Methodological scheme for designing the monitoring of genetically modified crops at the regional scale

According to EC regulations the deliberate release of genetically modified (GM) crops into the agro-environment needs to be accompanied by environmental monitoring to detect potential adverse effects, e.g.unacceptable levels of gene flow from GM to non-GM crops, or adverse effects on single species or species groups thus reducing biodiversity. There is, however, considerable scientific and public debate on how GM crops should be monitored with sufficient accuracy, discussing questions of potential adverse effects, agro-environmental variables or indicators to be monitored and respective detection methods; Another basic component, the appropriate number and location of monitoring sites, is hardly considered. Currently, no consistent GM crop monitoring approach combines these components systematically. This study focuses on and integrates spatial agro-environmental aspects at a landscape level in order to design monitoring networks. Based on examples of environmental variables associated with the cropping of Bt-Maize (Zea maize L.), herbicide-tolerant (HT) winter oilseed rape (Brassica napus L.), HT sugar beet (Beta vulgaris L.), and starch-modified potato (Solanum tuberosum L.), we develop a transferable framework and assessment scheme that comprises anticipated adverse environmental effects, variables to be measured and monitoring methods.These we integrate with a rule-based GIS (geographic information system) analysis, applying widely available spatial area and point information from existing environmental networks. This is used todevelop scenarios with optimised regional GM crop monitoring networks.     

A method for assessing generalised nitrogen leaching estimates for agricultural land

The purpose of this study was to develop a method for assessing generalised N leaching estimates from large areas of agricultural land. The system developed was based on calculating a number of N leaching estimates for different typical cropping situations. The estimates were normalised with respect to varying weather conditions and crop production. The different cropping situations were described by setting up a matrix consisting of crucial factors influencing leaching such as soils, crops and climate. Nitrogen leaching was then estimated for a number of combinations of these factors. Calculations were made for three different regions where all the major crops were cultivated on soils with seven different textures and four different organic-N classes and two fertilisation regimes. The three regions are representative of climates and agricultural practices in some of the major agricultural areas in Sweden. The model used was the SOILN model. Leaching of nitrogen from the root zone showed large variations. The range was from 1 to 50 kg ha⁻¹ for different soils and crops when only fertiliser N was applied. Leaching varied both due to different climates and differences in cultivation practices between the regions. Leaching decreased in a south-north gradient. Leaching increased as a result of greater mineralisation when the organic matter content in the soils was increased, leaching was less from soils with a high clay content and was very small for the heavy clay soil. This revised version was published online in July 2006 with corrections to the Cover Date.     

Environmental monitoring of genetically modified crops

Genetically modified (GM) crops are now approved for commercial use in several world areas. In terms of commercial acreage, the majority of these products possess either herbicide tolerance or insect protection traits. Prior to commercialization, each product underwent a country specific review of environmental safety data by independent regulatory authorities. Registration was granted after review of the data allowed authorities to conclude that the risks were minimal or manageable when balanced with the benefits. As a condition of registration, insect resistance management (IRM) has been imposed for insect protected products in most countries. Other world areas have reviewed similar data packages and have not yet been able to grant registration for commercial release. Post-registration environmental monitoring of GM crops is viewed in some world areas as a means of enabling approvals by addressing uncertainty that exists with this technology. Questions such as, who should monitor and who should pay for it, how should monitoring be conducted, what information is necessary to collect and how long should a given product be monitored are yet to be answered. Monitoring methods could be general (surveys and questionnaires) or specific (scientific studies to address specific questions). Independent research currently underway in countries where GM crops are commercial involves monitoring the benefits as well as the risks of these products. Experience with other products has shown that monitoring of GM crops will be of value only if the questions are clearly defined, the methods are appropriate and the end points (data collected) are interpretable.     

