Characterization of biomass pyrolysis vapors with molecular beam, single photon ionization time-of-flight mass spectrometry

A single photon ionization, molecular beam sampling, reflectron time-of-flight mass spectrometer (SPI/MBTOFMS) has been developed and used to study pyrolysis products from a selection of biomass materials. Spectra are characterized by high resolution and decreased fragmentation compared to electron-impact ionization mass spectra from related molecular beam mass spectrometer systems equipped with quadrupole mass analyzers.     

Size-exclusion chromatographic study of ECF and TCF softwood kraft pulp bleaching liquors

Background, aims, and scope  

Currently, elemental chlorine-free (ECF) and totally chlorine-free (TCF) bleaching systems are widely used for pulp production. Low and medium molecular weight lignin break-down products are known to have harmful effects on the environment. According to some recent results, also high molecular weight (HMW) material consisting mainly of lignin and carbohydrates may cause toxic effects to the environment. For these reasons, toxicity and structure studies of HMW materials are of great importance. This investigation is a part of a larger project to obtain more structure information of HMW materials and toxicity of ECF and TCF bleaching effluents. Size-exclusion chromatography (SEC) has been commonly used for the characterization of organic macromolecules such as lignin, but to our knowledge, no reports have appeared dealing with the comparison of SEC of ECF and TCF bleaching liquors. The aim of the present study was to get more information about the molecular weight distribution (MWD) of HMW fractions of waste liquors from ECF and TCF bleaching sequences by SEC.     

Adsorption of phenolics on activated carbon--impact of pore size and molecular oxygen

The impact of pore size of activated carbon fibers (ACFs) on adsorption capacity and on the potential for oligomerization of phenolic compounds on the surface of ACFs in the presence of molecular oxygen has been investigated in this study. Compared with granular activated carbon (GAC), ACFs have unique pore size distributions, suitable to be used to elucidate the effect of pore structure on adsorption. Adsorption isotherm data were collected for o-cresol and 2-ethylphenol on four ACFs (ACC-10, ACC-15, ACC-20, and ACC-25) with different micropore volumes and BET surface area and on one type of GAC bituminous base. These isotherms were collected under anoxic (absence of molecular oxygen) and oxic (presence of molecular oxygen) conditions. No significant impact of the presence of molecular oxygen on adsorption capacity was noted for ACC-10. ACC-10 has an average pore width of 19.2 A and total pore volume of 0.43 cm3g(-1). On the other hand, for the remaining ACFs, which have larger average pore width and larger pore volume, significant increase in the adsorptive capacity had been observed when molecular oxygen was present. The GAC gave the greatest difference between anoxic and oxic conditions when compared to all the ACFs studied. Binary adsorption of o-cresol and 2-ethylphenol on ACFs with the least pore size (ACC-10) also showed no significant differences between oxic and anoxic environment. The binary system under both anoxic and oxic conditions was well predicted by the ideal adsorbed solution theory (IAST).     

Predictions for isomer distributions of toxic dioxins and furans in selected industrial combustion processes

Three thermodynamic databases of polychlorinated dibenzo-p-dioxins and dibenzo-furans (PCDD/Fs) have been used to simulate the PCDD/F isomer distribution in industrial combustion processes. The three databases had been derived using the Group Additivity approach and two computational molecular modelling methods, Modified Neglect of Diatomic Overlap (MNDO) and Parametrized Model 3 (PM3), respectively. The predictions of the toxic PCDD/F isomer distributions using the three different databases have been compared with measured values from industrial processes. An excellent agreement between the predictions using the MNDO method and the measured data has been obtained. It is concluded that the PCDD/F isomer distributions within each group observed in these combustion processes may be thermodynamically controlled.     

Gas phase precursors to anthropogenic secondary organic aerosol: Using the Master Chemical Mechanism to probe detailed observations of 1,3,5-trimethylbenzene photo-oxidation

A detailed gas-phase photochemical chamber box model, incorporating the Master Chemical Mechanism (MCMv3.1) degradation scheme for the model anthropogenic aromatic compound 1,3,5-trimethylbenzene, has been used to simulate data measured during a series of aerosol chamber experiments in order to evaluate the mechanism under a variety of VOC/NO_x conditions.The chamber model was used in the interpretation of comprehensive high (mass and time) resolution measurements of 1,3,5-trimethylbenzene and its photo-oxidation products recorded by a Chemical Ionisation Reaction Time-of-Flight Mass Spectrometer (CIR-TOF-MS). Supporting gas and aerosol measurements have also enabled us to explore the ‘missing link’ between the gas and aerosol phases. Model-measurement comparisons have been used to gain insight into the complex array of oxygenated products formed, including the peroxide bicyclic ring opening products (α,β-unsaturated-γ-dicarbonyls and furanones) and the O₂-bridged peroxide bicyclic ring-retaining products. To our knowledge this is the first time such high molecular weight species, corresponding to various peroxide bicyclic products represented in the MCMv3.1, have been observed in the gas-phase. The model was also used to give insight into which gas-phase species were participating in SOA formation, with the primary and secondary peroxide products, formed primarily under low NO_x conditions, identified as likely candidates.     

Comparative analysis of the structure of carbon materials relevant in combustion

The determination of the structure of carbon materials is an analytical problem that join the research scientific communities involved in the chemical characterization of heavy fuel-derived products (heavy fuel oils, coal-derived fuels, shale oil, etc.) and of carbon materials (polycyclic aromatic compounds, tar, soot) produced in many combustion processes.

