鲤鱼对纳米二氧化钛的生物富集

建立了浓硫酸-硫酸铵酸化消解-ICP测定水样及鱼样中纳米二氧化钛的方法,并研究了纳米二氧化钛在鲤鱼(Cyprinus carpio)体内的富集.酸化消解-ICP测定方法对20.0 mg/L纳米二氧化钛水样,测定的相对标准偏差仅为4.53%.纳米二氧化钛在水样和鱼样中的加标回收率分别为94%～104%和90%～103%,可以精确测定环境样品中纳米二氧化钛浓度.纳米二氧化钛在鱼体内有较高的富集,暴露于3 mg/L、10 mg/L纳米二氧化钛悬浮液的鲤鱼,25 d时鱼体内的二氧化钛浓度分别达到2.1 mg/g和5.8 mg/g.达到平衡时,BCF分别为675.5和595.4.纳米二氧化钛在鱼鳃、内脏中有很大程度的富集,肌肉部分对纳米二氧化钛的富集最少.     

冠醚交联壳聚糖在Cr(Ⅲ、Ⅵ)分析中的应用

研究冠醚交联壳聚糖（DCTS）对铬的吸附行为，建立了DCTS富集分离测定环境水样中痕量铬Cr(Ⅲ、Ⅵ）的新方法。在pH=7.5的溶液中，DCTS对铬的吸附率为100％，富集倍数可达50倍以上，用0.20g/L酒石酸2mL溶液可定量解吸总铬，用0.20g/L柠檬酸溶液2mL可定量解吸Cr(Ⅲ）。本法用于配置的南极水样中超痕量Cr(Ⅲ、Ⅵ）的测定，回收率98％－112％，变异系数1.8%，检出限0.004μg/L。     

ABTT浊点萃取-分光光度法测定废水中的痕量镍*

利用非离子表面活性剂Triton X-114在温度高于其浊点时形成相分离行为,建立了浊点萃取-分光光度法测定水溶液中痕量镍的新方法,探讨优化了以1-偶氮苯-3-噻唑-三氮烯(ABTT)为显色剂,Triton X-114浊点萃取富集痕量镍的实验条件。在最大吸收波长为λ=540 nm外,其表观摩尔吸光系数为8.064×105 L/(mol.cm),线性范围为0～0.35μg/mL,相关系数为0.9990。在优化的实验条件下,进行了痕量镍的分析,加标回收率为97.9%～102.1%,应用于水溶液中痕量镍的测定,结果令人满意。     

CTMAB为萃取剂石墨炉原子吸收法测定水中痕量铋

原子吸收法测定水样中痕量铋国外已有报道。因实际水样中铋的含量极低,直接测定相当困难,故常需要预富集处理。已使用的方法有共沉淀富集、离子交换富集、浮选分离富集、萃取后蒸发浓缩等多种方法。但这些方法操作费时,有的选择性较差。本工作表明,以水溶性季胺盐溴代十六烷基三甲基胺(CTMAB)作为萃取剂,能一次定量萃取水样中的痕量铋,并能与大量共存离子分离,进而用高灵敏度无焰原子吸收法测定。该方法简单、快速,适用于水样品中ppb级痕量铋的测定。以含铋4.5 ppb的水样测定,方法的变异系数为8.5％。对ppb级的样品进行标准加入试验,回收率为95％—105％。     

矿山排水污染稻田土壤胶体对砷的吸附研究

为研究矿山排水污染土壤胶体对砷的吸附影响,文章以高砷污染区和背景区土壤的胶体在不同的pH、离子强度以及好氧/厌氧淹水条件下对As(Ⅴ)的吸附进行对比试验。结果表明:土壤胶体对As(Ⅴ)的吸附量随pH的增大而减少,且污染区胶体比背景区胶体对As(Ⅴ)的吸附量大;离子强度越大,胶体对As(Ⅴ)的吸附量越大,Ca(NO_3)_2浓度从0.001 mol/L增至0.1 mol/L时,污染区与背景区胶体对As(Ⅴ)的吸附量分别增加了30.57%、50.25%;厌氧淹水后的胶体对As(Ⅴ)的吸附量低于好氧条件下的胶体,解吸量较高,且厌氧淹水后污染区胶体与背景区胶体相比无明显吸附优势,而好氧条件下污染区胶体的解吸率低于背景区胶体,说明厌氧淹水后的胶体不易吸附且易释放As(Ⅴ)。因此,低p H和高离子强度以及好氧的条件有利于土壤胶体对砷的吸附。     

