SUMMA罐采样-GC/MS法测定吸烟室内空气中挥发性有机物

采用空气预浓缩与气相色谱/质谱联用技术对空气中59种痕量挥发性有机化合物进行定性与定量分析,应用研究的技术对吸烟室烟草空气中的挥发性有机物成分定性解析,对59种常见挥发性有机污染物定量检测.室内环境烟草空气中检出多种挥发性有机污染物,主要有烯烃、烷烃、苯系物等有害成分,不仅对被动吸烟人群造成危害,同时也影响大气环境质量...     

涂料中挥发性有机化合物对建筑室内的环境污染

介绍了醇酸调和漆、防锈漆和清漆3种涂料中挥发性有机化合物对建筑物室内的环境污染,并利用静态释放气体试验法,研究了3种涂料释放挥发性有机化合物的规律。     

杭州市交通干线空气中挥发性有机物研究

研究了杭州市四季交通干线空气中挥发性有机物分布和浓度特征,得出汽车尾气是市区交通干线空气中挥发性有机物的主要污染来源,且有机物浓度与交通干线繁忙程度成正比,杭州市交通干线空气中挥发性有机物污染以春季最为严重,秋季最轻。     

便携式GC-MS在应急监测中的应用

建立了便携式GC-MS测定空气和水体中挥发性有机物(VOCs)的方法,能快速、有效地对空气中37种和水体中54种挥发性有机物进行现场定性和定量。具有相关性好、检出限低、精密度好、准确度高的特点,适用于空气和水体中挥发性有机物的应急监测工作。     

空调房间空气中甲醛污染的分布特性

现代高层商务、办公楼采用中央空调系统保障室内环境温、湿度的舒适性,除了增加新风外,大部分空气室内循环.但办公家具板材中含的甲醛等污染物释放,会造成室内空气的污染,影响人体的健康[1].于2005年5月对青岛市某邻海高层商务楼的8层海景房间空气中甲醛进行测试分析.     

列车车厢内装材料VOCs释放特性研究

列车车厢内的空气质量对乘客的健康和乘坐舒适度有明显影响.密闭车厢的内装材料所释放的挥发性有机物(VOCs)是影响车厢内环境空气质量的主要污染物.为研究25G型客车车厢内空气VOCs浓度的分布机理及扩散规律,采用环境测试舱法和扫描电镜(SEM)表征,对车厢主要内装材料(座椅坐垫、PVC地板、墙板等)的VOCs释放速率进行...     

承德市室内环境质量污染现状调查与研究

对承德市160家宾馆、饭店、歌舞厅等公共场所,80个民用建筑工程项目,80余家个人家庭装修进行室内环境检测,发现不同场所室内主要超标污染物不同。新建公共场所和个人家装室内空气主要污染物为总挥发性有机物、甲醛、苯、氨,已建成的重点公共场所空气超标污染物主要为二氧化碳、菌落总数,民用建筑工程超标污染物主要为氨。     

深圳市宝安区环境空气有机污染现状研究

采用热脱附和气相色谱-质谱联用技术研究了深圳市宝安区环境空气中挥发性有机物的组成,从中鉴定出18种有机化合物,并通过对其中5种苯系物的定量分析结果,讨论了宝安区环境空气有机污染状况。     

岷江成都段有机物污染调查

对岷江成都段有机物污染进行了调查。共设置7个监测断面,共定性检出431种有机物：经过筛选确定苯系物、多环芳烃、有机氯农药、多氯联苯和挥发性卤代烃为主要污染物。对这5类有机污染物定量分析,并对其时空分布及其成因进行了探讨。指出,随着工业的发展,有机物污染问题日益突出,有机化合物的数目增加的很快,我国目前对有毒有害化合物的评价标准远远满足不了需要。建议在严格控制现有有毒有害化合物的基础上制定出更多的评价标准。     

不同类型机动车尾气挥发性有机化合物排放特征研究

机动车尾气主要成分包括一氧化碳、氮氧化物、碳氢化合物、铅及苯并[a]芘等.其中,挥发性有机化合物由于其对光化学烟雾的贡献及对人体健康的影响而成为近年来大气化学研究的热点.文章首次对北京市9种车辆、5种燃料在不同工况下排放挥发性有机化合物特征进行了定量研究.结果表明,车型、燃料、净化器及工况等因素对排放量产生影响,电喷车比化油器车排放低,其中,夏利比富康与奥迪排放量高;LPG与汽油车排放量最高,柴油车与CNG车排放最低.其中,-10#柴油车比0#柴油车排放更低;使用净化器可以降低挥发性有机化合物排放量;不同工况对排放量的影响随车型、燃料类型的不同而不同.因此,使用清洁燃料、安装净化器和使用电喷装置,可减少尾气中挥发性有机化合物含量.     

