses the interactions of pollutants with soils; look critically at the clean up of soils contaminated with a variety of pollutants using various composting strategies and assess the feasibility of using composting technologies to bioremediate contaminated soil.     

Subisokinetic Sampling Errors for Aircraft Turbine Engine Smoke Probes

The years 2012 and beyond seem likely to record major changes in energy use and power generation. The Japanese tsunami has resulted in large countries either scaling back or abolishing the future use of nuclear energy. The discovery of what seems like vast amounts of economically deliverable natural gas has many forecasting a rapid switch from coal- to gas-fired generating plants. On the other hand, environmentalists have strong objections to the production of natural gas and of petroleum by hydraulic fracturing from shale, or by extraction of heavy oil. They believe that global warming from the use of fossil fuels is now established beyond question. There has been rapid progress in the development of alternative energy supplies, particularly from on-shore and off-shore wind. Progress toward a viable future energy mix has been slowed by a U.S. energy policy that seems to many to be driven by politics. The author will review the history of power and energy to put all of the above in context and will look at possible future developments. He will propose what he believes to be an idealized energy policy that could result in an optimum system that would be arrived at democratically.

Implications The combustion energy sector is believed to be a dominant component of environmental pollution. A multitude of technologies support this sector and many have the potential to replace elements of this sector with low-polluting processes. This review covers a selection of energy production technologies that are important for the future. A historical perspective is provided to advance the general knowledge about these technologies as options for the world's increasing demand for energy. In addition, a decarbonization policy option for an energy fee is proposed as an alternative to carbon taxation or cap-and-trade approaches.