纳米TiO_2晶体胶体在居室净化中的应用研究

纳米二氧化钛晶体胶体膜的光催化降解研究实验表明,在普通的日光灯下,经过72h的照射,苯与甲苯的降解率分别为96.7%和97.7%,乙硫醇、甲醛与氨几乎100%降解。实际居室环境实验应用研究结果显示,经过纳米二氧化钛胶体处理后的居室,一周后其空气质量达到相应国家标准。因此,纳米二氧化钛胶体形成的纳米晶体膜对空气污染净化是非常有效的,并具有良好的杀菌防霉效果。     

水体新型污染物现场快速富集方法的研究

该文采用新型胶束-乳液聚合法制备了两亲多孔吸附材料作为固相萃取吸附剂,并且为其配套研制了一种可用于现场大体积富集水质中痕量污染物的全自动固相萃取采样装置(LVED)。使用新研制的装置建立了LVED-HPLC-MS/MS方法快速测定环境水样中40种痕量新型污染物的方法,实验优化了大体积固相萃取条件并进行方法学验证,证明该方法具有良好的线性关系(r~2≥0.992),以及较低的检出限(0.002～0.10 ng/L)。将此方法用于实际环境水样中新型污染物的现场富集与检测,不同污染物的加标回收率分别为78.0%～107%,部分污染物实际检测浓度在0.05～90.5 ng/L。该方法是一种简便、快速、高效的现场大体积萃取环境水样中痕量新型污染物的新方法,具有应用和推广前景。     

二氧化锰棉柱富集水中痕量铅--石墨炉原子吸收光度法测定

水中痕量铅的测定对环境水质监测和卫生评价有着重要的意义。为了准确地测定水中痕量铅,通常需要对水样进行预富集处理。目前报道的富集方法很多,最常见的为有机溶剂萃取法、共沉淀分离法和离子交换树脂分离法等。 最近,国外有人利用MnO_2能吸附溶液中各种阳离子的特性,提出用MnO_2富集水中     

固相萃取法分离富集污水样品中痕量壬基酚

本文结合气相色谱质谱选择离子(GCMS∑SIM)定量分析壬基酚含量,对固相萃取技术提取富集污水和再生水样品中痕量壬基酚的操作条件和参数进行了研究。研究结果表明,OasisRHLB固相萃取柱对壬基酚具有优良吸附保留性能,多级混合洗脱方式的洗脱效率达97.01%;测定结果准确度和精密度满足要求。     

[Bmim]PF_6溶剂浮选UV-Vis检测水中四环素类抗生素

建立了一种分离/富集的新体系——离子液体气浮溶剂浮选,该体系集离子液体萃取和气浮溶剂浮选优势于一体,以离子液体1-丁基-3-甲基咪唑六氟磷酸盐([Bmim]PF)6和乙酸乙酯(EA)混合溶剂为浮选溶剂,以稀土金属离子La(Ⅲ)或Ce(Ⅲ)为捕集剂,分离/富集了水中的四环素类抗生素,并用紫外-可见分光光度法测定其总含量,线性范围分别为0.0～34μg/L、0～23.0μg/L,表观摩尔吸光系数分别为ε390=1.92×105L/(mol·cm),ε380=1.15×105L/(mol·cm)。实测了鱼塘水样,加标回收率为84.06%～106.15%,RSD3.31%。研究结果表明:该方法灵敏度高、选择性好、富集倍数大、污染小,适用于环境水样中痕量四环素类抗生素的分离分析。     

Simultaneous preconcentration of cadmium and lead in water samples with silica gel and determination by flame atomic absorption spectrometry

A new method that utilizes pretreated silica gel as an adsorbent has been developed for simultaneous preconcentration of trace Cd(II) and Pb(II) prior to the measurement by flame atomic absorption spectrometry. The effects of pH, the shaking time, the elution condition and the coexisting ions on the separation/preconcentration conditions of analytes were investigated. Under optimized conditions, the static adsorption capacity of Cd(II) and Pb(II) were 45.5 and 27.1mg/g, the relative standard deviations were 3.2% and 1.7% (for n = 11), and the limits of detection obtained were 4.25 and 0.60 ng/mL, respectively. The method was validated by analyzing the certified reference materials GBW 07304a (stream sediment) and successfully applied to the analysis of various treated wastewater samples with satisfactory results.     

