Kinetic assessment of the potassium ferrate(VI) oxidation of antibacterial drug sulfamethoxazole

Sulfamethoxazole (SMX), a worldwide-applied antibacterial drug, was recently found in surface waters and in secondary wastewater effluents, which may result in ecotoxical effects in the environment. Herein, removal of SMX by environmentally-friendly oxidant, potassium ferrate(VI) (K(2)FeO(4)), is sought by studying the kinetics of the reaction between Fe(VI) and SMX as a function of pH (6.93-9.50) and temperature (15-45 degrees C). The rate law for the oxidation of SMX by Fe(VI) is first-order with respect to each reactant. The observed second-order rate constant decreased non-linearly from 1.33+/-0.08 x 10(3) M(-1)s(-1) to 1.33+/-0.10 x 10(0) M(-1)s(-1) with an increase of pH from 7.00 to 9.50. This is related to protonation of Fe(VI) (HFeO(4)(-) <==> H(+) + FeO(4)(2-); pK(a,HFeO(4)) = 7.23) and sulfamethoxazole (SH <==> H(+) + S(-); pK(a,SH)=5.7). The estimated rate constants were k(11)(HFeO(4)(-) + SH) = 3.0 x 10(4) M(-1)s(-1), k(12)(HFeO(4)(-) + S(-)) = 1.7 x 10(2) M(-1)s(-1), and k(13) (FeO(4)(2-) + SH) = 1.2 x 10(0) M(-1)s(-1). The energy of activation at pH 7.0 was found to be 1.86+/-0.04 kJ mol(-1). If excess potassium ferrate(VI) concentration (10 microM) is used than the SMX in water, the half-life of the reaction using a rate constant obtained in our study would be approximately 2 min at pH 7. The reaction rates are pH dependent; thus, so are the half-lives of the reactions. The results suggest that K(2)FeO(4) has the potential to serve as an oxidative treatment chemical for removing SMX in water.     

Kinetics and mechanism of nitrite oxidation by hypochlorous acid in the aqueous phase

The rate coefficient for the reaction of nitrite with hypochlorite and hypochlorous acid has been studied using spectrophotometric measurements. The reaction rate has been determined in a wide range of H(+) concentration (5< or =-log[H(+)]< or =11). The kinetics were carried out as a function of NO(2)(-), H(+) and total hypochlorite ([HOCl](total)=[HOCl]+[ClO(-)]+[ClNO(2)]) concentrations. The observed overall rate law is described by: -d[HClO](T)dt=[a[NO(2)(-)](2)+b[NO(2)(-)]][H(+)](2)c+d[H(+)]+e[NO(2)(-)][H(+)](2)[HOCl](total)At T=298 K and in Na(2)SO(4) at an ionic strength (I=1.00 M), we obtained using a nonlinear fitting procedure: a=(1.83+/-0.36)x10(7) s(-1), b=(1.14+/-0.23)x10(5) Ms(-1), c=(1.12+/-0.17)x10(-13) M, d=(1.43+/-0.29)x10(-6) M(2) and e=(1.41+/-0.28)x10(3) M where the errors represent 2sigma. According to the overall rate law, a/b=k(1)/k(3), b/e=k(3), c=K(w), d/c=K(a), d=K(a)K(w) and e=K(1)K(a). In Na(2)SO(4) at an ionic strength (I=1.00 M), the values of K(1) and K(a) are (1.1+/-0.1)x10(-4) and 1.28x10(7) M(-1), respectively. A mechanism is proposed for the NO(2)(-) oxidation which involves the reversible initial step: NO(2)(-)+HOCl left harpoon over right harpoon ClNO(2)+OH(-) (K(1)), while ClNO(2) undergoes the two parallel reactions: attack by NO(2)(-) (k(1)) and hydrolysis (k(3)). ClNO(2) and N(2)O(4) are proposed as important intermediates as they control the mechanism. The rate coefficients k(1) and k(3) have been determined at different ionic strengths in NaCl and Na(2)SO(4). The influence of the ionic strength and ionic environment has been studied in this work.     

