An energetic life cycle assessment of C&D waste and container glass recycling in Cape Town,South Africa

This study presents the results of a comparative life cycle assessment (LCA) on the energy requirements and greenhouse gas (GHG) emission implications of recycling construction and demolition (C&D) rubble and container glass in Cape Town, South Africa. Cape Town is a medium sized city in a developing country with a growing population and a rising middle class, two factors that are resulting in increased generation of solid waste. The City is constrained in terms of landfill space and competing demands for municipal resources.The LCA assessment was based on locally gathered data, supplemented with ecoinvent life cycle inventory data modified to the local context. The results indicated that recycling container glass instead of landfilling can achieve an energy savings of 27% and a GHG emissions savings of 37%, with a net savings still being achieved even if collection practices are varied. The C&D waste results, however, showed net savings only for certain recycling strategies. Recycling C&D waste can avoid up to 90% of the energy and GHG emissions of landfilling when processed and reused onsite but, due to great dependence on haulage distances, a net reduction of energy use and GHG emissions could not be confidently discerned for offsite recycling. It was also found that recycling glass achieves significantly greater savings of energy and emissions than recycling an equivalent mass of C&D waste.The study demonstrated that LCA provides an important tool to inform decisions on supporting recycling activities where resources are limited. It also confirmed other researchers’ observations that strict adherence to the waste management hierarchy will not always result in the best environmental outcome, and that more nuanced analysis is required. The study found that the desirability of recycling from an energy and climate perspective cannot be predicted on the basis of whether such recycling conserves a non-renewable material. However, recycling that replaces a virgin product from an energy-intensive production process appears to be more robustly beneficial than recycling that replaces a product with little embodied energy. Particular caution is needed when applying the waste management hierarchy to the latter situations.     

Paper and biomass for energy?: The impact of paper recycling on energy and CO2 emissions

The pulp and paper industry is placed in a unique position as biomass used as feedstock is now in increasingly high demand from the energy sector. Increased demand for biomass increases pressure on the availability of this resource, which might strengthen the need for recycling of paper. In this study, we calculate the energy use and carbon dioxide emissions for paper production from three pulp types. Increased recycling enables an increase in biomass availability and reduces life-cycle energy use and carbon dioxide emissions. Recovered paper as feedstock leads to lowest energy use (22 GJ/t) and CO₂ emissions (−1100 kg CO₂/t) when biomass not used for paper production is assumed to be converted into bio-energy. Large differences exist between paper grades in e.g. electricity and heat use during production, fibre furnish, filler content and recyclability. We found large variation in energy use over the life-cycle of different grades. However, in all paper grades, life-cycle energy use decreases with increased recycling rates and increased use of recovered fibres. The average life-cycle energy use of the paper mix produced in The Netherlands, where the recycling rate is approximately 75%, is about 14 GJ/t. This equals CO₂ savings of about 1 t CO₂/t paper if no recycled fibres would be used.     

Environmental benefits from the use of the residual biomass in nurseries

Every year, nurseries waste about 40 t of residual biomass for each ha of potted plants cultivation. The European nursery sector deals with about 90,000 ha of cultivated land and 120,000 ha of nurseries, with a turnover of 19.8 billion Euros in 2011. In recent years, a number of Italian projects highlighted that GHG (greenhouse gas) emissions for the nursery sector range between 37 tCO₂eq/ha/year and 45 tCO₂eq/ha/year for potted plants, mainly due to the consumption of electric energy, plastics and peat. Moreover, other studies analyse the impacts associated to nurseries, recommending best practices for energy reductions and waste recycle or reuse. Therefore, the present work focused its attention to the possible environmental benefits associated to the reuse of residues (wood and substrate) of potted plants that are discarded from the nursery production chain. GHG emissions and fossil energy requirement were quantified by considering the CO₂eq (CO₂ equivalent) and the CER (cumulative energy requirement) respectively, in order to assess the environmental impacts of two different scenarios proposed for the materials recovery. Final results highlighted that the solutions which are able to recover the substrate and the wood allow impact reductions compared to landfill disposal. In particular, the scenario consisting in the immediate separation of the substrate from the root-plant system and the successive chipping of wood for energetic reuse, allows higher savings than those obtainable through shredding and subsequent wind separation. Moreover, for what concerns the CO₂eq, an adequate use of the residual biomass make it possible to compensate the GHG emissions of the nurseries up to 15%.     

