Interlaboratory evaluation of trace element determination in workplace air filter samples by inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) is becoming more widely used for trace elemental analysis in the occupational hygiene field, and consequently new ICP-MS international standard procedures have been promulgated by ASTM International and ISO. However, there is a dearth of interlaboratory performance data for this analytical methodology. In an effort to fill this data void, an interlaboratory evaluation of ICP-MS for determining trace elements in workplace air samples was conducted, towards fulfillment of method validation requirements for international voluntary consensus standard test methods. The study was performed in accordance with applicable statistical procedures for investigating interlaboratory precision. The evaluation was carried out using certified 37-mm diameter mixed-cellulose ester (MCE) filters that were fortified with 21 elements of concern in occupational hygiene. Elements were spiked at levels ranging from 0.025 to 10 μg filter(-1), with three different filter loadings denoted "Low", "Medium" and "High". Participating laboratories were recruited from a pool of over fifty invitees; ultimately twenty laboratories from Europe, North America and Asia submitted results. Triplicates of each certified filter with elemental contents at three different levels, plus media blanks spiked with reagent, were conveyed to each volunteer laboratory. Each participant was also provided a copy of the test method which each participant was asked to follow; spiking levels were unknown to the participants. The laboratories were requested to prepare the filters by one of three sample preparation procedures, i.e., hotplate digestion, microwave digestion or hot block extraction, which were described in the test method. Participants were then asked to analyze aliquots of the prepared samples by ICP-MS, and to report their data in units of μg filter(-1). Most interlaboratory precision estimates were acceptable for medium- and high-level spikes (RSD <25%), but generally yielded greater uncertainties than were anticipated at the outset of the study.     

Ultrasonic extraction and portable anodic stripping voltammetric measurement of lead in paint, dust wipes, soil, and air: an interlaboratory evaluation

Recent studies have demonstrated the utility of ultrasonic extraction (UE), followed by portable anodic stripping voltammetry (ASV), for the on-site determination of lead in environmental and industrial hygiene samples. The aim of this work was to conduct an interlaboratory evaluation of the UE-ASV procedure, with a goal of establishing estimates of method performance based on results from collaborative interlaboratory analysis. In this investigation, performance evaluation materials (PEMs) with characterized lead concentrations were used for interlaboratory testing of the UE-ASV procedure. The UE-ASV protocol examined has been promulgated in the form of two separate national voluntary consensus standards (one for UE and another for electroanalysis, which includes ASV). The PEMs consisted of characterized and homogenized paints, soils, and dusts (the last of which were spiked onto wipes meeting national voluntary consensus standard specifications), and air filter samples (mixed cellulose ester membrane) generated using characterized paints within an aerosol chamber. The lead concentrations within the PEMs were chosen so as to bracket pertinent action levels for lead in the various sample matrices. The interlaboratory evaluation was conducted so as to comply with an applicable national voluntary consensus standard that can be used to estimate the interlaboratory precision of a given analytical test method. Based on the analytical results reported by the participating laboratories, relative standard deviations (RSDs) for repeatability and reproducibility were computed for three different lead contents of the four PEMs. RSDs for repeatability were 0.019-0.100 for paints; 0.030-0.151 for soils; 0.085-0.134 for dust wipes; and 0.095-0.137 for air filters. RSDs for reproducibility were 0.127-0.213 for paints; 0.062-0.162 for soils; 0.085-0.134 for dust wipes; and 0.114-0.220 for air filters. With the exception of one of the air filter samples and one of the paint samples, the precision estimates were within the +/- 20% precision requirement specified in the US Environmental Protection Agency National Lead Laboratory Accreditation Program (NLLAP). The results of this investigation illustrate that the UE-ASV procedure is an effective method for the quantitative measurement of lead in the matrices evaluated in this study.     