Kinetics of hydrolysis and cyclization of ethyl 2-(aminosulfonyl)benzoate to saccharin

The cyclization of ethyl 2-(aminosulfonyl)benzoate (ASB) to give saccharin was investigated in aqueous solutions at pH between 5.2 and 9.5 and in the temperature range of 296.2-334.2 K. The initial concentration of the reactant was varied between 1.45 x 10(-5) and 3.86 x 10(-4) M. Ultraviolet spectroscopy was used to obtain the kinetic data. The reaction is acid catalyzed and follows pseudo-first-order kinetics. The experimental rate constant, k(obs), increases with temperature and pH. Its dependence on the temperature and pH is well described by: k(obs) = k1 [OH-] = [(2.52 +/- 0.9) x 10(16) exp(-20.2 +/- 1 kcalmol(-1)/RT) s(-1)][OH-] A mechanism is proposed and the half-life of ethyl ASB is calculated.     

Chlorination of bisphenol A: kinetics and by-products formation

The kinetics of initial chlorination of bisphenol A (BPA) was studied between pH 2 and 11 at room temperature (20 +/- 2 degrees C). pH Profile of the apparent second-order rate constant of the reaction of BPA with chlorine were modeled considering the elementary reactions of HOCl with BPA species and an acid-catalyzed reaction. The predominant reactions at near neutral pH were the reactions of HOCl with the two phenolate species of BPA (k = 3.10 x 10(4) M(-1)s(-1) for BPA- and 6.62 x 10(4) M(-1) s(-1) for BPA(2-)). At near neutral pH, half-life times of BPA were calculated to be less than 1.5 h for chlorine residual higher than 0.2 mg l(-1). Chlorination of synthetic treated waters spiked with BPA showed that BPA disappeared within 4 h and that chlorinated bisphenol A congeners were rapidly formed and remained in solution for up to 10-20 h when low chlorine dosages are applied (0.5-1 mg l(-1)). To limit their presence in drinking water networks, it is then necessary to maintain high chlorine residuals that rapidly produce and decompose chlorinated bisphenol A congeners.     

Photodegradation of bisphenol Z by UV irradiation in the presence of beta-cyclodextrin

In this work, the formation of the inclusion complex of bisphenol Z (1,1-bis(4-hydroxyphenyl)cyclohexane, abbreviated as BPCH) with beta-cyclodextrin (beta-CD) has been studied, 1:1 inclusion complex can be obtained, the formation constant of the beta-CD/BPCH complex is 5.94x10(3)M(-1). The photodegradation behavior of BPCH was investigated under monochromatic UV irradiation (lambda=254 nm). The photodegradation rate constant of BPCH in aqueous solutions with beta-CD showed a 9.0-fold increase, and simultaneously the mineralization of BPCH can be enhanced by beta-CD. The influence factors on photodegradation of BPCH were also studied and described in details, such as concentration of beta-CD, initial concentration of BPCH, organic solvent and pH. The photodegradation of BPCH in the presence of beta-CD includes the direct photolysis and the photooxidation of BPCH during the photochemical process. Some predominant photodegradation products are 4-(2,4,5-trihydroxy-phenyl)-4-(4-hydroxyphenyl) butanoic acid, 5,5-bis(4-hydroxyphenyl)pentanoic acid, meta-hydroxylated BPCH, ortho-hydroxylated BPCH and 4-(1-(4-hydroxyphenyl)pentyl)phenol respectively. The enhancement of photodegradation of BPCH mainly results from moderate inclusion depth of BPCH molecule in the beta-CD cavity. This kind of inclusion structure allows BPCH molecule sufficient proximity to secondary hydroxyl groups of the beta-CD cavity, and these hydroxyl groups could be activated and converted to hydroxyl radicals under UV irradiation, which can enhance the photooxidation of BPCH.     

Pentachlorophenol association with fulvic acids from recycled wastes

The apparent water solubility of pentachlorophenol was measured at pH=6 and at 25 degrees C in pure water, aqueous solutions of three salts (NaCl, KNO(3) and CaCl(2) at 0.010, 0.10 and 1.0M) and in aqueous solutions of three fulvic acids samples extracted from a natural soil (sFA), composted sewage sludge (csFA) and composted livestock's material (lsFA). A solubility enhancement method was developed for the measurement of partition coefficients (K(oc), L/kg organic carbon). Pentachlorophenol associates strongly with the fulvic acid samples and the calculated K(oc) were the following (averages and standard deviations): (sFA) (211+/-22) x 10(2), (csFA) (253+/-26) x 10(2), (lsFA) (235+/-10) x 10(2). For comparison purposes the K(oc) for pyrene were also calculated for the three FA samples and were the following: (sFA) (119+/-10) x 10(2), (csFA) (239+/-21) x 10(2), (lsFA) (92+/-10) x 10(2). The analysis of variance (one-way ANOVA) of the effect of the type of FA sample on the solubilization of pentachlorophenol and pyrene shows that this factor causes significant differences on the aqueous solubilization of these two organic substances.     