Avoided deforestation as a greenhouse gas mitigation tool: economic issues

Tropical deforestation is a significant contributor to accumulation of greenhouse gases (GHGs) in the atmosphere. GHG emissions from deforestation in the tropics were in the range of 1 to 2 Pg C yr(-1) for the 1990s, which is equivalent to as much as 25% of global anthropogenic GHG emissions. While there is growing interest in providing incentives to avoid deforestation and consequently reduce net carbon emissions, there is limited information available on the potential costs of these activities. This paper uses a global forestry and land use model to analyze the potential marginal costs of reducing net carbon emissions by avoiding deforestation in tropical countries. Our estimates suggest that about 0.1 Pg C yr(-1) of emissions reductions could be obtained over the next 30 to 50 yr for $5 per Mg C, and about 1.6 Pg C yr(-1) could be obtained over the same time frame for $100 per Mg C. In addition, the effects of carbon incentives on land use could be substantial. Relative to projected baseline conditions, we find that there would be around 3 million additional hectares (ha) of forestland in 2055 at $5 per Mg C and 422 million ha at $100 per Mg C. Estimates of reductions in area deforested, GHG mitigation potential, and annual land rental payments required are presented, all of which vary by region, carbon price paid, and time frame of mitigation.     

Bioethanol from waste: Life cycle estimation of the greenhouse gas saving potential

This paper considers two alternative feedstocks for bioethanol production, both derived from household waste—Refuse Derived Fuel (RDF) and Biodegradable Municipal Waste (BMW). Life Cycle Assessment (LCA) has been carried out to estimate the GHG emissions from bioethanol using these two feedstocks. An integrated waste management system has been considered, taking into account recycling of materials and production of bioethanol in a combined gasification/bio-catalytic process. For the functional unit defined as the ‘total amount of waste treated in the integrated waste management system’, the best option is to produce bioethanol from RDF—this saves up to 196 kg CO₂ equiv. per tonne of MSW, compared to the current waste management practice in the UK.However, if the functional unit is defined as ‘MJ of fuel equiv.’ and bioethanol is compared with petrol on an equivalent energy basis, the results show that bioethanol from RDF offers no saving of GHG emissions compared to petrol. For example, for a typical biogenic carbon content in RDF of around 60%, the life cycle GHG emissions from bioethanol are 87 g CO₂ equiv./MJ while for petrol they are 85 g CO₂ equiv./MJ. On the other hand, bioethanol from BMW offers a significant GHG saving potential over petrol. For a biogenic carbon content of 95%, the life cycle GHG emissions from bioethanol are 6.1 g CO₂ equiv./MJ which represents a saving of 92.5% compared to petrol. In comparison, bioethanol from UK wheat saves 28% of GHG while that from Brazilian sugar cane – the best performing bioethanol with respect to GHG emissions – saves 70%. If the biogenic carbon of the BMW feedstock exceeds 97%, the bioethanol system becomes a carbon sequester. For instance, if waste paper with the biogenic carbon content of almost 100% and a calorific value of 18 MJ/kg is converted into bioethanol, a saving of 107% compared to petrol could be achieved. Compared to paper recycling, converting waste paper into bioethanol saves 460 kg CO₂ equiv./t waste paper or eight times more than recycling.     

