太原市大气颗粒物中重金属的污染特征及来源解析

为了解太原市采暖期大气颗粒物不同粒径中重金属的污染特征及其来源,于2012年10月—2013年2月对环境空气中颗粒物采样,用原子吸收分光光度法测定样品中Fe、Pb、Cu、Ni、Cr、Cd、Mn、Zn等8种元素的含量。结果表明,太原市采暖期重金属浓度从高到低依次为FePbMnZnCrCuNiCd。重金属Pb、Mn、Zn、Ni、Cd主要富集在PM2.5中;Cr主要富集在PM10中;Cu主要富集在PM5中;Fe主要在粒径大于2.5μm的粗粒子中富集。除Zn外,其他7种元素浓度均表现为灰霾期采暖期采暖前。通过主因子分析表明,太原市大气颗粒物中重金属主要来源于冶金、有机合成工业、燃煤、汽车尾气、土壤尘等。     

Characterization of As and trace metals embedded in PM10 particles in Puebla City, México

Forty-eight air-filter samples (PM₁₀) were analysed to identify the concentration level of partially leached metals (PLMs; As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and V) from Puebla City, México. Samples were collected during 2008 from four monitoring sites: (1) Tecnológico (TEC), (2) Ninfas (NIN), (3) Hermanos Serdán (HS) and (4) Agua Santa (AS). The results indicate that in TEC, As (avg. 424 ng m^?3), V (avg. 19.2 ng m^?3), Fe (avg. 1,202 ng m^?3), Cu (avg. 86.6 ng m^?3), Cr (41.9 ng m^?3) and Ni (18.6 ng m^?3) are on the higher side than other populated regions around the world. The enrichment of PLMs is due to the industrial complexes generating huge dust particles involving various operations. The results are supported by the correlation of metals (Mn, Cd and Co) with Fe indicating its anthropogenic origin and likewise, As with Cd, Co, Fe, Mn, Pb and V. The separate cluster of As, Fe and Mn clearly signifies that it is due to continuous eruption of fumaroles from the active volcano Popocatépetl in the region.     

河南省典型城市PM2.5无机元素污染特征及来源分析

分析2012年采暖季和非采暖季郑州市、洛阳市和平顶山市大气细颗粒物(PM_(2.5))样品中22种无机元素含量和污染特征,采用富集因子法、因子分析法研究当地PM_(2.5)中无机元素来源。结果表明:3个城市PM_(2.5)中无机元素总量在采暖季均高于非采暖季,不同季节占PM_(2.5)质量浓度的比例为1.7%~3.6%。Al、Na、Ca等地壳元素在PM_(2.5)中占比与PM_(2.5)浓度呈负相关关系,而Zn、Pb、Cu等人为源元素的占比随PM_(2.5)浓度增加无明显下降趋势。3个城市PM_(2.5)中Se、Cd、Br的富集因子高于1 000,Pb、Zn、Cu的富集因子为100~1 000,Co、Sc、Cr、Ni、As、Mn、Ba的富集因子为10~100,说明这些元素主要来源于人为源。13种人为源元素质量浓度在22种元素中占比为18.9%~26.3%,K、Fe、Ca、Al等4种元素占比为67.9%~76.1%。因子分析结果表明:3个城市无机元素来源组成有很大相似性,主要来源于燃煤、机动车、扬尘和建筑尘等,但Ni、Co、Sr、Ba还有来自其他排放源的贡献。     

抚顺市PM10中元素分布特征及来源分析

为了确定抚顺市PM10中元素的浓度特征及其来源,于2006—2007年的采暖季、风沙季和非采暖季在抚顺市的6个采样点采集PM10样品,并用等离子体原子发射光谱法(ICP-AES)测定样品中Ti、Al、Mn、Mg、Ca、Na、K、Cu、Zn、As、Pb、Cr、Ni、Co、Cd、Fe、V等17种元素的含量。结果表明,Al、Mg、Ca、Na、K、Mn、Fe等地壳元素在17种元素中占有较大比重,全年平均达到97.0%。富集因子分析结果表明,Cu、Zn、Pb、Cr、Co、Cd等元素在各季和各采样点明显受到人为活动影响,是典型的污染元素。主因子分析结果显示,土壤风沙尘、建筑尘、燃煤尘、道路扬尘、机动车尾气排放、金属冶炼、锰、铜、钛工业源是抚顺市PM10中元素的主要来源。     