Assessing the regional impacts of increased energy maize cultivation on farmland birds

The increasing cultivation of energy crops in Germany substantially affects the habitat function of agricultural landscapes. Precise ex ante evaluations regarding the impacts of this cultivation on farmland bird populations are rare. The objective of this paper was to implement a methodology to assess the regional impacts of increasing energy maize cultivation on the habitat quality of agricultural lands for farmland birds. We selected five farmland bird indicator species with varying habitat demands. Using a crop suitability modelling approach, we analysed the availability of potential habitat areas according to different land use scenarios for a real landscape in Northeast Germany. The model was based on crop architecture, cultivation period, and landscape preconditions. Our results showed that the habitat suitability of different crops varied between bird species, and scenario calculations revealed an increase and a decrease in the size of the potential breeding and feeding habitats, respectively. The effects observed in scenario 1 (increased energy maize by 15 %) were not reproduced in all cases in scenario 2 (increased energy maize by 30 %). Spatial aggregation of energy maize resulted in a negative effect for some species. Changes in the composition of the farmland bird communities, the negative effects on farmland bird species limited in distribution and spread and the relevance of the type of agricultural land use being replaced by energy crops are also discussed. In conclusion, we suggest a trade-off between biodiversity and energy targets by identifying biodiversity-friendly energy cropping systems.     

Airborne rice pollen and pollen allergen in an agricultural field: aerobiological and immunochemical evidence

Grass pollens are well known among the health hazardous bioaerosols causing respiratory allergy. Being an important member of the grass family, the rice plants contribute a huge pollen load in agricultural fields during flowering. This results in a seasonal trigger of hay fever and respiratory allergy in the field workers and people living in the vicinity. Studies on the monitoring of airborne rice pollen and the intensity of the released allergen in agricultural fields are largely lacking. The aims of the present study were: (1) daily and hourly monitoring of airborne rice pollen in an agricultural field during the flowering period of plants in a winter crop season by using the Burkard 7-Day Volumetric Sampler and (2) the measurement of hourly airborne allergen intensity in the field in a peak rice pollen period by the double-antibody and chemiluminescence techniques to find out its relationship with the airborne rice pollen concentration. The monthly average concentration of rice pollen was 95 pollen m(-3) and the range of daily average pollen concentration was 0 to 386 pollen m(-3). A bimodal diurnal periodicity showed that the airborne rice pollen concentrations remained high at two different times of the day: between 08:00 h to 12:00 h and 14:00 h to 16:00 h. Deposition of airborne rice pollen allergen showed darker intensities on the immunostained tapes from the Burkard Sampler at the same two positions corresponding to higher pollen counts. These observations provided direct evidence of the allergenicity of airborne rice pollen in field conditions.     

Assessment of ozone effects on local rice cultivar by portable ozone fumigation system in Hanoi, Vietnam

This study examined the effects of troposphere ozone (O3) on rice by developing a portable ozone fumigation system and applied to the field in Hanoi, Vietnam. The system was nearly identical to the open top chamber but designed to easily and cheaply assess the O3 sensitivity of local agricultural crops in the actual field. The rice (Oryza sativa L.) was exposed to ozone during the flowering stage at peri-urban experimental site of Hanoi. The fumigation protocols covered five different levels, namely; non-filtered air (ambient) as the control treatment, 32, 62, 85 and 113 ppb in 7-h mean. It was found that observed impacts corresponded well to similar open-top chamber studies in other Asian countries. The methodology and the system left a large room for improvement and called for very careful interpretation and pre-conditions (e.g. low ambient O3 concentration). However, the portable O3 exposure in the field might open a door to the less developed countries to implement the phytotoxic risk assessment of the local agricultural species.     

Reliability of nitrogen dioxide passive diffusion tubes for ambient measurement: in situ properties of the triethanolamine absorbent

Factors concerning NO2 uptake by the absorbent triethanolamine (TEA) in NO2 diffusion tubes are examined. Although the nominal freezing point of TEA is 17.9-21.2 degrees C, we show that, for a range of aqueous TEA solutions (0-20%, H2O), no freezing occurs even at -10 degrees C. Therefore NO2 collection efficiency is unlikely to be impaired by low temperature exposure. The recovery of TEA from the meshes of exposed samplers is determined as approximately 98%, even after 42 days, showing that the stability in situ of TEA is unaffected by long-term exposure. A model of a diffusion tube sampling array for simultaneous exposures, with a 0.1 m sampler spacing, shows that NO2 uptake by individual samplers is not affected by the presence of neighbouring tubes in the array. This is confirmed by sampler precision at two Cambridge sites. Four sampler preparation methods are compared for differences in NO2 uptake of exposed samplers. All methods employ TEA as absorbent, transferred by either dipping meshes in a TEA-acetone solution or pipetting aliquots of a TEA-H2O solution onto the meshes. For samplers prepared by three of the methods, no difference in NO2 uptake is found, but for samplers prepared using a 50% v/v TEA-H2O solution, a mean reduction of 18% is found. Student's t-tests show that the difference is highly significant (P < or = 0.001). Reasons for the difference are discussed.     