Validation of a standardized portable fluorescence method for determining trace beryllium in workplace air and wipe samples

Beryllium is widely used in industry for its unique properties; however, occupational exposure to beryllium particles can cause potentially fatal disease. Consequently, exposure limits for beryllium particles in air and action levels on surfaces have been established to reduce exposure risks for workers. Field-portable monitoring methods for beryllium are desired in order to facilitate on-site measurement of beryllium in the workplace, so that immediate action can be taken to protect human health. In this work, a standardized, portable fluorescence method for the determination of trace beryllium in workplace samples, i.e., air filters and dust wipes, was validated through intra- and inter-laboratory testing. The procedure entails extraction of beryllium in 1% ammonium bifluoride (NH(4)HF(2), aqueous), followed by fluorescence measurement of the complex formed between beryllium ion and hydroxybenzoquinoline sulfonate (HBQS). The method detection limit was estimated to be less than 0.02 microg Be per air filter or wipe sample, with a dynamic range up to greater than 10 microg. The overall method accuracy was shown to satisfy the accuracy criterion (A< or = +/-25%) for analytical methods promulgated by the US National Institute for Occupational Safety and Health (NIOSH). Interferences from numerous metals tested (in >400-fold excess concentration compared to that of beryllium) were negligible or minimal. The procedure was shown to be effective for the dissolution and quantitative detection of beryllium extracted from refractory beryllium oxide particles. An American Society for Testing and Materials (ASTM) International voluntary consensus standard based on the methodology has recently been published.     

Preparation, certification and interlaboratory analysis of workplace air filters spiked with high-fired beryllium oxide

Occupational sampling and analysis for multiple elements is generally approached using various approved methods from authoritative government sources such as the National Institute for Occupational Safety and Health (NIOSH), the Occupational Safety and Health Administration (OSHA) and the Environmental Protection Agency (EPA), as well as consensus standards bodies such as ASTM International. The constituents of a sample can exist as unidentified compounds requiring sample preparation to be chosen appropriately, as in the case of beryllium in the form of beryllium oxide (BeO). An interlaboratory study was performed to collect analytical data from volunteer laboratories to examine the effectiveness of methods currently in use for preparation and analysis of samples containing calcined BeO powder. NIST SRM(?) 1877 high-fired BeO powder (1100 to 1200 °C calcining temperature; count median primary particle diameter 0.12 μm) was used to spike air filter media as a representative form of beryllium particulate matter present in workplace sampling that is known to be resistant to dissolution. The BeO powder standard reference material was gravimetrically prepared in a suspension and deposited onto 37 mm mixed cellulose ester air filters at five different levels between 0.5 μg and 25 μg of Be (as BeO). Sample sets consisting of five BeO-spiked filters (in duplicate) and two blank filters, for a total of twelve unique air filter samples per set, were submitted as blind samples to each of 27 participating laboratories. Participants were instructed to follow their current process for sample preparation and utilize their normal analytical methods for processing samples containing substances of this nature. Laboratories using more than one sample preparation and analysis method were provided with more than one sample set. Results from 34 data sets ultimately received from the 27 volunteer laboratories were subjected to applicable statistical analyses. The observed performance data show that sample preparations using nitric acid alone, or combinations of nitric and hydrochloric acids, are not effective for complete extraction of Be from the SRM 1877 refractory BeO particulate matter spiked on air filters; but that effective recovery can be achieved by using sample preparation procedures utilizing either sulfuric or hydrofluoric acid, or by using methodologies involving ammonium bifluoride with heating. Laboratories responsible for quantitative determination of Be in workplace samples that may contain high-fired BeO should use quality assurance schemes that include BeO-spiked sampling media, rather than solely media spiked with soluble Be compounds, and should ensure that methods capable of quantitative digestion of Be from the actual material present are used.     

加速溶剂萃取-气相色谱/串联质谱法测定土壤中20种有机氯农药

建立了用加速溶剂萃取法（ASE）提取、气相色谱-串联质谱法分析土壤中20种有机氯农药的方法。用正己烷和丙酮（1∶1,V/V）的混合溶剂为提取剂,萃取温度100℃,压力1 500 psi,静态提取10 min,循环提取2次,提取液经石墨化碳黑固相萃取柱净化,浓缩后进行GC-MS/MS测定,外标法定量。试验结果表明,采用串联质谱多反应监测模式,降低了背景干扰,当取5 g土壤时,有机氯农药的检出限在0.1~3.0μg/kg之间,低浓度水平（8μg/kg）的基体加标回收率为70.3%~134%,相对标准偏差〈23%。测定方法背景干扰低,灵敏度高,适合土壤中20种有机氯农药残留的同时测定。     

