核电站温排水卫星遥感监测应用研究

选取我国 HJ－1 B卫星红外相机为遥感数据源，在介绍了温排水卫星遥感监测的技术流程和基本原理之后，重点论述了海表温度反演的算法和基准温度提取的基本原则。以2013年1月17日大亚湾核电站和2013年5月22日田湾核电站2景 HJ－1 B红外相机数据为应用实例，说明了卫星遥感监测可作为开展核电站温排水影响监测与热污染评价的首选技术方向和主要监测手段，阐述了其在核电站温排水影响后评估中的作用和意义。     

遥感技术在水生态环境管理的应用与前景

随着遥感数据源的不断丰富,遥感技术不断提高,可以解决越来越多的水环境问题。指出了当前水生态环境管理方面的主要需求,结合目前遥感技术的发展,对国内外的水环境遥感研究进展进行综述。以湖泊富营养化监测与评估、核电站温排水遥感监测及城市黑臭水体遥感监测为案例,具体阐述遥感在水环境管理中的应用方法及成效。未来水生态环境管理发展趋势将以水污染防治为主向水污染防治和水生态修复与保护并重发展。基于此趋势,提出遥感在水生态修复的应用潜力,利于更多地方部门积极有效应用遥感技术,解决水生态环境问题。     

基于遥感的海域环境变化监测分析

以杭州湾海域和连云港周边海域为研究对象,基于Landsat-5、Landsat-9的多光谱和热红外数据,对研究区的海域岸线和温度场信息进行提取,分析海域岸线变迁和温度分布变化特征。结果显示,研究区的海域岸线变化均较显著;海域温度在核电站运行前较为均匀,无明显温度分异,核电站运行后,因温排水排放,核电站周边海域温度出现明显分异;Landsat-9热红外数据温度反演结果可靠,可用于监测温排水对海域环境的影响。     

核电站温排水遥感监测方法研究——以田湾核电站为例

以江苏省连云港田湾核电站为主要研究区，通过热红外遥感技术研究温排水热污染现象，综合应用美国Landsat卫星热红外波段数据及地面气象测站资料，定量反演核电站建成前后附近海域水温分布与变化情况。研究结果表明，遥感技术完全能够满足温排水监测要求，对于完善近岸海域生态环境保护工作具有积极意义。     

利用TM影像监测和评价大亚湾温排水热污染

水热污染一直是环保工作中一个关注焦点,在对水热污染的日常环境监测中,往往存在测量不方便、区域评估不准等问题。如何充分利用遥感技术便捷、大范围、动态等特点对水热污染进行有效地监测和环境评价是本研究的重点。文章利用多个时相的TM数据热红外波段影像,对广州大亚湾核电站温排水水域进行了水温的反演,有效地对核电站温排水强度、扩散范围和环境影响进行了评价。研究证明,遥感技术能够有效地完成水热污染的监测和环境影响评估。     

黄岛电厂温排水对大型底栖生物群落的影响

以黄岛电厂温排水邻近海域为研究对象，2010年9月调查了电厂温排水对该海域大型底栖生物群落结构的影响。在9个站点共采集到大型底栖生物76种，平均生物量5．79 g/m2，平均密度830 m-2。利用Bray-Curtis相似性聚类对各样本大型底栖生物分析得出，调查区域可划分为4个群落。各样点Shannon-Wiener多样性指数在2．42～4．25之间，平均指数为3．67，其中靠近温排水区域站位的生物多样性呈现下降的趋势。丰度生物量比较（Abundance/biomass comparison， ABC）曲线分析结果显示，靠近排水口处的大型底栖生物群落受到一定程度的干扰。冗余分析（ RDA）结果表明，水温是影响底栖生物群落变化的最主要因子，对调查区域大型底栖生物群落变化的解释量达到60．5％，影响范围为排水口附近温升在3℃以上的区域。     

