Testing the efficiency of extraction of incurred residues from soil with optimized multi-residue method

The reproducibility of extraction of residues from spiked soil samples and from soils containing incurred residues was tested with ¹⁴C-labeled test compounds of different physical-chemical properties. Nearly 100% of the compounds added to the sample before extraction could be recovered with an average reproducibility relative standard deviation (CV) of 5.4%. The additional steps of the determination process (cleanup, evaporation, etc.) contributed to the major part of the variability of the results (CV = 10–20%). The incurred residues were most efficiently extracted with acetone for 30 min followed by the mixture of acetone/ethyl acetate 1:1 for additional 30 min. However, they could only be recovered at various extent (64–90% of total residues), underlying the importance of testing the efficiency of extraction. The residues were identified and quantified by gas chromatography applying thermionic detector. The performance parameters of the method complied with the international method validation guidelines, and they proved to be robust and suitable for determination of pesticide residues in soils of widely different physical–chemical properties.     

Nature of the field-to-field distribution of pesticide residues

The supervised trial datasets (1950), consisting of a minimum of five residue values and selected by the experts of FAO/WHO Joint Meeting on Pesticide Residues for recommending maximum residue levels between 1997 and 2011, were evaluated to obtain information on the typical spread of residue values in individual datasets. The typical relative standard deviation, CV, of field-to-field variation of pesticide residues was about 80%. The spread of residues in datasets is independent from the chemical structure of pesticides, residue level, pre-harvest interval and number of values in the datasets. The CV ranges within the Codex commodity groups and between groups overlapped and their difference were not statistically significant. The number of residues below the limit of quantification (LOQ) affects the CV at various extents depending on the ratio of LOQ/R _mean. The combined uncertainty of the highest residue in a dataset significantly affects the CV of the dataset. The lowest and intermediate ones have less influence. The residues in different fields receiving the same treatment vary within large range: 55%, 72%, 78%, 86% and 89% of the 25,766 residues values were, respectively, within 3, 4, 5, 6 and 7 times the median value of the corresponding dataset.     

Characterization of distribution of pesticide residues in crop units

The characteristic features of distribution of pesticide residues in crop units and single sample increments were studied based on more than 19,000 residue concentrations measured in root vegetables, leafy vegetables, small-, medium- and large-size fruits representing 20 different crops and 46 pesticides. Log-normal, gamma and Weibull distributions were found to provide the best fit for the relative frequency distributions of individual residue data sets. The overall best fit was provided by lognormal distribution. The relative standard deviation of residues (CV) in various crops ranged from 15–170%. The 100–120 residue values being in one data set was too small to identify potential effects of various factors such as the chemical and physical properties of pesticides and the nature of crops. Therefore, the average of CV values, obtained from individual data sets, were calculated and considered to be the best estimate for the likely variability of unit crop residues for treated field (CV = 0.8) and market samples (CV = 1.1), respectively. The larger variation of residues in market samples was attributed to the potential mixing of lots and varying proportion of non-detects. The expectable average variability of residues in composited samples can be calculated from the typical values taking into account the sample size.     

Cyhalofop‐p‐butyl mobility and distribution of residues in soil at various depths

This study was conducted to evaluate cyhalofop‐p‐butyl mobility in a sandy loam soil and subsequent distribution of residues at various depths under field conditions. Soil samples were taken from 0 to 150 cm depths at 3–90 d after rains in lysemeter of 1 and 2 m depths. Cyhalofop‐p‐butyl application at two rates and subsequent precipitation had a significant impact on soil, physico‐chemical properties and herbicide mobility. Precipitation caused substantial mobility of cyhalofop‐p‐butyl in the soil and 1.1–7.6 μg L^?1 of cyhalofop‐p‐butyl was found in leachates. Cyhalofop‐p‐butyl residues in the leachates were probably due to preferential flow through the soil. Cyhalofop‐p‐butyl residues were detected in significant amounts from the soil up to 10 d, later, residues were found below the detection limit but its three transformation products viz., cyhalofop acid, diacid, and phenol were detected.     