Interlaboratory trial to determine the analytical state-of-the-art of bromate determination in drinking water

The new European Directive for water intended for human consumption has established a regulatory level for bromate at 10 microg L(-1). This Maximum Admissible Concentration requires analytical methods with detection limits of a least 2.5 microg L(-1). A project funded by the Standards, Measurements and Testing Programme of the European Commission has enabled the improvement and/or development of methods for the determination of bromate at such concentration levels. This collaborative work was concluded by the organisation of an interlaboratory trial involving 26 European laboratories, which enabled the testing of both a draft ISO Standard method and alternative methods. This paper presents the results of this interlaboratory trial, along with results of a bromate stability study. The progress made with respect to the analytical state-of-the-art for bromate will greatly benefit the quality of measurements carried out in water quality monitoring.     

Addressing analytical uncertainties in the determination of trichloroacetic acid in soil

Soil is an important compartment in the environmental cycling of trichloroacetic acid (TCA), but soil TCA concentration is a methodologically defined quantity; analytical methods either quantify TCA in an aqueous extract of the soil, or thermally decarboxylate TCA to chloroform in the whole soil sample. The former may underestimate the total soil TCA, whereas the latter may overestimate TCA if other soil components (e.g. humic material) liberate chloroform under the decarboxylation conditions. The aim of this work was to show that extraction and decarboxylation methods yield different TCA concentrations because the decarboxylation method can also determine "bound" TCA. Experiments with commercial humic acid solutions showed there was no additional chloroform formation under decarboxylation conditions, and that all TCA in a TCA-humic acid mixture could be quantitatively determined (108 +/- 13%). Anion exchange resin was used as a provider of solid-phase TCA binding; only 5 +/- 1% of a TCA solution mixed with the resin was present in the aqueous extract subsequently separated from the resin, yet the decarboxylation method yielded mass balance (123 +/- 22%) with TCA remaining in the resin. In aqueous extraction of a range of soil samples (with or without added TCA spike), the decarboxylation method was able to satisfactorily account for TCA in the extractant + residue post-extraction, compared with whole-soil TCA (+ spike) pre-extraction: e.g. mass balances for unspiked soil from Sikta spruce and larch forest were 99 +/- 8% and 93 +/- 6%, respectively, and for TCA-spiked forest and agricultural soils were 114 +/- 13% and 102 +/- 2%. In each case recovery of TCA in the extractant was substantially less than 100%(<20% for unspiked soils, <55% for spiked soils). Extraction efficiencies were generally lower in more organic soils. The results suggest that analytical methods which utilise aqueous extraction may underestimate whole-soil TCA concentrations. Application of both methodologies together may enhance insight into TCA behaviour in soil.     

Uptake and bioavailability of persistent organic pollutants by plants grown in contaminated soil

This paper assesses the uptake of persistent organic pollutants (POP's) into plants. In particular, uptake of alpha-endosulfan, beta-endosulfan and endosulfan sulfate from lettuce. The lettuce plants were grown on compost that had previously been contaminated at 10 and 50 microg g(-1) per POP. The soil was slurry spiked by adding the appropriate amount of POP in acetone in an approximate ratio of 1 ratio 2, w/v soil ratio solvent. The solvent was left to evaporate at ambient temperature for 24 hours. Lettuce plants were grown under artificial daylight for 12 hours a day. The influence of soil ageing on the recovery of POP's from spiked soil samples was also assessed. The average recovery of endosulfan compounds from slurry spiked soil (10, 20 and 40 microg g(-1)) was consistent (92.9 +/- 4.4% for n= 9). However, ageing of endosulfan compounds on the slurry spiked soil resulted in lower recoveries (average losses were 12.5% after 14 days ageing of slurry spiked soil). The uptake of POP's was assessed by measuring the amount of endosulfan compounds in roots and leaves from lettuce plants after 10, 20 and 33 days. In addition, control plants grown in uncontaminated soil were monitored and analysed. It was found that endosulfan compounds were present in the roots of all lettuce plants irrespective of soil spike level or age of plant. In the 33 day lettuce plants where the soil was spiked at the highest level (50 microg g(-1)) endosulfan compounds were determined in the leaves. The root to leaf ratio was found to be 3.1 for alpha-endosulfan, 46.0 for beta-endosulfan, and 24.3 for endosulfan sulfate. Spiked lettuce samples were subjected to in vitro gastrointestinal extraction to assess the bioavailability of endosulfan compounds. No detectable endosulfan compounds were determined in the gastric extracts while small quantities (range 0.06-0.12 microg g(-1)) were found in the intestinal extraction. All samples (soil and lettuce) were extracted using pressurised fluid extraction and analysed using gas chromatography with mass selective detection.     