Retention of Cd, Zn and Co on hydroxyapatite filters

This study qualifies and quantifies the immobilization of Cd, Zn and Co, (used as models of bivalent metal ions due to their relevant toxicity) in filters of synthetic hydroxyapatite (HAP) [Ca5(PO4)3OH]. They were flushed with solutions containing Cd (1 x 10(-5)M), Zn and Co (1 x 10(-4)M) at constant pH (8.6) and ionic strength (0.01 M). The concentration of these metal ions in the outlet was measured by ICP-OEM spectroscopy. The software PHREEQC (version 2.4.2) was used to model sorption process and the potential effect of salinity (KCl), pH, alkalinity (NaHCO3) and hardness (CaCl2) over the efficiency of the treatment. Results showed an excellent retention capacity of HAP for Cd, Zn and Co. Sorption data were successfully described considering a mix model of surface complexation onto phosphate surface groups, ionic exchange in surface calcium sites and the precipitation of ZnO. Co exchange and surface complexation constants (Kex and Kc) were taken from previous experiments, while KexCd=0.32 and KcCd=0.63 were estimated from our modeling results. Predictive values of metal ion sorption show that: (a) an increase in hardness does not play a significant role in the retention capacity of these metals on HAP; (b) an increase in alkalinity promotes the precipitation of MeCO3 which could alter the hydrodynamic of the column; (c) a decrease in pH and an increase in salinity inhibit ZnO precipitation enhancing Zn and Cd adsorption and decreasing Co retention on HAP.     

A laser flash photolysis study of the decay of SO4- and Cl2- radical anions in the presence of Cl- in aqueous solutions

The rate constant for the reaction of sulphate radical (SO4-) with Cl- has been determined using laser photolysis, at 248 nm, of peroxodisulphate anions to produce the radicals and time resolved optical absorption of the transient species (at 450 or 480 nm for SO4- and 350 nm for Cl2-) for the kinetic determinations. The experiments were performed, in the absence of added sulphate, as a function of temperature and ionic strength and yielded (at an ionic strength of 0.0157 M): kIV = (9.90+/-0.16) x 10(9) exp((-7.12+/-2.0) kJ mol(-1)/RT) M(-1) s(-1), where the errors reflect the 2sigma statistical error. This reaction produces Cl2-, the formation and decay of which were also monitored allowing a determination of the rate constant of its second-order self-recombination reaction which gave k = (6.50+/-1.40) x 10(8) M(-1) s(-1) at 293 K and zero ionic strength.     

On the uptake and release of zinc (65Zn) in the growing alga Selenastrum capricornutum Printz

A Zn- and pH-buffered medium was used to study the accumulation of Zn in batch-cultured algae (Selenastrum capricornutum Printz.). All experiments were carried out using (65)Zn radiotracers, which were measured by gamma-ray spectrometry. Zinc was applied in the presence of nitrilotriacetic acid (NTA), leading to free Zn(2+) concentrations ranging from 4.2 x 10(-11) to 1.6 x 10(-7) mol litre(-1). During the 75-h experiments, the rates of Zn influx and efflux were determined, the latter with full consideration for algal growth rates. Algal growth stopped completely at a free Zn(2+) concentration of 1.6 x 10(-8) mol litre(-1). Initial Zn binding was determined and, based on free Zn(2+) concentrations, presented by the apparent dissociation constant K(diss) and capacity C as 4.6 x 10(-9) mol litre(-1) and 19.8 x 10(6) mol gDW(-1), respectively. The rate constant of Zn efflux could be calculated as a constant 0.021 +/- 0.003 h(-1), irrespective of the Zn concentrations applied. The rates of Zn influx were expressed by the V(max) and K(M) values as 3.3 x 10(-10) mol gDW(-1) s(-1) and 6.3 x 10(-9) mol litre(-1), respectively. These values, which are based on applied free Zn(2+) concentrations, are compatible with the operation of a high-affinity low-concentration carrier mechanism. The results suggest that, under the conditions applied, free Zn(2+) may be the most relevant Zn species for Zn uptake; furthermore, relative growth rate may be regarded as a relatively sensitive signal for Zn stress circumstances.     