Biodegradation of Trifluralin in Harran Soil

Abstract

Degradation of trifluralin (α,α,α-trifluoro-2,6-dinitro-N,N-dipropyl-p-toluidine) was investigated in soils taken from three different locations at Harran region of Turkey under laboratory conditions. Surface (0–10 cm) soils, which were taken from a pesticide untreated field Gürgelen, Harran-1 and Ikizce regions in the Harran Plain, were incubated in biometer flasks for 350 days at 25°C. Ring-UL-¹⁴C-trifluralin was applied at the rate of 2 µg g^?1 with 78.7 kBq radioactivity per 100 g soil flask. Evolved ¹⁴CO₂ was monitored in KOH traps throughout the experiment. Periodically, soil sub-samples were removed and extracted by supercritical fluid extraction (SFE). Unextractable soil-bound ¹⁴C residues were determined by combustion. During the 350 days incubation period 6.6, 5.4, and 3.3% of the applied radiocarbon was evolved as ¹⁴CO₂ from the Harran-1, Gürgelen, and Ikizce soil, respectively. At the end of 350 days the SFE-extractable and bound ¹⁴C-trifluralin residues were 39.0 and 29.2% of the initially applied herbicide in Gürgelen soil. The corresponding values for Harran-1 and Ikizce soils were 36.2, 28.4% and 41.6, 18.5% respectively.     

Development,validation, and application of a method for the GC-MS analysis of fipronil and three of its degradation products in samples of water,soil, and sediment

A method for the identification and quantification of pesticide residues in water, soil, and sediment samples has been developed, validated, and applied for the analysis of real samples. The specificity was determined by the retention time and the confirmation and quantification of analyte ions. Linearity was demonstrated over the concentration range of 20 to 120 µg L^?1, and the correlation coefficients varied between 0.979 and 0.996, depending on the analytes. The recovery rates for all analytes in the studied matrix were between 86% and 112%. The intermediate precision and repeatability were determined at three concentration levels (40, 80, and 120 µg L^?1), with the relative standard deviation for the intermediate precision between 1% and 5.3% and the repeatability varying between 2% and 13.4% for individual analytes. The limits of detection and quantification for fipronil, fipronil sulfide, fipronil-sulfone, and fipronil-desulfinyl were 6.2, 3.0, 6.6, and 4.0 ng L^?1 and 20.4, 9.0, 21.6, and 13.0 ng L^?1, respectively. The method developed was used in water, soil, and sediment samples containing 2.1 mg L^?1 and 1.2% and 5.3% of carbon, respectively. The recovery of pesticides in the environmental matrices varied from 88.26 to 109.63% for the lowest fortification level (40 and 100 µg kg^?1), from 91.17 to 110.18% for the intermediate level (80 and 200 µg kg^?1), and from 89.09 to 109.82% for the highest fortification level (120 and 300 µg kg^?1). The relative standard deviation for the recovery of pesticides was under 15%.     

Organo-chlorine pesticide (DDT and HCH) residues in the Taihu Lake Region and its movement in soil-water system I. Field survey of DDT and HCH residues in ecosystem of the region

The use of organo-chlorine (DDT and HCH) has been banned in China for 20 years. A field survey was carried out during 1999-2000 in the Taihu Lake Region. Organo-chlorine pesticide (OCP) residues in soil, water, fish and sediment samples were investigated. DDT was detected in 5 out of 10 samples with concentration ranging from 0.3 to 5.3 microg/kg in the surface (0-15 cm) layer, 6 out of 10 with 0.5 to 4.0 microg/kg in the subsoil layer (16-30 cm), and 4 of 10 with 0 to 2.7 microg/ kg in the deep soil layer (31-50 cm). Results for HCH residues in soil samples were similar to those of DDT. These results indicate that OCP residues in 0-50 cm profile had been leached out or degraded to safe level. In river water DDT was detected in 10 out of 13 samples ranging from 0.2 to 9.3 microg/l, with an average of 1.0 microg/l. While HCH was detected in 12 out of 13 samples ranging from 0.02 to 36.1 microg/l, with an average 5.6 microg/l. DDT residues in sediment ranged from 0.1 to 8.8 microg/kg, while HCH ranged from 0.3 to 66.5 microg/kg. DDT residues in fish body ranged from 3.7 to 23.5 microg/kg and HCH ranged from 3.7 to 132 microg/kg. These results demonstrate an accumulation through food chain (from soil-water-sediment-microbes-crop-fish-... etc.), also that HCH residues are generally more persistent than DDT residues. However, all these data are well below than the state warning standard limit.     