Assessment of the Condition of Agricultural Lands in Five Mid-Atlantic States

Indicators of the condition and sustainability of agricultural lands in five Mid-Atlantic states were measured in 1994. Indicators were selected to reflect crop productivity and land stewardship on annually harvested herbaceous crop (AHHC) land, which covers almost 10% of the land area in this region. Overall, condition of agricultural lands in the region is good. Crops generally yielded more than those grown in the 1980s, with a mean observed/expected yield index greater than 1. The mean soil quality index was slightly better than a "moderate" rating for crop growth. Almost 2/3 of the AHHC land is covered by crop rotation plans, with the remaining land mostly in hay fields. Insecticides were applied to less than 20% of AHHC land, and less than 20% of the land where pesticides were applied has high to moderately high potential for pesticides leaching into groundwater. However, integrated pest management (IPM) is practiced on less than 20% of AHHC land. Hay showed more efficient use of nitrogen than seed crops, and non-tilled sites, which are mostly hay, had more microbial biomass (suggesting more nutrient cycling) than tilled sites. This information could provide a baseline for a long-term monitoring program for agroecosystems in the region.     

Overview of particulate exposures in the US trucking industry

As part of a large epidemiologic study of lung cancer, 55,000 subjects, we have conducted a nation-wide survey of particulate exposures in the US trucking industry. The goal is to differentiate the risks from various types of particulate exposures, such as traffic emissions and general air pollution. We hypothesize that exposures defined by job and work site characteristics can be linked with subjects using their personal job histories. This report covers exposures at 36 randomly chosen large truck freight terminals in the US. Measurements were made of PM2.5, elemental carbon (EC), and organic carbon (OC) upwind of the terminal (background) and in work areas, and by personal samples. Significant differences in exposure intensity, microg m(-3), were found for work locations and jobs relative to background levels (GM[GSD]) at terminal sites: PM2.5 9.8[2.34], EC 0.5[3.24], and OC 5.0[1.76]. Using EC as a marker for diesel particles, work locations varied significantly: office 0.3[3.7], dock area 0.7[2.89] and shop area 1.5[3.52]), as did job titles (non-smokers): clerk 0.1[9.98], dock worker 0.8[2.13], and mechanic 2.0[3.82]. Cigarette smoking contributed substantially to personal exposures, approximately doubling PM2.5 and OC, but having less of an effect on EC. Large differences were seen across the terminal sites due to differences in local regional air pollution levels from traffic and other sources. We conclude that it will be possible to estimate current exposures of the cohort using an exposure assignment matrix based on job title, work location, and terminal site. This distribution overlaps substantially with the general public's exposure to these sources.     

Selecting objectively defined reference sites for stream bioassessment programs

Our study develops and demonstrates an objective method for selecting reference sites for the assessment of ecological condition in freshwater ecosystems. The method uses widely available GIS data to group potential sites based on their natural environments. It then establishes the degree and types of human activities each site is exposed to prior to scoring the sites in each group by the relative amount of human activity present. Finally, the sites in each group with the least amount of human activity are categorized as reference sites, with the boundary between reference and test sites defined to maximize the distinctiveness of the two categories with respect to human activity. Application of this technique for the purpose of identifying headwater reference basins in rural areas of southwestern Ontario resulted in the classification of basins into six natural groups based on the dominant texture of the surface geology. Development of a human activity gradient indicated that basins varied according to the amount of exposure to agricultural activities with most basins having at least moderate exposure. Establishment of the reference test boundary indicated that the selected reference basins exhibited substantively lower extents of agricultural activity than test sites for most groups. Because this method uses only widely available GIS data, it enables rapid and cost-effective identification of candidate reference sites, even for large, remote, and understudied regions.     

