Collaborative evaluation of the analytical state-of-the-art of platinum, palladium and rhodium determinations in road dust

In order to control the quality of platinum, palladium and rhodium determinations in road dust, the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has started a project, the final aim of which is to certify a road dust reference material for its contents of platinum group elements. The first part of this project consisted of an interlaboratory study, which aimed to test the feasibility of the preparation of a candidate road dust reference material and to detect and remove most of the pitfalls observed in platinum, palladium and rhodium determinations. This paper presents the main results of this interlaboratory study carried out prior to the certification campaign. The concordance of the data obtained by the participating laboratories for the three elements was considered to reflect the state-of-the-art and was encouraging enough to decide on the organization of a certification campaign to be conducted during the year 2000. The progress made with respect to the analytical state-of-the-art for these elements will be of great benefit to the quality of measurements carried out in environmental monitoring in this particular field.     

Evaluation of the state-of-the-art of butyl- and phenyltin compound determinations in freshwater sediment prior to certification of a reference material

In order to control the quality of butyl- and phenyltin compound determinations in sediment, the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has started a project, the final aim of which is to certify a freshwater sediment for its contents of a range of organotin compounds (mono-, di- and tributyltin, and mono-, di- and triphenyltin). The first part of this project involved an interlaboratory study which aimed to test the feasibility of preparation of candidate freshwater sediment reference material and to detect and remove most of the pitfalls observed in organotin determinations. This paper presents the main results of this interlaboratory study carried out prior to the certification campaign. The agreement obtained among laboratories for the six compounds determined was considered to reflect the state-of-the-art and was encouraging enough to decide upon the organisation of a certification campaign, which will be concluded in June 1999.     

Feasibility study prior to the certification of trace elements in urban and industrial wastewater reference materials

Reliable results for the determination of trace elements in urban and industrial wastewaters are of paramount importance for both checking the performance of sewage treatment and for detecting possible urban or industrial contamination sources. The quality control of measurements should in principle rely on external tools such as certified reference materials (CRM), which should represent, as closely as possible, the matrix of samples currently analysed, e.g., in the frame of environmental monitoring. To date, however, no CRM representatives of wastewater composition are available, which limits the possibility for control laboratories to check their QC externally. To fill this gap, the European Commission's Standards, Measurements and Testing Programme (formerly BCR) has started a European collaborative project of which the aim is to test the feasibility of preparation of wastewater reference materials and the analytical state-of-the-art to enable the certification of trace elements in such matrices. This paper presents the results of the first phase of this project, namely the feasibility study and the results of an interlaboratory trial.     

Selection and evaluation of sequential extraction procedures for the determination of phosphorus forms in lake sediment

In order to achieve comparable measurements in the determination of phosphate forms in freshwater sediments, the Standards, Measurements and Testing Programme (formerly BCR) of the European Commission has launched a project the first step of which was to select and evaluate collaboratively existing extraction procedures. This was carried out through expert consultations and a literature survey, and was followed by the organisation of a first interlaboratory study for the evaluation of four sequential extraction schemes, one of which was selected as the most promising method for achieving comparability. This scheme, a modified version of the Williams protocol, was further tested in a second interlaboratory study. The so-called SMT extraction scheme seems promising and will provide, in the near future, a valuable tool for water managers in the field of lake restoration. It will be particularly helpful in estimating the stock of P potentially available, hence the risk of eutrophication due to internal P release.     

Interlaboratory trial to determine the analytical state-of-the-art of bromate determination in drinking water

The new European Directive for water intended for human consumption has established a regulatory level for bromate at 10 microg L(-1). This Maximum Admissible Concentration requires analytical methods with detection limits of a least 2.5 microg L(-1). A project funded by the Standards, Measurements and Testing Programme of the European Commission has enabled the improvement and/or development of methods for the determination of bromate at such concentration levels. This collaborative work was concluded by the organisation of an interlaboratory trial involving 26 European laboratories, which enabled the testing of both a draft ISO Standard method and alternative methods. This paper presents the results of this interlaboratory trial, along with results of a bromate stability study. The progress made with respect to the analytical state-of-the-art for bromate will greatly benefit the quality of measurements carried out in water quality monitoring.     