Dissipation of chlorpyrifos in two soil environments of semi-arid India

The dissipation of chlorpyrifos (20 EC) at environment-friendly doses in the sandy loam and loamy sand soils of two semi-arid fields and the presence of pesticide residues in the harvested groundnut seeds, were monitored. The movement of chlorpyrifos through soil and its binding in the loamy sand soil was studied using 14C chlorpyrifos. Chlorpyrifos was moderately stable in both loamy sand and sandy loam soils, with half-life of 12.3 and 16.4 days, respectively. With 20 EC treatments the dissipation was slower for standing crop than seed treatment, indicative of the high degradation rates in the bioactive rhizosphere. In soil, 3,5,6-trichloro-2-pyridinol (TCP) was the principal breakdown product. Presence of 3,5,6-trichloro-2-methoxypyridine (TMP), the secondary metabolite, detected in the rhizospheric samples during this study, has not been reported earlier in field soils. The rapid dissipation of the insecticide from the soil post-application might have resulted from low sorption due to the alkalinity of the soil and its low organic matter content, fast topsoil dissipation possibly by volatilization and photochemical degradation, aided by the low water solubility, limited vertical mobility due to confinement of residues to the upper 15 cm soil layers and microbial mineralization and nucleophilic hydrolysis. Contrary to the reports of relatively greater mobility of its metabolites in temperate soils, TMP and TCP remained confined to the top 15 cm soil. The formation of bound residues (half-life 13.4 days) in the loamy sand soil was little and not "irreversible." A decline in bound residues could be correlated to decreasing TCP concentration. Higher pod yields were obtained from pesticide treated soils in comparison to controls. Post-harvest no pesticide residues were detected in the soils and groundnut seeds.     

Study of the spatial variation of the biodegradation rate of the herbicide bentazone with soil depth using contrasting incubation methods

Vertical and horizontal spatial variability in the biodegradation of the herbicide bentazone was compared in sandy-loam soil from an agricultural field using sieved soil and intact soil cores. An initial experiment compared degradation at five depths between 0 and 80 cm using sieved soil. Degradation was shown to follow the first-order kinetics, and time to 50% degradation (DT(50)), declined progressively with soil depth from 56 d at 0-10 cm to 520 d at 70-80 cm. DT(50) was significantly correlated with organic matter, pH and dehydrogenase activity. In a subsequent experiment, degradation rate was compared after 127 d in sieved soil and intact cores from 0 to 10 and 50 to 60 cm depth from 10 locations across a 160x90 m portion of the field. Method of incubation significantly affected mean dissipation rate, although there were relatively small differences in the amount of pesticide remaining in intact cores and sieved soil, accounting for between 4.6% and 10.6% of that added. Spatial variability in degradation rate was higher in soil from 0 to 10 cm depth relative to that from 50 and 60 cm depth in both sieved soil and intact core assessments. Patterns of spatial variability measured using cores and sieved soil were similar at 50-60 cm, but not at 0-10 cm depth. This could reflect loss of environmental context following processing of sieved soil. In particular, moisture content, which was controlled in sieved soil, was found to be variable in cores, and was significantly correlated with degradation rate in intact topsoil cores from 0 to 10 cm depth.     

Dissipation of 14C carbaryl and quinalphos in soil under a groundnut crop (Arachis hypogaea L.) in semi-arid India

The dissipation of 14C carbaryl in undisturbed soil cores, and of quinalphos (25EC and 20AF) after seed and soil treatments, was investigated under field use conditions, in a semi-arid groundnut field. Residues were analyzed by TLC and HPLC and additionally by LSC for 14C carbaryl. The harvested seed kernels were also tested for the presence of insecticide residues. The movement of carbaryl was limited to 15 cm depth in the loamy sand of Jaipur and was detected till 120 days (DT50 of 14.93 days) after application. Bound residues and 1-naphthol had a DT50 of 11.45 and 13.68 days, respectively. Irrespective of the three types of soil samples investigated, the principal metabolite formed on seed and soil treatments with quinalphos, was 2-hydroxyquinoxaline. With seed treatment, a thiol metabolite of quinalphos was also detected. Higher yields of groundnut were realized with quinalphos treatments in comparison to those from control. Post-harvest, no pesticide residues were found in seeds.     