Demonstrating PM<Subscript>2.5</Subscript> and road-side dust pollution by heavy metals along Thika superhighway in Kenya,sub-Saharan Africa

This study assessed the level of heavy metal in roadside dust and PM_2.5 mass concentrations along Thika superhighway in Kenya. Thika superhighway is one of the busiest roads in Kenya, linking Thika town with Nairobi. Triplicate road dust samples collected from 12 locations were analysed for lead (Pb), chromium (Cr), cadmium (Cd), nickel (Ni), zinc (Zn), and copper (Cu) using atomic absorption spectrophotometry (AAS). PM_2.5 samples were collected on pre-weighed Teflon filters using a BGI personal sampler and the filters were then reweighed. The ranges of metal concentrations were 39–101 μg/g for Cu, 95–262 μg/g for Zn, 9–28 μg/g for Cd, 14–24 μg/g for Ni, 13–30 μg/g for Cr, and 20–80 μg/g for Pb. The concentrations of heavy metals were generally highly correlated, indicating a common anthropogenic source of the pollutants. The results showed that the majority of the measured heavy metals were above the background concentration, and in particular, Cd, Pb, and Zn levels indicated moderate to high contamination. Though not directly comparable due to different sampling timeframes (8 h in this study and 24 h for guideline values), PM_2.5 for all sites exceeds the daily WHO PM_2.5 guidelines of 25 μg/m³. This poses a health risk to people using and working close to Thika superhighway, for example, local residents, traffic police, street vendors, and people operating small businesses. PM_2.5 levels were higher for sites closer to Nairobi which could be attributed to increased vehicular traffic towards Nairobi from Thika. This study provides some evidence of the air pollution problem arising from vehicular traffic in developing parts of the world and gives an indication of the potential health impacts. It also highlights the need for source apportionment studies to determine contributions of anthropogenic emissions to air pollution, as well as long-term sampling studies that can be used to fully understand spatiotemporal patterns in air pollution within developing regions.     

Characterization and Identification of the Sources of Chromium, Zinc, Lead, Cadmium, Nickel, Manganese and Iron in Pm10 Particulates at the Two Sites of Kolkata, India

Monitoring of ambient PM₁₀ (particulate matter which passes through a size selective impactor inlet with a 50% efficiency cut-off at 10 μm aerodynamic diameter) has been done at residential (Kasba) and industrial (Cossipore) sites of an urban region of Kolkata during November 2003 to November 2004. These sites were selected depending on the dominant anthropogenic activities. Metal constituents of atmospheric PM₁₀ deposited on glass fibre filter paper were estimated using Inductively Coupled Plasma Atomic Emission Spectrometer (ICP-AES). Chromium (Cr), zinc (Zn), lead (Pb), cadmium (Cd), nickel (Ni), manganese (Mn) and iron (Fe) are the seven toxic trace metals quantified from the measured PM₁₀ concentrations. The 24 h average concentrations of Cr, Zn, Pb, Cd, Ni, Mn and Fe from ninety PM₁₀ particulate samples of Kolkata were found to be 6.9, 506.1, 79.1, 3.3, 7.4, 2.4 and 103.6 ng/m³, respectively. The 24 h average PM₁₀ concentration exceeded national ambient air quality standard (NAAQS) as specified by central pollution control board, India at both residential (Kasba) and industrial (Cossipore) areas with mean concentration of 140.1 and 196.6 μg/m³, respectively. A simultaneous meteorology study was performed to assess the influence of air masses by wind speed, wind direction, rainfall, relative humidity and temperature. The measured toxic trace metals generally showed inverse relationship with wind speed, relative humidity and temperature. Factor analysis, a receptor modeling technique has been used for identification of the possible sources contributing to the PM₁₀. Varimax rotated factor analysis identified four possible sources of measured trace metals comprising solid waste dumping, vehicular traffic with the influence of road dust, road dust and soil dust at residential site (Kasba), while vehicular traffic with the influence of soil dust, road dust, galvanizing and electroplating industry, and tanning industry at industrial site (Cossipore).     