生态环境立体遥感监测"十四五"发展思路

结合当前生态环境保护总体形势和生态环境监测管理实际需求,讨论生态环境立体遥感监测"十四五"发展思路,提出构建天-空-地一体的生态环境立体遥感监测网络,建立生态环境立体遥感监测业务体系和指标体系,实施三大生态环境立体遥感监测重大工程,更好地指导当前和今后一个时期的生态环境立体遥感监测工作开展。     

湖南省生态环境遥感监测平台建设思考

简述了国内外遥感监测平台的发展现状,基于湖南省生态环境遥感监测现状进行了分析,指出遥感监测平台存在遥感监测与评估技术缺乏、监测能力薄弱以及监测网络建设不完善等问题。从平台建设架构出发,构建了数据平台,对卫星遥感数据、地面调查/监测资料、无人机航测数据进行管理、存储、分析等;业务平台,主要围绕水、气、土壤等整个生态环境监测体系开展相应的监测和管理,还可针对重点区域,环境督察等业务进行拓展;展示平台,主要是通过各种终端设备和硬件对各类业务进行可视化。提出发射独立高分遥感卫星、深化遥感监测应用研究、加强各部门协同合作等建议,以期为湖南省生态环境遥感监测平台建设与发展提供参考。     

卫星遥感环境业务化监测应用平台建设

从中国的卫星遥感技术现状出发,提出了中国的环境遥感应用不能只停留在研究水平,应根据我国环境监测的实际需要,与地面环境监测相结合,建立一套卫星遥感环境业务化监测应用平台,使遥感技术进入环境保护领域的实用化阶段。文章指出卫星遥感环境业务化监测应用平台建设主要包括卫星遥感环境业务化监测指标与监测、运行技术规范体系的建立、卫星遥感环境监测目标的确定、卫星遥感环境业务化监测目标的波谱数据库的建立、卫星遥感环境业务监测应用平台的业务内容、关键技术研究等内容,深化了我国的卫星遥感在环境领域中的应用,具有很高的实用价值。     

基于湖北省12个中小型湖泊的水环境遥感监测应用示范

以《湖北省水环境遥感监测示范系统》为数据处理平台,对2012—2014年湖北省大东湖水网、梁子湖水系和汤逊湖水系共计12个湖泊的水质类别以及营养状态级别进行遥感监测,并对比实测数据进行精度评价。结果表明:遥感监测的梁子湖、豹澥湖和严西湖水质相对较好,杨春湖、北湖和南湖水质相对较差且富营养化状况较为严重。该系统能很好地实现对水质优良达标湖泊以及富营养化湖泊的识别。对示范区域各湖泊水质类别和营养状态级别的遥感监测,基本上能满足业务化运行的需求。个别湖泊遥感监测精度较低,主要表现为遥感监测的湖泊水质类别和营养状态级别均要优于实测的结果。系统对于面积相对较大的湖泊遥感监测精度更高。     

Assessment of Allowable Thermal Load for a River Reservoir Subject to Multi-Source Thermal Discharge from Operating and Designed Beloyarsk NPP Units (South Ural,Russian Federation)

This study develops a quantitative approach to the establishment of a maximum allowable thermal discharge into a freshwater body (the Beloyarsk Reservoir) incorporated in the once-through cooling technology at the Beloyarsk nuclear power plant (NPP) (South Urals, Russian Federation). The study is based on a 3-D hydrodynamic model, embracing water circulation, heat transfer, and ice-cover formation in the Beloyarsk Reservoir. The model is driven by atmospheric forcing, river runoff, and the discharge/intake of NPP cooling water. It was used to simulate the horizontal and vertical distribution of water temperature under the effect of the operation of existing (number 3) and anticipated (numbers 4 and 5) nuclear power units. The model is validated by the comparison of the computation results with observed water temperature distribution and ice-cover configuration obtained with remote sensing techniques. The model was also used to predict the future evolution of water temperature after the launching of two new power units, which, having a common cooling system, may affect each other. It was shown that the first of the new units, no. 4, will not dramatically affect the existing thermal conditions in the reservoir, while launching one more unit, no. 5, will apparently result in overheating of the reservoir water in response to the greater volume of cooling-water discharge from the two power units. Because of a specific configuration of the recirculation flow, the reservoir may fail to cope with the dissipation of the generated heat, leading to a steady (uncontrolled) rise of water temperature in the inlet channel to one of the power units. This will reduce the potential of NPP, using the once-through cooling technology, and will most likely have an adverse effect on the survival of aquatic organisms in the Beloyarsk Reservoir. Therefore, some other environment-saving technologies must be developed for removing surplus heat from the unit no. 5 of the Beloyarsk NPP.     