Air pollution exposure monitoring and estimating. Part I. Integrated air quality monitoring system

This paper presents an integrated exposure monitoring system, based on an expansion of existing air quality monitoring systems using dispersion modelling. The system allows: (1) identifying geographical areas whose inhabitants are most exposed to ambient pollution; (2) identifying how many people in an area are exposed to concentrations of pollution exceeding air quality guidelines; (3) describing the exposure of population subgroups (e.g. children); (4) planning pollution abatement measures and quantifying their effects; (5) establishing risk assessment and management programs, and (6) investigating the short- and long-term effects of both pollutants and pollution sources on public health. The effect of pollution is rarely very large and in order to discover it, exposure estimation must provide data that reflects both spatial and temporal variations. Estimates of pollution exposure are obtained using an integrated approach that combines results of measurements from monitoring programs with dispersion calculations. These values can serve as estimates for individual short-term or long-term exposure. The grouped data allows the expression of ambient pollution concentrations as the spatial distribution of estimates such as the mean or 98th percentile of such compounds as SO2, O3, NO2, PM10 and PM2.5. This integrated approach has been combined into a single software package, AirQUIS.     

First Step for an Ecological Risk Assessment to Evaluate the Impact of Diffuse Pollution in Lake Vela (Portugal)

Lake Vela, located in the Portuguese littoral-centre, is a temperate shallow lake exhibiting a high trophic status. This aquatic ecosystem has been potentially exposed to contamination generated by agricultural and livestock activities held in their drainage basin, which seriously compromise their health. This work summarizes some background information and presents the problem formulation step of the ERA. Therefore, it evaluates the characteristics of the stressor(s), describes the ecological system and receptors and suggests a conceptual model, which predicts the potential exposure pathways, relating suspected sources to the defined endpoints. This introductory step also described an analysis plan on the entire study, which includes a delineation of the assessment design, data needs, measures, and methods for conducting the analysis phase of the risk assessment process.     

Environmental and Biological Assessment of Exposure to Benzene in Petroleum Workers

Occupational exposure to benzene was measured in two gasoline marketing terminals and five major refineries in Singapore. A total of 280 workers were monitored over two years. This assessment was carried out with two primary objectives: (1) To find out the extent of occupational exposure to benzene in the petroleum industry in Singapore, (2) To identify suitable biomarkers for monitoring of low levels of benzene exposure. The exposure was measured in five different categories of petroleum and petrochemical workers, i.e., truck drivers, despatch assistant, process operators, oil movements operators and laboratory technicians. The results revealed wide variations in exposure, from 0.01 to 13.6 ppm for personal time weighted average (TWA) exposure over the whole workshift. The exposure of truck drivers appeared to be the highest, with geometric mean (GM) of 1.98 ppm (ranged from 0.25 to 13.6 ppm). The average benzene exposure for process operators was relative low with a GM of 0.04 ppm. Lowest benzene exposure was found in the laboratory technicians, with a GM of 0.02 ppm. As cigarette smoking is known to affect metabolism of benzene, data analyses on the relationships with environmental exposure were conducted only on the 190 nonsmokers. The results showed that urinary trans, trans-muconic acid (ttMA), unmetabolized benzene in urine (UBZ) and benzene in blood (BBZ) were better biomarkers for low level benzene exposure as compared to urinary phenolic metabolites in urine, such as hydroquinone, phenol and catechol.     

Probabilistic risk assessment of insecticide concentrations in agricultural surface waters: a critical appraisal