Beryllium natural background concentration and mobility: a reappraisal examining the case of high Be-bearing pyroclastic rocks

Beryllium is widely distributed in soils at low levels, but it can also occur naturally in higher concentrations in a variety of materials exploited for many industrial applications. Beryllium is also one of the most toxic natural elements and is known to be a human carcinogen. A concise account of the literature data on baseline concentrations of Be in soils illustrates the possibility of worldwide presence of areas with a high natural background concentration of Be (up to 300 mg/kg), the crustal abundance of which is generally estimated to be in the range 2–6 mg/kg. Nevertheless, the number of available data is rather limited in comparison with those about other toxic elements such as Pb, Cd and Cr. This has probably caused the choice of low values of concentration level as the reference for the definition of soil contamination: these values are not always realistic and are not applicable to large areas. As a case study, we report and analyse a diffuse, unusually high (up to 80 mg/kg, average approximately 20 mg/kg), natural occurrence of beryllium in loose and poorly consolidated pyroclastic layers related to the Pleistocene activity of the Vico volcano. Additionally, the analysis of Be leachability has been carried out, providing evidence of a not negligible mobility in contrast with the scarce data presented in the literature that usually indicate beryllium as an element with low mobility in oxidising surface environmental conditions. This research marks the beginning of a possible reappraisal of beryllium geochemical behaviour and background levels, providing more realistic reference values for risk assessment and land management.     

A new mussel certified reference material (CRM 477) for the quality control of butyltin determination in the marine environment

The analytical techniques used for the determination of butyltin compounds in biological tissues are generally based on a succession of steps (e.g., extraction, derivatization, separation, detection) which are all prone to systematic errors. An interlaboratory programme performed at the EU level and based on a stepwise approach has enabled one to identify and remove most of these errors and to improve considerably the state of the art so that certification of a mussel reference material has been made possible. This paper describes the preparation of this mussel reference material containing monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT), the homogeneity and stability studies and the analytical work performed for the certification of the contents of MBT [Sn(C4H9)3+], DBT [Sn(C4H9)2(2+)] and TBT [Sn(C4H9)3+]. The results obtained by a group of expert EU laboratories are discussed along with the methods used to certify the mass fractions (based on dry mass) of monobutyltin (1.50 +/- 0.28 mg kg-1 as MBT cations), dibutyltin (1.54 +/- 0.12 mg kg-1 as DBT cations) and tributyltin (2.20 +/- 0.19 mg kg-1 as TBT cations). The paper also describes an attempt to certify the content of triphenyltin in this material which, although reasonable agreement was found among the participants' results, failed owing to the instability of this compound. This new material will be of great support to ensure the quality control of butyltin determination in shellfish, as carried out in environmental monitoring programmes.     

Preparation and utilization of molecularly imprinted polymer for chlorsulfuron extraction from water, soil, and wheat plant

