Seasonal analysis of the generation and composition of solid waste: potential use—a case study

Ensenada health officials lack pertinent information on the sustainable management of solid waste, as do health officials from other developing countries. The aims of this research are: (a) to quantify and analyze the household solid wastes generated in the city of Ensenada, Mexico, and (b) to project biogas production and estimate generation of electrical energy. The characterization study was conducted by socioeconomic stratification in two seasonal periods, and the biogas and electrical energy projections were performed using the version 2.0 Mexico Biogas Model. Per capita solid waste generation was 0.779?±?0.019 kg per person per day within a 98 % confidence interval. Waste composition is composed mainly of food scraps at 36.25 %, followed by paper and cardboard at 21.85 %, plastic at 12.30 %, disposable diapers at 6.26 %, and textiles at 6.28 %. The maximum capacity for power generation is projected to be 1.90 MW in 2019. Waste generated could be used as an intermediate in different processes such as recycling (41.04 %) and energy recovery (46.63 %). The electrical energy that could be obtained using the biogas generated at the Ensenada sanitary landfill would provide roughly 60 % of the energy needed for street lighting.     

An evaluation of alternative household solid waste treatment practices using life cycle inventory assessment mode

Waste disposal is an important part of the life cycle of a product and is associated with environmental burdens like any other life-cycle stages. In this study, an integrated assessment for solid waste treatment practices, especially household solid waste, was undertaken to evaluate the impact contribution of household solid waste treatment alternatives towards the sustainable development by using Life Cycle Inventory Assessment method. A case study has been investigated under various possible scenarios, such as (1) landfill without landfill gas recovery, (2) landfill with landfill gas recovery and flaring, (3) landfill with landfill gas recovery and electric generation, (4) composting, and (5) incineration. The evaluation utilized the Life Cycle Inventory Assessment method for multiple assessments based on various aspects, such as greenhouse gas emission/reduction, energy generation/consumption, economic benefit, investment and operating cost, and land use burden. The results showed that incineration was the most efficient alternative for greenhouse gas emission reduction, economic benefit, energy recovery, and land use reduction, although it was identified as the most expensive for investment and operating cost, while composting scenario was also an efficient alternative with quite economic benefit, low investment and operating cost, and high reduction of land use, although it was identified as existing greenhouse gas emission and no energy generation. Furthermore, the aim of this study was also to establish localized assessment methods that waste management agencies, environmental engineers, and environmental policy decision makers can use to quantify and compare the contribution to the impacts from different waste treatment options.     

The composition, trend and impact of urban solid waste in Beijing

This paper provides an overview of the trend of generation, composition, and management of municipal solid waste, and estimates the carbon emissions arising from municipal solid waste management in Beijing. The correlation analysis conducted shows that the generation of municipal solid waste in Beijing has been growing steadily, showing high correlations (r > 0.9) to the total GDP, per capita income, and the population. Food waste showed an increasing trend since 1990. Compared with the results of an investigation in 1990, ash and woodchips content in 2003 declined from 56% to 17%, while the percentage of paper and plastic increased from 10% to 29% over the same period. The calorific value of the municipal waste also increased, from 2,686 kJ/kg in 1990 to 4,667 kJ/kg in 2003, indicating that the waste is suitable for incineration. Currently, the source separation ratio of municipal waste is approximately 15%. About 94% of all the collected solid waste goes to the landfill while 4% is composted and 2% is incinerated. A moderate garbage collection fee is applied to both permanent and temporary residents in Beijing, but the willingness to pay for solid waste collection and treatment is still low. Under current treatment mode, the total amounts of carbon emission from waste disposal sites and incineration increased with the increase of municipal solid waste, from 29.8 Gg in 1990 to 84.5 Gg in 2003, including 83.3 Gg of CH₄ and 22.0 Gg of CO₂. The data availability and methodological challenges in monitoring the quantity and characteristics of municipal solid waste are discussed.     