Greenhouse gas emissions and energy balance of sunflower biodiesel: Identification of its key factors in the supply chain

The production of first generation biofuels, such as sunflower-based biodiesel, is potentially an option for diversifying the energy matrix in several South American countries. However, biofuels present environmental challenges, especially concerning the reduction of greenhouse gas (GHG) emissions. This study, using a life-cycle approach, evaluates the GHG emissions and energy balance of the future nationwide production of sunflower-based biodiesel in Chile. Direct land use change is included in the analysis. The overall findings indicate that sunflower biodiesel, under the most likely production conditions, will have better environmental performance than fossil diesel in terms of both indicators. The agricultural stage is associated to key factors such as land use change, and nitrogen fertilizers. These factors contribute significantly to GHG emissions or energy demand in the biodiesel life cycle. The sensitivity analysis shows that no GHG emission saving could occur if nitrogen fertilizers rate exceeds 330 kg N/ha. In order to reduce the environmental impacts of this biofuel, improvement measures are suggested.     

A comparison of on-site nutrient and energy recycling technologies in algal oil production

Research on biofuel production pathways from algae continues because among other potential advantages they avoid key consequential effects of terrestrial oil crops, such as competition for cropland. However, the economics, energetic balance, and climate change emissions from algal biofuels pathways do not always show great potential, due in part to high fertilizer demand. Nutrient recycling from algal biomass residue is likely to be essential for reducing the environmental impacts and cost associated with algae-derived fuels. After a review of available technologies, anaerobic digestion (AD) and hydrothermal liquefaction (HTL) were selected and compared on their nutrient recycling and energy recovery potential for lipid-extracted algal biomass using the microalgae strain Scenedesmus dimorphus. For 1 kg (dry weight) of algae cultivated in an open raceway pond, 40.7 g N and 3.8 g P can be recycled through AD, while 26.0 g N and 6.8 g P can be recycled through HTL. In terms of energy production, 2.49 MJ heat and 2.61 MJ electricity are generated from AD biogas combustion to meet production system demands, while 3.30 MJ heat and 0.95 MJ electricity from HTL products are generated and used within the production system.Assuming recycled nutrient products from AD or HTL technologies displace demand for synthetic fertilizers, and energy products displace natural gas and electricity, the life cycle greenhouse gas reduction achieved by adding AD to the simulated algal oil production system is between 622 and 808 g carbon dioxide equivalent (CO₂e)/kg biomass depending on substitution assumptions, while the life cycle GHG reduction achieved by HTL is between 513 and 535 g CO₂e/kg biomass depending on substitution assumptions. Based on the effectiveness of nutrient recycling and energy recovery, as well as technology maturity, AD appears to perform better than HTL as a nutrient and energy recycling technology in algae oil production systems.     

Life cycle energy impacts of automotive liftgate inner

This paper compares the life cycle energy use of a cast-aluminum, rear liftgate inner and a conventional, stamped steel liftgate inner used in a minivan. Using the best available aggregate life cycle inventory data and a simple spreadsheet-level analysis, energy comparisons were made at both the single-vehicle and vehicle-fleet levels. Since the product manufacture and use are distributed over long periods of time that, in a fleet, are not simple linear combinations of single product life cycles. Thus, it is all the products in use over a period of time, rather than a single product, that are more appropriate for the life cycle analysis. Using a set of consistent data, analyses also examine sensitivity to the level of analysis and the assumptions to determine the most favorable materials with respect to life cycle energy benefits.As expected, life cycle energy impacts of aluminum are lower than steel at a single-vehicle level – energy savings are determined to be 1.8 GJ/vehicle. Most energy savings occur at the vehicle operation phase due to improved fuel economy from lightweighting. The energy benefits are realized only very close to the average vehicle life of 14 years. With the incremental growth of the vehicle fleet, it takes longer – about 21 years – for aluminum to achieve life cycle equivalence with steel. The number of years aluminum needs to achieve equivalence with steel was found to be quite sensitive to aluminum manufacturing energy and fuel economy. As the steel industry races to compete with other materials for automotive lightweighting, a systems approach, instead of part-to-part comparison, is more appropriate in the determination of viability of aluminum substitution from an energy perspective.     