A molecularly imprinted polymer (MIP) was prepared using chlorsulfuron (CS), a herbicide as a template molecule, methacrylic acid as a functional monomer, ethylene glycol dimethacrylate (EDMA) as a cross-linker, methanol and toluene as a porogen, and 2,2-azobisisobutyronitrile as an initiator. The binding behaviors of the template chlorsulfuron and its analog on MIP were evaluated by equilibrium adsorption experiments, which showed that the MIP particles had specific affinity for the template CS. Solid-phase extraction (SPE) with the chlorsulfuron molecularly imprinted polymer as an adsorbent was investigated. The optimum loading, washing, and eluting conditions for chlorsulfuron molecularly imprinted polymer solid-phase extraction (CS-MISPE) were established. The optimized CS-MISPE procedure was developed to enrich and clean up the chlorsulfuron residue in water, soils, and wheat plants. Concentrations of chlorsulfuron in the samples were analyzed by HPLC-UVD. The average recoveries of CS spiked standard at 0.05~0.2 mg L(-1) in water were 90.2~93.3%, with the relative standard deviation (RSD) being 2.0~3.9% (n=3). The average recoveries of 1.0 mL CS spiked standard at 0.1~0.5 mg L(-1) in 10 g soil were 91.1~94.7%, with the RSD being 3.1~5.6% (n=3). The average recoveries of 1.0 mL CS spiked standard at 0.1~0.5 mg L(-1) in 5 g wheat plant were 82.3~94.3%, with the RSD being 2.9~6.8% (n=3). Overall, our study provides a sensitive and cost-effective method for accurate determination of CS residues in water, soils, and plants.     

固相萃取-超高效液相色谱-串联质谱法同时测定地表水中9种性激素

建立了地表水中9种性激素的固相萃取-超高效液相色谱-串联质谱检测方法。利用HLB固相萃取柱富集水体中痕量性激素,用甲醇洗脱并浓缩,再以1 mmol/L氟化铵-乙腈为流动相,经C_(18)柱分离,采用电喷雾离子源、质谱多反应监测模式,内标法定量,实现了地表水中9种性激素的同时检测。方法检出限为0. 1～1. 8 ng/L,在低、中、高3个加标水平下,性激素的平均回收率为69. 6%～115. 0%,相对标准偏差为3. 2%～17. 7%。该方法灵敏度高,定性准确,操作简单高效,适用于地表水中9种性激素的定性定量分析。     

Chemical and bioassay monitoring of PCB-contaminated soil remediation using solvent extraction technology

Illegal dumping of polychlorinated biphenyl (PCB) capacitors was discovered in Kobe, Japan, in 2001, leaving about 68 m(3) (92 tons) of soil contaminated with approximately 6.6 kg of PCBs. Solvent extraction technology carried out in 2002-2003 using isopropyl alcohol remedied the affected soil at the site. Forty-seven batch treatments were conducted during full-scale treatment. On average, 8.4 extraction cycles per batch were needed to achieve the clean-up goal for PCBs (i.e., the Japanese environmental quality standard for soil). Analytical results showed that the average PCB concentration (88 microg g(-1)-dry soil) in untreated soil samples of all the batches was decreased to 1.2 microg g(-1)-dry soil in treated soil samples, yielding a removal efficiency of 98.6%. Dioxin responsive-chemical activated luciferase gene expression assay (DR-CALUX) and enzyme-linked immunosorbent assay (ELISA) adopting a monoclonal antibody against 2,3',4,4',5-pentachlorobiphenyl (PCB #118) were used to rapidly screen soil samples before and after solvent extraction. The DR-CALUX and ELISA results were in good agreement with World Health Organization toxicity equivalent values and analytically determined PCB concentrations, respectively. Regular monitoring during the treatment period confirmed that the applied technology met Japanese environmental and control regulations concerning treatment and disposal of contaminated soils and treatment residues. After full-scale treatment, the amount of PCBs recovered from the solvent purification system approximated the estimated amount of PCBs spilled.     

Improvement of the BCR three step sequential extraction procedure prior to the certification of new sediment and soil reference materials

The Standards, Measurements and Testing Programme (formerly BCR) of the European Commission proposed a three-step sequential extraction procedure for sediment analysis, following extensive expert consultations and two interlaboratory studies. This scheme was recently used to certify the extractable trace element contents of a sediment reference material (CRM 601). Although this procedure offers a means to ensure the comparability of data in this field, some difficulties concerning the interlaboratory reproducibility still remain, and a new project is currently being conducted to determine the causes of poor reproducibility in the extraction scheme. The final objective of the project is the certification of new sediment and soil reference materials for their extractable contents of Cd, Cr, Cu, Ni, Pb and Zn. This paper presents the results of a small-scale interlaboratory study, which aimed to test a revised version of the extraction schemes by comparing the original and the modified protocols using the CRM 601 sample. This work offers an improvement to the BCR sequential extraction procedure through intercomparison exercises. This improved procedure will allow the obtaining of CRMs to validate analytical data in the analysis of soils and sediments, and it will also facilitate comparability of data in the European Union.     