北京灰霾天气PM10中微量元素的分布特征

采用电感耦合等离子体质谱法(ICP-MS)对北京市2008年4月和5月不同采样点采集的灰霾天PM₁₀样品中的15种微量元素进行了分析,得出了Ti、Fe、Zn、Sn、Pb为全样样品中相对含量较高元素;Ti、Mn、Ni、Cu、Zn、Pb是水溶样样品中相对含量较高元素。与晴天相比,灰霾天样品中微量元素可溶性增强,对人体危害更严重。与2002年分析数据进行对比,因2002年缺少Cr、Cd元素的测试值,全样样品中除了Co、Ni、Cu、Mo元素外,其余测试元素的浓度均有不同程度的升高,Fe和Sn元素的增幅最大。水溶样品中,参与对比元素的含量均下降。文中对含量相对较高的Cr、Mn、Fe、Cu、Zn、Cd、Sn和Pb元素进行了源解析,分析得出采样点附近的交通源及地面扬尘是这些元素的主要来源。     

Metal concentrations in deciduous tree leaves from urban areas in Poland

Accumulation of metals in deciduous tree foliage fromurban areas in western-south Poland was monitored duringthe vegetation season of 2000 year. Concentrations of Al,Ba, Ca, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, Sr, Ti and Znwere measured in birch, willow, linden and maple leavesusing the ICP-AES method. Seasonal variations of metalconcentrations and their relations with sampling sitewere investigated. The most dynamic accumulation of Al,Cd, Cr, Ni and Pb was observed for examined species. Thehighest differences in element concentrations forinvestigated sites were found for Ba, Cd, Mn and Ni.Interelement correlations were investigated. In allfoliar samples synergistic relationships between Al–Crand Ca-Sr were found. Statistically significant negativecorrelations were observed only for Cd and Ti in birch leaves.     

Chemical composition of ambient particulate matter and redox activity

Exposure to ambient particulate matter (PM) has been associated with a number of adverse health effects. Increasing studies have suggested that such adverse health effects may derive from oxidative stress, initiated by the formation of reactive oxygen species (ROS) within affected cells. The study aimed to assess physical characteristics and chemical compositions of PM and to correlate the results to their redox activity. PM_2.5 (mass aerodynamic diameter ≤2.5 μm) and ultrafine particles (UFPs, mass media aerodynamic diameter <0.1 μm) were collected in an urban area, which had heavy traffic and represented ambient air pollution associated with vehicle exhaust. Background samples were collected in a rural area, with low traffic flow. Organic carbon (OC), elemental carbon (EC), polycyclic aromatic hydrocarbons (PAHs), and metals were analyzed. The dithiothreitol activity assay was used to measure the redox activity of PM. Results showed that UFPs have higher concentrations of OC, EC, and PAHs than those of PM_2.5. Several metals, including Fe, Cu, Zn, Ti, Pb, and Mn, were detected. Among them, Cu had the highest concentrations, followed by Fe and Zn. Organic carbon constituted 22.8% to 59.7% of the content on the surface of PM_2.5 and UFPs. Our results showed higher redox activity on a per PM mass basis for UFPs as compared to PM_2.5. Linear multivariable regression analyses showed that redox activity highly correlated with PAH concentrations and organic compounds, and insignificantly correlated with EC and metals, except soluble Fe, which increased redox activity in particle suspension due to the presence of ROS.     