Diffusion of HTO, 36Cl- and 125I- in Opalinus Clay samples from Mont Terri. Effect of confining pressure

Diffusion coefficients (T=23 +/- 2 degrees C) and accessible porosities for HTO, 36Cl(-) and 125I(-) were measured on Opalinus Clay (OPA) samples from the Mont Terri Underground Rock Laboratory (URL) using the through-diffusion technique. The direction of transport (diffusion) was perpendicular to bedding. Special cells that allowed the application of confining pressure were designed and constructed. The pressures ranged from 1 to 5 MPa, the latter value simulating the overburden at the Mont Terri URL (about 200 m). The test solution used in the experiments was a synthetic version of the Opalinus Clay pore water, which has Na(+) and Cl(-) as the main components (I=0.42 M). The measured values of the effective diffusion coefficients (D(e)) and rock capacity factors (alpha) are: D(e)=1.2-1.5 x 10(-11) m(2) s(-1) and alpha=0.09-0.11 for HTO, D(e)=4.0-5.5 x 10(-12) m(2) s(-1) and alpha=0.05 for 36Cl(-) and D(e)=3.2-4.6 x 10(-12) m(2) s(-1) and alpha=0.07-0.10 for 125I(-). For non-sorbing tracers (HTO, 36Cl) the rock capacity factor alpha is equal to the diffusion-accessible porosity epsilon. The experimental results showed that pressure only had a small effect on the value of the diffusion coefficients. Increasing the pressure from 1 to 5 MPa resulted in a decrease of the diffusion coefficient of approximately 17% for HTO, approximately 28% for 36Cl(-) and approximately 30% for 125I(-). Moreover, the diffusion coefficients for 36Cl(-) and 125I(-) are smaller than for HTO, which is consistent with an effect arising from anion exclusion. The diffusion coefficients of HTO and 125I(-) measured in this study are in good agreement with recent measurements at three other laboratories performed within the framework of a laboratory comparison exercise. The values of the diffusion-accessible porosities show a larger degree of scatter.     

Effects of ionic strength on the production of short chain volatile hydrocarbons by Dunaliella salina (Teodoresco)

The effect of ionic strength on the production of short chain volatile hydrocarbons was studied in cultures of Dunaliella salina. Axenic cultures of D. salina were grown at three different ionic strengths 0.5, 2 and 3 M of NaCl in Johnson (J/1) culture medium [Journal of Bacteriology 95 (1968) 1461] under the following laboratory growth conditions: a 12:12 h photoperiod, 300 micromolm(-2)s(-1) of photosynthetic active radiation (PAR) provided by a fluorescent lamp of 40 W combined with a 100 W incandescent lamp at 20 +/- 1 degrees C at pH 7.5. C1 to C5 hydrocarbons were detected using a head space technique and GC-FID. Cell numbers and growth rate was greatest at 2 M NaCl 4.3 x 10(6) cellml(-1) after a 15 days period of culture. Maximum hydrocarbon production was measured in the concentration of 0.5 NaCl with lower production rates in the more concentrated solutions. The principal hydrocarbon was pentane at 0.5 M but was ethane in 2 and 3 M solutions. Production rates for individual compounds ranged between 0.13 and 22 x 10(-15) microgCcell(-1)h(-1). It is suggested that the ability to produce and release volatile organic compounds of D. salina is related to osmotic conditions established by the ionic strength of growth solution.     

The effects of pH on fluoxetine in Japanese medaka (Oryzias latipes): acute toxicity in fish larvae and bioaccumulation in juvenile fish