内陆核设施废液零排放方式探讨

液态放射性流出物是核设施运行的必然产物,滨海核设施向大海进行稀释排放处置,内陆核设施缺少稀释载体,采用自然蒸发空气载带方式将液体流出物通过气态途径向大气稀释排放是可行的替代方案,可以实现液态流出物的零排放。自然蒸发空气载带排放方案描述了工艺原理,提出了空气流速、空气温度、环境相对湿度、废水温度等与蒸发强度的关系,给出了一套自然蒸发载带排放装置的概念设计,分析了液态流出物转为气态途径排放对环境的影响,论证了采用自然蒸发空气载带方式实现内陆核设施液态流出物零排放目标的可行性。     

Seasonal monitoring of heavy metals and physicochemical characteristics in a lentic ecosystem of subtropical industrial region, India

Assessment of seasonal changes in surface water quality is an important aspect for evaluating temporal variations of lentic ecosystem (lakes and reservoirs) pollution due to industrial effluent discharge. In this study, nine metals and 15 physicochemical parameters, collected from four sampling sites in a tropical lake receiving the discharge from thermal power plant, coal mine, and chloralkali industry, during the years from 2004 to 2005, were analyzed. For greater efficacy in monitoring of heavy metals, particle-induced X-ray emission has been used during present investigation. Different statistical techniques like analysis of variance, Pearson correlation, principal component analysis, and factor analysis were employed to evaluate the seasonal correlations of physicochemical parameters. Most of the metals and physicochemical parameters monitored in the present study exhibited high spatial and temporal variability. Pertaining to metal pollution, the most polluted site was Belwadah, i.e., waters and sediments had the highest concentration of all the relevant metals. The reference site was characterized by the presence of low concentrations of metals in waters and in sediments. Based on the high metal concentration recorded in lake ambient, drinking, bathing, and irrigation water should not be used by the local people at the effluent discharge points.     

美国核电厂辐射环境监测与信息公开及其借鉴

综述了美国核电厂辐射环境监测管理体系和环境信息公开制度及法制化管理模式,对比分析了我国辐射环境监测与信息发布实际开展情况及存在问题,提出需借鉴美国核管理委员会(NRC,以下简称NRC)的管理经验,进一步完善我国辐射环境监测标准体系,建立辐射环境监测数据公开制度,加强公众参与制度建设,明确核电厂辐射环境监测管理边界等建议。     

火电厂石灰石-石膏脱硫设施环保验收监测若干问题的探讨

以"十一五"期间较为常见的火电厂石灰石-石膏脱硫设施竣工环保验收监测为例,着重就验收过程监测布点、设施处理效率计算、污染物总量核算、减排项目标准执行以及环境管理检查中存在的问题进行探讨,提出解决问题的方法与思路,为今后火电厂竣工环保验收监测工作提供借鉴。     

A Multi-Channel Continuous Water Toxicity Monitoring System: Its Evaluation and Application to Water Discharged from a Power Plant