The potential of biogas production from municipal solid waste in a tropical climate

The objective of this study was to estimate the potential of organic municipal solid waste generated in an urban setting in a tropical climate to produce biogas. Five different categories of wastes were considered: fruit waste, food waste, yard waste, paper waste, and mixed waste. These fractions were assessed for their efficiency for biogas production in a laboratory-scale batch digester for a total period of 8 weeks at a temperature of 15–30 °C. During this period, fruit waste, food waste, yard waste, paper waste, and mixed waste were observed to produce 0.15, 0.17, 0.10, 0.08, and 0.15 m³ of biogas per kilogram of volatile solids, respectively. The biogas produced and caloric value of each feedstock was in the range of 1.25?×?10^?3 m³ (17 kWh)/cap/day (paper waste) to 15?×?10^?3 m³ (170 kWh)/cap/day (mixed waste). Paper waste produced the least (<1×10^?3(<17.8 kWh)/cap/day), and mixed waste produced the highest methane yield (10?×?10^?3 m³ (178 kWh)/cap/day). Thus, mixed waste was found to be more efficient than other feedstocks for biogas and methane production; this was mainly related to the better C/N ratio in mixed waste. Taking the total waste production in Jimma into account, the total mixed organic solid waste could produce 865?×?10³ m³ (5.4 m³/capita) of biogas or 537?×?10³ m³ (3.4 m³/capita) of methane per year. The total caloric value of methane production potential from mixed organic municipal solid waste was many times higher than the total energy requirement of the area.     

The effects of socioeconomic parameters on household solid-waste generation and composition in developing countries (a case study: Ahvaz,Iran)

Environment problems associated with the generation of waste are part of societal changes where households play an important role. These societal changes influence the size, structure and characteristic of given households. For the effective planning of solid-waste handling infrastructure, it is essential to know the quantity of waste generation and its composition. This paper presents the findings of a study carried out in an urban municipal area in Iran to determine the household solid-waste generation rate and waste composition based on field surveys and to determine the related socioeconomic parameters. The dependent variables were waste generation and composition, and independent variables were family size, family employment, age, number of room and education. Over 400 sample households were selected for the study using a stratified random sampling methodology and from five different socioeconomic groups. Waste collected from all groups of households were segregated and weighted. Waste generation rate was 5.4 kg/household/day. Household solid waste comprised of ten categories of wastes and with the largest component (76.9%). The generation and composition of household solid waste were correlated with family size, education level and households income. This paper adequately suggests new insights concerning the role of socioeconomic parameters in affecting the generation of household waste.     

Municipal solid waste generation in growing urban areas in Africa: current practices and relation to socioeconomic factors in Jimma, Ethiopia

As one of cities in the developing countries, a rapid population growth and industrial activities pose many environmental challenges for Jimma city, Ethiopia. One aspect of urban growth posing a threat on sustainable development is poor solid waste management, which results in environmental pollution. The purpose of this study is to evaluate the quantity, composition, sources of waste generated, their current disposal practices, and to recommend appropriate management technologies. The total waste generated daily in Jimma city was ca. 88,000 kg, and the average per capita generation rate was 0.55?±?0.17 kg/capita/day. Eighty-seven percent of the waste was produced by households and 13% by institutions, and a negligible fraction (0.1%) was generated by street sweepings. During the rainy season, 40% more waste was generated than in the dry season because of the increased availability of agricultural food product. Further analysis showed that biodegradable organic waste constitutes 54% by weight with an average moisture content of 60% that falls within the required limits for composting. The nonbiodegradable components constitute 46% of which 30% of it was nonrecyclable material. Only 25% of the community uses municipal containers for disposal at the selected landfill site. Fifty-one percent of the households disposed their waste in individually chosen spots, whereas 22% burned their waste. Finally 2% of households use private waste collectors. The socioeconomic analysis showed that higher family income and educational status is associated more with private or municipal waste collection and less with the application of backyard or open dumping. These insights into generated waste and management practice in Jimma city allow making suggestions for improved collection, treatment, and disposal methods. A primary conclusion is that the biodegradable waste is a major fraction having suitable properties for recycling. As such an economic benefit can be obtained from this waste while avoiding the need for disposal.     