Spatial distribution and potential ecologic risk assessment of heavy metals in the sediments of the Nansi Lake in China

The contamination levels and ecological risks of heavy metals in the sediments of the Nansi Lake were investigated. The contents of Cd, Cr, Cu, Pb, Zn, Ni, and Co in the surface sediments collected at 20 sites ranged from 0.08 to 1.12, 58.92 to 135.62, 38.09 to 78.65, 24.51 to 53.95, 110.51 to 235.36, 11.30 to 65.40, and 4.12 to 20.14 mg/kg, respectively. The results of partitioning analysis revealed that the proportions of soluble and exchangeable fraction were less than 1 %, the proportions of carbonate, amorphous oxides, organic matter, and crystalline oxides fraction were less than 10 %, and 10.52 % of Cd was associated with carbonate. The average proportions in the residual fraction ranged from 48.62 % for Cu to 73.76 % for Ni, indicating low mobility and bioavailability. The geoaccumulation index (I _geo), relative enrichment factor (REF), sediment pollution index (SPI), and potential effect concentration quotient (PECQ) values of the heavy metals in the sediments were not in agreement with each another. The average REF values of Cd and Zn were higher than those of other metals. However, the average PECQ values were higher for Cr and Ni than those of other metals, indicating that these two metals would cause higher adverse biological effects. Therefore, it is suggested that future management and pollution control might focus on Cd, Zn, Cr, and Ni in the sediments of the Nansi Lake.     

广州不同环境空气PM2.5中金属元素污染特征与风险评价

根据2015年广州城区磨碟沙、内陆郊区天湖和近海郊区万顷沙不同环境空气PM_2.5中金属元素（Pb、Cd、Cr、Ni、As等23种）监测数据，分析其污染特征与富集程度，并评估潜在生态风险和健康风险，为大气污染风险防控提供支持。结果显示：广州大气PM_2.5中金属K、Na、Fe、Ca、Al和Zn含量相对较高。总元素浓度总体呈冬季最高、夏季最低的特征，且随PM_2.5污染加重而升高，但总元素在PM_2.5中的占比下降。Cd、Se、Zn、Cu、Mo、Pb和Na富集严重（富集因子>100），体现了人类活动的重要影响，磨碟沙城区站富集因子通常高于另2个站点。广州大气总金属元素潜在生态危害程度为"很强"，Cd贡献为主，Pb、Cu和As元素贡献分别在天湖、磨碟沙和万顷沙位列第二。As、Cr和Mn是大气金属元素健康风险的主要贡献者；磨碟沙的总致癌效应风险高于万顷沙和天湖，但万顷沙的总非致癌效应风险最高。     

The determination of the extractability of selected elements from agricultural soil

Concentrations of Ag, Al, Ba, Cd, Co, Cr, Cu, Fe, K, Mn, Na, Ni, Pb, Sr, and Zn—isolated by sequential extraction steps from apple orchard soil—were analyzed by inductively coupled plasma-atomic emission spectroscopy and compared to the total amount of metal in soil determined by XRF. The extractable amount of each metal was calculated by the extraction yields of the four steps. The LODs of the different elements in all extracts ware below 3 μg/L except for Ba (steps 1 and 2), Cu (step 1), Fe (all steps), K (steps 1–3), Mn (step 2), Na (steps 1–3), Ni (step 1), Pb (steps 1 and 4), and Zn (steps 1 and 2). The highest LOD (>10 μg/L) was found for Fe, K, and Na (step 1). The recovery of all metals after four sequential extraction steps was 90–112%. The repeatability (<1.1%), the intermediate precision (<5.3%), the day-to-day reproducibility (<6.2%), and the overall uncertainty of measurement (approximately 4–8.5%) for all analyzed metals supports the choice of the method used.     