A multi-channel continuous water toxicity monitoring system was, after confirming the systems' performance, implemented to samples of water discharged from power plants to detect and classify their toxicity using several recombinant bioluminescent bacteria. Each channel of the system is composed of a series of two mini-bioreactors to enable a continuous operation, i.e., without system interruption due to highly toxic samples. A different recombinant bacterial strain was present in each channel: DPD2540 (fabA::lux CDABE), DPD2794 (recA::luxCDABE), and TV1061 (grpE::luxCDABE), which are induced by cell membrane-, DNA-, and protein-damaging agents, respectively. GC2 (lac::luxCDABE) is a constitutive strain, whose bioluminescence is reduced by an increase in cellular toxicity. Phenol and mitomycin C (MMC) were used for evaluating the system's performance to detect toxic chemicals. These samples were injected into the second mini-bioreactor according to a step or bell-curve manner. The field samples used in this study were obtained from the water discharged from two different power plants in Korea – from a nuclear power plant and a thermo-electronic power plant, and were injected into the second mini-bioreactor to initiate the toxicity test. Each channel showed specific bioluminescent (BL) response profiles due to the toxic compounds present in the water samples. Comparing the BL signals between the standard toxic chemical samples and discharged water samples, the equivalent toxicity of the field water could be estimated. Finally, it was proved that this novel continuous toxicity monitoring system can be used as an alternative tool for the quick monitoring and control of water quality, as well as aid in the setting up of a new monitoring strategy to protect the source of tap water and in the prevention of polluted water discharge.     

Industrial effluent quality, pollution monitoring and environmental management

Royal Commission Environmental Control Department (RC-ECD) at Yanbu industrial city in Kingdom of Saudi Arabia has established a well-defined monitoring program to control the pollution from industrial effluents. The quality of effluent from each facility is monitored round the clock. Different strategic measures have been taken by the RC-ECD to implement the zero discharge policy of RC. Industries are required to pre-treat the effluent to conform pretreatment standards before discharging to central biological treatment plant. Industries are not allowed to discharge any treated or untreated effluent in open channels. After treatment, reclaimed water must have to comply with direct discharge standards before discharge to the sea. Data of industrial wastewater collected from five major industries and central industrial wastewater treatment plant (IWTP) is summarized in this report. During 5-year period, 3,705 samples were collected and analyzed for 43,436 parameters. There were 1,377 violations from pretreatment standards from all the industries. Overall violation percentage was 3.17%. Maximum violations were recorded from one of the petrochemical plants. The results show no significant pollution due to heavy metals. Almost all heavy metals were within RC pretreatment standards. High COD and TOC indicates that major pollution was due to hydrocarbons. Typical compounds identified by GC-MS were branched alkanes, branched alkenes, aliphatic ketones, substituted thiophenes, substituted phenols, aromatics and aromatic alcohols. Quality of treated water was also in compliance with RC direct discharge standards. In order to achieve the zero discharge goal, further studies and measures are in progress.     

A combined analysis to identify airborne PM10 sources

A two step procedure that combines an air dispersion model with a receptor model was used to identify the key sources that contribute to air levels of suspended particulate matter. The contribution to PM(10) concentrations measured at four monitoring sites in San Nicolas, Argentina, of the following sources, a thermal power plant, an integrated steel mill, motor vehicle exhaust fumes, and finally dust from paved and unpaved roads, have been analysed. Moreover, an air dispersion model was used to estimate the contribution of the thermal power plant, emissions of which have been described in depth by means of hourly fuel consumption and specific emission factors. The ratio "apportionment coefficient" was introduced to relate the contribution of this source to the measured 24 h PM(10) concentrations by analysing the frequency of occurrence of connecting winds between the power plant and each monitoring site. In San Nicolas 70% of the PM(10) sampled at three of the four monitoring sites could be attributed to the power plant in those scenarios where winds connected the facility's tall point sources with the sampling locations. The contribution to the measured PM(10) levels of the rest of the sources that are present in the analysed area was confirmed by way of receptor models. For this purpose, the multielemental composition of 41 samples was determined by Wavelength Dispersive X-ray Fluorescence analysis. In order to ascertain the underlying correlations between PM(10) samples and potential sources, Principal Component Analysis was performed on the standard matrix of composition profiles, which comprises the measured PM(10) samples being enlarged with the composition profiles of the potential contributing sources. The diagonalization of the covariance matrix was used as a screening procedure to differentiate the most likely contributing sources from those that were not significant.