Influence of the application of sewage sludge on the degradation of pesticides in the soil

A study was made of the influence of the application of sewage sludge on the degradation of pesticides in the soil. Two kinds of sludge were used, with different characteristics, one from an urban treatment plant and one from a food processing plant. Three organophosphorus insecticides, fenitrothion, diazinon and dimethoate, were studied. The relative importance was determined of the chemical and biological degradation processes, which involved experiments on soil and sterile soil samples. A comparative study was also made of the degradation of pesticide residues and the evolution of the microbial population. The application of sludge seems to have a complex effect on the degradation of pesticides, determined by the bioavailability and biodegradability of their active ingredient. The biodegradation of pesticide residues brings about alterations in the microorganism population of the soil.     

Validation of a QuEChERS-based gas chromatographic method for analysis of pesticide residues in Cassia angustifolia (senna)

A simple multi-residue method based on modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach was established for the determination of 17 organochlorine (OC), 15 organophosphorous (OP) and 7 synthetic pyrethroid (SP) pesticides in an economically important medicinal plant of India, Senna (Cassia angustifolia), by gas chromatography coupled to electron capture and flame thermionic detectors (GC/ECD/FTD) and confirmation of residues was done on gas chromatograph coupled with mass spectrometry (GC-MS). The developed method was validated by testing the following parameters: linearity, limit of detection (LOD), limit of quantification (LOQ), matrix effect, accuracy–precision and measurement uncertainty; the validation study clearly demonstrated the suitability of the method for its intended application. All pesticides showed good linearity in the range 0.01–1.0 μg mL^?1 for OCs and OPs and 0.05–2.5 μg mL^?1 for SPs with correlation coefficients higher than 0.98. The method gave good recoveries for most of the pesticides (70–120%) with intra-day and inter-day precision < 20% in most of the cases. The limits of detection varied from 0.003 to 0.03 mg kg^?1, and the LOQs were determined as 0.01-0.049 mg kg^?1. The expanded uncertainties were <30%, which was distinctively less than a maximum default value of ±50%. The proposed method was successfully applied to determine pesticide residues in 12 commercial market samples obtained from different locations in India.     

Fenvalerate concentrations in a mineral and an organic soil receiving multiple applications during the growing season

Abstract

Fenvalerate EC at 140 g AI/ha was applied 7 times at 2 wk intervals to duplicate plots of Plainfield sand and an organic soil contained in 2.2 x 0.9 m field microplots with and without an onion crop present in 1980 and 1981 respectively. Soil samples were taken immediately before and after each application and at 2, 4, and 6 wk after the last application in 1980. Additional samples were taken at 22 and 34 wk for the 1981 treatment. Concentrations of fenvalerate were determined by glc. In the crop‐free mineral soil, fenvalerate levels declined from. 0.07–0.11 ppm immediately after spraying to 0.01–0.03 ppm after 2 wk; in the organic soil the rate of addition of fenvalerate exceeded the rate of disappearance and the concentration in the soil gradually increased over the 14 wk treatment period to the 0.9–1.0 ppm range. This concentration decreased slowly over the next 10 wk to 0.7–0.8 ppm and was still 0.5–0.7 ppm the following spring. Results were similar for cropped soils. Concentrations in the top third of the 15 cm cores were 6x and 15x those in the middle third for sand and organic soil, respectively. Concentrations, in the onions at harvest were <0.01 ppm.     

Environmental fate of pesticides used in Australian viticulture: Behaviour of dithianon and vinclozolin in the soils of the South Australian Riverland

The red calcareous earth soils of the South Australian Riverland produce more than one-third of the grapes used in Australian winemaking. As part of on-going investigations into pesticide transport in Australian vineyard soils, the movement of the fungicides dithianon and vinclozolin through such strongly alkaline soils was investigated. Small, undisturbed soil cores were extracted from the inter-row topsoil of a vineyard adjacent to the River Murray, approximately 10 km S.W. of Overland Corner, South Australia. The vines were grown in a deep (1 – 4 m) reddish brown, strongly alkaline, sandy loam with a low organic carbon content (1 – 2 %). Surface fluxes of pesticide were applied at the maximum recommended application rates to the surface of the cores, which were then irrigated, and pesticide residues in the leachate determined by HPLC. No leaching of either dithianon or vinclozolin occurred. Dithianon was immobilised in the top 2 cm of the soil. Dithianon concentrations were low ( 0 – 37 % applied dose) suggesting that rapid degradation of this compound occurs in these soils (63 – 100 % degradation in 10 days). Extremely low concentrations of vinclozolin were found throughout the soil core profiles (0.05 – 1.4 % applied dose) suggesting that this fungicide was somewhat mobile, but also that it too was unstable in such alkaline soils (> 98 % degradation in 10 days). These results suggest that the irrigated vineyard soils of this region are unlikely to be prone to leaching of dithianon or vinclozolin, and therefore that groundwater supplies in this area are unlikely to be at any significant risk of contamination through viticultural use of these compounds.     