Heavy metal contamination of urban soils and dusts in Guangzhou, South China

The heavy metal concentrations of soil and dust samples from roadside, residential areas, parks, campus sport grounds, and commercial sites were studied in Guangzhou, South China. Heavy metals in samples were determined by inductively coupled plasma atomic emission spectrophotometer following acidic digestion with HClO₄ + HF + HNO₃. High concentrations, especially of Cd, Pb, and Zn, were found with mean concentrations of Cd, Cr, Cu, Ni, Pb, and Zn in the urban dusts being 4.22?±?1.21, 62.2?±?27.1, 116?±?30, 31.9?±?12.6, 72.6?±?17.9, and 504?±?191 mg/kg dry weight, respectively. The respective levels in urban soils (0.23?±?0.19, 22.4?±?13.8, 41.6?±?29.4, 11.1?±?5.3, 65.4?±?40.2, and 277?±?214 mg/kg dry weight, respectively), were significantly lower. The integrated pollution index of six metals varied from 0.25 to 3.4 and from 2.5 to 8.4 in urban soils and dusts, respectively, with 61 % of urban soil samples being classified as moderately to highly polluted and all dust samples being classified as highly polluted. The statistical analysis results for the urban dust showed good agreement between principal component analysis and cluster analysis, but distinctly different elemental associations and clustering patterns were observed among heavy metals in the urban soils. The results of multivariate statistic analysis indicated that Cr and Ni concentrations were mainly of natural origin, while Cd, Cu, Pb, and Zn were derived from anthropogenic activities.     

Vertical distribution of heavy metals in soil profile in a seasonally waterlogging agriculture field in Eastern Ganges Basin

The accumulation of heavy metals in soil and water is a serious concern due to their persistence and toxicity. This study investigated the vertical distribution of heavy metals, possible sources and their relation with soil texture in a soil profile from seasonally waterlogged agriculture fields of Eastern Ganges basin. Fifteen samples were collected at ～0.90-m interval during drilling of 13.11 mbgl and analysed for physical parameters (moisture content and grain size parameters: sand, silt, clay ratio) and heavy metals (Fe, Mn, Cr, Cu, Pb, Zn, Co, Ni and Cd). The average metal content was in the decreasing order of Fe?>?Mn?>?Cr?>?Zn?>?Ni?>?Cu?>?Co?>?Pb?>?Cd. Vertical distribution of Fe, Mn, Zn and Ni shows more or less similar trends, and clay zone records high concentration of heavy metals. The enrichment of heavy metals in clay zone with alkaline pH strongly implies that the heavy metal distributions in the study site are effectively regulated by soil texture and reductive dissolution of Fe and Mn oxy-hydroxides. Correlation coefficient analysis indicates that most of the metals correlate with Fe, Mn and soil texture (clay and silt). Soil quality assessment was carried out using geoaccumulation index (I _geo), enrichment factor (EF) and contamination factor (CF). The enrichment factor values were ranged between 0.66 (Mn) and 2.34 (Co) for the studied metals, and the contamination factor values varied between 0.79 (Mn) and 2.55 (Co). Results suggest that the elements such as Cu and Co are categorized as moderate to moderately severe contamination, which are further confirmed by I _geo values (0.69 for Cu and 0.78 for Co). The concentration of Ni exceeded the effects-range median values, and the biological adverse effect of this metal is 87 %. The average concentration of heavy metals was compared with published data such as concentration of heavy metals in Ganga River sediments, Ganga Delta sediments and upper continental crust (UCC), which apparently revealed that heavy metals such as Fe, Mn, Cr, Pb, Zn and Cd are influenced by the dynamic nature of flood plain deposits. Agricultural practice and domestic sewage are also influenced on the heavy metal content in the study area.     