Improvement of the BCR three step sequential extraction procedure prior to the certification of new sediment and soil reference materials

The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission proposed a three-step sequential extraction procedure for sediment analysis, following extensive expert consultations and two interlaboratory studies. This scheme was recently used to certify the extractable trace element contents of a sediment reference material (CRM 601). Although this procedure offers a means to ensure the comparability of data in this field, some difficulties concerning the interlaboratory reproducibility still remain, and a new project is currently being conducted to determine the causes of poor reproducibility in the extraction scheme. The final objective of the project is the certification of new sediment and soil reference materials for their extractable contents of Cd, Cr, Cu, Ni, Pb and Zn. This paper presents the results of a small-scale interlaboratory study, which aimed to test a revised version of the extraction schemes by comparing the original and the modified protocols using the CRM 601 sample. This work offers an improvement to the BCR sequential extraction procedure through intercomparison exercises. This improved procedure will allow the obtaining of CRMs to validate analytical data in the analysis of soils and sediments, and it will also facilitate comparability of data in the European Union.     

微波消解电感耦合等离子体质谱法测定土壤中稀土金属元素

建立了一种电感耦合等离子体质谱测定土壤中微量稀土金属的方法.分析了土壤标准样品中的微量稀土元素,结果与标准值一致.土壤实际样品分析也得到可靠结果.该方法样品采用微波溶样,灵敏度高,是一种比较可靠的微量稀土元素分析新方法.     

Ultrasonic extraction and portable anodic stripping voltammetric measurement of lead in paint, dust wipes, soil, and air: an interlaboratory evaluation

Recent studies have demonstrated the utility of ultrasonic extraction (UE), followed by portable anodic stripping voltammetry (ASV), for the on-site determination of lead in environmental and industrial hygiene samples. The aim of this work was to conduct an interlaboratory evaluation of the UE-ASV procedure, with a goal of establishing estimates of method performance based on results from collaborative interlaboratory analysis. In this investigation, performance evaluation materials (PEMs) with characterized lead concentrations were used for interlaboratory testing of the UE-ASV procedure. The UE-ASV protocol examined has been promulgated in the form of two separate national voluntary consensus standards (one for UE and another for electroanalysis, which includes ASV). The PEMs consisted of characterized and homogenized paints, soils, and dusts (the last of which were spiked onto wipes meeting national voluntary consensus standard specifications), and air filter samples (mixed cellulose ester membrane) generated using characterized paints within an aerosol chamber. The lead concentrations within the PEMs were chosen so as to bracket pertinent action levels for lead in the various sample matrices. The interlaboratory evaluation was conducted so as to comply with an applicable national voluntary consensus standard that can be used to estimate the interlaboratory precision of a given analytical test method. Based on the analytical results reported by the participating laboratories, relative standard deviations (RSDs) for repeatability and reproducibility were computed for three different lead contents of the four PEMs. RSDs for repeatability were 0.019-0.100 for paints; 0.030-0.151 for soils; 0.085-0.134 for dust wipes; and 0.095-0.137 for air filters. RSDs for reproducibility were 0.127-0.213 for paints; 0.062-0.162 for soils; 0.085-0.134 for dust wipes; and 0.114-0.220 for air filters. With the exception of one of the air filter samples and one of the paint samples, the precision estimates were within the +/- 20% precision requirement specified in the US Environmental Protection Agency National Lead Laboratory Accreditation Program (NLLAP). The results of this investigation illustrate that the UE-ASV procedure is an effective method for the quantitative measurement of lead in the matrices evaluated in this study.     

A new mussel certified reference material (CRM 477) for the quality control of butyltin determination in the marine environment

The analytical techniques used for the determination of butyltin compounds in biological tissues are generally based on a succession of steps (e.g., extraction, derivatization, separation, detection) which are all prone to systematic errors. An interlaboratory programme performed at the EU level and based on a stepwise approach has enabled one to identify and remove most of these errors and to improve considerably the state of the art so that certification of a mussel reference material has been made possible. This paper describes the preparation of this mussel reference material containing monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT), the homogeneity and stability studies and the analytical work performed for the certification of the contents of MBT [Sn(C4H9)3+], DBT [Sn(C4H9)2(2+)] and TBT [Sn(C4H9)3+]. The results obtained by a group of expert EU laboratories are discussed along with the methods used to certify the mass fractions (based on dry mass) of monobutyltin (1.50 +/- 0.28 mg kg-1 as MBT cations), dibutyltin (1.54 +/- 0.12 mg kg-1 as DBT cations) and tributyltin (2.20 +/- 0.19 mg kg-1 as TBT cations). The paper also describes an attempt to certify the content of triphenyltin in this material which, although reasonable agreement was found among the participants' results, failed owing to the instability of this compound. This new material will be of great support to ensure the quality control of butyltin determination in shellfish, as carried out in environmental monitoring programmes.     