Municipal solid waste management in Thailand and disposal emission inventory

The increasing municipal solid waste (MSW) generation along with the high fraction of organic waste and a common disposal of open dumping is the current scenario in many areas in Thailand. As a response to this problem, the country’s Pollution Control Department (PCD) aims to reduce the MSW generation rate to less than 1 kg/capita/day, increase the collection efficiency, and improve the recovery of recyclables. For many years, more than 60% of the solid waste disposal system in Thailand has been carried out by open dumping. According to the survey conducted by this study, in 2004 there were 425 disposal sites (95 landfills; 330 open dumps) in Thailand and an estimated methane emission of 115.4 Gg/year was generated based on this practice. It has been estimated that the anticipated methane emission in Thailand will rise from 115.4 Gg/year to 118.5 Gg/year if the largest open dumpsites in provinces with no existing landfill are upgraded to sanitary landfill; and it will increase to 193.5 Gg/year if the existing sanitary landfill is upgraded to integrated waste management facilities. Moreover, Bangkok metropolitan have the highest methane emission (54.83 Gg/year) among all the regions in Thailand. The methane emission forecast of 339 Gg/year by 2020 (based on LandGEM methodology) provides a stimulus to create a comprehensive plan to capture and utilize methane as an energy source.     

Monitoring quantity and characteristics of municipal solid waste in Dhaka City

A reliable estimate of the quantity of solid waste generation in the city is very important for proper solid waste planning and management. However, reported estimates of solid waste generation vary widely and lead to questionability. The reported values have been derived on the assumption of demography, standard rate of waste generation by households, density values, number of trucks engaged for waste transportation and monitoring of truck movement at dump sites, etc. This diverse nature of the available data and the question of accuracy necessitate a rigorous study that has tried to document the waste quantity in the recently formulated master plan of Dhaka City. The socio-economic parameters, behavioral characteristics, generation sources, seasonality, and per capita growth rate are considered in estimating the waste quantity along with its future projections. The findings from the estimation of waste quantities state that seasonal differences in the municipal solid waste stream are not substantial. The most seasonably variable material in the municipal solid waste stream is food waste. Residential waste is relatively homogeneous. Although there are some differences in waste generation depending on demographic and other local factors, most households dispose of essentially similar types of wastes. Variation occurs in waste composition dependent upon income levels and category of sources. Variation also occurs based upon the extent of source reduction and recycling opportunities. As opportunities exist to recycle wastes, the recycling facilities might have to grow at a similar pace to the generation of waste. Physical and chemical characteristics of solid waste are important to implement the waste disposal and management plan for the selection of resource and energy recovery potentials. A number of studies have been conducted to determine the composition of wastes including moisture content and calorific value. The data show that the moisture content in city waste is significantly higher and the calorific value is much lower, which determines the viability of composting or anaerobic digestions rather than waste combustion.     

Impacts and mitigation measures of plastic waste: A critical review

Overwhelmed plastic waste has been gradually appreciated as a global problematic issue. Scientific efforts either dedicated to comprehending its distribution and detrimental impacts on the environment or management measures to contain it. However, there is a concern asymmetry between the knowledge of detrimental impacts of plastic waste and corresponding mitigation measures. Microplastics in the marine ecosystem is the foremost research hotspot in terms of plastic waste's detrimental impacts. Recycling plastic waste is the utmost research topic in terms of plastic waste management. Plastic pollutants derived from plastic waste contaminates the environment and ultimately threatens human health. Current measures aimed at reducing the plastic waste ended in the environment via recycling, and emphasised its retention of material value via circular economy. However, these measures did not prioritise taking direct action to mitigate the threats to human health. This review aims to bridge these two research ends of plastic waste that provides a holistic view of this problematic issue.The keywords analysis function in VOSviewer is adopted in this study to map out the state-of-the-art of existing research in plastic waste. Four research mainstreams are highlighted: (1) Environmental concerns of plastic waste in aquatic ecosystems; (2) Potential threats to human health; (3) Plastic waste reduction options and recycling methods; (4) Plastic waste thermochemical treatment. Consequently, a future research agenda is proposed.     