The health hazards of potentially toxic metals in the daily diets of adults and children from a mining and smelting region (Hezhang County) in southwestern China

Toxic metals accumulated in the human body are predominantly absorbed by the digestive tract in non-occupationally exposed populations. In the current study, we collected plowed soil samples, and investigated the varied food compositions in a mining and smelting area in southwestern China, to measure the concentrations of ten potentially toxic metals—As, Ba, Cd, Cr, Cu, Mn, Ni, Pb, Sr, and Zn. We collected information on the daily intakes of these metals to assess the health risks associated with their exposure among children and adults. The urine concentrations of the metals were also measured to obtain data on the amounts present in the body. The results showed that the hazard indexes (HIs) of As, Ba, Cd, Cr, Ni, Pb, and Sr were all larger than 1, for both adults and children; the Zn and Cu values were comparatively higher in children. The intake of staple foods of the region posed the greatest health risk, while drinking water only posed risks clearly associated with As exposure. The urine samples of local residents contained larger amounts of As, Cd, Cr, Cu, Mn, Ni, Pb, and Zn, confirming the hazards in the health risk assessment. Obvious differences in the urine metal concentrations between men and women were confirmed. In conclusion, higher concentrations of metals in the surface soil and rain water were the predominant cause of elevated exposure through home-grown crops and produce to accumulate in local residents’ bodies.     

Mobility and ecological risk assessment of trace metals in polluted estuarine sediments using a sequential extraction scheme

The three-stage sequential extraction procedure for the fractionation of Cd, Cr, Cu, Ni, Pb, and Zn, proposed by the Commission of the European Communities Bureau of Reference, was applied to sediment five samples collected from the Sal estuary, Sergipe State, northeast Brazil, in September 2009. The method showed satisfactory recoveries, detection limits, and standard deviations for determinations of trace metals in the sediments. Cd and Pb were the metals most prevalent in the bioavailable fractions (carbonates, Fe and Mn oxides, organic matter, and sulfides), while Ni, Zn, Cu, and Cr showed higher percentages in the inert fraction. The order of mobility of the metals was Cd (66 %) > Pb (65 %) > Zn (59 %) > Ni (57 %) = Cr (57 %) > Cu (56 %). Possible toxicity related to these metals was examined using the risk assessment code, and by comparing the chemical data with sediment quality guideline ERL-ERM values. Results obtained using the two methods were in agreement, and showed low to medium risk for all metals, indicating that adverse effects on aquatic biota should rarely occur.     

Characterization of PM10 and PM2.5 and associated heavy metals at the crossroads and urban background site in Zabrze, Upper Silesia, Poland, during the smog episodes

The concentrations of seven heavy metals (Cd, Cr, Cu, Fe, Mn, Ni, and Pb) associated with PM10 and PM2.5 at the crossroads and the background sites have been studied in Zabrze, Poland, during smog episodes. Although the background level was unusually elevated due to both high particulate emission from the industrial and municipal sources and smog favorable meteorological conditions, significant increase of the concentration of PM2.5 and PM10 as well as associated heavy metals in the roadside air compared to the urban background has been documented. The average daily difference between the roadside and corresponding urban background aerosol concentration was equal to 39.5 μg m^???3 for PM10 and 41.2 μg m^???3 for PM2.5. The highest levels of the studied metals in Zabrze appeared for iron carried by PM10 particles: 1,706 (background) and 28,557 ng m^???3 (crossroads). The lowest concentration level (in PM10) has been found for cadmium: 7 and 77 ng m^???3 in the background and crossroads site, respectively. Also the concentrations of heavy metals carried by the fine particles (PM2.5) were very high in Zabrze during the smog episodes. Concentrations of all studied metals associated with PM10 increased at the roadside compared to the background about ten times (one order) while metals contained in PM2.5 showed two to three times elevated concentrations (except Fe—five times and Cr—no increase).     