商业步行街的环境空气污染

阐述了商业步行街的环境空气污染对人群健康造成危害的原因,通过在广州市北京路和下九路,以及周围交通街道模拟行人行走方式的采样和分析,得出在广州市商业步行街及其周围交通街道空气中,除了含有有毒有害的挥发性有机物、PM10、和CO等,芳香烃类等化合物的浓度水平也普遍较高,特别是苯和甲苯。另外,周围交通街道上的机动车尾气排放对商业步行街的环境空气质量也有影响。     

Volatile metabolites from microorganisms grown on humid building materials and synthetic media

Growth of different microorganisms is often related to dampness in buildings. Both fungi and bacteria produce complicated mixtures of volatile organic compounds that include hydrocarbons, alcohols, ketones, sulfur- and nitrogen-containing compounds etc. Microbially produced substances are one possible explanation of odour problems and negative health effects in buildings affected by microbial growth. A mixture of five fungi, Aspergillus versicolor, Fusarium culmorum, Penicillium chrysogenum, Ulocladium botrytis and Wallemia sebi were grown on three different humid building materials (pinewood, particle board and gypsum board) and on one synthetic medium. Six different sampling methods were used, to be able to collect both non-reactive volatile organic compounds and reactive compounds such as volatile amines, aldehydes and carboxylic acids. Analysis was performed using gas chromatography, high-performance liquid chromatography and ion chromatography, mass spectrometry was used for identification of compounds. The main microbially produced metabolites found on pinewood were ketones (e.g. 2-heptanone) and alcohols (e.g. 2-methyl-1-propanol). Some of these compounds were also found on particle board, gypsum board and the synthetic medium, but there were more differences than similarities between the materials. For example, dimethoxymethane and 1,3,5-trioxepane and some nitrogen containing compounds were found only on particle board. The metabolite production on gypsum board was very low, although some terpenes (e.g. 3-carene) could be identified as fungal metabolites. On all materials, except gypsum board, the emission of aldehydes decreased during microbial growth. No low molecular weight carboxylic acids were identified.     

室内空气有机污染的研究现状

主要讨论了室内空气中有机物污染的研究现状。重点介绍了室内空气中多环芳烃 (PAHs)、挥发性有机物(VOCs)、醛类化合物等的污染状况及来源。简要叙述了室内空气污染的影响因素及对人体的健康风险评价。     

石家庄大气中优先控制挥发性有机物筛选

综合考虑国内外优先控制污染物筛选的方法,结合实际调查情况,制定了石家庄市大气中优先控制挥发性有机物筛选的原则。对检出率高、贡献率高,可能对人体健康存在潜在危害性的挥发性有机物作筛选,提出了包含20种化合物的优先控制名单,其中卤代烃7种,芳香烃5种,酯类3种,酮类2种,烯烃、醛类和硫化物各1种。从化合物的用途和应用领域分析,医药化工行业可能是石家庄市区大气中挥发性有机物的主要排放源。     

Pentachlorophenol in indoor environments. Does a single measurement of air and dust concentrations represent the contamination?

In order to be able to make a decision, as to whether a room or building has a health-endangering pentachlorophenol (PCP) concentration, usually the PCP concentrations in air and settled dust are measured. The variability of the PCP concentration in indoor air and dust was studied. Air and dust samples were taken from 75 rooms in 30 buildings with suspicion of application of PCP-containing wood preservatives. Sampling was repeated four times within 18 months. Thirty-six rooms were reconstructed within the study; 39 rooms had unchanged contamination status during the study. The four times repeated measurements of PCP concentrations in air and dust in these rooms showed large variations of the measured values. The variability of the results is to a large extent in the same range as the measured values. The observed relative standard deviation of the PCP concentrations in air and dust does not depend on the average PCP concentration detected in the individual rooms.     

Sampling gaseous oxidation products of aromatic compounds in gas/particle separation systems

In this study we performed a direct comparison between two different ambient air samplers to characterize their performance in sampling oxidized gaseous organic compounds, known as oxidation products of aromatics. We investigated compounds with a variety of functional groups and vapor pressures. A polyurethane foam (PUF) adsorbent and an annular diffusion denuder sampler were operated along with particle filters. In both systems the sampling devices were liquid-extracted, followed by derivatization and analysis by GC-MS. The PUF system works very well for aromatic as well as non-aromatic compounds, whereas the denuder shows smaller collection efficiencies for highly volatile non-aromatic compounds. In addition, the sampling efficiencies in the PUF set-up are in good agreement with the calculated vapor pressures of the compounds and also the particle phase is not affected by most compounds.     

《涂料、油墨及胶粘剂工业大气污染物排放标准》(GB 37824—2019)解读

简述了我国涂料、油墨及胶粘剂工业的污染排放现状与特征,对《涂料、油墨及胶粘剂工业大气污染物排放标准》(GB 37824—2019)进行了解读。该标准在我国打赢蓝天保卫战三年行动计划的背景下发布实施,从全过程控制的角度构建了大气污染物排放指标体系,明确了以非甲烷总烃(NMHC)和总挥发性有机物(TVOC)为综合表征,与有毒有害特征污染物协调控制的挥发性有机物(VOCs)排放指标体系;提出了涂料、油墨、胶粘剂工业无组织排放控制要求和监测监控要求。指出,涂料、油墨及胶粘剂工业的VOCs控制以无组织排放为主,因此必须从源头减排入手,强化全过程控制和全生命周期控制,环境与安全协同,逐步实现行业可持续发展。     

Volatile Organic Compounds: Sampling Methods and Their Worldwide Profile in Ambient Air

The atmosphere is a particularly difficult analytical system because of the very low levels of substances to be analysed, sharp variations in pollutant levels with time and location, differences in wind, temperature and humidity. This makes the selection of an efficient sampling technique for air analysis a key step to reliable results. Generally, methods for volatile organic compounds sampling include collection of the whole air or preconcentration of samples on adsorbents. All the methods vary from each other according to the sampling technique, type of sorbent, method of extraction and identification technique. In this review paper we discuss various important aspects for sampling of volatile organic compounds by the widely used and advanced sampling methods. Characteristics of various adsorbents used for VOCs sampling are also described. Furthermore, this paper makes an effort to comprehensively review the concentration levels of volatile organic compounds along with the methodology used for analysis, in major cities of the world.