Assessment of potential impacts of municipal solid waste treatment alternatives by using life cycle approach: a case study in Vietnam

In Vietnam, most of municipal solid waste (MSW) is disposed of at open dumping and landfill sites, and the methane gas from waste is the un-ignorable source of greenhouse gas (GHG) emission. It is indispensable to explore the possibility for GHG mitigation in MSW management. The objective of this study was to estimate alternative waste treatment practices towards the GHG emission mitigation, energy consumption and generation, reduction of landfill volume, and various benefits for proposing the appropriate selection by scenario analyses for representative Vietnam’s cities. Impacts were calculated by utilizing life cycle assessment (LCA) method. A literature review survey on the current applicability of LCA database for assessing impacts from waste sector in developing countries, especially for Vietnam, was carried out. This study assessed the contribution of alternative solid waste treatment practices. The result showed that, except investment and operation costs, incineration with energy recovery seems the suitable alternative for treating waste from representative cities of Vietnam according to reduction of GHG emission and waste burden to landfill sites and energy recovery and generation. Besides, MSW composition was identified as an important factor directly influencing to impacts as well as other products and benefits of waste treatment alternatives. Reliable data on waste composition are indispensable for assessing to choose, improve, or plan the waste treatment practices towards sustainable development.     

IOWLAD-based MCDM model for the site assessment of a household waste processing plant under a Pythagorean fuzzy environment

Household waste pollution is the main restrictive factor for urban development that leads to an increase in calorific value and decrease in disposal capacity. To deal with the demand derived from household waste, the development of a new household waste processing plant is necessary, with site assessment being an issue of primary consideration. In this study, to evaluate alternatives, we proposed a multiple-criteria decision-making framework based on the Pythagorean fuzzy induced ordered weighted logarithmic averaging distance (PFIOWLAD) operator. For this purpose, during the decision-making process, we extend the induced ordered weighted logarithmic averaging distance (IOWLAD) operator to the Pythagorean fuzzy set (PFS), which can deal with uncertain information. Then, an illustrative case including five criteria, namely, construction cost, impact on the cost of retrofitting existing household waste processing plants, traffic efficiency, impact on surrounding residents, and refuse processing capacity equilibrium, along with five alternatives in Shanghai is investigated. The robustness and effectiveness of the proposed framework are verified by comparing the results with those determined using the previous approaches.     

Contamination by perfluorinated compounds in water near waste recycling and disposal sites in Vietnam

There are very few reports on the contamination by perfluorinated chemicals (PFCs) in the environment of developing countries, especially regarding their emission from waste recycling and disposal sites. This is the first study on the occurrence of a wide range of PFCs (17 compounds) in ambient water in Vietnam, including samples collected from a municipal dumping site (MD), an e-waste recycling site (ER), a battery recycling site (BR) and a rural control site. The highest PFC concentration was found in a leachate sample from MD (360 ng/L). The PFC concentrations in ER and BR (mean, 57 and 16 ng/L, respectively) were also significantly higher than those detected in the rural control site (mean, 9.4 ng/L), suggesting that municipal solid waste and waste electrical and electronic equipment are potential contamination sources of PFCs in Vietnam. In general, the most abundant PFCs were perfluorooctanoic acid (PFOA), perfluorononanoic acid (PFNA), and perfluoroundecanoic acid (PFUDA; <1.4–100, <1.2–100, and <0.5–20 ng/L, respectively). Interestingly, there were specific PFC profiles: perfluoroheptanoic acid and perfluorohexanoic acid (88 and 77 ng/L, respectively) were almost as abundant as PFOA in MD leachate (100 ng/L), whereas PFNA was prevalent in ER and BR (mean, 17 and 6.2 ng/L, respectively) and PFUDA was the most abundant in municipal wastewater (mean, 5.6 ng/L), indicating differences in PFC contents in different waste materials.     