The mobility of thiobencarb and fipronil in two flooded rice-growing soils

The mobility of the rice pesticides thiobencarb (S-[(4-chlorophenyl) methyl] diethylcarbamothioate) and fipronil ([5-amino-3-cyano-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-4-[(trifluoromethyl)sulfinyl]pyrazole) were investigated in the glasshouse under flooded conditions using two Australian rice-growing soils. When using leakage rates of 10 mm day^?1, less than 20% of applied thiobencarb and fipronil remained in the water column after 10 days due to rapid transfer to the soil phase. Up to 70% and 65% of the applied thiobencarb and fipronil, respectively, were recovered from the 0–1 cm layer of soils. Only 5–7% of each pesticide was recovered from the 1–2 cm layer, and less than 2% was recovered from each 1 cm layer in the 2–10 cm region of the soils. Analysis of the water leaking from the base of the soil cores showed between 5–10% of the applied thiobencarb and between 10–20% of the applied fipronil leaching from the soil cores. The high levels of pesticide in the effluent was attributed to preferential flow of pesticide-laden water via soil macropores resulting from the wetting and drying process, worm holes and root channels.     

Variability of pesticide residues in cauliflower units collected from a field trial and market places in Greece

To estimate the variability of pesticide residue levels present in cauliflower units, a total of 142 samples were collected from a field trial of a cooperative farmer, and 120 samples were collected from different market places in Thessaloniki, Greece. The collected samples were extracted using the quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction technique, and the residues were determined by liquid chromatography–tandem mass spectrometry. The developed method was validated by evaluating the accuracy, precision, linearity, limit of detection (LOD), and limit of quantification (LOQ). The average recoveries for all the analytes, derived from the data of control samples fortified at 0.01, 0.05, 0.1, and 0.2 mg/kg, ranged from 74 to 110% with a relative standard deviation of ≤8%. The correlation coefficient (R²) was ≥0.997 for all the analytes using matrix-matched calibration standards. The LOD values ranged from 0.001 to 0.003 mg/kg, and the LOQ was determined at 0.01 mg/kg for all the sought analytes. The matrix effect was found to be at a considerable level, especially for cypermethrin and deltamethrin, amounting to +90% and +145%, respectively. For the field samples, the unit-to-unit variability factors (VFs) calculated for cypermethrin and deltamethrin were 2.38 and 2.32, respectively, while the average VF for the market basket samples was 5.11. In the market basket samples, residues of cypermethrin, deltamethrin, chlorpyrifos, and indoxacarb were found at levels ≥LOQ and their respective VFs were 7.12, 5.67, 5.28, and 2.40.     

The mobility of thiobencarb and fipronil in two flooded rice-growing soils

The mobility of the rice pesticides thiobencarb (S-[(4-chlorophenyl) methyl] diethylcarbamothioate) and fipronil ([5-amino-3-cyano-1-[2,6-dichloro-4-(trifluoromethyl)phenyl]-4-[(trifluoromethyl)sulfinyl]pyrazole) were investigated in the glasshouse under flooded conditions using two Australian rice-growing soils. When using leakage rates of 10 mm day(-1), less than 20% of applied thiobencarb and fipronil remained in the water column after 10 days due to rapid transfer to the soil phase. Up to 70% and 65% of the applied thiobencarb and fipronil, respectively, were recovered from the 0-1 cm layer of soils. Only 5-7% of each pesticide was recovered from the 1-2 cm layer, and less than 2% was recovered from each 1 cm layer in the 2-10 cm region of the soils. Analysis of the water leaking from the base of the soil cores showed between 5-10% of the applied thiobencarb and between 10-20% of the applied fipronil leaching from the soil cores. The high levels of pesticide in the effluent was attributed to preferential flow of pesticide-laden water via soil macropores resulting from the wetting and drying process, worm holes and root channels.     