Biomass use in chemical and mechanical pulping with biomass-based energy supply

The pulp and paper industry is energy intensive and consumes large amounts of wood. Biomass is a limited resource and its efficient use is therefore important. In this study, the total amount of biomass used for pulp and for energy is estimated for the production of several woodfree (containing only chemical pulp) and mechanical (containing mechanical pulp) printing paper products, under Swedish conditions. Chemical pulp mills today are largely self-sufficient in energy while mechanical pulp mills depend on large amounts of external electricity. Technically, all energy used in pulp- and papermaking can be biomass based. Here, we assume that all energy used, including external electricity and motor fuels, is based on forest biomass. The whole cradle-to-gate chain is included in the analyses. The results indicate that the total amount of biomass required per tonne paper is slightly lower for woodfree than for mechanical paper. For the biomass use per paper area, the paper grammage is decisive. If the grammage can be lowered by increasing the proportion of mechanical pulp, this may lower the biomass use per paper area, despite the higher biomass use per unit mass in mechanical paper. In the production of woodfree paper, energy recovery from residues in the mill accounts for most of the biomass use, while external electricity production accounts for the largest part for mechanical paper. Motor fuel production accounts for 5–7% of the biomass use. The biomass contained in the final paper product is 21–42% of the total biomass use, indicating that waste paper recovery is important. The biomass use was found to be about 15–17% lower for modelled, modern mills compared with mills representative of today's average technology.     

Large-scale utilization of biomass energy and carbon dioxide capture and storage in the transport and electricity sectors under stringent CO2 concentration limit scenarios

Large-scale, dedicated commercial biomass energy systems are a potentially large contributor to meeting global climate policy targets by the end of the century. We use an integrated assessment model of energy and agriculture systems to show that, given a climate policy in which terrestrial carbon is appropriately valued equally with carbon emitted from the energy system, biomass energy has the potential to be a major component of achieving these low concentration targets. A key aspect of the research presented here is that the costs of processing and transporting biomass energy at much larger scales than current experience are explicitly incorporated into the modeling. From the scenario results, 120–160 EJ/year of biomass energy is produced globally by midcentury and 200–250 EJ/year by the end of this century. In the first half of the century, much of this biomass is from agricultural and forest residues, but after 2050 dedicated cellulosic biomass crops become the majority source, along with growing utilization of waste-to-energy. The ability to draw on a diverse set of biomass-based feedstocks helps to reduce the pressure for drastic large-scale changes in land use and the attendant environmental, ecological, and economic consequences those changes would unleash. In terms of the conversion of bioenergy feedstocks into value added energy, this paper demonstrates that biomass is and will continue to be used to generate electricity as well as liquid transportation fuels. A particular focus of this paper is to show how climate policies and technology assumptions – especially the availability of carbon dioxide capture and storage (CCS) technologies – affect the decisions made about where the biomass is used in the energy system. The potential for net-negative electric sector emissions through the use of CCS with biomass feedstocks provides an attractive part of the solution for meeting stringent emissions constraints; we find that at carbon prices above $150/tCO₂, over 90% of biomass in the energy system is used in combination with CCS. Despite the higher technology costs of CCS, it is a very important tool in controlling the cost of meeting a target, offsetting the venting of CO₂ from sectors of the energy system that may be more expensive to mitigate, such as oil use in transportation. CCS is also used heavily with other fuels such as coal and natural gas, and by 2095 a total of 1530 GtCO₂ has been stored in deep geologic reservoirs. The paper also discusses the role of cellulosic ethanol and Fischer–Tropsch biomass derived transportation fuels as two representative conversion processes and shows that both technologies may be important contributors to liquid fuels production, with unique costs and emissions characteristics.     