Validation of a European standard for the determination of hexavalent chromium in solid material

A European standard for the determination of Cr(vi) in solid material has been elaborated in the framework of an international co-operation and finally validated in the course of an interlaboratory comparison. The procedure is based on the alkaline digestion prescribed by EPA method 3060A followed by ion chromatography and determines an operationally defined content of Cr(vi), including water-soluble and insoluble chromates. A preliminary robustness study was carried out in order to compare different extraction methodologies and to study the equivalency of different analytical methods for the determination of Cr(vi) in alkaline extracts of soil and waste materials. During an interlaboratory validation trial with 19 European laboratories a set of 4 samples (2 soil and 2 waste samples) was analysed to determine performance characteristics for different combinations of digestion and detection methods. With the procedures prescribed by the new European standard (EN 15192) acceptable results were obtained for both soil samples and one of the waste samples (sludge). However, for the second waste sample (fly ash) a large deviation in analytical results was observed. This indicates that particularly for waste materials a possible occurrence of strong matrix effects has to be considered and supplementary quality control data are needed in order to assess the validity of analytical results. The accuracy of the determination of Cr(vi) in solid matrices remains a challenging field in terms of maximum extraction efficiency and minimum species interconversion.     

加速溶剂萃取-凝胶净化色谱-气相色谱质谱法测定农用地土壤中有机氯农药方法研究

通过对加速溶剂萃取、平行蒸发及净化方法等环节的优化实验,建立了加速溶剂萃取-凝胶净化色谱-气相色谱质谱法测定农用地土壤中23种有机氯农药的检测方法。结果表明,方法检出限为0.0034~0.0052 mg/kg;对化合物质量分数为0.25 mg/kg的土壤加标样品进行平行实验,回收率为82.0%~93.7%;测定结果的相对标准偏差（RSD）≤8.7%。对土壤有证标准质控样品进行分析,测定结果均在验收范围之内。该方法准确可靠,灵敏度较高,样品净化效果较好,能够满足农用地土壤中有机氯农药残留痕量分析的要求。     

Chloroacetic acids in European soils and vegetation

Trichloroacetic acid (TCA) and dichloroacetic acid (DCA) are possible minor atmospheric degradation products of perchloroethylene and trichloroethylene, respectively. These acids may be wet- or dry-deposited from the atmosphere to land surfaces and hence possibly affect plant growth. However, the existing database on TCA levels in soil is limited to a few studies carried out in the late 1980's and the early to mid-1990's and it was concluded that there is a need for further measurements of concentrations of TCA and DCA in soils. In this study soil samples from 10 locations in 5 European countries, as well as vegetation samples, and a limited number of rainwater and air samples were collected and analysed for DCA and TCA to determine the concentrations of these compounds. An isotope dilution method using GC-MS was used for the determination of these acids in the samples. The method was briefly validated and the performance characteristics are presented. The results of the analysis of the soil samples show that the DCA and TCA concentrations in soil from different sites in Europe are more or less comparable, with the exception of Germany, especially Freudenstadt, where significantly higher TCA concentrations (up to 12 microg kg(-1) dw) were found. The average DCA and TCA concentrations in soil in this study were 0.25 +/- 0.12 and 0.64 +/- 1.40 microg kg(-1) dw, respectively. Generally, the concentration in soils from forest areas are about twice those from open-land areas. The DCA and TCA concentrations in vegetation samples ranged from 2.1 to 73 microg kg(-1) dw for DCA and from 4.7 to 17 microg kg(-1) dw for TCA. Thus, the concentrations in vegetation samples are 10-20 times higher than the soil concentrations. DCA and TCA concentrations in wet deposition samples and air samples collected in The Netherlands were 0.14 and 0.15 microg l(-1) for wet deposition samples and <0.5 and 0.7 ng m(-3) for air samples respectively. For these samples taken in The Netherlands, the estimated values for soil and air concentrations calculated from the wet deposition concentrations are in agreement with the concentrations measured in this study.     