Due to the specific modes of action and application patterns of agricultural insecticides, the insecticide exposure of agricultural surface waters is characterized by infrequent and short-term insecticide concentration peaks of high ecotoxicological relevance with implications for both monitoring and risk assessment. Here, we apply several fixed-interval strategies and an event-based sampling strategy to two generalized and two realistic insecticide exposure patterns for typical agricultural streams derived from FOCUS exposure modeling using Monte Carlo simulations. Sampling based on regular intervals was found to be inadequate for the detection of transient insecticide concentrations, whereas event-triggered sampling successfully detected all exposure incidences at substantially lower analytical costs. Our study proves that probabilistic risk assessment (PRA) concepts in their present forms are not appropriate for a thorough evaluation of insecticide exposure. Despite claims that the PRA approach uses all available data to assess exposure and enhances risk assessment realism, we demonstrate that this concept is severely biased by the amount of insecticide concentrations below detection limits and therefore by the sampling designs. Moreover, actual insecticide exposure is of almost no relevance for PRA threshold level exceedance frequencies and consequential risk assessment outcomes. Therefore, we propose a concept that features a field-relevant ecological risk analysis of agricultural insecticide surface water exposure. Our study quantifies for the first time the environmental and economic consequences of inappropriate monitoring and risk assessment concepts used for the evaluation of short-term peak surface water pollutants such as insecticides.     

Higher plants as indicators and accumulators of gaseous air pollution

Some higher plant species or varieties are very sensitive to certain gaseous air pollutants, and the resulting effects show sometimes more or less specific, well-visible and measurable symptoms.On this basis several species and varieties of natural and cultivated plants have been selected to serve as biological indicators for the possible presence of certain air polluting substances. But these indicator plants may also be used for the quantitative determination of the effect intensities of the air pollutants involved.Besides, some plant species or varieties may accumulate certain components of air pollution, without changing these substances, in such a way that after accumulation in the plants these substances may be analyzed physicochemically (qualitatively and quantitatively).Definitions are proposed and examples are given of both indicator and accumulator plants. Also information is displayed on the methods for the use of plants as indicators and accumulators of air pollutants (standardized system of plant cultivation and exposure). Some applications of biomonitoring the effects of air pollution with plants are discussed and illustrated with data from The Netherlands.Paper presented at a Symposium held on 14 and 15 October 1982, in Utrecht, The Netherlands.     

Spatial Relationships Between Water Quality and Pesticide Application Rates in Agricultural Watersheds

Pesticide applications to agricultural lands in California, USA, are reported to a central data base, while data on water and sediment quality are collected by a number of monitoring programs. Data from both sources are geo-referenced, allowing spatial analysis of relationships between pesticide application rates and the chemical and biological condition of water bodies. This study collected data from 12 watersheds, selected to represent a range of pesticide usage. Water quality parameters were measured during six surveys of stream sites receiving runoff from the selected watershed areas. This study had three objectives: to evaluate the usefulness of pesticide application data in selecting regional monitoring sites, to provide information for generating and testing hypotheses about pesticide fate and effects, and to determine whether in-stream nitrate concentration was a useful surrogate indicator for regional monitoring of toxic substances. Significant correlations were observed between pesticide application rates and in-stream pesticide concentrations (p < 0.05) and toxicity (p < 0.10). In-stream nitrate concentrations were not significantly correlated with either the amount of pesticides applied, in-stream pesticide concentrations, or in-stream toxicity (all p > 0.30). Neither total watershed area nor the area in which pesticide usage was reported correlated significantly with the amount of pesticides applied, in-stream pesticide concentrations, or in-stream toxicity (all p > 0.14). In-stream pesticide concentrations and effects were more closely related to the intensity of pesticide use than to the area under cultivation.     

A proposed impact assessment method for genetically modified plants (AS-GMP Method)

An essential step in the development of products based on biotechnology is an assessment of their potential economic impacts and safety, including an evaluation of the potential impact of transgenic crops and practices related to their cultivation on the environment and human or animal health. The purpose of this paper is to provide an assessment method to evaluate the impact of biotechnologies that uses quantifiable parameters and allows a comparative analysis between conventional technology and technologies using GMOs. This paper introduces a method to perform an impact analysis associated with the commercial release and use of genetically modified plants, the Assessment System GMP Method. The assessment is performed through indicators that are arranged according to their dimension criterion likewise: environmental, economic, social, capability and institutional approach. To perform an accurate evaluation of the GMP specific indicators related to genetic modification are grouped in common fields: genetic insert features, GM plant features, gene flow, food/feed field, introduction of the GMP, unexpected occurrences and specific indicators. The novelty is the possibility to include specific parameters to the biotechnology under assessment. In this case by case analysis the factors of moderation and the indexes are parameterized to perform an available assessment.