Long-term depletion of calcium and other nutrients in eastern US forests

Both harvest removal and leaching losses can deplete nutrient capital in forests, but their combined long-term effects have not been assessed previously. We estimated changes in total soil and biomass N, Ca, K, Mg, and P over 120 years from published data for a spruce-fir site in Maine, two northern hardwood sites in New Hampshire, central hardwood sites in Connecticut and Tennessee, and a loblolly pine site in Tennessee. For N, atmospheric inputs counterbalance the outputs, and there is little long-term change on most sites. For K, Mg, and P, the total pool may decrease by 2%–10% in 120 years depending on site and harvest intensity. For Ca, net leaching loss is 4–16 kg/ha/yr in mature forests, and whole-tree harvest removes 200–1100 kg/ha. Such leaching loss and harvest removal could reduce total soil and biomass Ca by 20%–60% in only 120 years. We estimated unmeasured Ca inputs from rock breakdown, root-zone deepening, and dry deposition; these should not be expected to make up the Ca deficit. Acid precipitation may be the cause of current high leaching of Ca. Although Ca deficiency does not generally occur now in acid forest soils, it seems likely if anthropogenic leaching and intensive harvest removal continue.     

Energy balances,greenhouse gas emissions and economics of biochar production from palm oil empty fruit bunches

This paper presents results from a gate-to-gate analysis of the energy balance, greenhouse gas (GHG) emissions and economic efficiency of biochar production from palm oil empty fruit bunches (EFB). The analysis is based on data obtained from EFB combustion in a slow pyrolysis plant in Selangor, Malaysia. The outputs of the slow pyrolysis plant are biochar, syngas, bio-oil and water vapor. The net energy yield of the biochar produced in the Selangor plant is 11.47 MJ kg⁻¹ EFB. The energy content of the biochar produced is higher than the energy required for producing the biochar, i.e. the energy balance of biochar production is positive. The combustion of EFB using diesel fuel has the largest energy demand of 2.31 MJ kg⁻¹ EFB in the pyrolysis process. Comparatively smaller amounts of energy are required as electricity (0.39 MJ kg⁻¹ EFB) and for transportation of biochar to the warehouse and the field (0.13 MJ kg⁻¹ EFB). The net greenhouse gas emissions of the studied biochar production account for 0.046 kg CO₂-equiv. kg⁻¹ EFB yr⁻¹ without considering fertilizer substitution effects and carbon accumulation from biochar in the soil. The studied biochar production is profitable where biochar can be sold for at least 533 US-$ t⁻¹. Potential measures for improvement are discussed, including higher productivity of biochar production, reduced energy consumption and efficient use of the byproducts from the slow pyrolysis.     

High biomass removal limits carbon sequestration potential of mature temperate pastures

Decades of plowing have depleted organic C stocks in many agricultural soils. Conversion of plowed fields to pasture has the potential to reverse this process, recapturing organic matter that was lost under more intensive cropping systems. Temperate pastures in the northeast USA are highly productive and could act as significant C sinks. However, such pastures have relatively high biomass removal as hay or through consumption by grazing animals. In addition, the ability to sequester C decreases over time as previously depleted stocks are replenished and the soil returns to equilibrium conditions. The objective of this research was to use eddy covariance systems to quantify CO(2) fluxes over two fields in central Pennsylvania that had been managed as pastures for at least 35 yr. Net ecosystem exchange measurements averaged over 8 site-years suggested that the pastures were acting as small net C sinks of 19 g C m(-2) yr(-1) (positive values indicate uptake). However, when biomass removal and manure deposition were included to calculate net biome productivity, the pastures were a net source of -81 g C m(-2) yr(-1) (negative values indicate loss to the atmosphere). Manure generated from the hay that was consumed off site averaged 18 g C m(-2) yr(-1). Returning that manure to the pastures would have only partially replenished the lost C, and the pastures would have remained net C sources. Heavy use of the biomass produced on these mature pastures prevented them from acting as C sinks.     