The knowledge of the structure of these “difficult” fuels and of the carbon materials produced by incomplete combustion is relevant to research for the best low-environmental impact operation of combustion systems; but an array of many analytical and spectroscopic tools are necessary, and often not sufficient, to attempt the characterization of such complex products and in particular to determine the distribution of molecular masses.

In this paper the size exclusion chromatography using N-methyl-pyrrolidinone as eluent has been applied for the characterization of different carbon materials starting from typical carbon species, commercially available like polyacenaphthylene, carbon black, naphthalene pitch up to combustion products like soot and soot extract collected in fuel-rich combustion systems. Two main fractions were detected, separated and molecular weights (MWs) determined by comparison with polystyrene standards: a first fraction consisted of particles with very large molecular masses (>100 000 u); a second fraction consisted of species in a relatively small MW range (200–600 u). The distribution of these fractions changes in dependence on the carbon sample characteristics.

Fluorescence spectroscopy applied on the fractions separated by size-exclusion chromatography has been used and comparatively interpreted giving indications on the differences and similarities in chemical structure of such different materials.     

Identification of arsenobetaine in sole,lemon sole,flounder, dab,carb and shrimps by field desorption and fast atom bombardment mass spectrometry

Organo-arsenic has been isolated from sole, lemon sole, flounder, dab, crab and shrimps by extraction or ion-exchange in combination with thin-layer chromatography. An alkaline digestion of the samples, followed by a reduction with sodiumborohydride leads to the formation of trimethylarsine. The behaviour of the organo-arsenic compound was very similar to that of synthesized arsenobetaine. Field desorption mass spectrometry (FDMS) can be used to identify arsenobetaine in the isolates. Sufficient purification by thin-layer chromatography is found to be a prerequisite for the detection of a protonated molecular ion of arsenobetaine. If this situation is not met acid enhanced FDMS or Fast Atom Bombardment mass spectrometry in high resolution can be used successfully.     

Objections to the use of polyvinyl fluoride in smogchamber experiments

The interference of low molecular weight additives in polyvinyl fluoride film (PVF; “Tedlar”) used for the construction of smogchambers has been investigated by means of irradiation experiments, chemical modelling and analytical techniques. The results indicate that PVF is unsuitable as a wall material for smogchambers, owing to interference in hydrocarbon measurements, possibly NO_x-measurements, and in the formation of ozone and peroxyacetyl nitrate. This information is thought to be of interest to present and future workers in air pollution research.     

Capillary electrophoresis finger print technique (CE-SSCP): an alternative tool for the monitoring activities of HAB species in Baja California Sur Costal

In Mexican waters, there is no a formal and well-established monitoring program of harmful algal blooms (HAB) events. Until now, most of the work has been focused on the characterization of organisms present in certain communities. Therefore, the development of new techniques for the rapid detection of HAB species is necessary. Capillary electrophoresis finger print technique (CE-SSCP) is a fingerprinting technique based on the identification of different conformers dependent of its base composition. This technique, coupled with capillary electrophoresis, has been used to compare and identify different conformers. The aim of this study was to determine if CE-SSCP analysis of ribosomal RNA (rRNA) gene fragments could be used for a rapid identification of toxic and harmful HAB species to improve monitoring activities along the coasts of Baja California Sur, Mexico.Three different highly variable regions of the 18S and 28S rRNA genes were chosen and their suitability for the discrimination of different dinoflagellate species was assessed by CE-SSCP.The CE-SSCP results obtained for the LSU D7 fragment has demonstrated that this technique with this gene region could be useful for the identification of the ten dinoflagellates species of different genera.We have shown that this method can be used to discriminate species and the next step will be to apply it to natural samples to achieve our goal of molecular monitoring for toxic algae in Mexican waters. This strategy will offer an option to improve an early warning system of HAB events for coastal BCS, allowing the possible implementation of mitigation strategies. A monitoring program of HAB species using molecular methods will permit the analysis of several samples in a short period of time, without the pressure of counting with a taxonomic expert in phytoplankton taxonomy.     

The effect of nitroaromatics' composition on their toxicity in vivo: novel, efficient non-additive 1D QSAR analysis

Novel 1D QSAR approach that allows analysis of non-additive effects of molecular fragments on toxicity has been proposed. Twenty-eight nitroaromatic compounds including some well-known explosives have been chosen for this study. The 50% lethal dose concentration for rats (LD50) was used as the estimation of toxicity in vivo to develop 1D QSAR models on the framework of Simplex representation of molecular structure. The results of 1D QSAR analysis show that even the information about the composition of molecules provides the main trends of toxicity changes. The necessity of consideration of substituents' mutual impacts for the development of adequate QSAR models of nitroaromatics' toxicity was demonstrated. Statistic characteristics for all the developed partial least squares QSAR models, except the additive ones are quite satisfactory (R2=0.81-0.92; Q2=0.64-0.83; R2 test=0.84-0.87). A successful performance of such models is due to their non-additivity i.e. possibility of taking into account the mutual influence of substituents in benzene ring which plays the governing role for toxicity change and could be mediated through the different C-H fragments of the ring. The correspondence between observed and predicted by these models toxicity values is good. This allowing combine advantages of such approaches and develop adequate consensus model that can be used as a toxicity virtual screening tool.