Interlaboratory evaluation of an extraction and fluorescence method for the determination of trace beryllium in soils

Analytical methods for the determination of trace beryllium in soils are needed so that anthropogenic sources of this element can be distinguished from native (background) levels of beryllium. In this work, a collaborative interlaboratory evaluation of a new extraction and fluorescence-based procedure for determining beryllium in soil samples was carried out to fulfil method validation requirements for ASTM International voluntary consensus standard test methods. A Canadian reference material, CCRMP Till-1 soil, with a background beryllium concentration of 2.4 microg g(-1), was selected for study. This certified reference material (CRM) was spiked and homogenized with varying levels of beryllium oxide in order to give batches of material with beryllium concentrations of 4.36 +/- 0.69, 11.5 +/- 0.7, 124 +/- 7 and 246 +/- 16 microg g(-1) (+/- values are standard deviations). In the interlaboratory study (ILS), which was carried out in accordance with an applicable ASTM International standard practice (ASTM E691), samples of these spiked soils were subjected to extraction in dilute ammonium bifluoride at approximately 90 degrees C for 40 h. Fluorescence measurement of the extracted beryllium was carried out via detection using the high quantum yield fluorophore, hydroxybenzoquinoline sulfonate (HBQS). Interlaboratory precision estimates from six participating laboratories ranged from 0.048 to 0.103 (relative standard deviations) for the five different beryllium concentrations. Pooled bias estimates resulting from this ILS were between -0.049 and 0.177 for the various beryllium levels. These figures of merit support promulgation of the analytical procedure as an ASTM International standard test method.     

Validation of a European standard for the determination of hexavalent chromium in solid material

A European standard for the determination of Cr(vi) in solid material has been elaborated in the framework of an international co-operation and finally validated in the course of an interlaboratory comparison. The procedure is based on the alkaline digestion prescribed by EPA method 3060A followed by ion chromatography and determines an operationally defined content of Cr(vi), including water-soluble and insoluble chromates. A preliminary robustness study was carried out in order to compare different extraction methodologies and to study the equivalency of different analytical methods for the determination of Cr(vi) in alkaline extracts of soil and waste materials. During an interlaboratory validation trial with 19 European laboratories a set of 4 samples (2 soil and 2 waste samples) was analysed to determine performance characteristics for different combinations of digestion and detection methods. With the procedures prescribed by the new European standard (EN 15192) acceptable results were obtained for both soil samples and one of the waste samples (sludge). However, for the second waste sample (fly ash) a large deviation in analytical results was observed. This indicates that particularly for waste materials a possible occurrence of strong matrix effects has to be considered and supplementary quality control data are needed in order to assess the validity of analytical results. The accuracy of the determination of Cr(vi) in solid matrices remains a challenging field in terms of maximum extraction efficiency and minimum species interconversion.     

Homogeneity and stability study of the candidate reference material Adamussium colbecki for trace elements

The preparation of a new candidate certified reference material (CRM) for trace elements based on the antarctic bivalve Adamussium colbecki(IRMM 813) was carried out by the Istituto Superiore di Sanità(ISS, Rome, Italy) in cooperation with the Institute for Reference Materials and Measurements, Joint Research Centre of the European Commission (EC-JRC-IRMM), in the frame of the Italian National Programme of Research in Antarctica (Programma Nazionale di Ricerca in Antartide, PNRA). Samples were collected at Terra Nova Bay (Ross Sea) during the 2000-2001 expedition in Antarctica. The preparation of a material suitable for certification was performed by the EC-JRC-IRMM. Measurements for homogeneity and short-term stability tests were carried out by ISS. The elements selected for the certification project were As, Cd, Cu, Cr, Fe, Mn, Ni and Zn. For the above-mentioned tests, the determination of the elements of interest was performed on samples mineralised by microwave-assisted acid digestion. The analytical techniques employed to this end were inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma dynamic reaction cell quadrupole mass spectrometry (ICP-DRC-Q-MS). The candidate material was shown to be fit for purpose with regard to homogeneity and short-term stability, thus allowing the following phases of the certification project to be undertaken, in the first place the selection of expert laboratories for the accomplishment of the certification campaign.     

Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Fractionation of traffic-emitted Ce, La and Zr in road dusts

The introduction of catalytic converters has led to a new environmental problem since catalysts emit platinum group elements (PGEs) which are among the least distributed elements in nature. Along with PGEs the vehicle exhaust catalysts contain also a number of stabilizers, commonly oxides of rare earth elements and alkaline earth elements such as Ce, La and Zr. Since vehicular emission of these elements has received little attention so far this work attempts to offer insight into their distribution and fate in the environment by measuring their speciation in road dust samples collected along several highways in Germany and a city centre (Saarbrücken). Speciation of the elements (fractionation into associated mineralogical phases) was carried out via a conventional sequential extraction protocol and the complexing abilities of humic substances in the organic matter were investigated by selective extraction methods in combination with size segregation. For evaluation purposes soil samples spiked with catalytic converter material were analyzed, showing a much lower fraction of Ce, La and Zr mobilized in comparison to the road dust samples. It was found that the elements were effectively bound to humic substances in road dust with a preference for complexation with low molecular weight compounds (<1600 Da).     