Recent detection of fluoxetine in the aquatic environment and fish suggests a possibly high accumulation of fluoxetine; however, no report is available on the bioaccumulation of fluoxetine in aquatic organisms. Since bioaccumulation of fluoxetine was probably dependent on pH near the pK(a) value of 10.1, experiments were conducted approximately at pH 7, 8, and 9. Distribution coefficients between 1-octanol and water (D(ow)), and those between synthetic membrane vesicles (liposomes) and water (D(lip-wat)) were determined at pH 7, 8, and 9. The D(ow) and D(lip-wat) values increased significantly with increasing pH. Acute toxicity tests were performed using Japanese medaka (Oryzias latipes) prior to the bioaccumulation test, and 96-h LC(50) values were 5.5, 1.3, and 0.20mgl(-1) at pH 7, 8, and 9, respectively. In the bioaccumulation test, concentrations of fluoxetine and its major metabolite, norfluoxetine, in the fish body and liver were measured. The bioconcentration factors (BCF) of fluoxetine for Japanese medaka were 8.8, 3.0x10, and 2.6x10(2) in the body and 3.3x10(2), 5.8x10(2), and 3.1x10(3) in the liver at pH 7, 8, and 9, respectively. The BCF values were lower at pH 7 and higher at pH 9 mainly because of the increase in nonionized species with significantly higher hydrophobicity than the ionized species at pH values closer to pK(a). A similar trend was obtained for the concentration of norfluoxetine in the fish but the pseudo-BCF values (the ratio of the norfluoxetine concentration in the fish and the fluoxetine concentration in test water) were higher than the BCF value of fluoxetine at all pH conditions.     

Oxidative transformations of environmental pharmaceuticals by Cl₂, ClO₂, O₃, and Fe(VI): kinetics assessment

Several pharmaceuticals have been detected globally in surface water and drinking water, which indicate their insufficient removal from water and wastewater using conventional treatment methods. This paper reviews the kinetics of oxidative transformations of pharmaceuticals (antibiotics, lipid regulators, antipyretics, anticonvulsants, and beta-blockers) by Cl(2), ClO(2), O(3), and ferrate(VI) (Fe(VI)O(4)(2-),Fe(VI)) under treatment conditions. In the chlorination of sulfonamide antibiotics, HOCl is the major reactive Cl(2) species whereas in the oxidation by Fe(VI), HFeO(4)(-) is the dominant reactive species. Both oxidation processes can oxidize sulfonamides in seconds at a neutral pH (t(1/2)≤ 220 s; 1 mg L(-1) HOCl or K(2)FeO(4)). The reactivity of O(3) with pharmaceuticals is generally higher than that of HOCl (k(app,pH 7) (O(3))=1-10(7)M(-1)s(-1); k(app,pH 7) (HOCl)=10(-2)-10(5)M(-1)s(-1)). Ozone selectively oxidizes pharmaceuticals and reacts mainly with activated aromatic systems and non-protonated amines. Oxidative transformation of most pharmaceuticals by O(3) occurs in seconds (t(1/2)≤ 100 s; 1 mg L(-1) O(3)) while half-lives for oxidations by HOCl differ by at least two orders of magnitude. Ozone appears to be efficient in oxidizing pharmaceuticals in aquatic environments. The limited work on Fe(VI) shows that it can also potentially transform pharmaceuticals in treatment processes.     

Kinetics of OH radical reactions with dibenzo-p-dioxin and selected chlorinated dibenzo-p-dioxins

The pulsed laser photolysis/pulsed laser-induced fluorescence (PLP/PLIF) technique has been applied to obtain rate coefficients for OH + dioxin (DD) (k1), OH + 2-chlorodibenzo-p-dioxin (2-CDD) (k2), OH + 2,3-dichlorodibenzo-p-dioxin (2,3-DCDD) (k3), OH + 2,7-dichlorodibenzo-p-dioxin (2,7-DCDD) (k4), OH + 2,8-dichlorodibenzo-p-dioxin (2,8-DCDD) (k5), OH + 1,2,3,4-tetrachlorodibenzo-p-dioxin (1,2,3,4-TCDD) (k6), and OH + octachlorodibenzo-p-dioxin (OCDD) (k7) over an extended range of temperature. The atmospheric pressure (740 +/- 10 Torr) rate measurements are characterized by the following Arrhenius parameters (in units of cm3 molecule(-1) s(-1), error limits are 1 omega): k1(326-907 K) = (1.70+/-0.22) x 10(-12)exp(979+/-55)/T, k2(346-905 K) = (2.79+/-0.27) x 10(-12)exp(784+/-54)/T, k3(400-927 K) = 10(-12)exp(742+/-67)/T, k4(390-769 K) = (1.10+/-0.10) x 10(-12)exp(569+/-53)/T, k5(379-931 K) = (1.02+/-0.10) x 10(-12)exp(580+/-68)/T, k6(409-936 K) = (1.66+/-0.38) x 10(-12)exp(713+/-114)/T, k7(514-928 K) = (3.18+/-0.54) x 10(-12)exp(-667+/-115)/T. The overall uncertainty in the measurements, taking into account systematic errors dominated by uncertainty in the substrate reactor concentration, range from a factor of 2 for DD, 2-CDD, 2,3-DCDD, 2,7-DCDD, and 2,8-DCDD to +/- a factor of 4 for 1,2,3,4-TCDD and OCDD. Negative activation energies characteristic of an OH addition mechanism were observed for k1-k6. k7 exhibited a positive activation energy. Cl substitution was found to reduce OH reactivity, as observed in prior studies at lower temperatures. At elevated temperatures (500 K < T < 500 K), there was no experimental evidence for a change in reaction mechanism from OH addition to H abstraction. Theoretical calculations suggest that H abstraction will dominate OH reactivity for most if not all dioxins (excluding OCDD) at combustion temperatures (>1000 K). For OCDD, the dominant reaction mechanism at all temperatures is OH addition followed by Cl elimination.     