Risk assessment of heavy metals in road and soil dusts within PM2.5, PM10 and PM100 fractions in Dongying city, Shandong Province, China

15 road and 14 soil dust samples were collected from an oilfield city, Dongying, from 11/2009-4/2010 and analyzed by inductively coupled plasma-mass spectroscopy (ICP-MS) for V, Cr, Mn, Co, Ni, Cu, Zn, As, Cd and Pb within PM(2.5), PM(10) and PM(100) fractions synchronously. Metal concentrations, sources and human health risk were studied. Results showed that both soil and road dust exhibited higher values for Mn and Zn and lower values for Co and Cd for the three fractions. Mass concentration ratios of PM(2.5)/PM(10) and PM(10)/PM(100) for metals in road and soil dust indicate that most of the heavy metals tend to concentrate in fine particles. Geoaccumulation index and enrichment factors analysis showed that Cu, Zn and Cd exhibited moderate or heavy contamination and significant enrichment, indicating the influence of anthropogenic sources. Vanadium, Cr, Mn and Co were mostly not enriched and were mainly influenced by crustal sources. For Ni, As and Pb, they ranged from not enriched to moderately enriched and were influenced by both crustal materials and anthropogenic sources. The conclusions were confirmed by multivariate analysis methods. Principle component analysis revealed that the major sources were vehicle emission, industrial activities, coal combustion, agricultural activities and crustal materials. The risk assessment results indicated that metal ingestion appeared to be the main exposure route followed by dermal contact. The most likely cause for cancer and other health risks are both the fine particles of soil and road dusts.     

Assessment of trace metal concentration in feathers of seabird (Larus dominicanus) sampled in the Florianópolis, SC, Brazilian coast

Cd, Co, Cr, Cu, Mn, Ni, Zn, and Pb were measured in feather samples of adult, subadult, and juvenile of Larus dominicanus, sampled in the Florianólis, SC, in the south of Brazil in December 2005, by flame atomic absorption spectrophotometry. The average of the distribution of Cd concentration in adult feathers (0.072 μg g^???1) was significantly different than that found in juvenile feathers (0.021 μg g^???1). Cu concentration averages were not significantly different between adults (13.30 μg g^???1), subadults (9.67 μg g^???1), and juveniles (13.76 μg g^???1). For adults and juveniles there was significant difference in feather concentrations for Cd, Co, Cr, Ni, and Pb. The distribution of Mn concentration averages in feathers differs between adults (11.36 μg g^???1) and juveniles (1.184 μg g^???1). Ni concentration averages of adults (5.92 μg g^???1) were significantly higher than those of juveniles (2.23 μg g^???1). For Pb, concentration averages were significantly higher in adults (7.53 μg g^???1) than in juveniles (1.47 μg g^???1). The concentration of Co and Cr in juvenile and subadults are statistically different when compared with the adults. In the present study, levels of Cd, Co, Cr, Mn, Ni, Zn, and Pb increased with age. The concentrations of essential trace elements in L. dominicanus were generally comparable to values reported in other studies. With non-essential metals (Cd, Pb, and Ni), in our study, L. dominicanus had lower values than those reported for their northern Atlantic counterparts.     

Atmospheric ambient trace element concentrations of PM10 at urban and sub-urban sites: source apportionment and health risk estimation

In this study, PM₁₀ concentrations and elemental (Al, Fe, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pb, and Bi) contents of particles were determined in Düzce, Turkey. The particulate matter samplings were carried out in the winter and summer seasons simultaneously in both urban and sub-urban sampling sites. The average PM₁₀ concentration measured in the winter season was 86.4 and 27.3 μg/m³, respectively, in the urban and sub-urban sampling sites, while it was measured as 53.2 and 34.7 μg/m³ in the summer season. According to the results, it was observed that the PM₁₀ levels and the element concentrations reached higher levels, especially at the urban sampling site, in the winter season. The positive matrix factorization model (PMF) was applied to the data set for source apportionment. Analysis with the PMF model revealed six factors for both the urban (coal combustion, traffic, oil combustion, industry, biomass combustion, and soil) and sub-urban (industry, oil combustion, traffic, road dust, soil resuspension, domestic heating) sampling sites. Loadings of grouped elements on these factors showed that the major sources of the elements in the atmosphere of Düzce were traffic, fossil fuel combustion, and metal industry-related emissions.