Particle concentration effect in adsorption/desorption of Zn（Ⅱ） on anatase type nano TiO2

Adsorption/desorption in a new Zn(II)-TiO2 adsorption system was investigated at different particle concentrations (Cp). TEM, SEM and XRD analyses revealed that the TiO2 particles were an aggregation of nano-sized (approximately 10 nm) pure anatase-type TiO2. Adsorption experiments were carried out with particle concentrations of 100, 400 and 1000 mg/L, and their adsorption isotherms were found to decline successively, showing an obvious Cp effect. Desorption experiments indicated that adsorption in this system was irreversible, and the irreversibility increased with increasing Cp. These phenomena could be explained by the MEA (metastable equilibrium adsorption) theory and the Cp effect could be modeled well with an MEA-Freundlich-type Cp effect isotherm equation. This study may help understand environmental behavior of contaminants on ultrafine natural particles.     

3,5-二硝基水杨酸表面修饰纳米Ti2吸附对硝基苯酚

化学吸附法合成3,5-二硝基水杨酸表面修饰的TiO₂纳米粒子,TiO₂表面修饰后呈浅黄色,TiO₂表面羟基与3,5-二硝基水杨酸发生类似于醇和酸间的酯化反应.表层链接有苯环,极性减弱,非极性增强,在水、苯、乙醇中均分散性良好,与芳香族污染物的亲合力增强,有利于吸附去除芳香族污染物.表面修饰的TiO₂纳米粒子20mg,在最佳吸附pH值3、吸附时间10min,对100mL对硝基苯酚(3～10 mg/L)的吸附率可由改性前的43%增至99.9%.该法吸附效率高,可直接达到一级排放标准,提供了深度处理对硝基苯酚废水的新方法.     

Selective adsorption of silver ions from aqueous solution using polystyrene-supported trimercaptotriazine resin

Trimercaptotriazine-functionalized polystyrene chelating resin was prepared and employed for the adsorption of Ag(I) from aqueous solution. The adsorbent was characterized according to the following techniques: Fourier transform infrared spectroscopy, elemental analysis, scanning electron microscopy and the Brunauer-Emmet-Teller method. The effects of initial Ag(I) concentration, contact time, solution pH and coexisting ions on the adsorption capacity of Ag(I) were systematically investigated. The maximum adsorption capacity of Ag(I) was up to 187.1 mg/g resin at pH 0.0 and room temperature. The kinetic experiments indicated that the adsorption rate of Ag(I) onto the chelating resin was quite fast in the first 60 min and reached adsorption equilibrium after 360 min. The adsorption process can be well described by the pseudo second-order kinetic model and the equilibrium adsorption isotherm was closely fitted by the Langmuir model. Moreover, the chelating resin could selectively adsorb more Ag(I) ions than other heavy metal ions including: Cu(II), Zn(II), Ni(II), Pb(II) and Cr(III) during competitive adsorption in the binary metal species systems, which indicated that it was a highly selective adsorbent of Ag(I) from aqueous solution.     

菌株Dyella ginsengisoli LA-4吸附Ni~(2+)的条件优化及特性研究

主要考察了菌株Dyella ginsengisoli LA-4对重金属Ni2+的吸附性能,同时,利用表面响应法对菌株Dyella ginsengisoli LA-4吸附Ni2+的条件(接种量、pH、Ni2+浓度等)进行了优化,并考察了其动力学及吸附等温曲线特性.实验结果表明,菌株Dyella ginsengisoli LA-4吸附Ni2+的最优条件为:接种量10.64 g.L-1,pH为6.50,Ni2+浓度为19.20 mg.L-1,此时的Ni2+最大去除率为99%.动力学分析表明,吸附平衡时间约为30 min,吸附可分为表面快速吸附和缓慢重金属积累两个阶段.利用Langmuir吸附模型能较好地描述菌株Dyella ginsengisoli LA-4对Ni2+的等温吸附行为,最大吸附量为25.81 mg.g-1.     