Assessing energy use and greenhouse gas emission savings from compact housing: a small-town case study

Data from the US Department of Energy show that single-family detached homes consume about 17% more energy per year than attached homes and roughly double that of units in large multi-family structures. While greater use of these compact housing types could reduce a community's energy use and greenhouse gas (GHG) emissions, most local climate action plans (CAPs) do not quantify those potential savings. This article describes how the climate action planning process in the Town of Blacksburg, Virginia has addressed residential sector GHG emissions and demonstrates a methodology applied in that community for estimating potential GHG reductions from compact housing. It finds that in an aggressive compact housing scenario GHG emissions from new housing could be decreased by as much as 36%, without factoring in additional energy conservation or efficiency measures. The article concludes with a discussion of the opportunities and challenges related to implementing compact housing in future residential development.     

Techno-economic analysis of natural gas combined cycles with post-combustion CO2 absorption, including a detailed evaluation of the development potential

We performed a detailed analysis of the potential future costs and performance of post-combustion CO₂ absorption in combination with a natural gas combined cycle (NGCC). After researching state-of-the-art technology, an Excel model was created to analyze possible developments in the performance of energy conversion, CO₂ capture, and CO₂ compression. The input variables for the three time frames we used were based on literature data, product information, expert opinions, and our own analysis. Using a natural gas price of 4.7 €/GJ, we calculated a potential decrease in the costs of electricity from 5.6 €ct/kWh in the short term to 4.8 €ct/kWh in the medium term and 4.5 €ct/kWh in the long term. The efficiency penalty is calculated to decline from 7.9%-points LHV in the short term to 4.9%-points and 3.7%-points in the medium and long terms, respectively. In combination with NGCC improvements, this may cause an improvement in the net efficiency, including CO₂ capture, from 49% in the short term to 55% and 58% in the medium and long terms, respectively. The total capital costs including capital costs of the NGCC ware calculated to decline from 880 in the short term to 750 and 690 €/kW in the medium and long terms, respectively, with a decline in the incremental capital costs due to capture from 350 in the short term to 270 and 240 €/kW in the medium and long terms, respectively. Finally, the avoidance costs may decline from 45 €/tCO₂ in the short term to 33 €/tCO₂ in the medium term and 28 €/tCO₂ in the long term.     

Approaches for analyzing local carbon mitigation strategies: Tompkins County,New York,USA

A carbon budget was calculated for Tompkins County, NY, a semi-rural upstate county with a population density of 78 pp/km². The costs and potential for several carbon mitigation options were analyzed in four categories: terrestrial C sequestration, local power generation, transportation, and energy end-use efficiency. This study outlines a methodology for conducting this type of local-scale analysis, including sources and calculations adaptable to different localities. Effective carbon mitigation strategies for this county based on costs/Mg C and maximum potential include reforestation of abandoned agricultural lands, biomass production for residential heating and co-firing in coal power plants, changes in personal behavior related to transportation (e.g., public transportation), installation of residential energy efficient products such as programmable thermostats or compact fluorescent light bulbs, and development of local wind power. The total county emissions are about 340 Gg C/year, with biomass sequestration rates of 121 Gg C/year. The potential for mitigation, assuming full market penetration, amounts to about 234 Gg C/year (69%), with 100 Gg C/year (29%) at no net cost to the consumer. The development of local-scale C mitigation plans based on this sort of model of analysis is feasible and would be useful for guiding investments in climate change prevention.     

Comparing indicators to rank strategies to save potable water in buildings

The main objective of this paper is to compare indicators based on energy consumption and financial savings to rank strategies to save potable water in buildings. The method is based on potable water savings, embodied energy, energy consumption for operation, and investment feasibility analysis; and it was applied to a school in the city of Florianópolis, southern Brazil. The strategies considered to save potable water were rainwater, greywater, water-efficient appliances, and their combinations. The embodied energy was estimated using indices of embodied energy per mass of material, and labour. The indicators used to rank the strategies were potential for potable water savings, index between potable water savings and embodied energy or total energy consumption, net present value, internal rate of return, discounted payback, and index between potable water savings and initial costs. All strategies and combinations were feasible, but the use of water-efficient appliances was the best. Amongst the indicators used to rank the strategies, five of them led to the same ranking. Such indicators can be applied to rank potable water saving strategies in other types of buildings and climates.     