Relation of waste generation and composition to socio-economic factors: a case study

To develop an effective waste management strategy for a given region, it is important to know the amount of waste generated and the composition of the waste stream. Past research has shown that the amount of waste generated is proportional to the population and the average mean living standards or the average income of the people. In addition, other factors may affect the amount and composition of waste. These are climate, living habits, level of education, religious and cultural beliefs, and social and public attitudes. This paper presents the findings of a study carried out in a suburban municipal area in Sri Lanka to determine the solid waste generation rate and waste composition based on field surveys and to determine the related socio-economic factors. A database was developed that included information on the quantity and composition of waste generated in a sample of households in the study area over a time period. The collected data was analysed to relate waste generation and composition data to various socio-economic factors. Over 400 sample households were selected for the study using a stratified random sampling methodology based on municipal wards and property values. A technique that considers both the number of households in a particular income group (property value range) and the standard deviation of property values within a given income group was used to determine the appropriate sample size for each municipal ward. Through category and regression analyses, the quantities of waste and waste composition were related to several socio-economic factors. The paper describes the basis for the sample selection, the methodology adopted for data collection, the socio-economic parameters used for the analysis, and the relationships developed from the analysis.     

Pre-incubation in soil improves the nitrogen fertiliser value of hair waste

Global generation of human hair waste and its disposal at landfills could contribute to the leaching of nitrates into ground water. High concentrations of nitrogen (N) and other elements suggest that the waste could be a source of plant nutrients and differences in ethnic hair types could affect nutrient release and fertiliser value. The objective of this study was to determine the effects of hair type, as an N source, and pre-incubation time on dry-matter yield, nutrient uptake by spinach (Spinacia oleracea L.) and residual soil nutrients. Salons in Pietermaritzburg provided bulk African and Caucasian hair waste, without distinguishing age, sex, health status or livelihood of the individuals. The hair waste was analysed for elemental composition. A pot experiment was set up under glasshouse conditions. The hair waste was incorporated (400 kg N ha^?1) into a loamy oxisol and pre-incubated for 0, 28, 56 and 84 days before planting spinach. Potassium (K) and phosphorus (P) were corrected to the same level for all treatments. Spinach seedlings were then cultivated for 6 weeks. Shoot dry-matter and the uptake of all nutrients, except P, were increased by the pre-incubation of hair. African hair pre-incubated for 28 days resulted in greater dry-matter, N, K, Mn and S uptake than Caucasian hair. Increasing pre-incubation resulted in a decline in the residual soil pH and exchangeable K. The findings suggested that pre-incubation improves the N fertiliser value of hair and that African hair has greater value than Caucasian hair when pre-incubated for a short period.     

Management of hospitals solid waste in Khartoum State

This research had been conducted during year 2012 to review existing data on hospital waste management for some of Khartoum town hospitals and to try to produce appropriate proposals acceptable for waste management and final treatment methods. The overall status of hospital waste management in Khartoum has been assessed through direct visits and designated questionnaires. Eight main hospitals were covered in the study with an overall bed capacity of 2,978. The current waste management practice observed at all studied hospitals was that most of waste, office, general, food, construction debris, and hazardous chemical materials were all mixed together as they are generated, collected, and finally disposed of. Only a small portion of waste in some hospitals (part of potentially infectious, body parts, and sharps) are collected separately and treated in a central incinerator. The estimated value of per bed generation rate in the studied hospitals was found to be 0.87 kg/day, which lies within the range for the low-income countries. In all studied hospitals, it was found that workers were working under very poor unsafe conditions with very low salaries ($35 to $45 per month on average). About 90 % were completely illiterate or had very low education levels. At the national level, no laws considering hospital waste, or even hazardous waste, were found; only some federal general environmental regulations and some procedures from town and city localities for controlling general municipal waste exist. At the hospital level, no policies or rules were found, except in the radiotherapy center, where they manage radioactive wastes under the laws of the Sudanese Atomic Agency. Urgent actions are needed for the remediation and prevention of hazards associated with this type of waste.     

新型冠状病毒肺炎疫情医疗废物应急管理与处置

基于我国新型冠状病毒肺炎疫情医疗废物应急管理与处置体系建立过程，分析疫情初期医疗废物管理与处置短板，预测医疗废物产生量随患者人数发展的变化，提出医疗废物突出问题的解决方案。结果表明：及时构建重大疫情医疗废物全过程应急管理与处置技术体系有利于促进医疗废物分类分流管理与处置，迅速提升医疗废物应急处置能力；修正湖北省涉疫情医疗废物和医疗废物平均产生系数分别为3.35 kg/（人·d）和5.15 kg/（人·d）；截至2020年6月6日，全国医疗废物处置能力从疫情前的4 902.8 t/d增至6 245.4 t/d，湖北省具备的医疗废物处置能力由疫情前的180 t/d增至667.4 t/d；疫情期间积累的医疗废物应急管理与技术经验对后疫情时期建立和强化医疗废物应急管理与处置机制具有借鉴意义。     