Method for the determination of sub-ppm concentrations of perfluoroalkylsulfonate anions in water

The determination of sub-ppm concentrations of aqueous perfluoroalkylsulfonate (PFSt) anions, including perfluorooctylsulfonate (PFOS), has been accomplished with a relatively simple mass spectrometric procedure that does not require extraction of the analytes into an organic solvent or a chromatographic separation prior to injection into the negative-ion electrospray ionization mass spectrometer. Sample pretreatment was minimized and consisted of dilution of the aqueous samples of groundwater, surface water, tap water, and distilled water with acetonitrile, addition of dodecylsulfate (DDS) as an internal standard, and, in some cases, addition of known amounts of perfluorobutylsulfonate (PFBS) or PFOS for standard-addition experiments. The linear-response range for PFOS is 25.0 microg L(-1) to 2.5 mg L(-1). The lower limit of this range is three orders of magnitude lower than an equally straightforward chromatographic method. The relative errors for standard aqueous solutions containing only 25.0 microg L(-1) and 2.5 mg L(-1) PFOS are +/- 14% and +/- 7%, respectively, with 133 microg L(-1) DDS as the internal standard. The detection limit and quantification limit for PFOS in these standards are 5.0 microg L(-1) and 25.0 microg L(-1), respectively. Six different PFS anions, containing three to eight carbon atoms, were identified and quantified in an aqueous film-forming foam (AFFF) formulation using the method of standard additions. Two alkylsulfate anions and two perfluoroalkylcarboxylate anions were also identified in the AFFF formulation.     

Wetland soil and vegetation bismuth content following experimental deposition of bismuth pellets

Bismuth pellets have been approved as a non-toxic alternative to lead pellets in Canada since 1997 but, to our knowledge, there is little literature for soil and vegetation bismuth content in areas of bismuth pellet deposition. The present study addresses this shortcoming by measuring wetland soil and vegetation bismuth content following experimental deposition of bismuth pellets under ambient and experimentally increased acidic deposition conditions. We manipulated 24 plots in a fully factorial design (bismuth shot x soil acidification) in a south-eastern Ontario freshwater wetland during 1999-2003. Soil pH (range 6.5-7.3) increased significantly (p = 0.001) during the experimental period but there were no significant differences amongst treatments (p = 0.79). Significantly (p < 0.05) greater bismuth concentrations were measured in soil receiving bismuth pellets (mean +/- SE, n = 6; with acidification = 2.55 +/- 1.02 microg Bi g(-1) dry mass [DM]; without acidification = 6.40 +/- 2.23 microg Bi g(-1) DM) compared to plots that were not seeded with bismuth pellets (without acidification = 0.42 +/- 0.09 microg Bi g(-1) DM; with acidification = 0.39 +/- 0.10 microg Bi g(-1) DM). Nevertheless, bismuth levels in 20 of 24 aboveground tissue samples from the Carex lacustris-Agrostis scabra community were below detection levels (0.057 microg Bi g(-1) DM); the other samples ranged from 0.065 to 0.095 microg Bi g(-1) DM, similar to global background levels. Primary productivity in plots receiving bismuth pellets and soil acidification was not significantly (p = 0.15) different to vegetation in plots that were not manipulated. The results suggest bismuth mobilization from bismuth pellets into soil but not to aboveground vegetation.     

Impact of automobile emissions on the levels of platinum and lead in Accra,Ghana

Examination of car fleet records in Accra demonstrates an increasing proportion of catalytic converter-equipped cars in the relatively old car fleet (average age 13 years) due to their import from developed countries. However, only leaded petrol is sold in Ghana. Lead anti-knocking additives, which are known to affect catalyst activity and promote thermal sintering and mechanical abrasion, may increase Pt emissions. This possible synergism prompted the concomitant determination of Pb and Pt levels in road dust and roadside soils in Ghana. Both metals followed traffic density with higher concentrations in urban areas compared to remote sites. In urban areas, the range for Pb (365 +/- 93 microg g(-1) for dust and 291 +/- 76 microg g(-1) for soil) reflects precatalyst levels in Europe and the US, while the range for Pt (39 +/- 24 ng g(-1) for dust and 15 +/- 5.3 ng g(-1) for soil) is typical for the same countries. The elevated Pt concentrations were unexpected due to recent introduction of catalysts to Ghana compared to the prolonged use of catalysts in Europe and the US.