Impact of pH buffer capacity of sediment on dechlorination of atrazine using zero valent iron

This research investigated the role of the pH buffer capacity of sediment on the dechlorination of atrazine using zero valent iron (ZVI). The buffer capacity of the sediment was quantified by batch experiments and estimated to be 5.0 cmol OH(-) . pH(-1). The sediments were spiked with atrazine at 7.25-36.23 mg kg(-1) (6.21 x 10(-7)-3.09 x 10(-6) mol atrazine . g(-1) sediment) for the batch experiments. The buffer capacity of the sediment maintained the sediment suspension at neutral pH, thereby enabling continuous dechlorination until the buffer capacity of the sediment was depleted. The pseudo-first order dechlorination constants were estimated to be in the range of 1.19 x 10(-2)-7.04 x 10(-2) d(-1) for the atrazine-spiked sediments.     

Influence of sorption to dissolved humic substances on transformation reactions of hydrophobic organic compounds in water. Part II: hydrolysis reactions

The effect of dissolved humic acid (HA) on two types of hydrolysis reactions was investigated: (I) dehydrochlorination of gamma-hexachlorocyclohexane (HCH) and 1,1,2,2-tetrachloroethane (TeCA) as a reaction involving hydroxide ions (OH(-)) and (II) hydrolysis of 1-octyl acetate (OA) which is catalyzed by H(+) at the applied pH value (pH 4.5). The rate of TeCA hydrolysis was not affected by addition of 2 g l(-1) of HA at pH 10 (k' = 0.33 h(-1)) but HCH hydrolysis was significantly inhibited (k' = 4.6 x 10(-3) h(-1) without HA and 2.8 x 10(-3)h(-1) at 2 g l(-1) HA). HCH is sorbed by 51% whereas TeCA sorption is insignificant at this HA concentration. Sorbed HCH molecules are effectively protected due to electrostatic repulsion of OH(-) by the net negative charge of the HA molecules. In contrast, OA hydrolysis at pH 4.5 (k' = 1.6 x 10(-5) h(-1)) was drastically accelerated after addition of 2 g l(-1) HA (k' = 1.1 x 10(-3) h(-1)). The ratio of the pseudo-first-order rate constants of the sorbed and the freely dissolved ester fraction is about 70. H(+) accumulation in the microenvironment of the negatively charged HA molecules was suggested to contribute to the higher reaction rate for the sorbed fraction in case of this H(+)-catalyzed reaction. Analogous effects from anionic surfactants are known as micellar catalysis.     

Degradation of octylphenol and nonylphenol by ozone - part II: indirect reaction

The indirect reaction of octylphenol (OP) and nonylphenol (NP) with hydroxyl radicals (*OH) during ozonation was investigated at pH values ranging from 6 to 9. A parameter Rct, representing the ratio of the *OH-exposure to the ozone-exposure, was measured using a method involving a low concentration of p-chlorobenzoic acid as a *OH-probe compound during the ozonation. By assuming that Rct is a constant value at a given pH, the second order rate constants of the alkylphenol reaction with hydroxyl radicals were determined as 1.4(+/-0.2) x 10(10) and 1.1(+/-0.2) x 10(10) M(-1) s(-1) for OP and NP, respectively. The proportions of each alkylphenol degraded by direct molecular ozone reaction and indirect hydroxyl radical reaction were predicted at different pH values. The contribution of indirect *OH reactions with each AP was found to represent over 50% of the total degradation for pH approximately 7, and the contribution increases substantially with pH>7.     