Factors affecting waste generation: a study in a waste management program in Dhaka City, Bangladesh

Information on waste generation, socioeconomic characteristics, and willingness of the households to separate waste was obtained from interviews with 402 respondents in Dhaka city. Ordinary least square regression was used to determine the dominant factors that might influence the waste generation of the households. The results showed that the waste generation of the households in Dhaka city was significantly affected by household size, income, concern about the environment, and willingness to separate the waste. These factors are necessary to effectively improve waste management, growth and performance, as well as to reduce the environmental degradation of the household waste.     

农村生活垃圾产生特征及分类收集模式

以南京市高淳县的一个村为研究对象，依托新建的农村生活垃圾分类收集系统，对该区域生活垃圾的产生量、组成成分及其动态变化进行了调查研究，从垃圾分类收集模式的运行效果和经济可行性对其进行了分析。结果表明，该地区农村人均垃圾产生量为0.4 kg/d ，但随季节有一定的波动，这主要是由食品类消费的季节性变动而引起。垃圾组成以有机垃圾为主，约占55%，可回收垃圾、其他垃圾和有害垃圾所占比例分别为30.5%、14.2%和0.34%。通过认真的宣传和指导，村民在较短的时间内基本都可以做到正确分类；垃圾分类收集系统的户均建设成本为21元，运行费用比分类收集前每户每月增加3.2元 。     

Plastic litter accumulation on high-water strandline of urban beaches in Mumbai, India

Today, almost every beach on every coastline is threatened by human activities. The inadequate recycling and poor management of waste in developing countries has resulted in considerable quantities of plastic contaminating beaches. Though India has long coastline of 5,420 km along the mainland with 43 % of sandy beaches, data on litter accumulation, particularly the plastics, which are one of the most common and persistent pollutants in marine environment, are scanty. The abundance and distribution of plastic litter was quantitatively assessed in four sandy beaches in Mumbai, India, bimonthly from May 2011 to March 2012. Triplicates of 2?×?2 m (4 m²) quadrats were sampled in each beach with a total of 72 quadrats. Overall, average abundance of 11.6 items m^?2 (0.25–282.5 items m^?2) and 3.24 g m^?2 (0.27–15.53 g m^?2) plastic litter was recorded in Mumbai beaches. Plastic litter accumulation significantly varied temporally and spatially at p?=?0.05. Significantly higher plastic litter accumulation was recorded in Juhu beach. Furthermore, the highest abundance by weight was recorded in November and May numerically. More than 80 % of plastic particles were within the size range of 5–100 mm both by number and weight. Moreover, coloured plastics were predominant with 67 % by number of items and 51 % by weight. Probably, the intense use of beaches for recreation, tourism, and religious activities has increased the potential for plastic contamination in urban beaches in Mumbai.     

Application of the IPCC Waste Model to solid waste disposal sites in tropical countries: case study of Thailand

Measurements of landfill methane emission were performed at nine solid waste disposal sites in Thailand, including five managed sanitary landfills (four deep and one shallow landfills) and four unmanaged landfills (three deep and one shallow dumpsites). It was found that methane emissions during the rainy season were about five to six times higher than those during the winter and summer seasons in the case of managed landfills and two to five times higher in the case of unmanaged landfills. Methane emission estimate using the Intergovernmental Panel on Climate Change (IPCC) Waste Model was compared with the actual field measurement from the studied disposal sites with methane correction factors and methane oxidation factors that were obtained by error function analysis with default values of half-life parameters. The methane emissions from the first-order decay model from the IPCC Waste Model yielded fair results compared to field measurements. The best fitting values of methane correction factor were 0.65, 0.20, 0.15, and 0.1 for deep landfills, shallow landfills, deep dumpsites, and shallow dumpsites, respectively. Using these key parameters in the case of Thailand, it was estimated that 89.22 Gg of methane were released from solid waste disposal sites into the atmosphere in 2006.