Obsolete pesticides and application of colonizing plant species for remediation of contaminated soil in Kazakhstan

In Kazakhstan, there is a problem of finding ways to clean local sites contaminated with pesticides. In particular, such sites are the deserted and destroyed storehouses where these pesticides were stored; existing storehouses do not fulfill sanitary standards. Phytoremediation is one potential method for reducing risk from these pesticides. Genetic heterogeneity of populations of wild and weedy species growing on pesticide-contaminated soil provides a source of plant species tolerant to these conditions. These plant species may be useful for phytoremediation applications. In 2008–2009 and 2011, we surveyed substances stored in 80 former pesticide storehouses in Kazakhstan (Almaty oblast) to demonstrate an inventory process needed to understand the obsolete pesticide problem throughout the country, and observed a total of 354.7 t of obsolete pesticides. At the sites, we have found organochlorine pesticides residues in soil including metabolites of dichlorodiphenyltrichloroethane and isomers of hexachlorocyclohexane. Twenty-four of the storehouse sites showed pesticides concentrations in soil higher than maximum allowable concentration which is equal to 100 μg kg^?1 in Kazakhstan. Seventeen pesticide-tolerant wild plant species were selected from colonizing plants that grew into/near the former storehouse’s pesticides. The results have shown that colonizing plant annual and biannual species growing on soils polluted by pesticides possess ability to accumulate organochlorine pesticide residues and reduce pesticide concentrations in soil. Organochlorine pesticides taken up by the plants are distributed unevenly in different plant tissues. The main organ of organochlorine pesticide accumulation is the root system. The accumulation rate of organochlorine pesticides was found to be a specific characteristic of plant species and dependent on the degree of soil contamination. This information can be used for technology development of phytoremediation of pesticide-contaminated soils.     

Plant uptake of pesticides and human health: dynamic modeling of residues in wheat and ingestion intake

Human intake of pesticide residues from consumption of processed food plays an important role for evaluating current agricultural practice. We take advantage of latest developments in crop-specific plant uptake modeling and propose an innovative dynamic model to estimate pesticide residues in the wheat-environment system, dynamiCROP. We used this model to analyze uptake and translocation of pesticides in wheat after foliar spray application and subsequent intake fractions by humans. Based on the evolution of residues in edible parts of harvested wheat we predict that between 22 mg and 2.1 g per kg applied pesticide are taken in by humans via consumption of processed wheat products. Model results were compared with experimentally derived concentrations in wheat ears and with estimated intake via inhalation and ingestion caused by indirect emissions, i.e. the amount lost to the environment during pesticide application. Modeled and measured concentrations in wheat fitted very well and deviate from less than a factor 1.5 for chlorothalonil to a maximum factor 3 for tebuconazole. Main aspects influencing pesticide fate behavior are degradation half-life in plant and time between pesticide application and crop harvest, leading to variations in harvest fraction of at least three orders of magnitude. Food processing may further reduce residues by approximately 63%. Intake fractions from residues in sprayed wheat were up to four orders of magnitude higher than intake fractions estimated from indirect emissions, thereby demonstrating the importance of exposure from consumption of food crops after direct pesticide treatment.     

Monitoring of pesticide residues in a cotton crop soil

This paper reports on the residues of methyl parathion (O,O-dimethyl O-4-nitrophenyl phosphorothioate), trifluralin (alpha, alpha, alpha-trifluoro-2,6-dinitro-N,N-dipropyl-p-toluidine), endosulfan [(1, 4, 5, 6, 7, 7-hexachloro-8, 9, 10-trinorborn-5-en-2, 3-ylenebismethylene) sulfite] and dimethoate (O, O-dimethyl S-methylcarbamoylmethyl phosphorodithioate) in a cotton crop soil. Soil samples (0-15 cm) were collected at different periods from the cotton crop farm and subjected to Soxhlet extraction. The extracted material was analysed after clean-up by a HP5890 II gas chromatograph equipped with a 63Ni electron-capture detector (ECD-63Ni) and fitted with a 25 m x 0.2 mm i.d. fused silica capillary column [Ultra-2 (5% phenylmethyl polysiloxane)]. The recoveries of the pesticide residues from the spiked control soil were determined after Soxhlet extraction and C18 cartridges clean-up by using radiotracer techniques with the corresponding 14C-pesticides. The results show that in the cotton crop soil the pesticide residues under study were present in the range of 0.1 to 0.4 mg.kg-1. Endosulfan was found to be rapidly degraded in the soil and formed a sulfate metabolite.