Henry's law constants of phenol and mononitrophenols in water and aqueous sulfuric acid

Phenols are widely present in the atmosphere and nitration probably in the aerosol phase leads to nitrophenols. Nitration by nitric acid in sulfuric acid can be rapid, but little is known of the process under atmospheric conditions. The Henry's law constants K(H)(dagger) of phenol and 2-, 3- and 4-nitrophenol were all measured by a bubble stripping method as: 2820mol kg(-1) atm(-1) (at 298K), 147mol kg(-1) atm(-1) (at 298K), 1.6x10(4)mol kg(-1)atm(-1) (at 308K) and 2.1x10(4)mol kg(-1) atm(-1) (at 308K), respectively. The Henry's law constant of phenol in sulfuric acid systems is lower by more than a factor of two at 1020mol kg(-1) atm(-1) (at 298K) in 40wt% sulfuric acid, which is in line with salting-out of oxygen-containing aromatic compounds in water-sulfuric acid systems. The Henry's law constants of 2- and 4-nitrophenol behave differently and are almost independent of sulfuric acid concentration. The variation of K(H)(dagger) with temperature (T) described in terms of -dln(K(H)(dagger))/d(1/T) does not to vary with sulfuric acid concentration, suggesting enthalpy of dissolution for phenol is independent of sulfuric acid. The series of Henry's law constants measured here can describe the equilibrium situation for phenols in careful determinations of phase partitioning in the atmosphere.     

Oxidation of MCPA and 2,4-D by UV radiation, ozone, and the combinations UV/H2O2 and O3/H2O2

The phenoxyalkyl acid derivative herbicides MCPA (4-chloro 2-methylphenoxyacetic acid) and 2,4-D (2,4-dichlorophenoxyacetic acid) were oxidized in ultrapure water by means of a monochromatic UV irradiation and by ozone, as well as by the combinations UV/H2O2 and O3/H2O2. In the direct photolysis of MCPA, the quantum yield at 20 degrees C was directly evaluated and a value of 0.150 mol Eins(-1) was obtained in the pH range 5-9, while a lower value of 0.41 x 10(-2) mol Eins(-1) was determined at pH=3. Similarly, for 2,4-D a value of 0.81 x 10(-2) mol Eins(-1) was deduced, independent of the pH of work. The influence of the additional presence of hydrogen peroxide was established in the combined process UV/H2O2, and the specific contribution of the radical pathway to the global photo-degradation was evaluated. The oxidation by ozone and by the combination O3/H2O2 was also studied, with the determination of the rate constants for the reactions of both herbicides with ozone and hydroxyl radicals at 20 degrees C. These rate constants for the direct reactions with ozone were 47.7 and 21.9 M(-1) s(-1) for MCPA and 2,4-D respectively, while the found values for the rate constants corresponding to the radical reactions were 6.6 x 10(9) and 5.1 x 10(9) M(-1) s(-1).     

Bromate formation on the non-porous TiO2 photoanode in the photoelectrocatalytic system

The increasing use of ozone in water disinfection processes has been the focus of considerable concern in regards to inorganic disinfection by product formation of bromate in waters containing bromide. Due to the public health risk caused by the presence of bromate as a suspected carcinogen, attention had been addressed to the conditions under which bromate is formed. In this study, photoanodic bromine generation and bromate (BrO(3)(-)) formation were investigated using a TiO(2) electrode in a photoelectrocatalytic (PEC) treatment process. The separation of anodic and cathodic reactions in the PEC system resulted in a pH decrease from 9.3 to 3.0 in the photoanode compartment and an increase to 11.0 in the cathode compartment. Under a photo-illumination intensity of 5.7 m W cm(-2) UV, a biasing potential of +1.0V vs SCE, a pH of 6.0 and at a NaBr concentration of 1.0 x 10(-2) M, active bromine formation increased over time with 2.4 x 10(-6) M min(-6) rate and reached a steady-state concentration of 1.44 x 10(-4) M in 60 min. Bromate formation was detected after a lag-period of 15 min and exhibited a continuous increasing trend with respect to irradiation time. No bromate formation was observed below pH 6.5 whereas an increasing bromate concentrations and pH up to pH=8.5 were noted.