胜利电厂一期工程环境影响回顾评价——污染源和污染治理措施回顾评价

本文论述了胜利电厂污染源和污染治理措施回顾评价的方法和内容。回顾评价采用现场调查，与一期环评报告进行对比分析的方法进行，重点放在污染源、污染治理措施的调查分析上。     

美国环境监测一百年历史回顾及其借鉴

环境监测是从上世纪末由英美等发达国家首先开展的，至今有一百多年历史。美国科学技术高度发达，其环境监测水平也领先于其他国家。因此从某种意义上说，美国环境监测一百年的历程、作法和经验，在全世界范围内都具有一定的代表性。它基本上可反映出发达国家环境监测走过的普遍道路，并一定程度上也预示其他国家环境监测的发展方向。尤其是它的一些科学思路，成功的做法，先进技术（采样、前处理及分析测定技术），高水平的标准方法     

Photodegradation of Pyrimethanil induced by iron(III) in aqueous solutions

In this study an abiotic process was suggested to evaluate the behaviour of Pyrimethanil (antibotrytic fungicide) in real matrices. This process consists of a photodegradation of the fungicide carried out in the presence of iron(III) in three types of buffer; acetate, phosphate and citrate. The experimental results show that the nature of buffered solutions influences both the rate of disappearance of Pyrimethanil and, in the case of citrate, also the kind of by-products formed during the photodegradation process. For each case examined, the breakdown products were identified by using liquid chromatography (LC) or gas chromatography (GC), coupled with mass spectrometry (MS). The degradation pathways of the fungicide were proposed and the relative kinetic constants were evaluated. The abiotic photodegradation process shows the possibility of different pathways for Pyrimethanil degradation in environmental matrices such as the soil, plants and foodstuffs, where iron (free and/or bonded) is a natural component.     

Magnetic susceptibility measurements as proxy method to monitor soil pollution: the case study of S. Nicola di Melfi

The development of in situ, cheep, noninvasive, and fast strategies for soil monitoring is a crucial task for environmental research. In this paper, we present the results of three field surveys carried out in an industrial area of Southern Italy: S. Nicola di Melfi. The monitoring procedure is based on soil magnetic susceptibility measurements carried out by means of experimental protocols that our research group developed during the last years. This field surveys is supported by both geological characterization of the area and analytical determinations of metal concentrations in soils. Magnetic studies were carried out not only in situ but also in laboratory. Results show that, taking into account the influence due to the geomorphologic difference, soil magnetic susceptibility is an optimal indicator of the anthropogenic impact. So, our monitoring strategy discloses that the combined use of magnetic susceptibility measurements and soil geomorphology information may be used as a useful tool for the temporal monitoring of pollution evolution and for a fast screening of polluted zones.     

Increasing utilisation efficiency of ferric chloride etchant in industrial photochemical machining

The environmental effects of photochemical machining (PCM) can be appreciable in view of the nature of the industry whereby various chemicals are used in the preparation and cleaning of metal surfaces, photographic processing of phototooling, coating and selective removal (development) of photoresists, etching through apertures in the resist stencils and stripping of resist after etching. This paper concerns the environmental impact of ferric chloride, the most commonly used etchant in PCM, and is believed to be the first quantitative analysis for the PCM industry. The findings showed that more than half of the PCM companies used regeneration of ferric chloride etchant and 76.3% of companies were prepared to use a more environment-friendly regeneration system at a higher overall cost. Regarding ferric chloride consumption, it was found that the performance of companies varies greatly: companies using regeneration were, on average, nearly seven times (340.8% compared with 51.1%) more efficient than those that do not regenerate, and the most efficient company used 135 times less etchant than the least efficient company. The findings of this study and the analysis carried out can be used by PCM companies as a benchmark in assessing their environmental performance with respect to etchant consumption efficiency.     

通过建设项目环保验收监测对环评工作的建议

环评报告是建设项目开展环保验收工作的重要依据。环保验收工作中必须对照环评报告的内容及要求进行调查和监测。由于环评报告中工程内容、环保措施、评价因子等内容不够完善,使得工程建设中措施无法完全落实,造成环保验收工作不能顺利进行。本文通过对环保验收监测中遇到的实例进行分析,为更好的开展环评及验收监测工作提供建议。