Evaluation of the adsorption potential of titanium dioxide nanoparticles for arsenic removal

The adsorption potential of titanium dioxide (TiO2) nanoparticles for removing arsenic from drinking water was evaluated. Pure and iron-doped TiO2 particles are synthesized via sol-gel method. The synthesized TiO2 nanoparticles were then immobilized on ordinary sand for adsorption studies. Adsorption isotherms were conducted on the synthesized nanoparticles as well as the sand coated with TiO2 nanoparticles under varying conditions of air and light, namely, the air-sunlight (A-SL), air-light (AL), air-dark (AD) and nitrogen-dark (ND). X-Ray diffraction (XRD) analysis showed that the pure and the iron-doped TiO2 nanoparticles were in 100% anatase crystalline phase with crystal sizes of 108 and 65 nm, respectively.Adsorption of arsenic on the three adsorbents was non-linear that could be described by the Freundlich and Langmuir adsorption models. Iron doping enhanced the adsorption capacity of TiO2 nanoparticle by arresting its grain growth and making it visible light responsive resulting in a higher affinity for arsenic. Similarly, the arsenic removal by adsorption on the sand coated with TiO2 nanoparticles was the highest among the three types of sand used. In all cases, As(V) adsorbed more compared with As(III). Solution pH appeared to be the most important factor in controlling the amount of arsenic adsorbed.     

纳米TiO2薄膜在不同基质表面的负载及光催化性能

以釉面陶瓷和普通钠钙玻璃为载体,用溶胶凝胶法在其表面进行了纳米TiO2薄膜的负载.采用X射线衍射法(XRD)、扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)对薄膜进行了表征与分析.结果表明,TiO2为完全的锐钛矿型,平均粒径约为15nm;TiO2薄膜在2种载体上分布均匀,膜厚约为300nm;TiO2薄膜在釉面陶瓷表面呈连续分布,而在玻璃表面上出现了破裂现象;2种载体中的一些基质离子在TiO2薄膜均有渗透.光降解实验表明,2种载体上的TiO2薄膜对亚甲基蓝的降解均符合一级反应动力学.TiO2/釉面陶瓷催化活性大于TiO2/玻璃,该薄膜对实际生产多菌灵废水具有催化降解作用.2种载体上的TiO2薄膜重复使用20次,对亚甲基蓝的去除率降低约2%.     

单波长、双波长、三波长分光光度法测量TiO_2悬浮体系中亚甲基蓝浓度的表征

纳米颗粒态TiO2在实际运用中往往会形成TiO2悬浮颗粒和溶解态物质共存的混合液。对于混合液中溶解物系,以亚甲基蓝为被测物,首次系统考察了单波长、两波长、三波长三种分光光度法在亚甲基蓝浓度为2.00 mg/l和TiO2浑浊度分别为0.11、0.14、0.17、0.21、0.27、0.31、0.34、0.37、0.41、0.51、0.53,TiO2浑浊度为0.34和亚甲基蓝浓度分别为1.00、1.25、1.50、1.75、2.00、2.25、2.50 mg/l两种情况下的测定结果的相对误差和标准差。结果表明,分光光度法测定结果的相对误差和标准差都会有不同程度的波动,这与TiO2对光的改变效应和亚甲基蓝聚合体效应是有关的,而单波长分光光度法的准确度和重现性较好,特别是在浑浊度不变的情况下。其中,导致吸光度产生急剧偏差的"综合效应"被首次提出。     

Synthesis, characterization, and adsorption performance of Pb（Ⅱ）-imprinted polymer in nano-TiO2 matrix

Surface ion-imprinted in combination with sol-gel process was applied to synthesis a new Pb(II)-imprinted polymer for selective separation and enrichment of trace Pb(II) from aqueous solution. The prepared material was characterized by using the infrared spectra, X-ray di ractometer, and scanning electron microscopy. The batch experiments were conducted to study the optimal adsorption condition of adsorption trace Pb(II) from aqueous solutions on Pb(II)-imprinted polymer. The equilibrium was achieved in approximately 4.0 h, and the experimental kinetic data were fitted the pseudo second-order model better. The maximum adsorption capacity was 22.7 mg/g, and the Langmuir equation fitted the adsorption isotherm data. The results of selectivity experiment showed that selectively adsorbed rate of Pb(II) on Pb(II)-imprinted polymer was higher than all other studied ions. Desorption conditions of the adsorbed Pb(II) from the Pb(II)-imprinted polymer were also studied in batch experiments. The prepared Pb(II)-imprinted polymer was shown to be promising for the separation and enrichment of trace Pb(II) from water samples. The adsorption and desorption mechanisms were proposed.