Impacts of urban forests on offsetting carbon emissions from industrial energy use in Hangzhou,China

This study quantified carbon storage and sequestration by urban forests and carbon emissions from energy consumption by several industrial sources in Hangzhou, China. Carbon (C) storage and sequestration were quantified using urban forest inventory data and by applying volume-derived biomass equations and other models relating net primary productivity (NPP) and mean annual biomass increments. Industrial energy use C emissions were estimated by accounting for fossil fuel use and assigning C emission factors. Total C storage by Hangzhou's urban forests was estimated at 11.74 Tg C, and C storage per hectare was 30.25 t C. Carbon sequestration by urban forests was 1,328, 166.55 t C/year, and C sequestration per ha was 1.66 t C/ha/year. Carbon emissions from industrial energy use in Hangzhou were 7 Tg C/year. Urban forests, through sequestration, annually offset 18.57% of the amount of carbon emitted by industrial enterprises, and store an amount of C equivalent to 1.75 times the amount of annual C emitted by industrial energy uses within the city. Management practices for improving Hangzhou's urban forests function of offsetting C emissions from energy consumption are explored. These results can be used to evaluate the urban forests' role in reducing atmospheric carbon dioxide.     

Processing of Straw/Corn Stover: Comparison of Life Cycle Emissions

The LCA emissions from four renewable energy routes that convert straw/corn stover into usable energy are examined. The conversion options studied are ethanol by fermentation, syndiesel by oxygen gasification followed by Fischer Tropsch synthesis, and electricity by either direct combustion or biomass integrated gasification and combined cycle (BIGCC). The greenhouse gas (GHG) emissions of these four options are evaluated, drawing on a range of studies, and compared to the conventional technology they would replace in a western North American setting. The net avoided GHG emissions for the four energy conversion processes calculated relative to a “business as usual” case are 830 g CO₂e/kWh for direct combustion, 839 g CO₂e/kWh for BIGCC, 2,060 g CO₂e/L for ethanol production, and 2,440 g CO₂e/L for FT synthesis of syndiesel. The largest impact on avoided emissions arises from substitution of biomass for fossil fuel. Relative to this, the impact of emissions from processing of fossil fuel, e.g., refining of oil to produce gasoline or diesel, and processing of biomass to produce electricity or transportation fuels, is minor.     

Linking climate policy across economic sectors: A case for green growth in Nepal

While the energy sector is the largest global contributor to greenhouse gas (GHG) emissions, the agriculture, forestry, and other land use (AFOLU) sector account for up to 80% of GHG emissions in the least developed countries (LDCs). Despite this, the nationally determined contributions (NDCs) of LDCs, including Nepal, focus primarily on climate mitigation in the energy sector. This paper introduces green growth—a way to foster economic growth while ensuring access to resources and environmental services—as an approach to improving climate policy coherence across sectors. Using Nepal as a case country, this study models the anticipated changes in resource use and GHG emissions between 2015 and 2030, that would result from implementing climate mitigation actions in Nepal's NDC. The model uses four different scenarios. They link NDC and policies across economic sectors and offer policy insights regarding (1) energy losses that could cost up to 10% of gross domestic product (GDP) by 2030, (2) protection of forest resources by reducing the use of biomass fuels from 465 million gigajoules (GJ) in 2015 to 195 million GJ in 2030, and (3) a significant reduction in GHG emissions by 2030 relative to the business-as-usual (BAU) case by greater use of electricity from hydropower rather than biomass. These policy insights are significant for Nepal and other LDCs as they seek an energy transition towards using more renewable energy and electricity.